REPAIR/MAINTENANCE OF WOODEN AND STEEL FURNITURE OF AF STN UNDER GE (AF) CHABUA

Amount

Repairs to Almirah large Steel 1/2H,1/2S for the following:-

Removing of unserviceable base and S&F new base made of two number MS channels out of 1mm MS sheet shape with ends covered and welded to bottom of almirah duly painted the base internally/externally with existing colour over a coat of red oxide primer complete all as directed.

Removing of unserviceable full size shelf and S&F new shelf made out of 1 mm thick MS sheet including one coat of synthetic enamel paint over a coat of primer.

Removing of unserviceable half shelving and S&F new half shelf made out of 1 mm thick MS sheet including one coat of synthetic enamel paint over a coat of primer.

Removing of unserviceable hanging rod and S&F with 20mm dia steel chromium plated 1.25mm thick with sockets wherever required .

Removing of unserviceable locks and S&F new locks of existing pattern with two keys.

Removing of unserviceable handle and S&F new steel chromium plated handle 100mm long of existing pattern.

Repairs to Almirah large Steel for the following :-

Removing of unserviceable base and S&F new base made of two numbers MS channels out of 1mm MS sheet U shaped with ends covered and welded to bottom of almirah duly painted the base internally/externally with existing colour over a coat of red oxide primer complete all as directed.

Taking out worn out shelf and S&F new shelf made out of 1 mm thick MS sheet including two coats of synthetic enamel paint over a coat of primer

Removing of unserviceable locks and S&F new locks of existing pattern with two keys.

Removing of unserviceable handle and S&F new MS chromium plated handles of existing pattern.

Repairs to Almirah medium Steel for the following :-

Removing of unserviceable base and S&F new base made of two number MS channels out of 1mm MS sheet shape with ends covered and welded to bottom of almirah duly painted the base internally/externally with existing colour over a coat of red oxide primer complete all as directed.

Taking out worn out shelf and S&F new shelf made out of 1 mm thick MS sheet including two coats of synthetic enamel paint over a coat of primer.

Removing of unserviceable locks and S&F new locks of existing pattern with two keys.

Removing of unserviceable handle and S&F new MS chromium plated handles of existing pattern.

Repairs to Bed Ply top for the following :-

Removing old unserviceable head board from Bed hard and supply new head board made out of 18mm thick both sides pre-laminated particle board screwed to MS strip in the existing position including 4mm thick timber beading around the edging all as directed.

Removing old unserviceable foot board from Bed hard and supply new foot board made out of 18mm thick both sides pre-laminated particle board screwed to MS strip in the existing position including 4mm thick timber beading around the edging all as directed.

Removing of unserviceable Plywood from Bed hard and S&F new ply wood 12mm thick BWR, phenol bonded ISI marked fixed with 4mm dia 60mm long nut & bolts in its existing position complete as directed.

Removing u/s shoes from legs and S&F new rubber shoes best quality as directed.

Repairs to Bed Ply top for the following :-

Removing old unserviceable head board from Bed ply top and S&F new head board made out of 1st class hard wood, duly covered with new 4mm thick plywood one side teak finish (Make-Green Ply/Kit Ply) fixed on both side of head board including 4mm thick timber beading around the edging all as directed.

Removing old unserviceable foot board from Bed ply top and S&F new foot board made out of 1st class hard wood, duly covered with new 4mm thick plywood one side teak finish (Make-Green Ply/Kit Ply) fixed on both side of head board including 4mm thick timber beading around the edging all as directed.

Removing of unserviceable long rail and S&F new long rail made of 1st class hard wood all as directed.

Removing of unserviceable short rail and S&F new short rail made of 1st class hard wood all as directed.

Removing u/s ply wood from existing position and S&F new plywood (Make-Green Ply/Kit Ply, Century/Bhutan Board)12mm thick, ISI mark with screw all as directed.

Repairs to Bin soiled linen large for the following :-

Removing decayed top of lid from its existing position and replace the same with 6mm thick teak veneer face including removing of unserviceable framing and intermediate braces with 1st class HW of existing sizes wherever required and fixed with 3mm x 25mm timber beading around the top complete all as directed.

Removing decayed front/back from its existing position and replace the same with 6mm thick teak veneer face including removing of unserviceable bottom horizontal rail and top rail with 1st class HW of existing sizes wherever required complete all as directed.

Removing of unserviceable bottom from its existing position and replace the same with 12mm thick plywood BWR including removing of unserviceable framing and intermediate braces with 1st class HW of existing sizes wherever required complete all as directed.

