PROVN OF IRON GATE FOR OR LINE (P-65) AT 352 (I) SUP PL ASC AND PROVN OF OTM ACCN FOR OTHER RANK TRAINEES OF AAD CENTRE INCLUDING SPECIAL REPAIR TO RD FROM MAURYA CIRCLE TO 707 TSU OFFICE AND SPECIAL REPAIR TO ROAD FROM KONARK CIRCLE TO AD FIRING RAN

Amount

Dismantling of floor, hearth, walls, roof tiles including bedding (but not backing), and rubbish off permises complete all as specified and directed.

M&L for 16 mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for Rendering 10 mm thick in cement mortar 1 : 4 for fixing of wall tiles complete all as specified and directed.

M&L for Fe 410-W (Gde E-250 quality A) Framed work as in doors or gates of angle or other section with gusset plates,rails,braces etc complete,drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening anf fixing complete all as specified and directed.

M&L Mild steel, plain, 1.25 mm thick sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of any description, over 10 cm in width or girth, not otherwise described & apply two coat of synthetic enamel (ordinary tint) over & including one coat of red oxide, zinc chrome primer complete all as specified & as directed.

M&L for Cutting holes in brick walls exc half brick but not exc one brick built in cement mortor or cement lime mortor and stone walls built in lime mortor for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

TREES :- Clearance of area, digging of pits of size 0.6.m X 0.60m X 0.60m, removal of debris, weeds, roots etc, refilling with good agriculture soil and cattle manure in ratio 3:1, supply and planting of approved saplings. Sapling should be healthy grow of Ashoka Tress (4' to 6' height above ground level and girth of stem at 2' height not less than 40 mm complete all as specified and directed.

All as per item No 8 above, but Bottle Palm (6' to 8' height above ground level and girth of stem at 1' height should not be less than 150mm)

All as per item No 8 above, but Gulmohar (4' to 6' height above ground level and girth of stem at 1' height should not be less than 150mm.

All as per item No 8 above, but Neath (4' to 6' height above ground level and girth of stem at 1' height should not be less than 50mm.

SHRUBS :- Clearance of area, digging of pit of size 0.45M x 0.45Mx0.45M, removal of debris, weeds, roots etc and refilling with good agriculture soil and well decomposed cattle manure in 3:1 ratio. Supply and planting of approved species of plant healthy grow up with root system of Ficus Pands (The height of plants shall not be less than 2')

All as per item No 12 above, but Ficus Round green

GARDEN COVER PLANT :- Clearance of area, digging of pit of size 0.45M X 0.45M X 0.45M, removal of debris, weeds, roots etc and refilling with good agriculture soil and well decomposed cattle manjure in ration. Supply and planting of approved species of plant of health row up with good roots to Rose (The height of paints shall not be less than 2')

All as per item No 14 above, but Mongra

All as per item No 14 above, but Red Hot

All as per item No 14 above, but Dudodnti

LAWN :- Digging upto 0.30M depth.removal of weeds, debris (if any), roots etc, refilling with mixture of good soil and well decomposed manure in 3:1 Provision of anti termite treatment @ 5 litre of emulsion per sqm using LINDANE/CHLOROPHYRIFOS (20-EC) at plantation time and planting of BERMUDA GRASS.

HEDGE :-Clearance of area, digging of tree trenches 0.60M wide & 0.45M deep, removal of debris (if any) and refilling with good agriculture soil and cattle manure in ratio 3:1 and planting the approved quality plants for making dense hedge. The height of plants shall not be less than 15CM. Total 10 Nos plants shall be planted in 1.00 RM length in two rows all as directed & specified to from dense hedge with NRV plants/Duranla or any other approved plants as directed by GE.

M&L continuous brick (sub class 'B') edging laid on end at the required angle and laid dry, tamping ground around bricks including necessary excavation and removal of surplus soils complete all as specified and directed.

