SPECIAL REPAIR OF BLDG NO 4 OF 27 AND 28 KAR BN NCC IN HUBLI UNDER GE BELGAUM.

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit completer. all as specified and as directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm and removing rubbish off the premises and old unserviceable timber battens of any description and taken as credit complete. all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work and removing rubbish off the premises and old unserviceable timber scantlings of any description taken as credit complete. all as specified and as directed.

Material and labour for 2nd class hard wood timber scantling clean sawn and fixed complete all as specified and as directed.

Description all as per item no :4 here in before but except timber

Grubbing up tree trunk of girth exc 100cm and n exc 150cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site complete all as specified and as directed.

Demolition of cement concrete of any description and in any position , unreinforced including removal of rubbish off the premises completeall as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing)and removal of rubbish off the premises complete all as specified and as directed.

Demolition of brick /Stone masonry work built in cement mortarand removal of rubbish off the premises complete all as specified and as directed.

Demolition of precast concrete articles and precast concrete block walling work built in cement mortarand removal of rubbish off the premises complete all as specified and as directed..

Material and labour for Preparing surfaces of wood ,new or old of any description and girth and treated with two coat of creosote oil complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45 mm thick(TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in roof covering completec all as specified and as directed.Note:Make of Galvalume sheet:Tata Blue scope Ltd/Jindal (Colouron)/Llyod

Supply and fix Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.45mm thick (TFT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge,Valley gutter fixed with self tapping screws and washers completec all as specified and as directed..Note:Make of Galvalume sheet:Tata Blue scope Ltd/Jindal (Colouron)/Llyod

Supply and fix Rolled mild steel roof trusses trussed purlins, rafters, struts (beam, tee, angle channel or flat sections ) including distance pieces, cleats etc. conforming to grade Fe 410-W ( Gde E - 250 ) quality 'A' complete all as specified and as directed

Supply and fix Mild Steel work as in wind ties for roof including securing bolts and cutting tops to shape etc. conforming to Fe-290 Gde E-165 complete all as specified and as directed

Material and labour for 3mm thick Aluminium composite panel comprising of a core containing not less than 70% non combustible mineral filling sandwiched between two skins of 0.5mm thick alluminium alloy PERALUMAN-100 (AIMG1-NS41) complete with all necessary sub-structures, anchors,hardware and fittings to provide a total installation, fixed to existing wooden / steel members all as per manufacturers instructions complete all as specified and as directed. Note: (i)Measurement shall be taken flat as fixed without any allowance for laps, etc.(ii) Make of Aluminium Composit Panel: Alstrong/ Aludecor/ Alucobond/ Euroband

Dismantling wall or ceiling boards or insulation boards/ slab any thickness fixed with nails including cover fillets and taken as credit complete all as specified and as directed .

Material and labour for High pressure steam cured (HPSC) non asbestos fibre cement building board with white/coloured and decorative surface finish 4mm thick in false ceiling fixed with aluminum anodized snap grid of 60x60cm in ceiling with Tee section 35x25x1.25mm, L angle section25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling board complete all as specified and as directed . Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Dismantling wrought iron or mild steel work any description and taken as credit complete all as specified and as directed.

Supply and fix Mild framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing conforming to Fe-290 Gde- E-165, complete all as specified and as directed.

Supply and fix 1mm thick Mild steel, plain, black sheet in wall cladding, steel doors/gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed..

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed .

Material and labour for Machine cut kota stone slab for skirting 20-25mm thick over cement backing coat of 10mm hick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as sp ecified and as directed.

Material and labour for 40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring including necessary steel form work complete all as specified and as directed.

Material and labour for Coloured chequered cement concrete tile of size 30cmx30cmx25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floor over and including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed .

Material and labour for Premium quality Non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match with the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. Note : Make of Ceramic tile :Johnson/Kajaria/Somany

Material and labour for Premium quality Coloured Glazed ceramic tiles of size 350x250x 7 mm/ 450x 350x7 mm thick in vertical surface viz: skirting and dado etc set and jointed in neat cement slurry and pointed in white or coloured in skirting/dado laid over and including rendering 10 mm thick in CM 1:4 on brick masonry walls as in backing coat of skirting, dado etccomplete all as specified and as directed . Note : Make of Glazed Ceramic tile :Johnson/Kajaria/Somany

Material and labour for 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in flooring including necessary steel form work complete all as specified and as directed.

