SUPPLY MS PIPE AND ACCESSORIES FOR CONSTRUCTION OF NEW WATER TRANSMISSION ARRANGEMENT

Galv. M.S. Flanged pipe 150 mm dia (4.8 mm)

MS Hexagonal Head Bolts & Nuts conforming to IS- 1363 ( Part-1) / 1992 of product Grade - C with latest amendments for bolt and IS1363(Part-3)/1992 of product Grade - C with latest amendments for nuts properties/class for bolt-4.6 and for nut-4.5.both bolt & nuts are to be duly ISI certification marked. i) M20 X80mm

ii) M20 X100mm

iii) M16X65mm

iv) M16X80mm

Supply & Transport of Rubber Inserction 5 mm thick with proper reinforcement 2 Ply confirming to IS 638/79 with latest ammendments 150 mm Dia.

Supply & Transport of Rubber Inserction 5 mm thick with proper reinforcement 2 Ply confirming to IS 638/79 with latest ammendments 200 mm Dia.

150 mm Nominal Size (PD) ISI marked Sluice Valve Pressure designation P.N. 1.6 with hand conforming to IS: 14846/2000 with Ammendment No-1&2 Components / Parts of Sluice Valves shall be manufactured from basic materials given in Table 1 of IS: 14846/2000 with Ammendment 1&2. The valves shall be tested for (Closed end test) against Hydrostatic test requirement.

Quadruped Set (For HDTW) (full set)

Foundation Bolt for Distribution Chamber (Quadruped & Tripod sets) manufactured from 20mm nominal diameter MS Rod as per IS-2062/1992.Total length of the the Bolt is 375 +/- 10mm having welded head 80+/- 10mm in length & 20mm in nominal diameter with nut & 20nos washer (As per Annexure-E) .The average weight of such Bolts to be 1.1 Kg per Bolt @+/- 10%.

Supply of Compressed Asbestos Fibre jointing made from 5mm thick red jointing shet as per IS2712/1998 Grade W/FYSAXAM] 321 Gasket for raised surface of MS Flange as per IS 6392/71 500 dia.

C.I.. Alfa Alfa valve (nipple type) as per drawing with hand wheel, one wheel for four nos of valve. 150mm Nominal size (Type-C).

Submersible pump sets, lSI marked as per IS8035 for pump and IS: 9283 for motor (Read with latest amendent for all IS), a) [18O-125m3/hr, 20-35mJ(25 HP) 150mm outlet. (350 mm)

MOTOR CONTROLLER, IS 60947. i) 25 HP 3ᶲ electromagnetic Star- Delta motor controllers with 4 pole heavy duty power contractor, single phasing preventer and normal protective featurrs, MCB, Indicators, push buttons, Ammeter & Voltmeter, all in IP54 enclosure of min 16 swg. C R sheet steel, 10 tank process powder coat printed and as per technical specification.

3C Flat water proof CU.cables lSI marked-IS 694. 3C X 6.0 sq mm

Galv. M S Column pipe, ISI mar ed -1239, Galv- IS4736. a) 150 mm dia one end screwed & other end non-std flange 3 mt long (bottom).

b) 150 mm dia both end with non-std flange 3 m long (middle)

c) 150 mm dia one end std& other end non std flange (top) 3m long

90 degree M.I Bend (both end flanged) 150 mm dia.

GI. Holding Clamp- IS 1239, Galv- IS 4736, a) 150 mm dia.

Galv. MS Flanged Pipe 151 marked - IS: 1239, Galv- IS4736 150mm.dia (4.8mm)

Switch Fuse Unit, lSI marked, IS 6094 100A Switch Fuse Unit TPN

Supply of MS. Hexagonal Head Bolts & Nuts bearing IS 1365 (part-I)/1992 of product Grade-C with latest ammendments for Bolts & IS 1363 (part-III) / 1992 of product Grade-C with latest ammendments for nuts properties for class bolt 4.6 & nut- 4.5 Both Bolt & Nuts