SPL REPAIR OF BLDG NO P-443 (OFFR MESS STAFF LIVING) AND P-437 (HQ COY) OR LIVING OF 1 NAGA (DRAS) AND SPL REPAIR TO FIRST FLOOR OF BLDG NO P-154 OF 661 ARMY AVN SQN (RO) UNDER GE (W) JRC

Amount

Taking down chowkhats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkhats or frames with shutters exceeding 1.5 sqm but not exceeding 4 sqm each (without taking off shutters from the frames), complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed.

Dismantling of cast iron pipes of 100mm dia, jointed in cement mortar and taking out of trenches, if required, complete all as specified and directed.

Dismantling of cast iron pipes of 75mm dia, jointed in cement mortar and taking out of trenches, if required, complete all as specified and directed.

Taking down eaves gutter and rain water pipes (any size and pattern), including all fittings, heads, shoes, bends, swan necks, etc. removal from site (measured overall as fixed along the centre line or fittings and accessories) complete all as specified and directed.

Dismantling PVC water tank of capacity 500 Ltr and S&F new rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

Dismantling PVC water tank of capacity 2000 Ltr and S&F new rotational moulded polyethylene water storage tank of capacity2000 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

Taking up or down Steel Tubing bore of pipe in 15mm and connections, including cleaning for refixing or removal to store etc, complete all as specified and directed.

All as per description of item No 10.00 above but of 20mm bore, complete all as specified and directed.

Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving not exceeding 15cm thickness (below or above ground level) etc, complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Demolition of reinforced cement concrete(reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Dismantling of Brick tiles or terracing tiles, single layer on roofs, complete all as specified and directed.

Demloition of Mud in roof , any thickness , including plastering and leeping (whether full thickness removed or a part thereof, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

All as per description of item No 18.00 above but except bricks etc, complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks using old size bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L for roughening surfaces of old/concrete floor by backing sweeping clean and washing down with water etc, complete all as specified and directed.

M&L for PCC padding 1:2:4, type B-1(using 20 mm garded stone aggregate) as in roof padding inspecified slope, complete all as specified and directed.

M&L for cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exceeding 10 cm girth, complete all as specified and directed.

M&L for applying a primer with SmartCare Epoxy Primer to seal the pores and enhance the adhesion of the coating. Supplying and applying High build elastomeric waterproofing coating based on pure, hydrophobic polyurethane SmartCare PU Magnum, cold applied of spray / brush applied, membrane with an elongation of 280% and tensile strength of 2.7 N/mm2 as per ASTM D 2370, crack bridging ability of 3 mm as per ASTM C1305, no leakage upto 5 bars of water pressure as per DIN 1048, shore A Hardness of min. BO as per ASTM D 2240. The SRI of the coating shall be 106. The minimum thickness to be applied shall be 1.5mm.

M&L for providing & laying of protective Geotextile fabric 120GSM over the entire membrane with proper overlaps.

M&L for PCC screed concrete 1:2:4, type B-0(using 12.5 mm garded stone aggregate) of average thickness 40 mm to be provided in slope, mixed with graded fibrillated 100% virgin poly propylene fibres in concrete at the rate of 0.90 Kg/cum and admixed with integral waterproofing compound as per manufacturers specifications, complete all as specified and directed. Note : - virgin poly propylene fibres and waterproofing compound shall be measured and paid separately.

Supply only graded fibrillated 100% virgin poly propylene fibres.Integral waterproofing compound, complete all as specified and directed.

Supply only integral waterproofing compound, complete all as specified and directed.

M&L for for applying a tack coat of industrial bitumen 85/25at the rate of 1.2 kg/sqm including cleaning of surface, complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application, over a coat of hot blown bitumen 85/25 @ 1.20 kg/Sqm, complete all as specified and directed.

M&L for cement concrete type E-2 1:5:10 (using 40mm graded brick aggregate ) as in sunken flooring, complete all as specified and directed.