Repairs to Book Case Steel for the following :-

Taking out unserviceable glass pane from shutter and S&F new 4mm pane glasses keeping the shutter freely swinging up and rolled in all as directed.

Removing of unserviceable lock and S&F new lock of existing pattern with two keys.

Repairs to Book shelf open large steel for the following :-

Taking out worn out shelf and S&F new shelf made out of 1 mm thick MS sheet including two coats of synthetic enamel paint over a coat of primer

Tightening and welding the slotted angle MS framing wherever required.

Repairs to Book shelf open small for the following :-

Taking out unserviceable top from its existing position and S&F new top with 19mm thick plywood BWR with 4mm thick timber edging complete all as directed..

Taking out unserviceable bottom from its existing position and S&F new bottom with 19mm thick plywood BWR with 4mm thick timber edging on face complete all as directed.

Taking out unserviceable sides from its existing position and S&F new side with 19mm thick plywood BWR with 4mm thick timber edging on face complete all as directed.

Taking out unserviceable shelves from its existing position and provision of new shelves with 19mm thick pre laminated particle with both side teak laminated shade duly covered with 3mm thick timber edging complete all as directed..

Repairs to Chair CB office for the following :-

Taking out unserviceable rear legs and provn of new legs made of 1st class hard wood as directed.

Taking out unserviceable front legs and provn of new legs made of 1st class hard wood all as directed.

Taking out unserviceable rails and provn of new rails made of 1st class hard wood all as directed.

Taking out unserviceable back rest stiffener and provn of new back rest stiffener made of 1st class hard wood all as directed.

Taking out unserviceable stiffener and provn of new stiffener made of 1st class hard wood all as directed.

Taking out unserviceable arm and provn of new arm made of 1st class hard wood all as directed.

Repairs to Chair Computer w/arm for the following :-

Taking out u/s seat and S&F new seat with 12 m thick hot pressed ply wood made to shape for seat and shall be upholstered with Fabric of approved colour and moulded polyurethane foam with PVC lipping all around.

Taking out u/s back and S&F new back with 12 m thick hot pressed ply wood made to shape for back and shall be upholstered with Fabric of approved colour and moulded polyurethane foam with PVC lipping all around.

Taking out u/s hand rest and S&F new hand rest of black integral skin polyurethane reinforced with MS insert complete.

Taking out u/s base and S&F new 5 star base fitted with twin wheel castors including u/s hydraulic system where applicable .

Taking down u/s wheel from the base and supply and fixing wheel as per existing size and pattern complete all as specified and directed.

Repairs to Chair Computer without arm for the following :-

Taking out u/s seat and S&F new seat with 12 m thick hot pressed ply wood made to shape for seat and shall be upholstered with Fabric of approved colour and moulded polyurethane foam with PVC lipping all around.

Taking out u/s back and S&F new back with 12 m thick hot pressed ply wood made to shape for back and shall be upholstered with Fabric of approved colour and moulded polyurethane foam with PVC lipping all around.

Taking out u/s base and S&F new 5 star base fitted with twin wheel castors including u/s hydraulic system where applicable .

Taking down u/s wheel from the base and supply and fixing wheel as per existing size and pattern complete all as specified and directed.

Repairs to Chair dining for the following :-

Taking out unserviceable rear legs and provn of new legs made of 1st class hard wood all as directed.

Taking out unserviceable front legs and provn of new legs made of 1st class hard wood all as directed.

Taking out unserviceable rails and provn of new rails made of 1st class hard wood all as directed.

Taking out unserviceable back rest and provn of new back rest made of 1st class hard wood all as directed.

Taking out unserviceable stiffeners and provn of new stiffeners made of 1st class hard wood all as directed.

Repairs to Chair dining JCOs/ORs for the following :-

Taking out unserviceable rear legs and provn of new legs made of 1st class hard wood all as directed.

Taking out unserviceable front legs and provn of new legs made of 1st class hard wood all as directed.

Taking out unserviceable rails and provn of new rails made of 1st class hard wood all as directed.

Taking out unserviceable back rest and provn of new back rest made of 1st class hard wood all as directed.

Taking out unserviceable stiffeners and provn of new stiffeners made of 1st class hard wood all as directed.

Removing of unserviceable seat and S&F new PVC seat as per existing size and pattern complete all as specified and directed.

Repairs to Chair easy for the following:-:-

Taking out unserviceable rear legs and provn of new legs made of 1st class hard wood all as directed.

Taking out unserviceable front legs and provn of new legs made of 1st class hard wood all as directed.

Taking out unserviceable side rails and provn of new side rails made of 1st class hard wood all as directed.