Material and labour for Hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfaces complete all as specified and as directed.

Material and labour for Providing cement concrete 1:3:6 type C1 (Using 20mm graded aggregate in coping/bed plates etc including necessary steel form work complete all as specified and as directed

Material and labour for 75 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring including necessary steel form work complete all as specified and as directed.

Material and labour for Providing PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection 75 mm thick finished even and smooth without using extra cement including necessary steel form work complete all as specified and as directed.

Material and labour for Reinforced cement concrete (nominal mix) Type B1, (using 20 mm graded stone aggregate) as in lintel Beams, cantilevers,bressummers, lintels over 1.5m span etc complete all as specified and as directed.

Material and labour for Use of steel Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels complete, slab etc complete all as specified and as directed.

Supply and fix Mild steel TMT bar 10mm dia and over, cut to length bent to shape reqd incl cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Description all as item no:36 here in before but 5 to 10 mm dia as in stirrups / spacer etc complete all as specified and as directed..

Material and labour for Precast cement concrete block masonry with solid blocks type C1 1:3:6 ( using 20mm graded stone aggregate), exc 10 cm in width in set in cement mortar CM 1:6 complete all as specified and as directed.

Material and labour for Brick work with subclass B old size bricks straight or curved on plan exeeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed

Material and labour for Walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in 1:6 cement mortar complete all as specified and as directed

Hacking for key, raking out joints of old brick work or stone work built in cement mortar and scrubbing down with water etc. complete all as specified and directed.

Material and labour for Keyed pointing to block in course or squared rubble,coursed or uncoursed or concrete block walling in (1:3) CM, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls built in cement mortar including raking out joints ,hacking for key ,scrubbing down with water etc complete all as specified and as directed.

Material and labour for Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer with alkali resistant priming paint over a preparatory coat of 1 mm thick wall care putty on wall complete all as specified and as directed

Material and labour for Complete removal of existing treatment on wall with wire brushing ,scrapping down smoke soot ,mould, moss and efflorescent salts, trading oil and greasy spots and applying two coats of oil bound distemperover a coat of primer with alkali resistant priming paint over a preparatory coat of 1 mm thick wall care putty on wall complete all as specified and as directed

Material and labour for Rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on other than fair faces of brick work or stone masonry surfaces finished even and smooth without using extra cement, including taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Material and labour fo Applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on old walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc, complete all as specified and as directed.

Material and labour for Preparation of old plastered or un plastered surfaces of wall and applying two coats of white/colour wash complete all as specified and as directed.

Supply only Integral waterproofing compound,Note:Make :Impermo/Cico/Roff

Taking down pipe of 25 mm bore of any description and taken as credit complete all as specified and as directed.

Taking down pipe of 20 mm bore of any description and taken as credit complete all as specified and as directed.

Taking down pipe of 15 mm bore of any description and taken as credit complete all as specified and as directed.

Supply and fix Unplasticised PVC (UPVC) pipe 25mm bore of pressure rating 10 Kgf/cm2 with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix Unplasticised PVC (UPVC) pipe 20mm bore of pressure rating 10 Kgf/cm2 with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix Unplasticised PVC (UPVC) pipe 15mm bore of pressure rating 10 Kgf/cm2 with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix in repair Vitreous china water closet, Pedestal type, white, including PVC flush pipe, seat cover etc and connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipe etc. complete all as specified and as directed.Note:Make: ESSCO by JAQUAR/CERA

Supply and fix in repair Vitreous china urinal, half stall type, white including urinal spreader of PTMT any colour for fixing with 15 mm dia pipe and PVC waste pipe and providing and fixing plugs ,bedding urinal against wall in cement mortar 1:2 ,securing urinal to plugs with and including 60 mm long brass screws ,pointing around urinal back in cement complete all as specified and as directed.

