REPAIR TO ROOF, FLOOR, PLASTER, JOINERY, STORM WATER DRAIN, COMPOUND WALL, FENCING, SEWAGE LINES IN ARNIA AND SATTOWALI AT MIRAN SAHIB UNDER GE JAMMU

Amount

Taking down shutters from the frame of any description exc 1sqm but n exc 2 sqm each leaf and removing from site complete all as specified and directed.

Taking down chowkats or frames (without taking off shutters from the frame) exe 1.50 sqm but n exe 4 sqm each and removing from site complete all as specified and directed.

Taking down chowkats or frames (without taking off shutters from the frame) n exc 1.50 sqm each and removing from site complete all as specified and directed.

S&F pressed steel frames of size 105X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete all as specified and directed.

S&F pressed steel frames of size 125X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete all as specified and directed.

M&L cement concrete (1:3:6) type C-0 (using 12.5 mm graded crushed stone aggregate) filling in, pressed steel chowkats bed block for holdfast and the like complete all as specified and directed.

S&F 35mm thick 2nd class hard wood panelled shutter plain, framed with panels of timber flat on both sides supplied and fitted to chowkats complete all as specified and directed.

S&F 35 mm thick IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and miterd beads for securing glass or gauge etc complete all as specified and directed.

Supply and fixing factory made solid panel PVC doors shutters 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement. Supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S& F solid PVC door frame of size 50mm x47mm made out of 5mm thick PVC sheet reinforced with MS square tube, in opening as per specification and drawing complete all as specified and directed.

S&F box type steel windows/Ventilator (factory made) outer frame made out ERW tube 'P' section 65X45X25 mm and shutter of ERW tube 'P' section 50mmX35mmX20mm openable (double shutter) with glazed shutter on extrernal side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 nos on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler /AC window complete all as specified and shown on drgs No CEPZTD-324/07 Sh 1/3 to 3/3 Note:- The quoted rate a shall also include (i). One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrte surface (ii) 4 nos MS steel lugs made of 20X5 mm Iron flat 200 mm long iii)10 mm Sq Bar grill/guard bar design as per drawing (iv) PCC block for embedding lugs (v) Two coat of synthetic enamel paint. (vi) Galvanized mild steel wire clothes power woven 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F in repair Galvanized mild steel wire clothes power woven 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Hacking out old broken glass panes(any thickness, size,quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in squares n exe 0.5 sqm each pane complete all as specified and directed.

Description all as per serial item No.14 above but figured glass, Pin head type complete all as specified and directed.

S&F 300 mm long aluminium anodised sliding door bolt with hasp staple(bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding door bolt of extruded section complete all as specified and directed.

S&F aluminium anodised barrel tower bolts 150 mm size, and fixed complete all as specified and directed.

S&F 150 mm aluminium handle cast type complete all as specified and directed.

S&F 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F 100mm butt hinges medium weight cold rolled and fixed mild steel hinges complete all as specified and directed.

M&L for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparing pre-primed steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F in repair Mild steel framed works such as grills, framed guard bars, and cooler stand similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated ete.) sheets in roof covering including ridge complete all as specified and directed.

Dismantling of plain or corrugated, steel / Reinforced fibre glass sheeting any gauge thickness as in roof covering complete all as specified and directed.

M&L for Asbestos cement sheeting 6mm thick ,corrugated or semi-corrugated sheets in roofs,wall etc. fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

Fixing only Asbestos cement sheeting 6mm thick ,corrugated or semi-corrugated sheets in roofs,wall etc. fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F Prepainted galvalume aluminium zinc coated GI based corrugatd steel sheeting 0.5 mm thick of any colour having tensile strengt 550 mpa as in roof covering fixed with self tapping screws including ridges complete all as specified and as directed.

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for Asbestos cement two piece adjustable plain ridge 6mm thickness to suit corrugated or semi corrugated sheets Fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre pulp/insulation ) any thickness including cover fillets including taking down all electric fittings fixed with ceiling and refixig the same in position after repalcing the ceiling) complete all as specified and as directed.

Providing & Fixing in position suspended false celling system using E Grid suspended celling Grid system of M/S Everest industries Ltd or India Gypsum. The size of Grid shall be 600X600mm with GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 4mm thick High Pressure Stream cured non primered classic/designer variant E-Board ISI Marked IS No 14862-2000. Fibre cement E Board to be placed in the gird of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the pulins of the roof with butter fly clips complete all as specified and as directed.

Taking down cement plaster of any thickness including surface finishes like tile etc racking out joints , hacking for key scrubbing down with water in cluding removal of rubbish of the premises ( Any damage to electric wiring/fittings should be make good with out any cost to govt) of any height up to 12 Mtr complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces mixing with water proofing compound as per manufacturer instruction (Water proofing compound paid for seperately)of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement of any height up to 12 Mtr complete all as specified and as directed.

