Repairing of Guest House at Ithai

Amount

Demolition above G.L upto floor two level disposal of unserviceable materials with 50m lead. i) Unreinforced cement concrete upto 15 cm thickness.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block (Rubber Moulded) of M-30 grade made by block making machine with stone vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand filling the joints with coarse sand etc. all complete as per the direction of the EIC.

Dismantling sheet roofing including ridges, hips, valleys, gutters etc. stacking the serviceable material and disposal of unserviceable material within 50m lead 13.27.1 G.I. sheet roofing

Trapezoidal pre-painted profile sheet roofing of approved brand DYNA roof or equivalent with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps complete, excluding the coat of purlins & trusses. 10.59.2) Pre-painted Galvanised Iron sheet (PPGL) (i) Profile sheet 0.35mm / 2.8 kgs/ sqm.

Trapezoidal pre-painted profile sheet for Ridges, Gutter or Valley 610 mm wide of approved brand DYNA roof or equivalent fixed with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps complete, excluding the coat of purlins & trusses. 10.60.2) Pre-painted Galvanised Iron sheet (PPGL) (i) Profile sheet 0.35 mm / 2.8 kgs/ sqm

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 30mm long the perimeter of ceiling fixed on wall/partition with the help of rawl plugs at 452mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of gypsum plain 10.61.1. 12.5mm thick tapered edge gypsum plain board confirming to IS 2095-Part I.

Providing and fixing 20mm plank as eave board with 7.103.2 Tolhao/ Uchan wood.

Painting two coats (excluding priming coat) with white paint of approved quality on new steel work or wood.

Applying ready mixed priming coat pink primer of approved quality on wood work.

Providing & fixing Brass. Tower bolts (barrel type) with screws etc. complete. 7.89.1) 250x10mm

Providing and fixing wash basin with C.I. brackets, 15mm dia CP Brass single hole basin mixture of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 500x400mm with a 15mm CP Brass single hole basin mixer.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: Rectangular shape 453x357mm.

Providing and fixing CP brass bib cock of approved quality conforming to IS: 8931 25.19.1 15mm nominal bore.

Providing and fixing CP brass shower rose with 12.5mm or 19mm inlet 25.17.1 100mm dia.

Providing and fixing 600x20mm C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws (Hook type) fixed to wooden cleats with C.P. brass screws.

Providing and fixing G.I pipes complete with G.I fittings i/c cutting and refilling etc. (external work) 25.6.1 15mm diameter.

Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings jointing of pipes & fitting with solvent cement trenching refilling & testing of joints complete as per direction of EIC. 24.88.2 110 mm dia.

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S 15622, of approved make, in all colours and shade, in skirting, riser of steps over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. size of tile 300x300 mm (Single charged) Non branded

Providing and laying rectified (non-skid) glazed ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufactured) of 1st quality conforming to IS 15622 of approved make in all colours shades except white, ivory, Grey, Fume red Brown, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., completed.

Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets, 15 mm CP brass pillar taps and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 24.12.1 kitchen sink with drain. 510x1040 mm bowel depth 250 mm

providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid 10 litre low level white vitreous china flushing cistern & C.P flush bend with fittings & C.I brackets 40mm flush bend overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets cutting and making the walls and floors wherever required 25.3.1 W.C pan with ISI marked white solid plastic seat and lid

Applying ready mixed priming coat pink (Red lead primer of approved quality) on steel work.

Painting one coats with chocolate, red grey of buff paint of approved quality on old steel work or wood work.

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete 24.37.1.1 32mm dia.

Providing and fixing grating of approved quality for Nahni trap 24.29.1.1 100mm nominal diameter

Providing form work i/c centering and shuttering so as to give a rough finish strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in situ reinforced concrete and plain concrete work in 4.1.1 Foundation footing bases of columns etc. and mass concrete.

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering. (2.1.2) 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm normal size.

Neat Cement punning.

Glass 27 (c ) Glass pane plain 4mm thick

Add EPF 3.25%

Add CESS 1%

Add GST @ 18% GST

M/s RK KESHORJIT SINGH

TH RAKHESH SINGH