Removing of unserviceable seat and S&F new seat made out of 1st class hard wood timber wrought duly caned with new plastic cane 2mm wide half round for main caning and border with 3.5mm wide half round cane and high glow polishing of frame with french polish complete.

Removing of unserviceable back and S&F new back made out of 1st class hard wood timber wrought duly caned with new plastic cane 2mm wide half round for main caning and border with 3.5mm wide half round cane and high glow polishing of frame with french polish complete.

Taking out unserviceable arm rest and provn of new arm rest made of 1st class hard wood all as directed.

Repairs to Chair office CB for the following :-

Taking out unserviceable rear legs and provn of new legs made of 1st class hard wood all as directed.

Taking out unserviceable front legs and provn of new legs made of 1st class hard wood all as directed.

Taking out unserviceable rails and provn of new rails made of 1st class hard wood all as directed.

Taking out unserviceable stiffeners and provn of new stiffeners made of 1st class hard wood all as directed.

Taking out unserviceable arm and provn of new arm made of 1st class hard wood all as directed.

Repair to Chair Revolving high back for the following :-

Taking out u/s seat and S&F new seat with 12mm thick ply wood BWR made to shape for seat, upholstered with Fabric of approved colour and moulded polyurethane foam with PVC lipping all around.

Taking out u/s back and S&F new back with 12 mm thick ply wood BWR made to shape of back, upholstered with Fabric of approved colour and moulded polyurethane foam with PVC lipping all around

Taking out u/s hand rest and S&F new hand rest of black integral skin polyurethane reinforced with MS insert complete

Taking out u/s base and S&F new 5 star base fitted with twin wheel castors including u/s hydraulic system where applicable.

Repairs to Chair Revolving medium back for the following :-

Taking out u/s seat and S&F new seat with 12mm thick ply wood BWR made to shape for seat, upholstered with Fabric of approved colour and moulded polyurethane foam with PVC lipping all around.

Taking out u/s back and S&F new back with 12 mm thick ply wood BWR made to shape of back, upholstered with Fabric of approved colour and moulded polyurethane foam with PVC lipping all around

Taking out u/s hand rest and S&F new hand rest of black integral skin polyurethane reinforced with MS insert complete

Taking out u/s base and S&F new 5 star base fitted with twin wheel castors including u/s hydraulic system where applicable.

Repairs to Chair Steel Executive visitors for the following :-

Taking out u/s seat and S&F new seat with 12 m thick ply wood BWR made to shape of seat ,upholstered with Fabric of approved colour and moulded polyurethane foam with PVC lipping all around.

Taking out u/s back and S&F new back with 12 mm thick ply wood BWR made to shape of back, upholstered with Fabric of approved colour and moulded polyurethane foam with PVC lipping all around

Taking out u/s hand rest and S&F new hand rest of black integral skin polyurethane reinforced with MS insert complete

Repairs to Chair verandah for the following :-

Removing of old cane from seat of back and replace with new plastic cane 3.5mm wide half round complete all as specified and as directed.

Replacement of old, cracked and decayed rubber shoes from its existing position and replace with new rubber shoe best quality in the same position as directed.

Repairs to Chair WB without arm for the following:-

Taking out unserviceable rear legs and provn of new legs made of 1st class hard wood as directed.

Taking out unserviceable front legs and provn of new legs made of 1st class hard wood all as directed.

Taking out unserviceable rails and provn of new rails made of 1st class hard wood all as directed.

Taking out unserviceable back rest and provn of new back rest made of 1st class hard wood all as directed.

Taking out unserviceable stiffener and provn of new stiffener made of 1st class hard wood all as directed.

Taking out old unserviceable seat and provn of new seat of 6mm thick ply wood BWR grade all as directed.

Repairs to Chair writing for the following :-

Taking out unserviceable rear legs and provn of new legs made of 1st class hard wood all as directed.

Taking out unserviceable front legs and provn of new legs made of 1st class hard wood all as directed.

Taking out unserviceable rails and provn of new rails made of 1st class hard wood all as directed.

Taking out unserviceable back rest and provn of new back rest made of 1st class hard wood all as directed.

Taking out unserviceable stiffeners and provn of new stiffeners made of 1st class hard wood all as directed.

Taking out unserviceable arm and provn of new arm made of 1st class hard wood all as directed.

Repairs to Charpoy GI Pipe for the following :-

Taking out unserviceable long rails and fixing new long rails 1980 mm long duly threaded at both end out of GI tube 32mm dia medium grade of 1.98 m long all as directed.

Taking out unserviceable short rails and fixing new short rails made of GI tube 32mm dia medium grade of 0.90 m long out of u/s long rails so obtained from 11(a) here in above all as directed.