Supply only integral water proofing compound all as specified and as directed.

M & L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified including taking down old plaster complete all as specified and as directed.

Preparation of newly plastered surface of any description and applying two coat of cement based paint over a coat of primer complete all as specified and as directed.

M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Preparing new plastered surfaces and applying two coat of oil bound distemper over 1 mm putty on a coat of primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L for any coloured ( Except white/cream) non skid jointless ceramic tiles 6 to7 mm thick , area of each tile exc 0.11sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and , pattern, laying etc of tiles and Shade, Colour shall be decided by GE complete all as specified and directed.

Description all as per serial item no 43 above but in vertical surfaces with 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M & L for Non skid tiles colouredexc 0.06 sqm and n.exc 0.11 sqm , 6-7mm thick of any colour pattern and 1st quality as approved by GE in floor set and jointed in grey cement slurry and pointed in white cement to match the colour of tile complete all as specified and directed.

M&L for coloured glazed ceramic tiles ( Except white/cream) glossy finish of size 450x300x 6-7 mm thick in dado’s/skirting etc (1st quality). set and jointed in neat grey cement slurry and pointed in white cement to match the colour of tiles including 10 mm thick cement plaster in CM 1:4 complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair all as spd . 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) complete all as specified and directed.

Taking up or down GI tubing 15mm bore complete all as specified and directed.

Taking up or down GI tubing 20mm bore complete all as specified and directed.

S&F 15 mm bore steel tubing, medium grade, galvanished with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F 20 mm bore steel tubing, medium grade, galvanished with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F in repair 15mm bore bib tap long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Chromium plated Jet spray suitable for pedestal pattern water closet with butterfly base and PVC connection pipe with CP brass check nut at one and suitable for 15mm bore pipe/fittings complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore angle cock, cast copper alloy CP, fency type high presure with capstan head handle, screwed both ends for iron pipe of for unions complete all as specified and directed.

S&F in repairs cast copper CP concealed stop cock screwed down high pressure capstan head with CP flange suitable for 15mm bore pipe marked with hot or cold in the head complete including dismentling of tiles/any surface finishes complete all as specified and directed.

Supply and fixing in repairs 15mm bore Pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repairs shower rose brass cromium plated with swivel joints of size 75 mm dia cast copper alloy CP, fancy type with CP neck 9" long made to shape complete all as specified and directed.

S&F in repair Drapery curtain rod of metalic 25mm dia covered with PVC coating complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and directed by Engineer-in-Charge

Dismantling water tanks exc 500 & n exc 1000 ltr complete all as specified and directed.

S&F 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge.

S&F 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs PVC lid for poly water storage tanks of capacity 500 litres including PVC hinges and PVC locking both complete all as specified and directed

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe fixed complete all as specified and directed

Supply and fixing in repairs vitreous chinaware water closet (Orissa pattern) of size 580mm x 440mm Orissa pattern with integral white with ‘P’ or ‘S’ trap front or back inlet and a pair of foot rest complete including provision of cement concrete bedding complete all as specified and directed

Supply and fixing in repairs PVC valve less syphon action type low level flushing cistern 8 - 10 liters capacity with inlet, ball valve, float valve, push button type handle flush pipe of 32mm dia complete all as specified and directed.

Supply and fixing in repairs 15mm dia PVC connection with brass check nut of length 450mm complete all as specified and directed

Supply and fixing in repairs 15mm dia PVC connection with brass check nut of length 600 mm complete all as specified and directed

Supply and fixing in repairs 32/40 mm dia bore PVC flexible pipe for wash hand basin, kitchen sink and urinal complete all as specified.complete all as specified and directed

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including spreader complete all as specified and directed

Supply and fixing in repairs Vitreous chinaware wash hand basin white, flat back of size 550x400 mm excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets and CP waste coupling complete all as specified and directed

S&F in repair towel rail 600 mm long of PTMT fixed with and including chromium plated brass screw and wooden/Plastic cleats(Minimum weight 190 Gm) complete all as specified and directed

S&F in repair shelf of PTMT with and including chromium plated brass screw and wooden cleats(Minimunm weight 300 Gm) complete all as specified and directed

S&F in repair 100 mm dia stainless steel grating with waste hole complete all as specified and directed

S&F in repair 100 mm dia stainless steel grating wihout waste holes complete all as specified and directed

S&F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20 mmdia (min weight-210 gms) complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins etc confirming to Fe 410W- Gde E - 250 quality A complete all as specified and directed

M & L Machine cut kota stone slab flooring 18-20 mm thick over 75 mm 1:4:8 PCC type D2(40 mm aggregate) and 20 mm thick cement screed bad in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete including dismantling of old stone floor and over and including 75mm thick PCC (1:4:8) (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

Demolition of brickwork/stone masonary built in cement mortar including all quoins, arches, pillars, but excluding pre-cast concrete articles complete all as specified and directed

M & L Brickwork with sub class `B` old size brick straight or curved on plan exc 6 mtr mean radius built in cement Mortar 1:6 complete all as specified and directed

M&L for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of redoxide primer complete all as specified and directed

Demolition of cement concrete (reinforced) of any description and in any position (reinforcement cut as required to faciliate demolition) not otherwise specifically provided for complete all as specified and directed.

