PROVN OF FENCING AND ALLIED SERVICES FOR 5TH BN, OVERHEAD SHED FOR 30 X MOTORCYCLE/SCOOTER STAND QM SECTION AND MINOR WORK AT NDA KHADAKWASLA

Amount

Excavation in post holes(or similar holes) each n. exc 0.5 Cu.M getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface as hard/dense soil all as specified and directed.

M&L for PCC (1:3:6) type C2 (Using 40 mm graded stonr aggregate as in foundations, filling and mass concrete complete all as directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in hard dense soil complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (Using 40 mm graded stone aggregate in foundation filling as in fencing posts complete all as directed.

M&L for Precast cement concrete block type C1 (1:3:6) (20mm graded aggregate ) masonry with solid blocks built in cement morter (1:6), exc. 10 cm in width and setting in mortar, complete all as directed.

M&L for 15 mm thick cement plaster in cement morter (1:6), onfair surfaces brick or concrete surface, surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rolled mild steel posts and struts in fencing including cutting tops to shape and split at bottom as directed, drilling holes for wires etc, including flat iron fillets for securing wire mesh etc including all drilling, rivetting, bolting etc and similar works.(Fe 410-w gde E-250 auality 'A').

S&F Bands, straps, supports , stiffners or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

M&L for mild steel round bars 10 mm dia. and cut to length and bent to shape as required including cranking etcConforming to Fe 410w (Gde E-250)quality 'A' or Fe 290 (Gde E-165)

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as directed.

Supply only Chain link MS galvanisd fencing, any size or type etc complete all as specified

S&F MS screw bolts (machine made 12 mm dia. Shank) with hexagonal or square heads at one end and screwed at another end, each screwed end to be fitted with washer and one hexagonal or square nut, n exc. 5cm length.

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel/iron surface of any description over 10 m in width or girth complete all as directed.

M&L for two coats of synrhetic enamal paint surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as directed.

M&L for two coat of cement base paint on new plastered surface of wall over a coat of primer including preparetion of plastered surface.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil.

Removing excavated material exc. 1.5Km but n exc. 5 km and depositing where directed at a level n exc. 1.50mtr above the starting point in

S&F galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M&L for RCC 1:1 ½ :3 normal mix (Using 20mm graded stone aggregate) in foundation including rafts, footing, foundation beams, plinth beams and mass concrete

M&L for RCC 1:1 ½ :3 normal mix (Using 20mm graded stone aggregate) in columns,pillar,piers,post and struts complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Use and waste of formwork to sides of pillars, posts, struts, piers, columns, and stanchions

M&L for TMT Bars 10mm dia and over cut to length bent to shape required incl cranking bending and spirally for hooping for colums hooking ends and binding with ms wire n. less than .9mm dia

S&F TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including binding with mild steel wire (annealed) not less than .9mm dia.

M&L for 18 to 20mm thick granitestone slab work ( of any type) (table rubbed 7 polished ) in floors, jambs, steps, pillars, window cills, cooking platforms and like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite complete all as directed

S&F ornamental intricate framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; frame guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F 4mm thick aluminium composit panel sheet with 0.5mm PVDF coating conforming to aluminium alloy 3003418/1100416 cut to sie and fixed with stainless steel screws on stainless steel frame /tube 1"x1.5" or as per manufacturers instructions, including filling the joints with silicon sealent of matching colour etc, size of sheet as customized at site work as required as specified and directed. Note : (a) Rate is deemed to be inclusive of scaffolding required and joint sealing (b) Makes: Alu bond, Alex Panel, Indo Bond

S&F stainless steel 3D / box type letters of figures ( block roman, Italic, Indian) of grade 304, thickness of letter 1/2" width of letter 1.5" height of letter 12", cut from solid stainless steel plate, mirror finished , fixed with stainless steel screws with approved adhesive.

M&L for mild steel rolled section (angle,tee,channel, beam, hollow sections etc) as in main and cross beams, hip,verticle hollow sections and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Gde Fe 410-W(Gde E- 250) quality A complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment - S & F - Fe 410 -W (Gde-E-250) quality-A

S&F for pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coloure having tensile strength of 550Mpa as in roof covering fixed with J-type or L-type or cranked hook bolts complete all as specified and directed

Surface Excavation not exc 30cm deep and average 15cm deep and getting out hard dense soil complete all as specified and directed

Excavation in trenches n.exc 1.5m deep & n.exc1.5m wide on plan in soft/loose soil and getting out.

M&L for rendering 15mm thick cement plaster in CM( 1:4) on block walling surface finished even and smooth without using extra cement complete all as specified and directed

Spreading,levelling,watering and well ramming the earth filling under floor not exc. 25 cm thick in layers With moorum brought from outside MD land complete all as directed.

M & L for Hardcore of broken stone or boulders of gauge exc 63mm but n exc.100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as directed

M & L for 100 mm thick plain cement concrete type D2 using 40mm graded stone aggregate (1:4:8) as in sub base or simillar works complete all as specified and directed

M & L for 50 mm thick plain cement concrete type B2 using 40mm graded stone aggregate (1:2:4) as in hard standing /path etc including spick rolling or simillar works complete all as specified and directed

M & L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound,Grade ‘A’ complete all as directed

Supply and install Hi wall split type AC units indoor/outdoor complete with cordless remote control unit and with in built air ioniser dual invertor type compressor,copper tube condensing unit with CFC free gas for better indoor air quality with minimum 5 star rating of capacity 2TR single phase including additional copper piping, cabling work, insulation between indoor unit to outdoor unit and provision of MS Brackets for resting of outdoor units (where reqd) or making resting platform of outdoor unit by brick works complete all as directed. Make of Split Ac unit : Carrier/ Voltas/Daikin/Hitachi.

S & F voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 90 V to 300 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA Make one of the following : V-Guard Model No AD5 bolt 9050/ Vinitec/Sen and Pandit/Microtek.

M&L for sub main wiring 3x4 sqmm ( phase , neutral and earth) PVC insulated (heavy duty) 1100 volts grade, FRLSH, with stranded copper conductor in & including PVC casing caping of suitable size not less than 25mm (3 run of 4 sqmm cable and one run of PVC casing caping will be measured as one unit) all as specified and directed (from distribution board to metal clad switch socket point near AC)

M&L for PVC pipe 20 mm dia heavy duty with all fittings and fixing accesssories such as coupler, lock nut, saddle, pipe hook and laid on floor (for wash out line)

S &F for single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20Amp

M & L for making holes by core cutting machine on stone/concrete / brick walls.Dia of hole not exc.50mm and thickness of wall 50cm to 70cm for entry of suction and discharge pipes of AC and making good distarbed surfaces with cement morted and finally finished with plaster of parise and painted the distrubed surfaces with existing type of paint and tint complete all as directed.

ELIEYAS TRADERS

M/S P D TUPE

Mehta and Co.

M/S Narendra Construction

Sayili Enterprises