M&L for 15mm thick plasteing in CM (1:3) with WPC on walls as on sunken floor finished even and smooth using extra cement complete all as specified and direced by Engineer-In-Charge.(Note-After doing the plaster testing be carried out by ponding (for 72 hrs) the sunken portion before further treatment to the sunken slab.any leakage/seepage obserbed shall be rectified before carrying out water proofing treatment).

M&L for cement concrete type E-2 1:5:10 (using 40mm graded brick aggregate ) as in sunken flooring, complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4(20 mm graded) in roof kerbs or mud stops rounded or chemfered edges, complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0(using 12.5mm graded stone aggregate) as in flooring, finished even and rough to receive the topping layer, complete all as specified and directed.

M&L for joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, laid over and including15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 sqm, in floors etc, laid over and including15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for coloured glazed ceramic tiles 7-8 mm thick, area of each tiles not exceeding 0.36 sqm in vertical surfaces of walls, laid over and including 10mm thick cement plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match , complete all as specified and directed.

M&L for joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

All as per description of item No 40.00 above but in vertical surfaces such as skirtings, dados and risers to steps etc, laid over and including 10mm thick cement plaster in CM 1:4, complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 450x300x7 mm thick laid over and including 10mm thick cement plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match , complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to, complete all as specified and directed.

All as per description of item No 43.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders, complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal/sloping), fair finished surfaces concrete flat, complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span including necessary formwork, complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and including cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.

S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc, complete all as specified and directed.

All as per description of item No 50.00 above but of size of 20mm bore, complete all as specified and directed.

All as per description of item No 50.00 above but except GI pipe, complete all as specified and directed.

All as per description of item No 50.00 above but except GI pipe 20mm bore, complete all as specified and directed.

S&F in repair Vitreous China Wash Basin with full pedestal, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc complete all as specified and directed including 15 mm dia Pillar taps, cast copper alloy with capstan heads swan neck Chromium Plated, screwed down high pressure, with or without lettered with long screwed shanks and fly-nuts, screwed for iron pipe but fancy type and fixed etc, complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices with recessed bottom, jet spray, etc, complete all as specified and directed.

S&F in repair Low Level Flushing cistern PVC valveless syphonic action type, 10 ltrs capacity including supply pipe & fixing brackets of M.S. angle of size (25mmx25mmx3mm), 30 cm long in PCC (1:2:4) type B-1, block of size (10cmx10cmx10cm) on walls etc, complete all as specified and directed.

S&F vitreous china counter top Wash Basin, snow white, oval type of size 490mm x 400mm x 150mm including long body pillar tap of height not less than 300mm, waste pipe, coupling etc, complete all as specified and directed.

S&F in repair Coupled Closet WC colour, Bowl for Coupled WC with UF soft close slim seat cover, Hinges, Fixing Accessories and Accessories Set. Size and colour to be approved by Engineer-In-Charge, complete all as specified and directed by the Engr-in-Charge.

S&F in repairs vitreous china Urinal, Half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, complete all as specified and directed.

S&F in repairs vitreous china urinal partition white of size 310x700 mm, complete all as specified and directed.

S&F waste coupling including waste pipe suitable for urinals, bore dia of discharge pipe 32mm of PTMT (half or full threaded), (Minimum weight 45gms), complete all as specified and directed.

S&F urinal spreader of brass chromium plated any colour for fixing with 15 mm dia pipe, complete all as specified and directed.

S&F in repair fancy type, brass chromium Plated stop valves/Angle valves, cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repair fancy type, brass chromium Plated stop valves/Angle valves with long shank and cup (concealed type), cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe and fixed, complete all as specified and directed.

M&L for chromium plated long body bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe fixed as in repairs including taking down old tap of any description, complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm etc, complete all as specified and directed.

S&F in repair gun-metal, globe or gate valves for 20mm bore dia of pipe, with iron wheel head, screwed both ends for iron pipe and fixed to steel pipe or union, , complete all as specified and directed.