M&L providing precast cement concrete in cover slab type B1 1:2:4 (20mm graded aggregate) set in CM 1:4 complete all as specified and directed.

M&L MS TMT bars 10 mm dia and over cut to length, bend to shape etc complete binding with and including mild steel annealed wire not less than 0.09 mm dia conforming TMT bars complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in natural ground and making good disturbed ground complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brickwork, masonary etc and making good disturbed ground complete all as specified and directed.

Dismantling fencing wiremesh any type complete all as specified and directed.

Excavation in post holes in soft/loose soil n.exc 0.5cum and getting out returning filling in and ramming earth or broken rubbles mixed with earth around in layers n.exc 25cm complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and not exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

Removing excavated soil to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers not exc 25 cm in soil complete all as specified and directed.

Demoliton/breaking of drain pipes (salt glazed ware,AC or reinforced concrete) set in cement mortar and taking out off trenches and removing the debris from the site all as spd of 150mm/200 mm dia pipe including demoilition of cement concrete haunching etc complete all as specified and directed.

M&L concrete bed to 150 mm bore pipe in D-2 (1:4:8) (using 40mm graded crushed stone aggregate) including haunching against the sides of pipe complete all as specified and directed.

S&F salt glazed stoneware drain pipes, grade ‘A’ internal dia 150 mm complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and roof and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

S & F angle iron and flat iron as in fencing posts, struts, fillets etc including cutting to shape as required, drilling holes, notching for wires, splitting ends etc conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for providing reinforced cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average, sectional area exc 100 and n exc 250 sq.cm, with or without chamfered angles and flat, splayed, round or mitred tops as directed and fixed complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexa gonal or square heads at one end 12mm dia of neck exc 5cm and n exc 10 cm long bolt with washer and nuts complete all as specified and directed.

S & F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Restraining/resecuring including making good staples, Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Supply only 3mm dia GI wire chain link fencing and line wire 75x75mm mesh size and any type of strand rails straining bolts etc including provision of binding wire complete all as specified and directed.(Note : Weight shall be decided by board)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails,straining bolts, etc.including provission of binding wire complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Mild steel round bars 10mm dia and over in reinforcement cut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as directed and specified.

M&L for Mild steel TMT bars 6 to 8mm dia cut to length bent to shape required including cranking bending hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirupps, spaces and binders cut to length bent to shape required including cranking bending hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in benching and coping etc complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&L In repair concertina coil fencing with punched tape concertina coil 450mm dia 10 mtr openable length (total length 90mtr) having 50 nos round per 6 meter length, spring core wire (2.5mm thick) of high tensile strength of 165 Kg/ sqmm with tape (0.52mm thick) and weight 43.478 gm/ mtr and fixing the same on Y shaped angle iron placed 2mtr apart and with 6 horizontal RBT (reinforced barbed tape) wire, stud tied with GI staples sand GI clips to retain horizontal, including necessary bolts complete all as specified and directed.

M & L for Continuous brick edging; with width equal to the depth of the brick, laid dry, on edge old size brick With burnt clay bricks of sub class B vertically complete all as specified and directed.

M & L for reinforced cement concrete type B-1 (1:2:4) (20mm graded aggregate) as in columns, pillars, piers, posts and strut complete all as specified and directed.

S & F Formwork to sides of pillars, posts, struts, piers, columns and stanchions for square rough finished surface of concrete complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed.

M & L for 15mm thick rendering on fair faces of brickwork or concrete surface with 1:4 cement mortar, finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L for prepartion of new plastered surface of wall & applying three coats of whitewash complete all as specified and directed.

M & L for preparation of new plastered untreated surface and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

S&F 1mm thick mild steel plain black sheet for steel gates and similar work cut to size holes punched including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up mitred angles etc as required complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe 290 Gde E-165 complete all as specified and directed.

M & L for preparation of old plastered surface of wall & applying two coats of whitewash complete all as specified and directed.

M & L for preparation of old plastered untreated surface and applying two coats of cement base paint complete all as specified and directed.

S&F galvanised mild steel wire cloth power woven 0.56mm nominal dia of and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

BALVINDER SINGH AND SONS

M/S A TO Z ENGINEERS

N S MANHAS

Bidder Name

N S MANHAS

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

BALVINDER SINGH AND SONS

M/S A TO Z ENGINEERS