CWE/CHD-86/2026-27 SMART PERIODICAL SERVICES TO CERTAIN BUILDINGS AT K AREA UNDER GE CHANDIGARH

Taking down cement plaster of any description on brick walls or concrete surfaces upto 12 metre height including raking out joints, hacking for key, scrubbing down with water etc., including removal of rubbish etc., complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 10 mm thick over brick work or concrete surfaces in cement moratr 1:6, finished even and smooth without using extra cement at any height and providing necessary scaffolding, safety precautions and other requisite arrangement complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 10 mm thick over Chajja/ mumty/ Ceiling/ External exposed beam at any positon, in cement moratr 1:3, finished even and smooth without using extra cement at any height and providing necessary scaffolding, safety precautions and other requisite arrangement complete all as specified and as directed by Engineer-in-Charge.

M&L for Rendering 15 mm thick on fair faces of brick or concrete surfaces upto 12 metre height in cement mortar 1:4, including finishing the surfaces even and smooth without using extra cement and providing necessary scaffolding, safety precautions and other requisite arrangement complete all as specified and as directed by Engineer-in-Charge.

Supply only liquid water proofing compound, ISI marked, complete all as specified as specified and directed.

M&L for Repair to RCC sunshades, chajjas, balconies, columns, bands, beams and similar RCC work at any position up to 15 meter height by dismantling loose/ disintegrated portion including necessary scaffolding and safety arrangements including chicken wire mesh of size 12.5 mm x 1 mm securing with clips/ chicken wire mesh wherever required and dubbing out with cement concrete 1:1.5:3, 15 mm to 50 mm thick, using 6 to 12 mm graded stone aggregate to make up and finished the required shape including provision of necessary scaffolding and formwork up to four storey building, if required and finished with 5 mm thick rendering in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided complete all as specified and as directed by Engineer-in-Charge.

M&L for Reinforced cement concrete 1:2:4 (nominal mix), type B-1 (using 20 mm graded stone aggregates) as in chajja, parapets and the like, at any height and providing necessary scaffolding, safety precautions and other requisite arrangement complete all as specified and as directed by Engineer-in-charge.

M&L for installation of rebar by using hilti hammer drill with carbide drill bit, Chemical dispensing gun for inserting RE-500V3 Chemical upto minimum depth of (10 x dia of bar) as in chajah, beam, lintel, columns slab and parapet at any height Before inserting an anchor/ bar, hole must be free from dust debris, water ice and oil grease etc., complete all as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge. Note:- (i) Reinforcement will be measured and paid separately. (ii) Rates are inclusive of form work, shuttering and safely measures. (iii) Dia of bar 12 mm/10 mm

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.