PERIODICAL SERVICES TO CERTAIN BUILDINGS AT 26 ED AND REPAIRS TO STORM WATER DRAIN AT GAGAN VIHAR UNDER GE (AF) MARATHAHALLI BANGALORE.

Amount

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, etc. including raking out joints, hacking for key, scrubbing down with water, etc Complete and removing the rubbish off the premises to a distance n.exc.50m Complete all as specified and directed.

Material and Labour for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement in patchy surfaces of walls Complete all as specified and as directed by Engr-in-charge.

Material and Labour for applying of 3mm thick wall care putty on New plastered surfaces of walls including preparation etc Complete all as specified and as directed.

Material and Labour for applying of 3mm thick wall care putty on New plastered surfaces of ceiling including preparation etc Complete all as specified and as directed.

Material and Labour for preparation of newly plastered surfaces of walls and applying three coats of white wash Complete all as specified and directed by Engr-in-Charge.

Material and Labour for preparation of new plastered surfaces of wall and applying Two coats of Oil bound distemper over a coat of chalk whitening including preparatory to distempering Complete all as specified and as directed.

Material and Labour for Complete removal of existing treatment in Ceiling including preparation of surfaces and applying Two coats of Oil bound distemper over a coat of chalk whitening, preparatory to distempering Complete all as specified and as directed.

Material and Labour for Complete removal of existing treatment of walls including preparation of surfaces and applying Two coats of Oil bound distemper over a coat of chalk whitening, preparatory to distempering Complete all as specified and as directed.

Material and Labour for Complete removal of existing treatment of walls including preparation of surfaces and applying Two coats of white wash Complete all as specified and as directed.

Material and Labour for preparation of Old decorated surfaces of ceilings including brooming down or steel wire brushing, scrapping down smokes soot, module, moss and efflorescence salt, oil and greasy spots etc and applying One coat of white wash Complete all as specified and as directed.

Material and Labour for preparation of Old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smokes soot, module, moss and efflorescence salt, oil and greasy spots etc and applying One coat of white wash Complete all as specified and as directed.

Material and Labour for preparation of Old decorated surfaces of ceilings including brooming down or steel wire brushing, scrapping down smoke, soot, module, moss and efflorescence salt, oil and greasy spots etc and applying One coat of Oil bound distemper Complete all as specified and as directed.

Material and Labour for preparation of Old decorated surfaces of walls including washing, rubbing down & stopping of distempered surfaces and applying One coat of oil bound distemper Complete all as specified and as directed.

Material and Labour for Complete removal of existing treatment of walls including preparation of surfaces like facias, fins roof projections and applying Two coats of cement base paint over a coat of alkali resistant wall primer etc Complete all as specified and as directed.

Material and Labour for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, module, moss and efflorescence salt, oil and greasy spots etc and applying one coat of cement base paint Complete all as specified and as directed.

Material and Labour for Old decorated surfaces of walls, pillasters, roof projections, facias, droops, Chajjas, etc including necessary preparation of surfaces by washing, rubbing down and stopping and applying Two coats of Exterior emulsion paint (APEX) etc Complete all as specified and as directed.

Material and Labour for Old decorated surfaces of walls, pillasters, roof projections, facias, droops, Chajjas, etc including necessary preparation of surfaces by washing, rubbing down and stopping and applying One coat of Exterior emulsion paint (APEX) etc Complete all as specified and as directed.

Material and Labour for preperation of old painted steel & iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint Complete all as specified and as directed.

Material and Labour for preperation of old painted steel & iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint Complete all as specified and as directed.

Material and Labour for preparation of Old wood or wooden based surfaces or previously treated surfaces, not otherwise described, over 10cm width or girth and applying One coat of synthetic enamel paint, Complete all as specified and as directed.

Material and Labour for One coat of French polishing over a coat of wood filler on wooden surfaces of any description over 10Cm width or girth including necessary preparation Complete all as specified and as directed.

Material and Labour for preperation of Old painted steel & iron surfaces of any description over 10 cm width or girth and applying One coat of aluminium paint Complete all as specified and as directed.

Material and Labour for Rewriting Letters or figures (Block, roman, Italic or Indian) n.exc 30 cm high with and including synthetic enamel paint complete all as specified and as directed by the Engr-in-charge.

Material and Labour for Writing Letters or figures (Block, roman, Italic or Indian) n.exc 30 cm high with and including synthetic enamel paint complete all as specified and as directed by the Engr-in-charge.

Demolition of Brick work or Stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings dressed stonework and precast concrete articles Complete all as specified and as directed.

Dismantling of Structural steel works inclding doors gates but excluding framed trusses etc all as specified and as directed.

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing rubbish outside MD land all as directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation etc for shafts, wells, manholes, columns, pier holes etc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in Hard / Dense soil all as specified and directed.

Material and labour Plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in surface channels for drains all as specified and directed.

Material and Labour broken stone or boulders Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface all as specified and directed.

Material and labour Plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in foundations of filling and mass concrete all as specified and directed.

Material and Labour Pre-Cast Cement Concrete block masonry with solid blocks, in PCC 1:2:4, type B1, using 20mm graded stone aggregate exc. 10 cm in width and setting in CM (1:6), complete all as specified and as directed by Engr-in-charge.

Material and Labour for 50 mm thick Plain Cement Concrete (1:2:4), type B0 (using 12.5mm graded stone aggregate) as in drains finished cement concrete surface even and smooth using extra cement complete all as specified and directed.

Material and Labour for Extra for forming fair finished drain or channel of manholes 50 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified and directed by Engr-in-charge.

Material and Labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in CM (1:4) finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Material and Labour for Plain Cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in copping complete all as specified and as directed by Engr-in-charge.

Returning, filling in including spreading, levelling watering and well ramming in layers not exceeding 25cm thick in hard / dense soil complete all as directed by Engr-in-charge.

Removing excavated soil to a distance exceeding 1.5 Km and not exceeding 5 Km and depositing where directed at level not exceeding 1.50m above the starting point complete all as directed by Engr-in-charge.

Material and Labour for Cutting opening through Stone walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective stone work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking stone, removing surplus serviceable Stone, hard-core, etc. to store and rubbish not exc. 50m Complete all as specified and as directed.

Material and Labour for Steel work in tubular trusses including special shaped washers etc. Complete using ERW or induction butt welded tubes Conforming to IS 1161 - 1998 grade St.-240 Complete all as specified and as directed by Engr-in-Charge.

Material and Labour for rolled Mild Steel joist, channel, angle or tee sections, fixed independently, without connection plate etc. (cut to ordinary lenghts i.e within 20mm of the length indicated. Conforming to Fe - 410W, Grade E- 250 Quality A Complete all as specified and as directed by Engr-in-Charge.

Material and Labour for Framed work such as grills, gratings, etc., with ends of bar shouldered and or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks & similar work conforming to Fe 410 or Fe-310-0 all as specified.

Material and labour for preparation of new steel surfaces or previously untreated surfaces, not otherwise described, exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified.

Material and Labour for Pre cast cement concrete 1:3:6, type C1, (20mm graded aggregate) as in cover slab for man holes and set in Cement Mortar 1:4 including finished top surfaces cover even & fair complete all as specified and directed by Engr-in-charge.

Material and Labour for Mild steel TMT bars 6 to 8 mm dia cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-charge.

Shanthi Construction

PRAGATHI BUILDERS

K. VENKATESH NAIDU

M.S.Trading Company