Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.4 Cr
EMD Value
₹3.4 L
Closing Date
7 Nov 2025, 8:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Rajkumar Biradar
Work of Restoration of collapsed tower no.6 at the middle of HDMC garbage dump yard of existing 220kV SRS Hubballi - Narendra DC line and Heightening of line between Tower no.5 to 7 to maintain the safe ground clearance at HDMC garbage dump yard in Hubballi Taluk ,Dharwad district
KPTCL/2025-26/TL/WORK_INDENT2782
KPTCL/2025-26/TL/WORK_INDENT2782
Open
Transmission Line
Two Tender Document System(Two Cover)
KPTCL CGM Tech Corporate Office Bengaluru
4 documents required · 4 mandatory
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Documentary proof for clause no. 3.2 (b) (i) of ITT, such as P.O, LOI, LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive or Divisional Engineer of Lead bidder
Audited financial statements including Balance sheets, Profit and Loss statements, Turnover Certificate, Auditors Reports of the last five years preceding the date of bid submission of the Bidder & Consortium partner (In case of Consortium)
Bank Guarantee / Insurance Surety Bond towards Bid security (EMD) shall be furnished and uploaded in accordance with CL No 13 of ITT
Self-declarations of Lead Bidder & Consortium partner (in case of Consortium) in respect of Litigation, dis-qualification/Black listed due to non-performance & Risk & cost clause and Restriction Country which shares a land border with India as specified in Annexure XVI & Annexure XVII as per Clause No.2.4 of ITT
Documentary proof for Clause No: 3.6 of ITT: Assessed available tender capacity such as, Maximum value of works executed (KPTCL & Non-KPTCL) in any one year during the last five years taking into account the completed as well as works in progress and Statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent as sought in Note of the said clause in the prescribed format as in clause No: 1.5 of Qualification Information of the Bidder
Details of Works on hand and Ongoing contractual commitments of the Bidder
Bankers Certificate of the Bidder for assessing the Liquid Assets (Letter of Credit/ Certificate from banks meeting fund requirement) to assess Lines of Credit and availability of other Financial resources
Type test reports as per tender documents / technical specifications
Copies of original documents defining the Constitution or legal status, Place of Registration(upload copy) and Principal place of business of the Bidder, written Power of Attorney of all persons signing subject tender documents (as per Annexure X1 of Section-4) along with copy of Resolution passed by Board of Directors/ all the Partners of the Firm
Valid Super grade Electrical Contractors License issued by the Government of Karnataka as per clause no.2.3 of ITT of both Lead bidder
Certificate of Incorporation of the Individual any relevant document in respect of Proprietorship firms as per the tender document.
The bidder should have valid GST registration with GSTIN number, PAN Card and ISO Certificates. Note: The successful Bidder who have GST registration in other States should have GST registration in the State of Karnataka mandatorily at the time of execution of the Contract Agreement
Letter of Undertaking for Bid validity as per Annexure-V of Section-4
The Qualification and experience of proposed Key Personnel for carrying out the Work
Description of the Tools & Plant available with them for execution of the Work.
An undertaking to source the supply of equipment/material from Vendors who meet the eligibility clauses regarding restriction on procurement from a country which shares land border with India as specified in Annexure-XVII as per Clause No. 3.9.7 of ITT above
All self -declarations, legally enforceable deeds & Undertakings as per terms and conditions of the tender
All details as called for in the Technical specifications of all the equipments/ materials of the Tender
Any other required documents as per the qualifying requirements, terms and conditions of the tender, NIT & Technical specifications
Proposed methodology and program of construction as per clause No.1.13 of Section-3-Qualification Information.
Filled in Techno commercial sheet shall be uploaded along with all other QR documents. Price Offers shall be quoted in the item-wise bid Financial offer, provisioned in the e-procurement portal. In case the Prices are uploaded in/along the Techno commercial Bid, then Bid will be summarily rejected. The Techno-commercial sheets shall be uploaded in KPTCL excel formats only
Information on litigations in which the Tenderer is involved as per prescribed format as at 1.12 of Qualification Information
The Tenderer shall upload declarations for Deviations, if any as per Schedule-5 and Schedule-6 of the Techno Commercial sheets.The Tenderer shall upload declarations for Deviations, if any as per Schedule-5 and Schedule-6 of the Techno Commercial sheets.
₹5,000
₹3.4 L
30 Sept 2025
30 Sept 2025
10 Nov 2025
30 Sept 2025
30 Sept 2025
Supply of Hight Tensile Tower
MS portion of Towers
Supply of Galvanised Bolts & Nuts
Tower Accessories Tower Accessories : Phase plate (Set of 6 No.)
Earth bond 450 mm long
Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation char...
(T.no.3A - 8 distance 1350 M
additional 10% due to heightening of line
Insulators & Hardware: Antifog Disc Insulator 120kN
Double Tension clamp with Arcing Horns
Single Tension clamp with Arcing Horns
Accessories for DRAKE ACSR conductor: i) Mid Span Compression joint
ii) Repair sleeves
iii) Vibration dampers.
iv) C type Wedge connector (Drake to Drake)
Vibration dampers for 48 fibre OPGW
Tension Assembly -Double Tension pass through for 48 fibre OPGW
Towers: a) Assembling and erection of towers including tightening of bolts and nuts including loading, unloading at store and site (Including the weight of stubs)
b) Sorting of tower parts made of fabricted angle iron
c) Setting of stub templates and aligning, dismantling and transportation of templates from one location to the other location for 220 kV
Welding of bolts and nuts
Phase plate (Set of 6 No.)
Supplying and fixing GI angle 45 x 45 x 5 mm 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5 mts length each at inner and outer surface of tower to facilitate running of ...
Supplying and fixing Barbed wire
Grounding of tower with GI Pipe including the cost of GI pipe
Stringing of DRAKE ACSR without allowing the conductor to touch the ground and without damaging the conductor:- Laying , stringing, tensioning ,clamping, jointing etc. of all 3 phases of HTLS conducto...
Stringing of OPGW
Dismantling of 220kV DC A+0 type Towers
(Old L&T Design)
Releasing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor:- Paving out conductor from anchor to anchor normally spaced at 5 spans with 4 tangent...
Releasing of OPGW Cable:
(T.no.3A - 8 distance 1350 M)
Loading, and Unloading :
Tower weight=8.4MT
Conductor weight=9.218MT
Single Suspension clamp with hardwares = 36*5=180Kg
90kN porcelain disc insulator=504*7=3.528MT
suspension assembly of opgw=10*3=30...
Transportation using 10T lorry :
Up- Down Distance Approx 20 Kms from work spot to TL&SS Store
To transport 21.356MT material using 10 MT Lorry will take 3 trips. Hence total Kms = 3*20kM =60kM
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Reinforced cement concrete M20 for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Work of Restoration of collapsed tower no.6 at the middle of HDMC garbage dump yard of existing 220kV SRS Hubballi - Narendra DC line and Heightening of line between Tower no.5 to 7 to maintain the safe ground clearance at HDMC garbage dump yard in Hubballi Taluk ,Dharwad district
Supply of Hight Tensile Tower
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Towers: a) Assembling and erection of towers including tightening of bolts and nuts including loading, unloading at store and site (Including the weight of stubs)
MS portion of Towers
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
b) Sorting of tower parts made of fabricted angle iron
Supply of Galvanised Bolts & Nuts
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Tower Accessories Tower Accessories : Phase plate (Set of 6 No.)
c) Setting of stub templates and aligning, dismantling and transportation of templates from one location to the other location for 220 kV
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Welding of bolts and nuts
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Phase plate (Set of 6 No.)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Earth bond 450 mm long
Providing and laying in position Reinforced cement concrete M20 for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine...
Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation char...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Supplying and fixing GI angle 45 x 45 x 5 mm 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5 mts length each at inner and outer surface of tower to facilitate running of ...
(T.no.3A - 8 distance 1350 M
additional 10% due to heightening of line
Supplying and fixing Barbed wire
Insulators & Hardware: Antifog Disc Insulator 120kN
Grounding of tower with GI Pipe including the cost of GI pipe
Double Tension clamp with Arcing Horns
Stringing of DRAKE ACSR without allowing the conductor to touch the ground and without damaging the conductor:- Laying , stringing, tensioning ,clamping, jointing etc. of all 3 phases of HTLS conducto...
Single Tension clamp with Arcing Horns
Stringing of OPGW
Accessories for DRAKE ACSR conductor: i) Mid Span Compression joint
Dismantling of 220kV DC A+0 type Towers
(Old L&T Design)
ii) Repair sleeves
Releasing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor:- Paving out conductor from anchor to anchor normally spaced at 5 spans with 4 tangent...
iii) Vibration dampers.
iv) C type Wedge connector (Drake to Drake)
Releasing of OPGW Cable:
(T.no.3A - 8 distance 1350 M)
Vibration dampers for 48 fibre OPGW
Loading, and Unloading :
Tower weight=8.4MT
Conductor weight=9.218MT
Single Suspension clamp with hardwares = 36*5=180Kg
90kN porcelain disc insulator=504*7=3.528MT
suspension assembly of opgw=10*3=30...
Tension Assembly -Double Tension pass through for 48 fibre OPGW
Transportation using 10T lorry :
Up- Down Distance Approx 20 Kms from work spot to TL&SS Store
To transport 21.356MT material using 10 MT Lorry will take 3 trips. Hence total Kms = 3*20kM =60kM
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Advisory Note to Bidders.pdf
Tender Submission Guidelines • 1.02 MB
Circulars and Guidelines.zip
Tender Submission Guidelines • 4.56 MB
220kV Hubballi-Narendra BD.docx
Tender Document • 0.39 MB
Technical Specification for Hubli-Narendra.zip
Technical Information / Worksheet • 0.53 MB
calander event WI2782.pdf
Others - Revision of Dates • 0.07 MB
Techno Commercial Sheet WI2782.xlsx
Techno-Commercial Worksheet • 0.64 MB
NIT WI2782.pdf
Others - Notice Inviting Tender • 0.89 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .