Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹55.1 LAdmitted-Finance 280 1 ASHOK SANGHVI PLOT NO 280 G I D C UMBERGAON 22 VALSAD GUJARAT 396171 UDYAM MH 19 0003291 | VALSAD | GUJARAT | 396171 | L1 | Admitted-Finance | |
| 2 | L1₹92.7 LAdmitted-Finance A 8 A 9 FOCAL POINT JALANDHAR PUNJAB 144004 | JALANDHAR | PUNJAB | 144004 | L1 | Admitted-Finance | |
| 3 | L1₹1.2 CrAdmitted-Finance 53 KM STONE NH 19 NEAR SHREE SATYA SAI HOSPITAL VILLAGE BAGHOLA PALWAL 121102 HARYANA INDIA 53 KM STONE NH 19 NEAR SHREE SATYA SAI HOSPITAL 89289 | PALWAL | HARYANA | 121102 | L1 | Admitted-Finance | |
| 4 | L1₹1.4 CrAdmitted-Finance 17 17 WESTON STREET WESTON STREET KOLKATA WEST BENGAL 700013 | KOLKATA | WEST BENGAL | 700013 | L1 | Admitted-Finance | |
| 5 | L1₹1.7 CrAdmitted-Finance PLOT NO L 100 M I D C TALOJA INDUSTRIAL AREA TALOJA DIST RAIGAD 410208 PANVEL RAIGAD MAHARASHTRA 410208 | RAIGAD | MAHARASHTRA | 410208 | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | VAIBHAV FITTING INDIA PVT. LTD. L1 | EBY Fasteners L1 | SKY FORGE PVT LTD L1 | Tube Turn (India) Pvt. Ltd. L1 | M.S. FITTINGS MFG CO PVT LTD. L1 | CSA Fittings L1 | VIJAY CYCLE AND STEEL INDUSTRIES L1 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00GROUP-1 (GROUP WISE EVALUATION) SUPPLY OF FITTINGS BLOCK FORGED_STAINLESS STEEL FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition. | ||||||||||
| 1.01 | ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% | 148 | Nos | 51,327 ₹51,327 | 61,420 ₹61,420 | - | 45,288 ₹45,288 Lowest | - | 59,200 ₹59,200 | - |
| 1.02 | ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% | 4,232 | Nos | 20,07,238 ₹20,07,238 | 25,39,200 ₹25,39,200 | - | 17,26,656 ₹17,26,656 Lowest | - | 18,62,080 ₹18,62,080 | - |
| 1.03 | ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% | 250 | Nos | 2,86,875 ₹2,86,875 | 3,37,500 ₹3,37,500 | - | 2,42,250 ₹2,42,250 | - | 2,25,000 ₹2,25,000 Lowest | - |
| 1.04 | ELB 90 DEG SS DUAL (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% | 2 | Nos | 521 ₹521 Lowest | 630 ₹630 | - | 612 ₹612 | - | 800 ₹800 | - |
| 1.05 | ELB 90 DEG SS DUAL (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% | 11 | Nos | 5,891 ₹5,891 | 6,270 ₹6,270 | - | 4,488 ₹4,488 Lowest | - | 4,950 ₹4,950 | - |
| 1.06 | ELB 90 DEG SS DUAL (NACE), 3000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103 | 3 | Nos | 3,519 ₹3,519 | 4,050 ₹4,050 | - | 2,907 ₹2,907 | - | 2,700 ₹2,700 Lowest | - |
| 1.07 | ELB 90 DEG SS DUAL (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% | 11 | Nos | 9,706 ₹9,706 | 10,890 ₹10,890 | - | 4,488 ₹4,488 Lowest | - | 7,700 ₹7,700 | - |
| 1.08 | ELB 90 DEG SS DUAL (H2 SER.), 9000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% | 10 | Nos | 9,129 ₹9,129 | 7,500 ₹7,500 | - | 3,570 ₹3,570 Lowest | - | 7,000 ₹7,000 | - |
| 1.09 | ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% | 3 | Nos | 2,097 ₹2,097 | 2,160 ₹2,160 | - | 1,530 ₹1,530 Lowest | - | 1,650 ₹1,650 | - |
Tender Value
Refer Docs
Closing Date
6 May 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Mr Amit Borkar
thyssenkrupp Uhde India Private Limited Uhde House, L B S Marg, Vikhrol(W),Mumbai - 400083, India.
SUPPLY OF FITTING BLOCK FORGED _CS_ AS_SS FOR AG AND UG PIPING FOR MSB, PFCC, GDS AND FF FOR NREP
2025_NRL_855616_1
TK-1ZZZA-MP-RFQ-0171
Limited
Miscellaneous Goods
Supply
120 days
Numaligarh Refinery Limited Assam, India
As per tender details
6 documents required · 6 mandatory
₹0
Exempted
12 Nov 2025
5 Apr 2025
7 May 2025
5 Apr 2025
6 May 2025
21 Apr 2025
5 Apr 2025 - 18 Apr 2025
GROUP-1 (GROUP WISE EVALUATION) SUPPLY OF FITTINGS BLOCK FORGED_STAINLESS STEEL FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS DUAL (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS DUAL (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS DUAL (NACE), 3000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103
ELB 90 DEG SS DUAL (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS DUAL (H2 SER.), 9000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
ELB 90 DEG SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
ELB 90 DEG SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
ELB 90 DEG SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
ELB 90 DEG SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
ELB 90 DEG SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
ELB 45 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 45 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 45 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
FCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
FCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
FCPL SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
FCPL SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
FCPL SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS DUAL (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS DUAL (H2 SER.), 9000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
CROSS SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, OPPOSITE ENDS SHALL BE OF SAME SIZE
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL (NACE), 3000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103
TEE SS DUAL (H2 SER.), 9000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
TEE SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
TEE SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
HCPL SS, 3000,0, B16.11, SW END, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
HCPL SS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE SS, B36.19M, MNPT x BW END,SCH 80S, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP321H, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F321H IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE SS, B36.19M, MNPT x BW END,SCH 80S, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP321H, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F321H IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE SS, B36.19M, MNPT x PE,SCH 80S, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP321, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F321 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE SS, B36.19M, MNPT x PE,SCH 80S, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP321, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F321 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE SS, B36.19M, MNPT x PE,SCH 80S, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP321, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F321 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
GROUP-2 (GROUP WISE EVALUATION) SUPPLY OF FITTINGS BLOCK FORGED - ALLOY STEEL FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
ELB 90 DEG AS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
ELB 90 DEG AS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
ELB 90 DEG AS (IBR), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
ELB 45 DEG AS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
FCPL AS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
FCPL AS (IBR), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
RCPL AS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
TEE AS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
TEE AS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
TEE AS (IBR), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
TEE AS (IBR), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL AS (H2 SER.), 3000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
HCPL AS (H2 SER.), 3000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
HCPL AS (H2 SER.), 3000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
HCPL AS (H2 SER.), 3000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
HCPL AS (IBR), 6000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL AS (IBR), 6000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL AS (IBR), 6000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
NIPPLE AS, B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P5, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F5 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE AS, B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P5, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F5 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE AS, B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P9, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F9 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE AS, B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P9, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F9 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE AS, B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P9, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F9 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE AS (H2 SER.), B36.10M, MNPT x PE,SCH XS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P11, MAT. DELIV. COND. SCH XS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F11 CL.2 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE AS (H2 SER.), B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P11, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F11 CL.2 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE AS (H2 SER.), B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P11, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F11 CL.2 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE AS (IBR), B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P11, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F11 CL.2 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
NIPPLE AS (IBR), B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P11, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F11 CL.2 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
GROUP-3 (GROUP WISE EVALUATION) SUPPLY OF FITTINGS BLOCK FORGED -CARBON STEEL-LTCS FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
ELB 90 DEG LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG LTCS (NACE), 6000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
ELB 90 DEG LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
ELB 90 DEG LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
ELB 45 DEG LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
ELB 45 DEG LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
FCPL LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
CROSS LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, OPPOSITE ENDS SHALL BE OF SAME SIZE
TEE LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
TEE LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
HCPL LTCS, 3000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 3000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 3000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 3000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 6000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 6000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 6000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 6000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS (NACE), 9000,0, B16.11, SW END, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
HCPL LTCS (NACE), 9000,0, B16.11, SW END, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
NIPPLE LTCS (AMINE+CAUSTIC), B36.10M, MNPT x BW END,SCH XS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE LTCS (AMINE+CAUSTIC), B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE LTCS, B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE LTCS, B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE LTCS (NACE), B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, SERVICE NACE, CATEGORY 1, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
NIPPLE LTCS (NACE), B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, SERVICE NACE, CATEGORY 1, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
FCPL LTCS, 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A350 Gr.LF2 CL.1, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
FCPL LTCS (NACE), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
GROUP-4 (GROUP WISE EVALUATION) SUPPLY OF FITTINGS BLOCK FORGED -CARBON STEEL-H2 SER and NACE FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
ELB 90 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (NACE+H2), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
ELB 90 DEG CS (NACE+H2), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
ELB 45 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (NACE+H2), 6000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
ELB 45 DEG CS (NACE+H2), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
FCPL CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
CROSS CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (NACE+H2), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS (H2 SER.), B36.10M, MNPT x PE,SCH XS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS (H2 SER.), B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS (NACE), B36.10M, MNPT x BW END,SCH XXS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, SERVICE NACE, CATEGORY 1, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
NIPPLE CS (NACE), B36.10M, MNPT x BW END,SCH XXS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, SERVICE NACE, CATEGORY 1, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
GROUP-5 (GROUP WISE EVALUATION) SUPPLY OF FITTINGS BLOCK FORGED -CARBON STEEL-IBR FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
ELB 90 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
ELB 90 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
ELB 90 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
ELB 90 DEG CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
ELB 45 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
ELB 45 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
ELB 45 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
ELB 45 DEG CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
RCPL CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
RCPL CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
RCPL CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
RCPL CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
CROSS CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED., OPPOSITE ENDS SHALL BE OF SAME SIZE
TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
TEE CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
NIPPLE CS (IBR), B36.10M, MNPT x PE,SCH XS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIA, REQUIRED IF MOC IS OF PIPE ELSE, FORM IIIC FOR FORGED MOC
NIPPLE CS (IBR), B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIA, REQUIRED IF MOC IS OF PIPE ELSE, FORM IIIC FOR FORGED MOC
GROUP-6 (GROUP WISE EVALUATION) SUPPLY OF FITTINGS BLOCK FORGED -CARBON STEEL-GALV FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.)&EXT. COATED, 3000,0, B16.11, THREADED END,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
HCPL CS (GALV.)&EXT. COATED, 3000,0, B16.11, THREADED END,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
HCPL CS (GALV.)&EXT. COATED, 3000,0, B16.11, THREADED END,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
HCPL CS (GALV.)&EXT. COATED, 3000,0, B16.11, THREADED END,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
HCPL CS (GALV.)&EXT. COATED, 3000,0, B16.11, THREADED END,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
HCPL CS (GALV.), 6000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 6000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 6000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 6000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 6000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (GALV)&EXT. COAT, 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
ELB 90 DEG CS (GALV)&EXT. COAT, 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
ELB 90 DEG CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (GALV)&EXT. COAT, 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
ELB 45 DEG CS (GALV)&EXT. COAT, 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
ELB 45 DEG CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
FCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
GROUP-7 (GROUP WISE EVALUATION) SUPPLY OF FITTINGS BLOCK FORGED -CARBON STEEL-ELB,FCPL,RCPL,CROSS,TEE,HPCL,NIPPLE FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
ELB 90 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
FCPL CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
CROSS CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS (CAUSTIC), B36.10M, MNPT x BW END,SCH XXS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS (CAUSTIC), B36.10M, MNPT x BW END,SCH XXS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE ERW CS, IS 1239, MNPT x PE,SCH HVY, ERW, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE IS 1239 PART-1,HVY, MAT. DELIV. COND. SCH HVY, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE ERW CS, IS 1239, MNPT x PE,SCH HVY, ERW, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE IS 1239 PART-1,HVY, MAT. DELIV. COND. SCH HVY, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS, B36.10M, MNPT x PE,SCH XS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS, B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS, B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS, B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS, B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
Description of Work / Item(s)
Amount
GROUP-1 (GROUP WISE EVALUATION) SUPPLY OF FITTINGS BLOCK FORGED_STAINLESS STEEL FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS DUAL (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS DUAL (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS DUAL (NACE), 3000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103