Supply and fix in repairs shower rose of brass chromium plated with shower arm 195mm long with bend of 45 degree 15mm dia, complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F CP soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

Supply and fix Elegant arts Frame black synthetic Wood bath mirror one piece of size 90 Cm X60 Cm fixed to wall, complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints laid in trenches or in floors Complete all as specified and directed.

S&F 110 mm bore PVC(SWR) bend any radius, complete all as specified and directed.

S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

S&F PVC (SWR) floor trap of 75mm outlet dia, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to wall, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) 'P’ trap, complete all as specified and directed.

S&F PVC (SWR) floor trap of 110mm outlet dia, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F in repairs stack clamps for bore dia of pipe 100mm, made out of 50 mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

S&F in repairs stack clamps for bore dia of pipe 75mm, made out of 50 mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

M&L for framed work as in doors or gates and chowkhats of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe-410W(Gde E-165), complete all as specified and directed.

S&F factory made 2nd class hard wood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F factory made 2nd class HW 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed.

S&F solid PVC frame as in door, of size 50mm x47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube and edges will be painted to match with printed sheets, suppyling & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; & 5mm thick x 15mm wide PVC sheet beading use inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree)used. Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F butt hinges 100mm size, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed.

S&F stainless steel steel butt hinges cold rolled of size 100mm medium weight, complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250mm, complete all as specified and directed.

S&F Aluminium anodised,barrel tower bolts 200mm long of extruded section and fixed, complete all as specified and directed.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 150mm etc, complete all as specified and directed.

S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

M&L for preparation of new wood surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer, complete all as specified and directed.

Supply & fix factory made steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3.

All as per description of item No 101.00 above but window with glazed shutter.

S&F mild steel work as in as in grill gratings etc with ends of bars shouldered and or riveted or fixed in spike, framed guard bars barred iron doors ladders frame balusters walk ways confirming to Fe- 290, Gde E-165 complete all as specified and as directed.

Hacking out old broken glass (anythickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows/wodden doors, complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows/wodden doors as in repairs, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed.

S&F 6mm thick PVC hollow wall paneling plain/ coloured/ printed fixed with screws to wall and corner, edges of panels be sealed with appropriate arrangement, colour and pattern as approved by Engineer-in-Charge, complete all as specified and directed by the Engr-in-Charge.

S&F false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and pattern having moisture content not less than 2% humidity resistance of 99%. NRC 0.50 to 0.75 as per IS 8225: 1987, non-combustible as per BS 476 (Part-4)- 1970 and light refletance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per Sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000mm, cross- T size from 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per Sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasterners, 6 mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length-3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. The work shall be carried out as per specifications, drawing and as per directions of Engineer-In-Charge.

S&F 12mm thick frameless toughened glass door including stainless steel 'H' type handle-02 Nos, top pivot, bottom patch, top patch, floors prings, patch lock etc, complete in all respect, complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters,aluminium section weighing not less than 0.55 kg/m including necessary joining cleats,cglazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,canodised aluminum snap beading screws etc, complete all as specified and directed.

S&F powder coated (thickness or powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, sliding type or fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) etc. in each shutter, complete all as specified, complete all as specified and directed.

S&F anodised Aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer?in-charge.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and directed.

S&F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and directed.

S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and directed.

S&Fin repair epoxy powder coated pelmet rods of mild steel with and including pair of brackets & finials, complete all as specified and directed.

S&F,aluminium (aluminium body) door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed.

M&L for dugging out average 15mm thick on disturbed chajja beam, slab portion and applying chicken wire mesh over disturbed portion fixed with drilling bolting etc.after anti corrosion treatment of steel bar and finaly finished with 15mm thick (1:3) (in two layers) cement plaster, complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in plinth protection finished even and smooth (without using extra cement), complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors/path with grey cement and pigment to match, over and including 20mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for cement concrete type D2, 1:4:8(using 40mm graded aggregate) as in foundations, filling and mass concrete, complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls, finished fair and even, complete all as specified and directed.

M&L for 5mm thick Rendering in CM 1:3 on brick work or concrete surfaces on ceiling finished even and smooth without using extra cement etc, complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint, complete all as specified and directed.

M&L for preparation of new plastered surfaces and distempering walls with two coats of distemper oil emulsion, white or tinted over and including 1mm thick wall care putty including primer, complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coats of White Wash on ceiling etc, complete all as specified and directed.

All as per description of item No 132.00 above but over old surfaces of ceiling, including removal of existing treatment, complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil emulsion distemper white or tinted over and including 1mm thick wall care putty including primer, complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of cement base paint, complete all as specified and directed.

Taking down carefully aluminium / copper point wiring (light / fan / socket or power)/power wiring complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors Note : (i) The existing conduit of concealed wiring will not be removed from site and same will be reused for point wiring under respective item hereunder.(ii) The qty of serviceable/ unserviceable items will be ascertained by the BOO detailed by GE and serviceable items (such as LED fittings/LED tube and bulb /ceiling/ Exhaust Fans and geysers) will be refixed under respective item hereunder and unserviceable items such as switches, sockets, ceiling rose, holders, brackets, bulkhead fittings, LED fittings, MCB DBs, sunken boxes and fixtures etc. shall be issued to contractor under schedule of credit all as specified and directed.

Taking down unserviceable Submain/ Cable/ Service wire of any size as directed.

Taking down main switch / DB as directed.

M & L for concealed point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire including pressed steel sunken boxes for mounting of MODULAR TYPE switch/sockets and regulator and including modular type cover plate white colour all as specified and directed for:- One light / fan / call bell point controlled by one, one way switch.

One 3 pin socket out let 5 Amps on same board with other switches.

One 3 pin socket out let 5 Amps on Independent board with other switches.

All as per description of item No 139.00 above but with 2.5 sqmm multistranded copper multistranded conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board

M&L for point wiring with PVC insulated, unsheathed cable single core multistranded copper conductor FRLS cable 1.5 sqmm size, 1100V grade, drawn into existing PVC rigid concealed conduit medium grade (ISI marked) including PVC unsheathed cable single core copper FRLS conductor 1.5 Sqmm as continuous earth wire and including pressed MS sheet sunken box 1.6 mm thick with 3 mm thick laminated bakelite sheet all as specified. a) One light / fan / call bell point controlled by one, one way switch.

All as per description of item No 143.00 above but for 5 amps socket on independent board

All as per description of item No 143.00 above but for 5 amps socket on same board

S & F switch MODULAR 6 Amps, flush button type, SP, one way, 230 Volts, AC

S & F switch MODULAR 16 Amps, flush button type, SP, one way, 230 Volts, AC

S & F socket out let multipurpose MODULAR 5 pin 6 Amps, flush type, 230 / 250 Volts

S & F socket out let multipurpose MODULAR 5 pin 6/16 Amps, flush type, 230 / 250 Volts

S & F MODULAR fan regulator step type 120W, 02 module complete all as specified and directed.

S & F switch Piano 5 Amps, flush button type, SP, one way, 230 Volts, AC

S & F socket out let multipurpose 5 pin 5 Amps,230 Volts

Supply and Fixing stepped socket type electronic fan regulator and connecting up complete all as directed.

M & L ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified.

M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

M & L for sub main wiring with two single core PVC insulated and unsheathed cable 4 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of 20mm in size complete with all accessories alongwith provn of 4 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire.

M & L for sub main wiring with two single core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of 25mm in size complete with all accessories alongwith provn of 6 sqmm PVC insulated and unsheathed, multi stranded copper conductor , FRLS type cable as earth wire.

Supply and fix MCB DB, TPN 4 way double door with suitable 200 amps rated bus all as specified and directed.

S/F MCB TPN 40 Amps 415 volts complete all as specified and directed.

Supply and fix DB,double door, SPN 4 way for MCB, 240 volt with 200 amps rated bus bar.

