Construction of control room building with electrification, sanitary arrangements, Borewell and water supply arrangements in the proposed C.G.Pudur 33/11 KV SS.

Amount

Clearing scrub jungles and disposing from the site as per the direction of site engineer including cost of all labour, lead, lift etc., complete

Earth work excavation for foundation in hard stiff clay, stiff black cotton hard red earth, shales, muram, gravel, stoney earth and earth mixed with small size boulders with an initial lead, lift, etc, complete.

Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 2m in Soft Disintegrated rock, laterite, soft rock or kankar, not requiring blasting.

Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 2m in medium rock and dense medium rock not requiring blasting.

Removing hard rock by wedging , chiselling and trimming to proper shape where blasting is prohitibed.

Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m alround the buildingusing termite 250ml for 5lit of water etc. complete.

Supplying and filling of M.sand in foundation and basement with water and consolidation as per specn.including cost of all materials labour, lead, lift, etc., complete.

PCC 1:3:6 mix using 40mm HBS machine crushed metal for foundation without form work including cost of all labour , materials,M.Sand, water charges , lead, lift, curing, etc., complete.

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for raft foundation without formwork including cost of all materials,M.Sand, water charges, labour lead, lift, etc., complete, but excluding cost of steel reinforcement.

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for column concrete with formwork including cost of all materials, M.Sand, water charges labour lead, lift, etc., complete. But excluding cost of steel reinforcement (by using mixer machine).

RCC. 1:1 1/2:3 mix using 12 mm to 20mm HBS metal(machine crushed) for Grade beam /plinth beam with formwork including cost of all labour, materials, M.Sand, water charges, lead, lift, etc, complete. But excluding cost of steel reinforcement (by using mixer machine).

RCC 1:1 1/2:3 mix using 12 to 20mm HBS metal (machine crushed) for continuous lintel with formwork including cost of all materials, M.Sand, water charges ,lead, lift, etc., complete. But excluding cost of steel reinforcement (by using mixer machine).

RCC 1:1 1/2:3 mix using 12 to 20mm HBS metal (machine crushed) for Sun shade 60cm. Projection 80 mm thick at wall end and 50 mm thick at free end and loft, with form work including cost of all materials, M.Sand, water charges , labour, leas, lift, etc., complete. But excluding cost of steel reinforcement (by using mixer machine).

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, M.Sand, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof Beam concrete.

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, M.Sand, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof slab concrete 130mm Tk.

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, M.Sand, form work, centering, curing, all labour charges, water charges , lead, lift, etc. complete. But excluding cost of steel reinforcement. For precast cover slab concrete.

Brickwork in CM 1:5 mix using bricks of size 9"x 4 3/8"x2"3/4" for Ground Floor super structure including cost of all materials, M.Sand, water charges , labour, lead, lift, curing, etc., complete by using II class Chamber Burnt bricks.

Brickwork in CM 1:5 mix using bricks of size 9"x 4 3/8"x2"3/4" for First Floor super structure including cost of all materials, M.Sand, water charges , labour, lead, lift, curing, etc., complete by using II class Chamber Burnt bricks.

Brickwork in CM 1:3 mix using II class chamber brick of size 9"x 4 3/8" x 2 3/4" for bath, FOL, brick on edge, partition wall, superstructure including cost of labour, all materials, M.Sand, curing, lead,water charges, lift, etc., complete.

Fabrication, Transport & fixing of GI angles for cable duct with anchorage and placing in position as directed by the engineer at site including cost of angles,cutting and all labour, lead, lift, etc. Complete

Refilling with excavated earth other than sand in foundation and sides of masonry, consolidation as per std.specn.with water including all, labour, lead , lift, etc., complete.

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Providing projected border of 7.50cm width on top of parapet wall in CM 1:3 mix 12mm thick including cost of all materials, M.Sand, labour charges,water charges, lead, lift, curing etc., complete.

Providing projected border of 20cm. width for plinth beam in CM. 1:3 20mm thick including cost of all materials, M.Sand, labour, lead, water charges, lift, etc., complete.