ELB 90 DEG SS DUAL (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS DUAL (H2 SER.), 9000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 90 DEG SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
ELB 90 DEG SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
ELB 90 DEG SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
ELB 90 DEG SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
ELB 90 DEG SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
ELB 90 DEG SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
ELB 45 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 45 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
ELB 45 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
FCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
FCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
FCPL SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
FCPL SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
FCPL SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS DUAL (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS DUAL (H2 SER.), 9000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
RCPL SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
CROSS SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, OPPOSITE ENDS SHALL BE OF SAME SIZE
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL (NACE), 3000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103
TEE SS DUAL (H2 SER.), 9000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
TEE SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
TEE SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
TEE SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
HCPL SS, 3000,0, B16.11, SW END, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
HCPL SS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE SS, B36.19M, MNPT x BW END,SCH 80S, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP321H, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F321H IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE SS, B36.19M, MNPT x BW END,SCH 80S, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP321H, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F321H IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE SS, B36.19M, MNPT x PE,SCH 80S, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP321, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F321 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE SS, B36.19M, MNPT x PE,SCH 80S, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP321, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F321 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE SS, B36.19M, MNPT x PE,SCH 80S, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP321, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F321 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
GROUP-2 (GROUP WISE EVALUATION) SUPPLY OF FITTINGS BLOCK FORGED - ALLOY STEEL FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
ELB 90 DEG AS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
ELB 90 DEG AS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
ELB 90 DEG AS (IBR), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
ELB 45 DEG AS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
FCPL AS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
FCPL AS (IBR), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
RCPL AS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
TEE AS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
TEE AS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
TEE AS (IBR), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
TEE AS (IBR), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL AS (H2 SER.), 3000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
HCPL AS (H2 SER.), 3000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
HCPL AS (H2 SER.), 3000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
HCPL AS (H2 SER.), 3000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
HCPL AS (IBR), 6000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL AS (IBR), 6000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL AS (IBR), 6000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
NIPPLE AS, B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P5, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F5 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE AS, B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P5, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F5 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE AS, B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P9, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F9 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE AS, B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P9, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F9 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE AS, B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P9, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F9 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE AS (H2 SER.), B36.10M, MNPT x PE,SCH XS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P11, MAT. DELIV. COND. SCH XS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F11 CL.2 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE AS (H2 SER.), B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P11, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F11 CL.2 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE AS (H2 SER.), B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P11, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F11 CL.2 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
NIPPLE AS (IBR), B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P11, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F11 CL.2 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
NIPPLE AS (IBR), B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P11, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F11 CL.2 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
GROUP-3 (GROUP WISE EVALUATION) SUPPLY OF FITTINGS BLOCK FORGED -CARBON STEEL-LTCS FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
ELB 90 DEG LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG LTCS (NACE), 6000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
ELB 90 DEG LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
ELB 90 DEG LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
ELB 45 DEG LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
ELB 45 DEG LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
FCPL LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
CROSS LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, OPPOSITE ENDS SHALL BE OF SAME SIZE
TEE LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
TEE LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
HCPL LTCS, 3000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 3000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 3000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 3000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 6000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 6000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 6000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 6000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL LTCS (NACE), 9000,0, B16.11, SW END, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