S/F MCB SPN 40 to 63 Amps 240 volts

S/F MCB SP 6-32 Amps 240 volts

S&F in replacement LED tube light fitting 20W Box type including LED lamp 22 W with 2200 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed.

S&F LED mirror light 10Watt 2 feet complete all as specified and directed.

Supply & fixing in replacement LED Bldg security light fitting 35 Watt including LED lamp pressure die cast aluminum IP66 with surge protection device of 10KV, IK7 LED (SEOUL) 6500K and connecting electrical to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50 mm 3 core including GI pipe 32mm light grade 0.9 Mtr long bent to L shape in 02 Nos of GI Clamps of size 25x6 mm of length 25mm with nuts, bolts and washers complete complete all as specified and directed.

Supply and Fix PVC Conduit pipe Heavy Grade of size 20 mm with all accessories like (Bend/Tee/Junction box) complete all as specified and directed.

Taking down existing Ceiling fan/Exhaust fan capacity/type carefully and refixing the same complete all as specified and directed.

Supply & fix Water Heater storage type, five star rated, electric operated, 25 Ltr capacity 230Volt AC Supply with PVC Connection pipe Superior quality (HOT & Cold water ) including Plug top 15 Amp, NRV complete with necessary water connection and electrical connection complete all as specified and directed.

Supply and fixing ceiliing fans complete with blades, down rod , electronic regulator switch type 5 step and accessories 230V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

M&L for earthing complete with GI steel earth plate electrod 60x60cmx6.00mm thick bouried directly in ground /earth pit not less than 2.25m deep below the ground level with top edge of the plate not less than 1.5 m below the normal ground level connected to test point by using GI wire of dia 4 mm as earthing lead soldering/revated to earth plate at one end and connected DB by means of nut, bolts etc complete with PCC pit (1:3:6) type GI cover with handle funnel with watering pipe wire mess GI protection pipe for earthing lead all complete as specified and as per electric plate No.5 of SSR Part I

S & F LED bulb 12 Watt White(6000K-6500 K)/Warm(2700K-3200K) with BEE Energy star rating of three star or more and emission of minimum 100 lm/W complete all as specified

M & L for sub main wiring with four single core PVC insulated and unsheathed cable 10 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of suitable size complete with all accessories alongwith provn of 2 run of 10 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire.

Supply and fix MCB DB, TPN 6 way double door Vertical type suitable for mounting of MCCB as incomer with suitable 200 amps rated bus all as specified and directed.

Supply and fix MCCB 100 Amps 4 pole 415 Volt,25 KA breaking capacity .

Supply and fix DB,double door, SPN 8 way for MCB, 240 volt with 200 amps rated bus bar.

Supply and Fixed single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of cap 20A complete all as specified and directed.

S& F in replacement LED tube set (fitting) 20 W use and through type with internal surge protection device of 4 KV with voltage band 140-280V with LED rod with fixture box type and making electrical connection to ceiling rose all as directed.

S& F in replacement LED tube set (fitting) 20 W use and through type with internal surge protection device of 4 KV with voltage band 140-280V with LED rod with fixture box type and making electrical connection to ceiling rose all as directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

M& L for XPLE UG Cable of size 50 Sqmm 4 Core all as specified and directed.

Excavation in trenches in soft/lose soil not exceeding 1.5 Mtr wide and not exc 1.5M depth for laying of UG cables and getting out all as specified and directed.

Returning, filling, including spreading, levelling, watering and well ramming in layers not exc 25cms thick of soil complete all as specified and directed.

M & L river sand in trenches as cable cushioning 8 cm below the cables and 15cm above the cable which is to be punned down to 10 cm all as specified and directed.only punned thickness will be measured.

Removing the surplus excavated materisl/soil to a distance not exc 50Mtrs and depositing, where directed at a level not exceeding 1.5 Mtr above the starting point all as specified and directed.

Supply and lay burnt bricks sub class 'B' standard size laid across the cable in trenches as protection to the cable all as specified and directed.

M/S Kuldip Construction Co. (BID ID -3348970)