Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹1.5 L
Closing Date
24 Feb 2025, 9:30 pmClosed
Public Works Department
Executive Engineer
08022255210
Renovation of Revenue Department (Secretariat Office) at 3rd stage, west wing, 5th Floor, M.S. Building, Bengaluru.
PWD/2024-25/BD/WORK_INDENT18657
PWD/2024-25/BD/WORK_INDENT18657
Open
Buildings
Two Tender Document System(Two Cover)
PWD No.1 Buildings Division Office Bengaluru
4 documents required · 4 mandatory
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 to 2023-24 b)Satisfactory completion as prime contractor in similar construction works to an extent of 50% of the cost of the work i.e. Rs 38.16 Lakhs
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 to 2023-24 (c)executed in any one year, the following minimum Supply of work:1)Providing and fixing wall paneling 284 Sqm. 2) Providing & Fixing of Mineral Fibre Suspended Ceiling System 322 Sqm 3) Providing and laying Vitrified/Ceramic/glazed Tiles and skirting 353.00 Sqm 4) Providing fabricating and fixing wooden partition frame work 46 Sqm.5)Supplying and providing chairs/Tables/Mobile pedestal unit 36 Nos. 6)Providing fabricating & fixing UPVC sliding windows 44 Sqm.
3.3 Each Tenderer should further demonstrate: (b)Liquid assets and /or availability of credit facilities of not less than: Rs.22.90 Lakhs (Credit lines/ letter of credit/ certificates from nationalized/Scheduled banks) for meeting the fund requirement etc.
3.6.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx2.5- B) Where A is Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited 3 month. B is Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the next 3 month. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 to 2023-24 a)Achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs.76.33 lakhs
nil
nil
nil
nil
nil
nil
nil
nil
nil
nil
₹1,910
₹1.5 L
14 Feb 2025
14 Feb 2025
25 Feb 2025
18 Feb 2025
Renovation of Revenue Department (Secretariat Office) at 3rd stage, west wing, 5th Floor, M.S. Building, Bengaluru.
Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking to the appropriate disposal area as per direction of Engineer-in-charge. thickness ...
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposal ...
Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to ...
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.
Dubbing out on old irregular walls average 10mm thick and making good the surface with cement mortar 1:3 including curing cost of materials, labour, complete as per specifications.
Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...
Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-i...
Dismantling doors, windows and clerestory windows (steel or wood) shut- ter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of E...
Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle gr...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...
Providing & Fixing of Mineral Fibre Suspended Ceiling System in the module size of 600x600x19mm with Exposed grid for Hospitals, Shopping malls, Commercial establishments and of...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...
Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all co...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
Providing and fixing Pillar cock with high neck with 265mm Extended body made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium
Providing and fixing 600x450 mm beveled edge mirror of superior Glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete. Semi rigid pipe : 40 mm dia
Providing and fixing Double Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings...
Providing and fixing 12 mm thick frameless toughened Glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic ...
Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory pressed bwp g...
Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand bo xes,shelves,racks,almirah,cupboard and drawer etc. in...
Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with sS screws etc. complete as per direction of Engineer-in- charge. 200mm length
Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with sS screws etc. complete as per direction of Engineer-in- charge. 150 mm length
Providing and fixing Stainless Steel 304 grade soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws inclu...
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 200x10mm
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS hinges 100 mm
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Door stopper 75mm
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
Providing and fixing aluminium die cast body tubular type universal hy- draulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700...
Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work
polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...
Fabricating and fixing single leaf single wing approved 30mm thick flush door finished with approved 4m thick veneer on both sides finished with melamine polish, complete. Including cost and conveyanc...
Providing fabricating and fixing wooden partition frame work consisting of 50mm X50mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the bottom and wall surface, the partition shall b...
Providing and fixing wall paneling over sal wood frame work using 12mm thick one side white colour and another side colored pre-laminated Novopan or Bhutan or equivalent sheet is cut to the required s...
Roller Blinds - Providing and fixing roller blinds for windows and ventilatorsincluding providing neccessary powder coated channel roller arrangement rollerblinds etc. complete (ADR No.559/2021-22 Dat...
Supplying and fixing Jaguar make Rimless wall hung china clay water closet (Code No.81953-VGS) with heavy duty double flapped seat cover etc., complete. The rate inclusive of all materials, labour for...
Supplying and fixing Jaguar make Health Faucet with 1.00m flexible aluminium coated tube and hook including necessary screws, accessories etc. complete. The rate including necessary threads, white lea...
S.C.I. gully or nahani grating 100 mm dia (Sl No 735, P No. A-32, Vol-II, PWD SR 2023-24)
Providing and Supplying of Executive Medium Back Mesh chairs with Multi lock, gas lift of optima series of featherlite/Godrej or equivalent make, including the cost of all materials, labour and transp...
Supplying and fixing High back Leatherette Chairs with knee tilt, with Gas Lift, fine tuning adjustment, Lumber support of featherlite/Godrej or equivalent make, including the cost of all material, la...
Supplying and fixing Medium back Leatherette Chairs with knee tilt, with Gas Lift, Lumber support of featherlite/Godrej or equivalent make, including the cost of all material, labour and transportatio...
Providing, Supplying and Fixing Meeting table made out of 25mm High Density Fibre Board with both side laminate of approved colour and shape with 4 sides Vertical Support with 19mm Both Side laminated...
Fabrication and fixing of Office table of size 2.0x0.75x0.75=1.125 Sqm. made out of 19mm sandwiched plywood finished all exposed surfaces by using thickapproved veneer and all edges lipped with teakwo...
Providing and Supplying of Executive Table finished with Approved Laminate with Right Side Cabinet includes 2 Drawers with Lock 1 Swivel Door with CPU Space includes Alloy Wire box with Cable Manager ...
STRAIGHT WORKSTATION (Frame) Providing and fixing STRAIGHT WORKSTATION ( Frame ) consisting of back to back unit made out of 75 mm thick MS CRCA powder coated, tile based system for main and return sp...
Wooden Mobile Pedestal Unit with Cushion:- Providing & placing position Pedestal unit of 450mm x 450mm x 600mm ht. Pedestals are made from 19mm thick prelaminated PLPB Board with matching colour edge ...
Providing and supplying Centre Table with approved Laminate finish and Powder coated steel Legs DL 19 including the cost of all material, labour and transportation lead lift etc., as per the direction...
Providing and supplying Contemporary style pinnacle executive high back chair .black colour mesh & fabrics, height adjustment with chrome steel base along with twin castor wheel gas lift made up of MD...
Supplying and providing visitors chairs with fixed arms with sledge base of featherlite, Godrej or equivalent make, including the cost of all materials, labour and transportation lead lift etc., as pe...
Providing Dewaan made of teak wood frames with teak wood legs, the size of the Dewaan is 600x1800mm with approved design. The top is covered with 19mm thick block board. The mattress of Kurl-on make c...
Providing and supplying of Cotton bed spread of size 50"x90" of approved quality and design etc., complete. The rate including cost of all materials, labour charges with all lead and lift, loading and...
Supplying of Bombay Dying woolen blankets with edge stiitching of apporved quality and design. The rate including cost of all materials, labour charges with all lead and lift, loading and unloading, t...
Providing and supplying of Pollow of size (20"x26") Restolex make complete. The rate including cost of all materials, labour charges with all lead and lift, loading and unloading, transportation and a...
Providing and supplying of Bombay Dying Pollow covers of approved quality and design etc., complete. The rate including cost of all materials, labour charges with all lead and lift, loading and unload...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
final kw3 revenue.docx
Tender Document • 1.19 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].