HCPL LTCS (NACE), 9000,0, B16.11, SW END, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
NIPPLE LTCS (AMINE+CAUSTIC), B36.10M, MNPT x BW END,SCH XS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE LTCS (AMINE+CAUSTIC), B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE LTCS, B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE LTCS, B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE LTCS (NACE), B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, SERVICE NACE, CATEGORY 1, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
NIPPLE LTCS (NACE), B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, SERVICE NACE, CATEGORY 1, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
FCPL LTCS, 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A350 Gr.LF2 CL.1, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
FCPL LTCS (NACE), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
GROUP-4 (GROUP WISE EVALUATION) SUPPLY OF FITTINGS BLOCK FORGED -CARBON STEEL-H2 SER and NACE FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
ELB 90 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (NACE+H2), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
ELB 90 DEG CS (NACE+H2), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
ELB 45 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (NACE+H2), 6000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
ELB 45 DEG CS (NACE+H2), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
FCPL CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
CROSS CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (NACE+H2), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS (H2 SER.), B36.10M, MNPT x PE,SCH XS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS (H2 SER.), B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS (NACE), B36.10M, MNPT x BW END,SCH XXS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, SERVICE NACE, CATEGORY 1, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
NIPPLE CS (NACE), B36.10M, MNPT x BW END,SCH XXS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, SERVICE NACE, CATEGORY 1, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
GROUP-5 (GROUP WISE EVALUATION) SUPPLY OF FITTINGS BLOCK FORGED -CARBON STEEL-IBR FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
ELB 90 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
ELB 90 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
ELB 90 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
ELB 90 DEG CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
ELB 45 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
ELB 45 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
ELB 45 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
ELB 45 DEG CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
RCPL CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
RCPL CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
RCPL CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
RCPL CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
CROSS CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED., OPPOSITE ENDS SHALL BE OF SAME SIZE
TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
TEE CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
HCPL CS (IBR), 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
NIPPLE CS (IBR), B36.10M, MNPT x PE,SCH XS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIA, REQUIRED IF MOC IS OF PIPE ELSE, FORM IIIC FOR FORGED MOC
NIPPLE CS (IBR), B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIA, REQUIRED IF MOC IS OF PIPE ELSE, FORM IIIC FOR FORGED MOC
GROUP-6 (GROUP WISE EVALUATION) SUPPLY OF FITTINGS BLOCK FORGED -CARBON STEEL-GALV FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.)&EXT. COATED, 3000,0, B16.11, THREADED END,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
HCPL CS (GALV.)&EXT. COATED, 3000,0, B16.11, THREADED END,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
HCPL CS (GALV.)&EXT. COATED, 3000,0, B16.11, THREADED END,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
HCPL CS (GALV.)&EXT. COATED, 3000,0, B16.11, THREADED END,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
HCPL CS (GALV.)&EXT. COATED, 3000,0, B16.11, THREADED END,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
HCPL CS (GALV.), 6000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 6000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 6000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 6000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS (GALV.), 6000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (GALV)&EXT. COAT, 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
ELB 90 DEG CS (GALV)&EXT. COAT, 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
ELB 90 DEG CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (GALV)&EXT. COAT, 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
ELB 45 DEG CS (GALV)&EXT. COAT, 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
ELB 45 DEG CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
FCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
GROUP-7 (GROUP WISE EVALUATION) SUPPLY OF FITTINGS BLOCK FORGED -CARBON STEEL-ELB,FCPL,RCPL,CROSS,TEE,HPCL,NIPPLE FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
ELB 90 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 90 DEG CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
ELB 45 DEG CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
FCPL CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
RCPL CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
CROSS CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
CROSS CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS (CAUSTIC), B36.10M, MNPT x BW END,SCH XXS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS (CAUSTIC), B36.10M, MNPT x BW END,SCH XXS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE ERW CS, IS 1239, MNPT x PE,SCH HVY, ERW, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE IS 1239 PART-1,HVY, MAT. DELIV. COND. SCH HVY, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE ERW CS, IS 1239, MNPT x PE,SCH HVY, ERW, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE IS 1239 PART-1,HVY, MAT. DELIV. COND. SCH HVY, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS, B36.10M, MNPT x PE,SCH XS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS, B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS, B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS, B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
NIPPLE CS, B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
VIJAY CYCLE AND STEEL INDUSTRIES (BID ID -3207626)
SKY FORGE PVT LTD (BID ID -3206225)
M.S. FITTINGS MFG CO PVT LTD. (BID ID -3207521)
CSA Fittings (BID ID -3207593)
EBY Fasteners (BID ID -3205474)
Tube Turn (India) Pvt. Ltd. (BID ID -3206912)
M.S. FITTINGS MFG CO PVT LTD. (BID ID -3207521)
Tube Turn (India) Pvt. Ltd. (BID ID -3206912)
CSA Fittings (BID ID -3207593)
SKY FORGE PVT LTD (BID ID -3206225)
VIJAY CYCLE AND STEEL INDUSTRIES (BID ID -3207626)
EBY Fasteners (BID ID -3205474)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .