PROVN OF OVERHEAD PROTECTION FOR PARKING OF VEHICLES FOR OFFICERS, JCOs / ORs AND ADDN /ALTN OF COMPOUND WALL AND ALLIED WORKS IN FRONT OF BLDG NO.33 AT NCC OTA KAMPTEE UNDER GE KAMPTEE.

Amount

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplus soil to distance n.exc 50m and making good surface in soft/loose soil complete all as specified and directed .

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed .

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/loose soil complete all as specified and directed.

Removing excavated material exc 250 m but not exc 500 m and depositing where directed as in soilscomplete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Material and Labour cement concrete type D2, 1:4:8 ( 40mm graded aggregate) in foundations, filling and mass concrete/sub base complete all as specified and directed

Material and Labour for cement concrete type B2, 1:2:4 ( 40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Supply anf fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply anf fix Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply anf fix steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tube conforming to IS 1161-1979 grade St-240 complete all as specified and directed

Material and Labour for Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W Gde E-250 quality B all as specified and directed.

Supply and fix for 11 to 15 mm mild steel screws bolts (machine made) with hexagonal or square heads at one end and screws both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm not exc 10 cm long complete all as specified and directed.

Supply and fix framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plate, riveting, etc n.exc 10 kg each brackets, conforming to Fe-290. Gde E-165 .complete all as specified and directed

Preparation of newly steel surfaces of any description over 10 cm width or girth and applying two coats synthetic enamel paint over a coat of red oxide primer.complete all as specified and directed

Material and labour for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

Material and labour for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished fair and even complete all as specified and directed.

Material and labour for hardcore broken stone or boulders of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for path complete all as specified and directed.

Material and labour for for 75mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregates as in floor finished the surface even and smooth without using extra cement complete all as specified & directed.

Material and labour for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregates) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 38mm wide and 3mm thick glass dividing strips inserted in position confirmed to designed complete all as specified and directed.

Material & labour preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for cement concrete 1:2:4 type B-1(using 20mm graded aggregate) as in roof kerbs or mud stops, steps, rounded or chamfered on edges complete all as specified and directed.

Material and labour for Cement concrete 1:2:4 type B1 using 20mm graded stone aggragate as in surface channels and drains complete all as specifed and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

All as per item No. 24 above Add or deduct for each 25 mm girth or part thereof over or under 30cm complete all as specified and directed.

Material and labour for sand filling under floor or in foundation including watering and consolidation etc complete all as directed.

Material and labour for machine pressed precast conctete interlocking paver block, rubber finished any colour, shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade etc with grey cement and pigment complete all as directed.

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size conforming to is 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment finished with coloured rubber finish on top finished over sand dust cushion of 30 mm thick complete all as specified and directed . Note : Sand cushion will be measured and paid separately

Material and labour for precast RCC 1:2:4 type B1 (using 20mm graded aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, mangers, shelves, lintel over jalli and similar articles with plain faces and set in CM 1:6 . (reinforcement measured and paid sepratly) complete all as specifed and directed.

Supply and fix milt steel TMT bars 10 mm dia and over , cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

All as per item No 30 above but 6 to 8 mm dia complete all as specified and directed.

Supply and fix 300 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars, laid in trenches or in floors complete all as specifed and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 100 mm thick plain cement concrete type B1, (1:2:4) (using 20mm graded stone aggregate) as in floor/hardstanding,etc finished surface even and smooth without using extra cement, complete all as specified and directed.

Material and labour for Pre polished Chequered tiles rubber pressed glossy finish (any colour) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed.

Material and labour for for cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in benching/coping and the like including weathering slightly round or chamfered angles and throating complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed.

Supply and fix 100 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars, laid in trenches or in floors complete all as specifed and directed.

Material and labour for for Broken glass coping on top of walls in CM 1:3 complete all as specifed and directed.

Material and labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) confirming to Fe-290 e-165. complete all as specified and directed.

Material and labour for 1mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed.

Material and labour for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm with IS 9537 (Part-III) 1983 marked medium grade concealed in wall of the size 2x2.5 Sqmm with earth wire of 1x6.0 Sqmm, complete all as specified and directed. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same Make.

Supply and fixing for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed.

Supply and fixing ceiling rose, surface type, three terminals 5 amps, complete all as specified and directed.

Supplying and fixing 20 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed.

Supply and fix building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc. complete all as specified and directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting double door, complete all as specified and directed.

Supply and fix MCB single pole & neutral 240 volt 6 to 32 amps 10 KA, complete all as specified and directed.

Supply and fix MCB single pole 240 volt 6 to 32 amps 10 KA, complete all as specified and directed.

NOTE : SCHEDULE OF CREDIT (Amount on page No 36 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be considered for acceptance

Devika Constructions

M/s B S Jain

M/s M.G. Hargunani

DEESHA CONSTRUCTIONS

SHIV SHANKAR MISHRA

Rehal Construction

M/s ABHIMAN HEGDE

Bidder Name

M/s ABHIMAN HEGDE

Rehal Construction

SHIV SHANKAR MISHRA

DEESHA CONSTRUCTIONS

M/s B S Jain

Devika Constructions

M/s M.G. Hargunani

M/s T.S.JOHAR