Supply and fix PVC trap S/P/Q of size 125/110 mm complete all as specified and directed.Note:Make :Finolex/Supreme/Prince (ISI MARKED)

Material and labour for PVC flushing cistern low level white 10 litre capacity with inlet ball valve float and handle including brackets, PVC flush pipe 32mm dia for low level cistern etc. complete all as specified and as directed.

Supply and fix in repair for Bib tap 15 mm dia cast copper alloy, chromium plated, screwed down high pressure for iron pipe of any type complete all as specified and as directed.Note:Make :Seico/Prayag/ESS ESS

Supply and fix in repair 15 mm bore stop valve cast copper alloy, chromium plated, fancy type screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and as directed. Note:Make :Seico/Prayag/ESS ESS

Supply and fix Vitreous china wash hand basin white flat back of size 550x400mm including waste coupling of PTMT 32 mm bore dia (Minimum weight:45 gms) , PVC waste pipe, PVC connection 600mm long including cutting for and pinning in ends of CI brackets or erecting stands etc complete all as specified and as directed..

Supply and fix in repair 15 mm bore Pillar tap, cast copper alloy, with capstan heads, chromium plated, fency type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed. Note:Make :Seico/Prayag/ESS ESS

Supply and fix Soap dish, vitreous China white, of size 160x 160x90mm complete all as specified and directed.

Supply and fix PVC connections of15 mm dia with PTMT nut of 450mm long complete all as specified and directed.

Material and labour for PVC (SWR) nahani/floor trap plain with grating of 75mm dia outlet including jointing with solvent cement complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix PVC squre or round shape grating of 150mmSize (Make: Prayag) Minimum weight :100 gms complete all as specified and as directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) of area exc 1.5 sq. m but n exc 4 sq. m each including builders hardware items and making wall edges good in shape complete all as specified and as directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) of area not exc 1.5 sq. m each including builders hardware items and making wall edges good in shape complete all as specified and as directed.

Taking down shutters of any description of area exc 2 sq. m each and taken as credit complete all as specified and as directed.

Taking down shutters of any description of area exc 1.0 sqm and not exc 2 sq. m each and taken as credit complete all as specified and as directed.

Taking down and refixing shutters of any description of area exc 1.0 sqm and not exc 2 sq. m each complete all as specified and as directed.

Supply and fix Factory made Steel window with side hung shutters including projecting type hinges with steel handlewith locking arrangements, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified directed.

Supply and fix Rolled mild steel frame work such as grills, gratings etc. With ends of bar shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed labusters, walk ways, railings, framewok of water tanks and similar work con-forming to FE 290. Gde-E-165, complete all as specified and directed.

Supply and fix Factory made 35 mm thick second class hard wood, Plain framed, panelled shutter with lock rail and panel of 12mm thick veneered particle board ,medium density with commercial face veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Supply and fix Second class hard wood plain solid straight chowkat or frame rebated on the solid, wrought, framed rounded or chamfered put together with glue pinned at joints fixed in position complete all as specified and as directed.

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specification and drawing. complete all as specified and as directed.

Ssupply and fix 30mm thick Factory made solid PVC moulded door shutter as per IS-4020 made from MS tube for top and bottom rails,.MS frame shall be covered with heat maulded plain colour PVC "c" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,lock rail and bottom rail on either side and as gap insert for top and bottom rail. Panelling of plain colour PVC sheet to be fitted in MS frame welded /sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings complete all as specified and as directed.

Material and labour for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed..

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed. Note : Make of Glass : saint gobain/Modi guard/Gold fish

Supply and fix Stainless steel steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed in panel with stainless steel wire staples complete all as specified and as directed .

Supply and fix MS butt hinges cold rolled medium weight 100mm size complete all as specified and as directed..(ISI MARKED)

Supply and fix 150mm long extruded section aluminium alloy anodised handles fabricated typecomplete all as specified and as directed. Make :Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed Make :Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix Aluminium alloy anodised sliding door bolt 300mm long with hasp and staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and as directed. Note : Make of Aluminium anodised sliding door bolt : Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and as directed. Make :Classic/Crown/Adarsh . .(ISI MARKED)

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. and taken as credit complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Note :Make of PVC(SWR) Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Note :Make of PVC(SWR) Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110mm bore PVC (SWR) bend any radius with access door complete all as specified and as directed. Note :Make of PVC(SWR) Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75mm bore PVC (SWR) bend any radius with access door complete all as specified and as directed. Note :Make of PVC (SWR) Bend :Finolex/Supreme/Prince (ISI MARKED)

Material and labour for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in surface channels and drain etc including necessary steel form work complete all as specified and diected.

Extra for forming fair finished drain or channels 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc., complete all as specified and as diected.

Supply and fix PVC (SWR) pipe of 160 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floorscomplete all as specified and as directed. Note :Make of PVC(SWR) Pipe :Finolex/Supreme/Prince (ISI MARKED)

Material and labour for Precast cement concrete in perforated slab Type B1, 1:2:4 using 20 mm graded stone aggregate set in 1:4 cement mortar including necessary steel form work/moulds complete all as specified and as directed.

Taking down carefully Aluminum/copper point wiring complete for light, fan, 5 A socket, 15/6 Amps socket, 2 way points and bell point etc in any type of wiring with boards, holders and any type of electrical fittings etc complete and making good to disturbed area and taken as credit complete all as specified and as directed.

Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 6.00 Sq mm drawn through and including PVC conduit of suitable size with all necessary fittings fixed in wall/ceiling and Provn of one run of 6.00 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly including dismantling of old unserviceable submain wiring with aluminium conductor cable of any size and taken as credit complete all as specified and as directed. NOTE:(i) Two runs of 6.00sqmm and one run of 6.00 sqmm and one run of PVC conduit will be measured as one unit. (ii) Make of PVC cable :Polycab/Havells/KEI (iii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

Material and labour for Point wiring 1.5 Sqmm single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cables drawn through and including PVC conduit/casing capping of suitable size with all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular PVC surface box fixing on wall with and including white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way complete all as specified and as directed.NOTE. (i) Make of PVC cable :Polycab/Havells/KEI (ii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Description all as per item No. 102 here in before but for one fan point controlled by one switch and regulator.

Description all as per item No. 102 here in before but forone bell push button on same board controlled by one switch

Description all as per item No. 102 here in before but for one 05/6 Amps socket outlet on independent board.

Description all as per item No. 102 here in before but for one 05/6 Amps socket outlet on the same board with other switches.

Description all as per item No 102 here in before but complete with 1100volt grade FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core and one run of FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core of upto earth dolly for 15 Amps socket outlet independent .

Supply and fix Modular switch piano type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix Modular bell push flush type 230V AC 6 Amps,complete all as specified and as directed.Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix Modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma) /Legrand/Crab Tree

Supply and fix in repairs Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix in repairs Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix in repairs Modular electronic type fan regulator 230 V , 120 watt step type, 2 module complete all as specified and as directed . Make : Anchor/Legrand/Rider

Supply and fix in repairs PVC /Poly carbonate Ceiling rose surface bakelite of size 63.5 x 20 mm, three terminals complete all as specified and as directed . Make : Anchor/ Cona / Havells

Supply and fix call bell, ding dong,230V AC supply complete all as specified and as directed. Make : Anchor/ Cona / Rider

Supply and fix in repairs LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core FRLS PVC flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed Make Havells Cat No : LUMILINEPLUSNEOBS20WLED830SPCSSIND or equivalent price and specification t in Crompton Greaves/Wipro

Supply and fix in repair LED luminaire of size 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up to driver with FRLS PVC three core flexible copper conductor cable of suitable size complete all as specified and as directed. Note : Make :Havells Cat part no : VENUSNEO2X2PLR36WLED857G2 OR equivalent in Wipro/CG

Supply and fix in repairs Decorative post top latern with LED lamp 25 watts including connecting up to driver with FRLS PVC three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make: Havells Model Ruby clear OR equivalent in Wipro/CG

Supply and fix Integral LED 35 watts security light fitting comprising of pressure die cast aluminium housing with high power LEDs & electronic driver including GI pipe medium grade and bracket of suitable size fixed to pole /wallcomplete all as specified and as directed. Make: Havells ENDURA Pearlr OR equivalent in Wipro/CG