Taking out unserviceable legs and fixing new legs 0.44 m long, out of u/s short/long rails so obtained from 11(b) here in above and plugged the bottom of legs with 50mm dia circular 1st class hard wood block.

Taking out unserviceable elbow and S&F new GI elbow 32mm dia, three way medium grade, ISI marked duly screwed legs, short rails and long rails, tightly in to the angle elbow fully housed by 22mm all as directed.

Taking out unserviceable check nut from long rails and S&F new check nuts of 10mm wide,32mm dia in its existing position .

Removing of existing unserviceable ply top from charpoy , tightening the frame and S&F new ply wood 12mm thick BWR, ISI marked with 4mm dia 60mm long nut & bolts ,03 Nos of MS flat iron 6mmx40mm with top welded to long rail to long rail on equal distance. 03 Nos of 4mm dia hole to be provided for fixing ply wood. 4 Nos of MS flat 100mmx25mmx6mm to be welded to the short rail for fixing ply wood all as directed.

Repairs to Hat stand with mirror for the following :-

Removing decayed board from the hat stand and supply and fixing new 18 mm thick pre-laminated particle board exterior grade ISI marked with one side teak finish fixed with 4mm thick timber beading around the edging all as as directed.

Replacement of unserviceable metal peg and re-fixing with new chromium plated metal peg 120 mm long in its existing position as directed.

Removing defade mirror from the hat stand and replace with new 5 mm thick electro copper plated mirror of size 300mm x 460 mm best quality (Modi/Atul Saint Gobbin ) and as directed.

Repairs to Locker bed side for the following :-

Removing of old u/s doors from locker bed and provision of new 18 mm thick pre-laminated particle board with 20 mm thick timber beading all around including necessary fittings such as MS butt hinges 75mm long ,bow handle aluminum 100 mm long, hasp staple 100mm all as directed.

Replacement of sides with new 6mm thick plywood BWR and painting with synthetic enamel paint externally and internally of existing colour over a coat of primer complete all as directed.

Replacement of back ply with new 6mm thick plywood BWR and painting with synthetic enamel paint externally and internally of existing colour over a coat of primer complete all as directed.

Taking down decayed top and supply & fixing with new top 18 mm thick pre-laminated particle board exterior grade ISI mark with 4mm thick timber beading all around the edging complete all as directed.

Taking down decayed bottom and supply & fixing with 18 mm thick plywood BWR and painting with synthetic enamel paint externally and internally of existing colour over a coat of primer complete all as directed.

Repairs to Locker bed side steel for the following :-

Removing of u/s leg and S&F new leg made out of 1mm MS sheet shape with ends covered and welded to bottom of locker duly painted the base internally/externally with existing colour over a coat of red oxide primer complete all as directed.

Taking out worn out shelf and S&F new shelf made out of 1 mm thick MS sheet including two coats of synthetic enamel paint over a coat of primer.

Taking out worn out partition and S&F new partition made out of 1 mm thick MS sheet including two coats of synthetic enamel paint over a coat of primer.

Taking out worn out shutter and S&F new shutter made out of 1 mm thick MS sheet including two coats of synthetic enamel paint over a coat of primer.

Replacement of u/s fittings such as Chromium plated steel handle 100 mm long, hasp & staple 75mm of existing pattern as directed.

Repairs to Mirror dressing for the following :-

Removing of old unserviceable side and S&F new side with18mm thick pre-laminated particle board exterior grade ISI marked complete all as directed.

Removing of cracked/broken shelf and S&F new shelf out of 5.5mm thick glass slab of approved quality as directed.

Removing of unserviceable mirror and S&F new mirror 5.5mm thick float glass of Atul/Modiguard,free from all defects, disorted images etc. provided with 12mm thick BWR phenol bonded plywood backing with 1st class HW frame all round the mirror out of 50mm x 28mm in section cut to shape and sloping on sides complete.

Removing of unserviceable leg and S&F new 1st class HW leg made to shape out of 38mm x 38mm in section complete as directed.

Repairs to Peg table for the following :-

Taking down decayed top and supply and fixing new top 18 mm thick pre-laminated particle board exterior grade with 4mm thick timber beading all around the edging complete all as directed.

Taking out broken legs and provn of new legs made of 1st class hard wood all as directed.

Removing unserviceable rails to the longer sides and supply and fixing new rails made of 1st class hard wood, complete all as specified and all as directed.

Removing unserviceable rails to the shorter sides and supply and fixing new rails made of 1st class hard wood, complete all as specified and all as directed.

Repairs to Shoe rack steel for the following :-

Removing old painted surface by scraping and spray paint with 1st class synthetic enamel paint grey internally/externally including removing of denting wherever required.