Plastering with CM.1:5 mix using 12mm thick for inside & outside walls, including cost of all materials, P.Sand, water charges, labour, lead, litf, etc, complete.

Plastering with CM. 1:3 mix 12mm thick for ceiling, FOL, bath, RCC pillars, sunshade, loft, etc., including cost of materials, M.Sand, labour, water charges, lead, lift, watering, curing, etc., complete.

Finishing the floor with 20mm thick cement concrete using 3 to 10mm stone chippings (Ellis pattern first sort -no sand to be used) including cost of all materials, M.Sand, labour, lead, lift etc. complete.

Providing weathering course with good quality of readymade cooling tiles (230x230x20mm) laying over cm 1:3, 12mm and pointed with the same mortor mixed with water proofing compound used over a bed of brick jelly, lime concrete of 80mm thick with ratio of 32:12.5 cft (no sand) with the required slope and beaten with wooden beaters including cost of, cement all materials, curing, labour, lead and lift etc., complete.

Providing PVC down fall pipe using 110mm dia 4 Kg / sqcm, PVC pipe and pvc clamp line supreme etc, including fixing PVC washer type door bend & shoe, in correct position and connecting from the roof slab including cost of all materials, labour, transport lead, lift, etc., complete, including PVC accessories and washers.

Providing and fixing sanitary fitting consisting of Neycer/parryware of oriya patten Water Closet 45cm with P/S trap connecting with PVC ventilating shaft and Y bend complete, including cost of all material, labour, lead, lift, etc, complete.

White washing two coats of white cement over the plastered surface including removal of all loosly adhering materials from the wall surface with the help of emery stone,putty blade or wire brush and making the surface in just wet condition as per the specification and approved by the site engineer including cost of all materials, labour, transport, lead etc complete.

Colour washing two coats with approved quality of oil bound distember over one coat of white washing, for ceiling surfaces including cleaning the plastered surface, cost of all materials, labour, lead, lift, T&P, etc. complete

colour washing two coats with approved quality of Cement paint over one coat of white cement primer for outside walls including cost of all materials , labour lead and lift etc complete.

Supplying and fixing of two side polished 20/30mm tk.cuddapah slab for cupboard, including cost of all materials, labour, lead, lift, etc., complete

Providing shoring and shuttering in foundation using wooden planks and scantling including cost of all materials, lead,lifts, labour, etc , complete.

Dewatering charges per hour including hire charges for 3/5 HP Diesal motor with Pump

Collection, supplying, stacking and spreading of red gravel well compacted including cost of all materials lead lift labour etc complete as per the direction of site engineer.

Providing inspection chamber of sufficient intervels throughout the line 0.45x0.45m. Size to a depth as below with proper gradient of the sewerline and BW. in CM 1:5 with CI. cover at top and bottom foundation PCC 1:3:6 using 40mm metal plastering with CM1:3 12mm thick and all lead, water charges ,lift etc.complete. 0.45x0.45m size to a depth of 0.45m

Supplying and fixing CI.man hole cover of size 0.45x0.45m for inlet and outlet manhole and building outside man hole cover of heavy duty including cost of all materials lead, lifts, labour etc., complete

Supplying and laying PVC pipe 110 mm outer dia 6kg/ cm2 ISI make for laying the sewer line including cost of pvc pipe coupling labour for cutting laying fixing tighting etc including earth work excavation and refilling trench etc complete

Supplying and fixing of 110mm dia slotted pvc pipe for dispersion trench and covering with roof pantiles for covering the sides partly as per the direction of the Engineerin charge including cost of all materials lead, lift etc. Complete.

Supplying and filling 20mm HBS metal for dispersion trench per standard specification including cost of all materials, lead lift etc. complete.

Supplying and fixing of 110mm dia PVC pipe, cowl for ventilating shaft, to a height of 10' length with proper B.W. with C.M.1:5mix plastering 12mm thick including cost of all materials, lead, lift etc. Complete.