Supply and fix Ceiling fan complete with blades, down rods of suitable length of 20 mm dia medium grade GI pipe from top to bottom, and accessories, 230 V, 1200 mm sweep, Minimum air delivery 210 CFM with service value 6.00 BEE 5 star rated with brush direct current motor (BLDC) including taking down existing unserviceable ceiling fan from the location and setting aside for fixing /deposting to MES store yard complete all as specifed and as directed . Note : Make:-Bajaj /Crompton/Orient

Supply and fix Exhaust fan, steel body AC single Phase. 230V of size 250m sweep with, blades, and frame and louvers ,heavy duty , copper winding with necessary grouting and fixing arrangements and provision of 3 core flexible FRLS PVC copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and as directed. Note : Make:-Bajaj/Crompton/Orient

Material and labour for 50mm bore GI tube, medium grade as in supports for hanging ceiling fan of 1200/ 1400mm sweep, cut to required length, grouted into wall and making good distured surfaces as required complete all as specified and as directed.Note :Make of GI Pipe:TATA/JINDAL/PRAKASH SURYA

Supply and fix in repairs Single pole and neutral enclosure,powder coated, with a two pin earth plug and socket complete, 20 Amps, 240V,including provision of one single pole MCB 20 Amps 'C' curve type and taking down existing unserviceable SPN enclosures of any description and taken as credit complete all as specified and as directed.Note :Make :L&T/Indo Asian/Legrand

Supply and fix Sheet metal enclosure type TP&N Vertical Loadline DBs fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB) 12 Way with double door type and including provision of 2nd class hard wood board with sunmica top of suitable size fixed to wall and fixing of the MCB DB on board complete all as specified and as directed..Note :Make :L&T/Indo Asian/Legrand

Supply and fix in replacement MCCB,TP,125 Amps , 10 KA , C Series current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and as directed..Note :Make :Indo Asian/L&T/Siemen

Supply and fix Sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar double door type and including 2nd class hard wooden board 4cm depth with sunmica top of suitable size to fix the MCB DB, complete all as specified and as directed. .Note :Make :Indo Asian/L&T/Siemen

Supply and fix MCB DP 63 A 10KA C series 50HZ AC supply incl dismantling old unserviceable MCB DP of any description and taken as credit , complete all as specified and as directed. .Note :Make :Indo Asian/L&T/Siemen

Supply and fix MCB SP 240 Volt of capacity 5 to 40 Amps‘C’ series, complete all as specified and as directed. .Note :Make :Indo Asian/L&T/Siemen

Supply, lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of Cross sectional area 35 Sqmm, 4.0 core laid in trenches or fixed to wall / passing through pipe / pole compete all as specified and as directed. Note : (i) Excavation & earth work, Brick protection and sand cushining shall be measured and paid for separately under relevent items in this BOQ (ii) Make of XLPE Cable : Gloster/Polycab/KEI

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m depth in any type of soil up to top of drain pipe,laying of cable etc complete all as specified and as directed.

Material and labour for Double wall corrugated HDPE pipes of ISI marked 63 mm outer dia and 50 mm inner dia as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc complete. all as specified and directed.Note :Make : Rex/ Ketron/Duraline

Returning, filling in including spreading levelling and well ramming in layers n exc 25cm thick with soil obtained from excavation from any type of soil complete. all as specified and directed

Removing of excavated material/surplus soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point for any type of soils complete. all as specified and directed

Supply and fix Galvanised iron water tube 'light grade' of size 40 mm bore with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed.Note:Make of GI Pipe :TATA/JINDAL/ZENITH (ISI MARKED)

Material and labour for Earthing complete with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground in vertical position, earth pit not less than 2.25 Metre deep below ground level with top edge of the plate not less than 1.5 Metre below ground level connetced with galvanised iron earth lead wire of size 4 mm dia(Upto 7.50 metre length) by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary excavation & earth work, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 3 of MES Schedule Part-I complete to obtain less than 1 Ohm earth resistance, fiaxed in repairs complete all as specified and as directed.

Sadhana Constructions & suppliers

SMLP ASPHALTS