Removing worn out shelves and S&F new shelves made out of 1 mm thick MS sheet duly welded in its existing position all as directed.

Repairs to Side board for the following :-

Replacement of door with new 18mm thick pre-laminated particle board with 12 mm thick timber beading all around including necessary fittings such as MS butt hinges 75mm long bow handle aluminium 100 mm long, hasp staple 100mm all as directed including polishing the wooden portion with french polish complete all as directed.

Replacement of side with new 18mm thick pre-laminated particle board exterior grade ISI marked complete all as directed.

Taking out u/s back and provn of new back of 6mm thick ply wood BWR grade ISI Marked.

Removing of old u/s shelf and S&F new shelf with 18mm thick pre- laminated particle board white colour as per existing size & shape and all as directed.

Removing decayed drawer from its existing position and replace the same as per the existing size and front side with 18 mm thick pre-laminated particle board with one knob 25mm dia complete all as directed.

Repairs to Sofa single seater with cushion ;-

Taking out u/s rear legs and provn of new legs made of 1st class HW and all as directed.

Taking out u/s front legs and provn of new legs made of 1st class HW and all as directed.

Taking out u/s rails and provn of new rails made of 1st class HW and all as directed.

Taking out u/s seat frame and provn of new seat frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed.

Taking out u/s back frame and provn of new back frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed.

Taking out u/s arm and provn of new arm made of 1st class HW all as directed.

Removing u/s cushion and provn of new cushion made of 100 mm thick 'U' foam, 32 density, ISI marked of size 530mmx560mm and covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 250/- per RM) duly wrapped with long cloth of existing pattern and as directed.

Repairs to Sofa 3 seater with cushion ;-

Taking out u/s rear legs and provn of new legs made of 1st class HW and all as directed.

Taking out u/s front legs and provn of new legs made of 1st class HW and all as directed.

Taking out u/s long rails and provn of new rails made of 1st class HW and all as directed.

Taking out u/s short rails and provn of new short rails made of 1st class HW and all as directed.

Taking out u/s seat frame for 3 seaters and provn of new seat frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed.

Taking out u/s back frame for 3 seaters and provn of new back frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed.

Taking out u/s arm and provn of new arm made of 1st class HW all as directed.

Removing u/s cushion and provn of new cushion made of 100 mm thick 'U' foam, 32 density, ISI marked of size 530mmx560mm and covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 250/- per RM) duly wrapped with long cloth of existing pattern and as directed.

Repairs to Sofa 4 seater with and w/o arms for the following :-

Taking out u/s rear legs and provn of new legs made of 1st class HW and all as directed.

Taking out u/s front legs and provn of new legs made of 1st class HW and all as directed.

Taking out u/s rails and provn of new rails made of 1st class HW and all as directed.

Taking out u/s seat frame and provn of new seat frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed.

Taking out u/s back frame and provn of new back frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed.

Taking out u/s arm and provn of new arm made of 1st class HW all as directed.

Removing u/s cushion and provn of new cushion made of 100 mm thick 'U' foam, 32 density, ISI marked of size 530mmx560mm and covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 250/- per RM) duly wrapped with long cloth of existing pattern and as directed.

Repairs to Sofa 5 seater with cushion ;-

Taking out u/s rear legs and provn of new legs made of 1st class HW and all as directed.

Taking out u/s front legs and provn of new legs made of 1st class HW and all as directed.

Taking out u/s long rails for 3 seater and provn of new rails made of 1st class HW and all as directed.

Taking out u/s long rails for single seater and provn of new rails made of 1st class HW and all as directed.

Taking out u/s short rails for 3 seater and provn of new short rails made of 1st class HW and all as directed.

Taking out u/s seat frame for 3 seaters and provn of new seat frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed.

Taking out u/s back frame for 3 seaters and provn of new back frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed.

Taking out u/s seat frame for single seater and provn of new seat frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed.

Taking out u/s back frame for single seater and provn of new back frame made of 1st class HW including the horizontal u/s wooden battens and polishing with French polish complete all as directed.

Taking out u/s arm and provn of new arm made of 1st class HW all as directed.

Removing u/s cushion and provn of new cushion made of 100 mm thick 'U' foam, 32 density, ISI marked of size 530mmx560mm and covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 250/- per RM) duly wrapped with long cloth of existing pattern and as directed.

Repairs to Table 900 x 600 with drawer for the following as directed:-

Taking down decayed top and S&F new top 18 mm thick pre-laminated particle board exterior grade ISI mark with 4mm thick timber beading all around the edging complete all as directed.