TREE GUARDS :- S&F Tree guards 1.20 meter high of mesh portion made of hard drawn fabric weld mesh of 3mm dia and 100mm x 100mm mesh size with three Nos circular FI 30 x3mm at top, bottom and middle of 45 Qm dia and 300mm long 03 Nos L shaped legs of FI 30x3mm including fixing in PCC 1:3:6 type C-2 blocks of size 15x15cm and painting with two coat of synthetic enamnel paint over a coat of red oxide primer to tree guard complete all as specified and directed.

S&F 40mm bore GI madium grade pipe laid in trenches/under floors including all fitting and fixtures complete all as specified and directed.

S&F 15mm bore GI medium grade pipe laid in trenches or fixed to walls including all fittings and fixtures complete all as specified and directed.

S&F 40mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F submersible pump of 2.00 HP to be lowered in borewells complete all as specified and directed.

S&F brass water sprinkler for lawn effective for 5.00M radius suitable for 15mm bore of pipe with stand complete all as specified and directed.

Excavation in trenches not exc 1.50m wide and n.exc 1.5m depth for foundation etc or for shafts wells, cesspits, manholes pier holes pipes etc n.exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Removing surplus excavated materials (Soil) to a distance not exceeding 50 meter & depositing where directed at level not exceeding 1.5 metre above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, waterring and well ramming in lavers not exc 25cm complete all as specified and directed.

M&L for brick work with sub class 'B' bricks built in cement mortar (1:6) using old size bricks straight or curved on plan complete all as specified and directed.

M&L for 15mm thick cement plaster in cement mortar (1:4) for manhole, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered or unpiastered surface of wall and applying two coats of cement based paint over a coat of chalk whiting complete all as specified and directed.

M&L for preparation of new or untreated surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for repair to potholes any depth, not exc 1 Sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal)

Scarifying or picking gravelled, macadam or bituminous macadam surfaces not exc. 50mm deep area not exceeding 400 sqm including removing the material from MD area the same work complete all as specified and as directed.

Preparing existing blacktop surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat with bituminous primer at 5 kg per 10 sq metres of paving bitumen (VG 30) complete all as specified and directed.

M&L for premix bituminous macadam with 4% binder paving bitumen (VG 10) content by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) and rolled with power roller 8 to 10 ton all complete all as specified and directed.

M&L for laying and spreading of bituminous pemixed asphaltic semi dense concrete 40 mm cnsolidated thickness with 5.5% binder content by weight of total mix rolled and compacted to required camber and gradient complete using paving bitumen (VG 30) any penetration. ( The SDAC laid with mechanical paver and rolled with 8-10 tonne tandom power roller)

M&L for preparation of new/old surface of road and applying 1.0mm thick and 100 mm wide reflective resign thermoplastic paint by hot application of approved colour/make complete all as specified and directed

S&F of colour reflective pavement marker (cat eye) with micro prismatic lens in both direction having thermoplastic body with flex resistant base & abrasion resistant creamer coating fixing of road surface with special adhesive and Suitable rivet head nail complete all as specified and directed

S&F Sparkle solar road studs size 125 mm x 125 mm x 90 mm ht with detachable battry 6 LEDs three on each side, ultra bright LED in red/yellow colours completely water resistant and weather proof, using of adhesive and fixing procedure as per manufacturer supervision of their competent technician etc complete all as specified and directed.

S&F "Sparkle road side delineators with tri colour reflector and 150mm wide reflectro radium sticker pasted over painted MS pipes approx 100mm dia and 100 cm long fixed in cement concrete bedding 150mmx150mmx300mm, 1:3:6 type C-1 (using 20 mm graded aggregate incl necessary earth work complete all as specified and directed.

Preparing existing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat with bituminous primer at 10 kg per 10 sq metres of paving bitumen (VG 30) complete all as specified and directed.

M/S. KISHAN ENGINEERING

M/s Ats Electricals

M/s MAA BHAIRABI ENTERPRISES

M/S SIWALIK AND CO

DHABALESWAR ENGINEERING WORKS

HARAGOURI SUPPLIERS

M/S JAGANNATH SASMAL