Flooring with approved double charges vitrified tiles 600x600x8mm size of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, M.Sand, water charges ,labour, lead, lift, etc. complete [Excluding battery room]

Flooring with approved Design Johnson or equivalent make non slippery ceramic tiles (300x300mm) tiles over cement mortar 1:3,20mm thick including pointing with white cement finishing the joints, flush pointing the surface etc., complete. ( Bath & FOL Room Only)

Dadooding walls with approved quality of glazed tiles, size and design (johnson or equivalent make) laid in cement mortar 1:2 -10mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the jointsand pointing flush with the surface , including cost of all materials, M.Sand, water charges labour, lead, lift, etc. complete.

Flooring with approved acid proof tiles over cement mortor 1:3 20mm thick in floor including pointing with white cement finishing the joints flush pointing the surface etc including cost of all materials, M.Sand,water charges labour, lead, lift, etc. complete.(Battery Room )

UPVC Door Providing UPVC Door and fixing casement doors fabricated from unplasticized polyvinyl chloride (UPVC) sections .The Profile should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm.The window unit should be designed with all corner joint mitred and fusion welded. windows should be steel reinforced with 25x24x25mm steel reinforced with a thickness of 1mm to have dimensional stability. The sash should be of 60x102mm. The mullion should be of 60x74mm.The profile should have coextruded seals. Hardware : All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing : The window system should be glazed with 5mm plain float glass/6mm bison lam Installation : The profiles should be cut to length and welded 45 degrees .The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws Into plug.

UPVC Window Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

UPVC Ventilator Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supply and fixing of solid PVC door with frame made out of rigid thermo vinyl polymer extruded section ofsize 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigid thermo vinyl polymer extruded sectionof size 25mmx40mm with 2mm wall thickness is mitered and joinedat corners by stainless steel/ aluminium screws. The infill of the door shutterconsists of a seamless one piece multichamber hollow rigid thermo vinyl polymer sectionof size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials lead lift etc., complete.

Supply and fixing of wash basin of size 560x410mm coloured colour and of approved quality and make[Parryware or equivalent] with 12/15mm dia brass CP pillar tap [waterman], 32mm PVC waste pipe [Kohinoor], 12/15mm CP angle cock [ISI], 15mm brass nipple, 15mm nylon connection [Kohinoor] etc. fixing the basine in the wall with GI/Alu. brackets, giving necessary water connection etc., soap tray, towel rod and mirror with beveled edge fixed with suitable CP brass screws etc., complete.

Supplying and fixing in position sun control polyester flim, reflective type 75 microns thick, gareware or equivalent including the cost of all materials, labour, lead, lift, T&P etc. Complete.

Supplying and fixing of 1000 lit capacity sintex tank of approved quality including cost of materials labour for fixing lead lifts etc., complete

Supplying and fixing of Urinal Basin of size 18” with all fittings in-let and outlet pipe wheel value 12mm dia. size, including cost of all materials, leads, lifts, labour for fixing,etc; complete.

Supplying and laying of 32mm dia PVC pipe to withstand the pressure of ISI make including cost of pvc pipe coupling labour for cutting laying fixing, tighting etc including earth work excavation and refilling trench etc complete for earth pit water supply arrangements

Supplying and laying of 25mm dia PVC pipe to withstand the pressure of ISI make including cost of pvc pipe coupling labour for cutting laying fixing, tighting etc including earth work excavation and refilling trench etc complete for earth pit water supply arrangements

Supplying and laying of 20mm dia PVC pipe to withstand the pressure of ISI make including cost of pvc pipe coupling labour for cutting laying fixing, tighting etc including earth work excavation and refilling trench etc complete for earth pit water supply arrangements

Supplying and fixing inposition of 32mm dia GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete.

Supplying and fixing inposition of 25 mm dia GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete.

Supplying and fixing inposition of 20mm dia GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete.

Providing PVC door bend 50mm dia including fixing in position cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing 100 x 50mm PVC floor trap in bath room with one pvc door bend shoe of 50mm.dia including cost of all etc., complete

Supplying and fixing 110mm dia PVC Bend including cost of materials, labour lead lift, etc. Complete

Supplying and fixing 110mm dia Pvc TEE including cost of materials, labour lead lift, etc. Complete

Wiring with 2x1.5 sq.mm PVC insulated single core unsheathed copper conductor cable 1100 v grade in suitable PVC rigd pipe on wall and ceiling with reputed make switch boxes earthwire connection in 14 SWG TC wire for light point / Fan point including cost of wire ,labour lead etc. complete.of approved quality (For Electronic regulator)

Supply and run of 2 x 1.5 sqmm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.

wiring with 2 x 4 sqmm (56x0.3) PVC insulated single core unsheathed copper cable 1100 v grade in suitable PVC rigd pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150x100x63 mm TW Swich box with 3mm thick hylem sheet for 15 A 3 PIN non interlocking CS plug with continuous earth wire 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work etc. Complete with PWD earthing

Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only.

Supply and fixing of 20W LED 3000K flu.type fitting complete on wall/ceiling with tubes and PVC unsheathed Copper leads from terminal to the fitting.

Supply and fixing of 4'28 W Twin type Mirror optic suspension type fitting (Philips /Crompton / Wipro) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with flu. tubes.

Supply and fixing of W.T bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for 11W LED bulb with guard

Supply and fixing of 1400 mm (56") AC ceiling fan complete with stepped electronic 300 W regulator with 1.0m down rod including fan clamp with side plates and cross arm of size 450 mm.

Supply and fixing of 450 mm (18") sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC plug) [Legrand (MDS) / Hager (L&T) make].

Supply and fixing of Horizontal type 4 way pole neutral MCB distribution board in sheet steel enclosure with40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with ISI mark)

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work.

Supplying and laying of 4 core 6 Sqmm copper PVC armoured LTUG cable including cost of cable, lead, lift, labour charge, etc., complete

Supplying and fixing of 4 pole 32 Amps Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at relay and CC room, cost of all materials, lead, lift, labour charge, etc., complete.

Supplying and fixing the chequered plate for 8mm thick in the control room including cost of all materials, labour charges leads, lifts etc., complete.

Drilling of 150 mm dia borewell from GL in all classification of soils including hard rocks using Power RIG/Hamer RIG, charges for transporting the power Rig to site , operation charges all lead, lifts , labour, etc, complete.

Supplying and fixing 160 mm dia PVC casing pipe of superior quality of 6 Kg / Sqcm with sheel thickness of 8mm, including fixing and transporting to the site and cost of Pvc casing pipe, labour, lead, lifts, etc, complete..

Supplying and fixing 110 mm dia PVC slotted pipe of superior quality of 6 Kg / Sqcm with sheel thickness of 8mm, including fixing and transporting to the site and cost of Pvc slotted pipe, labour, lead, lifts, cost of pebbles and backing of pebbles as per instruction of site engineer etc, complete..

Supplying and fixing of 50 mm dia outer HDPE Hose fine tee, flow tee of ISI make with connecting sepcieals for suction including cost of all materials ,labour, lead, lifts, etc, complete.

Supplying and fixing of 25 mm dia outer HDPE Hose fine tee, flow tee of ISI make with all connecting sepcieals for air pipe including cost of all materials, labour, lead, lifts, etc, complete.

Supplying and fixing and erection of 50 mm dia GI pipe 'B' Class in suction and delivery pipe from the Bore including cost of pipe coupling,bend, labour for cutting , threading & fixing wherever necessary.

Provision of conducting Geological survey for bore well by the Government agencies. including transport,labour etc complete

S&F of 3 phase 3HP Submersiable pump with accessories of approved make of Texmo or ELG Iincluding cost of all materials,labour transport,lead,lift etc with mounting platform & foot valve arrangement and 3 phase 15 amphs L& T starter arragements etc complete

Supply of Steel S Type chair with nylon seated of 'TANSI' or any other ISI mark

Supply of Steel side rack open type of 'TANSI' or any other ISI mark

Supply of Steel half bench of 'TANSI' or any other ISI mark

Supply of steel stool of 'TANSI' or any other ISI mark

Supply of TW SC table of 'TANSI' or any other ISI mark

Supply of PVC armed Chair of reputed make of 'TANSI' or any other ISI mark

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

DHARIENEESH HOUSING DEVELOPERS

sai pranesh infrastructures

JK ENGINEERS