Replacing decayed bottom of drawer with new 6 mm thick ply wood, front side with 18 mm thick pre-laminated particle board one No 40mm knob of required colour all as directed.

Taking out unserviceable legs and provn of new legs made of well seasoned 1st class hard wood all as directed.

Taking out unserviceable long rails and provn of new long rails made of 1st class hard wood all as directed.

Taking out unserviceable short rails and provn of new short rails made of 1st class hard wood all as directed.

Taking out unserviceable stiffener and provn of new stiffener made of 1st class hard wood all as directed.

Repairs to Table 900 x 600 with drawer steel for the following as directed:-

Taking down decayed top and S&F new top 18 mm thick pre-laminated particle board exterior grade ISI mark with 4mm thick timber beading all around the edging complete all as directed.

Removing of unserviceable legs with 25 mm MS square tube of wall thickness 1.6mm and refixing the same in existing position of frame by welding complete all as specified and directed.

Welding to frame wherever required complete all as directed.

Replacement of rubber shoes with new one complete all as directed.

Repairs to Table 900 x 600 w/o drawer for the following :-

Taking down decayed top and S&F new top 18 mm thick pre-laminated particle board exterior grade ISI mark with 4mm thick timber beading all around the edging complete all as directed.

Taking out unserviceable legs and provn of new legs made of 1st class hard wood all as directed.

Taking out unserviceable long rails and provn of new long rails made of 1st class hard wood all as directed.

Taking out unserviceable short rails and provn of new short rails made of 1st class hard wood all as directed.

Taking out unserviceable stiffener and provn of new stiffener made of 1st class hard wood all as directed.

Repairs to Table 900x900 for the following :-

Taking down decayed top and S&F new top 18 mm thick pre-laminated particle board exterior grade ISI mark with 4mm thick timber beading all around the edging complete all as directed.

Taking out unserviceable legs and provn of new legs made of 1st class hard wood all as directed.

Taking out unserviceable rails and provn of new rails made of 1st class hard wood all as directed.

Repairs to Table 900x900 steel for the following :-

Taking down decayed top and S&F new top 18 mm thick pre-laminated particle board exterior grade ISI mark with 4mm thick timber beading all around the edging complete all as directed.

Removing of unserviceable legs with 25 mm MS square tube of wall thickness 1.6mm and refixing the same in existing position of frame by welding complete all as specified and directed.

Welding to frame wherever required complete all as directed.

Replacement of rubber shoes with new one complete all as directed.

Repairs to Table Bedside for the following :-

Taking out decayed top from table bedside and replaced with 12 mm thick pre-laminated particle board exterior grade ISI mark with 4mm thick timber beading at face end complete all as directed.

Taking out decayed bottom from table bedside and replaced with 12 mm thick pre-laminated particle board exterior grade ISI mark with 4mm thick timber beading at face end complete all as directed.

Taking out decayed shelves from table bedside and replaced with 12 mm thick pre-laminated particle board exterior grade ISI mark with 4mm thick timber beading at face end complete all as directed.

Replacement of back with new 6 mm thick plywood BWR as directed.

Repairs to Table Centre for the following:-

Taking down decayed top and S&F new top 18 mm thick pre-laminated particle board exterior grade ISI mark with 4mm thick timber beading all around the edging complete all as directed.

Taking out unserviceable legs and provn of new legs made of 1st class hard wood and all as directed.

Taking out unserviceable long rails and provn of new long rails made of 1st class hard wood and all as directed.

Taking out unserviceable short rails and provn of new short rails made of 1st class hard wood and all as directed.

Table Computer (Make-Godrej, Model-C2)

Taking down u/s top and supply and fixing new top 18 mm thick pre-laminated particle board exterior grade with 4mm thick timber beading all around the edging complete all as directed.

Taking down u/s Key board tray and supply and fixing new tray duly fitted on telescopic channels with smooth sliding towards front and back as per existing size and pattern complete all as specified and directed.

Taking down u/s bottom shelf and supply and fixing new bottom shelf 18 mm thick pre-laminated particle board exterior grade with 4mm thick timber beading all around the edging complete all as directed.

Taking down u/s wheel from the bottom of table and supply and fixing wheel as per existing size and pattern complete all as specified and directed.

Repairs to Table dinning ORs for the following :-

Taking down decayed top and supply and fixing new top of 18 mm thick pre-laminated particle board exterior grade with 4 mm thick teakwood beading all around the edging complete all as specified and shown on drawings.

Material and labour for applying one coat of synthetic enamel paint of approved colour by spray painting including removing old painted surface by scraping complete all as specified and directed.

Removing of u/s legs of size 100 mm long ,25 mm size MS square tube and refixing the same in existing position of frame by welding complete all as specified and directed.

Removing of u/s cracked or decayed rubber shoes and replacing the same with new rubber shoes of best quality complete all as specified and directed.

Repairs to Table dining 6 persons for the following :-

Taking down decayed top and supply and fixing new top 18mm thick pre-laminated particle board exterior grade with 4mm thick 1st class HW beading all around the edging complete all as directed.

Taking out decayed legs and provn of new legs made of 1st class hard wood all as directed.

Taking out decayed long rail and provn of new long rail made of 1st class hard wood all as directed.

Taking out decayed short rail and provn of new short rail made of 1st class hard wood all as directed.

Repairs to Table dining 8 persons for the following :-

Taking down decayed top and supply and fixing new top 18mm thick pre-laminated particle board exterior grade with 4mm thick 1st class hard wood beading all around the edging complete all as directed.

Taking out decayed legs and provn of new legs made of 1st class hard wood all as directed.

Taking out decayed long rail and provn of new long rail made of 1st class hard wood all as directed.

Taking out decayed short rail and provn of new short rail made of 1st class hard wood all as directed.

Repairs to Table dressing ladies for the following:-

Taking down decayed top and supply and fixing new top with 12mm thick pre-laminated particle board exterior grade with one side teak face to the exposed surface all as directed.

Taking down decayed side and supply and fixing new side with 12mm thick pre-laminated particle board exterior grade with one side teak face to the exposed surface all as directed.

Taking down decayed bottom and supply and fixing new bottom with 12mm thick pre-laminated particle board exterior grade with one side teak face to the exposed surface all as directed.

Replacing decayed bottom, sides & back of drawer with new 6 mm thick ply wood, front side with 18mm thick pre-laminated particle board all as directed.

Removing of defade mirror and replaced with new 5mm thick electro copper plated mirror (Modi/Atul Saint Gobbin of size as specified with a frame cut to shape and fixed 12 X 20 mm HW and sloping on sides all as directed.

Repairs to Table Office clerk for the following :-

Taking down unserviceable decayed top and supply and fixing new top 18mm thick pre-laminated particle board exterior grade with 4mm thick timber beading all around the edging complete all as directed.

Replacing decayed bottom of drawer with new 6 mm thick ply wood, front side with 18mm thick pre-laminated particle board and all as directed.

Removing broken legs and supply and fixing new legs of 1st class hard wood and all as directed.

Supply and fixing new brass lock for drawer with duplicate key of existing pattern including removing old unserviceable lock.

Repairs to Table Office Clerk Steel for the following :-

Taking down unserviceable decayed top and supply and fixing new top 18mm thick pre-laminated particle board exterior grade with 4mm thick timber beading all around the edging complete all as directed.

Taking down unserviceable drawer and supply and fixing new drawer of 1mm thick MS sheet keeping the drawer freely pulling in and out complete all as directed.

Supply and fixing new brass lock for drawer with duplicate key of existing pattern including removing old unserviceable lock.

Repairs to Table Office Officer wooden for the following :-

Taking down unserviceable decayed top and supply and fixing new top 18mm thick pre-laminated particle board exterior grade with 4mm thick timber beading all around the edging complete all as directed.

Replacing decayed bottom of drawer with new 6 mm thick ply wood, front side with 18mm thick pre-laminated particle board and all as directed.

Removing broken legs and supply and fixing new legs of 1st class hard wood and all as directed.

Repair to Table Office Officer Steel for the following :-

Taking down decayed top and S&F new top made out of 18 mm thick pre-laminated particle board exterior grade with 4mm thick timber beading all around the edging complete.

Taking out worn out drawer and S&F new drawer made out of 1 mm thick MS sheet with locking arrangement and recessed handle keeping the drawer freely pulling in and out including one coat of synthetic enamel paint over a coat of primer.

Taking out worn out leg and S&F new leg made out of 25mm MS square tube of 1.6mm wall thickness welded to frame including one coat of synthetic enamel paint over a coat of primer.

Taking down unserviceable shutter of cupboard and supply and fixing new shutter of 1mm thick MS sheet complete all as directed.

Supply and fixing new brass lock for drawer with duplicate key of existing pattern including removing old unserviceable lock.

Replacement of old, cracked and decayed rubber shoes from its existing position and replace with new rubber shoe best quality in the same position as directed.

Repairs to Table Writing for the following:-

Taking down decayed top and S&F new top 18 mm thick pre-laminated particle board exterior grade ISI mark with 4mm thick timber beading all around the edging complete all as directed.

Replacing decayed bottom, sides & back of drawer with new 6 mm thick ply wood, front side with 18 mm thick pre-laminated (one side) particle board and provn of one No 40mm knob of required colour all as directed.

Taking out unserviceable legs and provn of new legs made of well seasoned 1st class hard wood all as directed.

Repairs to Table writing medium for the following :-

Taking down unserviceable decayed top and supply and fixing new top 18mm thick pre-laminated particle board exterior grade with 4mm thick timber beading all around the edging complete all as directed.

Replacing decayed bottom of drawer with new 6 mm thick ply wood, front side with 18mm thick pre-laminated particle board and all as directed.

Removing broken legs and supply and fixing new legs of 1st class hard wood and all as directed.

Repairs to Teapoy for the following :-

Taking down decayed top and supply and fixing new top 18mm thick pre-laminated particle board exterior grade with 4mm thick HW beading all around the edging complete all as directed.

Taking out broken legs and provn of new legs made of 1st class hard wood all as directed.

Taking out broken long rails and provn of new rails made of 1st class hard wood all as directed.

Repairs to Teapoy Verandah for the following:-

Taking down decayed top and supply and fixing new top 18 mm thick pre-laminated particle board exterior grade with 4mm thick timber beading all around the edging complete all as directed.

Welding to frame wherever required complete all as directed.

Replacement of 4 nos rubber shoes with new one complete all as directed.

Repairs to charpoy with hard top for the following :-

Removing of unserviceable Plywood from charpoy ,welded to MS framing wherever required, scrapping off old painted surface and paint the surface with spray machine with two coats of synthetic enamel paint OG colour (Make- Berger/Shalimar/ Jenson & Nicholson/Asian paint) complete as directed.

S&F new ply wood 12mm thick BWR, ISI marked with 4mm thick timber beading all around complete all as directed..

Removing u/s shoes from legs and S&F new rubber shoes best quality as directed.

Repairs to Table typist for the following :-

Taking down decayed top and S&F new top 18 mm thick pre-laminated particle board exterior grade ISI mark with 4mm thick timber beading all around the edging complete all as directed.

Replacing decayed bottom of drawer with new 6 mm thick ply wood, front side with 18 mm thick pre-laminated particle board one No 40mm knob of required colour all as directed.

Taking out unserviceable legs and provn of new legs made of 1st class hard wood all as directed.

Taking out unserviceable long rails and provn of new long rails made of 1st class hard wood all as directed.

Taking out unserviceable short rails and provn of new short rails made of 1st class hard wood all as directed.

Taking out unserviceable stiffener and provn of new stiffener made of 1st class hard wood all as directed.

Supply and fixing new brass lock for drawer with duplicate key of existing pattern including removing old unserviceable lock.

Material and labour for removing of old cane from various chairs such as chair dining, chair writing, chair easy, chair CB office etc. and replacing the same with new 2mm wide for main caning and border with 3 mm wide cane all as specified.

Material and labour for polishing to various wooden furniture with French polish including removing of old polish complete all as directed:-

Almirah large 1/2H,1/2S

Almirah large with shelf

Almirah Mess utensils

Bed with ply top

Bin soiled linen

Book shelf open large

Book shelf open Small

Chair CB office

Chair Dining

Chair Dining JCOs/Ors

Chair Easy

Chair Office CB

Chair WB without arm

Chair Writing

Hat stand with mirror

Peg table

Locker Bed side

Mirror dressing

Rack side 4 spaces

Side Board

Stool dressing

Sofa single seater

Sofa three seater

Sofa five seater

Side Board

Table bed side

Table 3'x2' with drawer

Table 3'x2' without drawer

Table 900x900x760mm

Table Centre

Table Centre two tier

Table dining 6 persons

Table dining 8 persons

Table dressing gents

Table dressing ladies

Table office clerk

Table office officer

Table Writing

Table writing medium

Teapoy

Tray for table 2 spaces

Tray for table 4 spaces

Almirah large steel

Almirah large steel 1/2S,1/2H

Almirah medium steel

Bed hard with ply top

Book case steel

Book shelf open large steel

Chair Verandah MS

Ladder for loft

Locker bedside steel

Rack steel 6'-3"x1'-6"x3'-6"

Steel rack skeleton

Table 3'x2' with drawer steel

Table 3'x3' steel

Table dining ORs

Table Hav/ORs steel

Table Office Clk steel

Table Office Officer steel

Teapoy Verandah

Schedule of Credit

M/S R G Construction

M/S N K SAI TRADING

M/S P R SINGH AND SONS

M/s Sashi Enterprise