Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹90.0 LAccepted-AOC C O AKBAR FURNITURE HOUSE MALHAR MORH GARHI UDHAMPUR J K 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹96.9 L+₹4.2 L (4.49%)Rejected-Finance NEW JAIL ROAD UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-Finance NOT BEING LOWEST BIDDER | |
| 3 | L3₹98.5 L+₹5.8 L (6.28%)Rejected-Finance HOUSE NO 93 WARD NO 8 NEAR ISKON TEMPLE UDHAMPUR J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L3 | Rejected-Finance NOT BEING LOWEST BIDDER | |
| 4 | L4₹1.2 Cr+₹27.2 L (29.4%)Rejected-Finance JAGANOO PO JAGANOO JAGANOO DISTT UDHAMPUR1 UDHAMPUR JAMMU KASHMIR 182124 | UDHAMPUR | JAMMU AND KASHMIR | 182124 | L4 | Rejected-Finance NOT BEING LOWEST BIDDER |
Tender Value
₹1.4 Cr
EMD Value
₹2.1 L
Closing Date
13 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Sachin Sharma CWE
Military Engineer Services, Commander Works Engineer, Udhampur, PO - Garhi, Udhampur-182121
COMPRESSIVE MAINT IN MD ACCN AND OTM ACCN IN AOR OF AGE B/R-II UNDER GE (SOUTH) UDHAMPUR
2024_MES_641510_1
CWE/U(S)-93/2023-24
Open Tender
Civil Works
Item Rate
270 days
Udhampur
As per NIT
6 documents required · 6 mandatory
₹1,000
GE (SOUTH) UDHAMPUR
₹2.1 L
10 May 2024
8 Feb 2024
19 Mar 2024
8 Feb 2024
13 Mar 2024
1 Mar 2024
9 Feb 2024 - 19 Feb 2024
Amount
Removing existing paint by scrapping with TruCare Wall Sander : L-01/H-01 (having mechanical vacuum mechanism) or equivalent as recommended by the manufacturer and approved by the GE, having RPM not less than 1500, sanding pad of 80 Grit having dia of 7”/9” to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and as directed.
Providing and applying 1mm thick waterproof cement based putty @ 1Kg (undiluted) per Sqm of Asian Paints or its equivalent in Nerolac / Berger over the plastered / old painted wall after scrapping to prepare the surface even and smooth, complete all as specified and as directed with following:- Step 1- Mix the putty powered by adding 40-50% water and mix it with Putty mixer (Trucare Putty mixer capacity of min 2.5 kg putty per minute). Step 2- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Graco spray Machine (Model: EH 230 DI) or equivalent as recommended by the manufacturer and approved by the GE, having DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041” or by manually. Step 3- Allow 6-8 hrs time to dry the putty surface.
Sanding of the putty surface with Asian Paints TruCare wall sander: L-01/H-01 or equivalent in Berger/Nerolac (having mechanical vacuum mechanism) or equivalent as recommended by the manufacturer and approved by the GE, having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7”/9” to make the surface free from dust etc. by skilled labour, complete all as specified and as directed.
Providing and applying one coat of acrylic waterbased interior/exterior grade primer @ 0.8 ltr (undiluted)/10Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent as recommended by the manufacturer and approved by the GE, having an electric motor of min 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and as directed.
Providing and applying two coats of smooth acrylic emulsion with rich matt finish having voc less than 50 grams per ltr complying leed criteria @ 1 ltrs (undiluted)/10Sqm diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent as recommended by the manufacturer and approved by the GE, having an electric motor of min 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface in both the coats of paint, complete all as specified and as directed. Make : "Apex Ultima" of Asian Paint/"Weathercoat All Guard" of Berger Paints/Excel Total of Nerolac Paint
Note:- 1. (Applicable to Srl items No. 1 to 5 Here-in-above) At the time of uploading bids each tenderer shall upload a copy of MOU towards triparty agreement between tenderer, Manufacturer of Paints from Asian Paints/Berger Paints/Goodlass Nerolac Paints and their Applicators, for material and execution of work from any of the said manufacturers. Financial Bids of only those bidders shall be admitted whosoever shall upload a legitimate MOU. 2. Terms of the MOU so entered between tenderes, Applicators and Manufacturers mentioned above shall also cover the gaurantee from manufacturer of paints for any defect in work executed by their applicator for a period of 3 Years. All other aspects with regard to payment, execution of work or other legal points shall be solely as decided between the tenderer, Paint manufacturer & Applicator. Department shall in no way be responsible for any complicacy arising at a later stage between the parties to MOU with regard to payments or execution of work. 3. (Applicable to Srl items other than covered under Note 1 to 5 here-in-before). The necessary steel scaffolding upto G+3 storeyed wherever required to execute the work shall be provided by the contractor with all safety equipments and the cost of providing scaffolding & safety equipments shall be deemed to be included in the quoted rates of the contractor and nothing extra shall be admissible on this account. 4. The work shall be executed in restricted area and head loss etc. The contractors are advised to consider this aspect while quoting his rates. Nothing whatsoever on this account shall be admissible at later stage.
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre of approved manufacturer of required shade and colour complete, as per manufacturer's specification, two or more coats on new work, complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.
Description all as per item No 08 above but area exceeding 1.50 square metre and not exceeding 4 square metre each.
Taking down shutters of any descriptions area exceeding 1 square metre and not exceeding 2 square metre each complete, all as specified and directed.
35 mm thick, factory made, 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed.
35mm thick, factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete, all as specified and directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with M.S. Square tube in opening as per specification & drawing, complete all as specified and as directed.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed.
Anodised aluminium door shutters with frame powder coating of any colour (Thickness or powder coating not less than 50 micron), aluminium section weighing 0.55 kg/m including with suitable locking arrangement with lock 4 lever, 5.5mm thick tinted glass, 5mm thick aluminium push plate, hydraulic door closer-01 No, pivot with standard floor spring and pivot on top frame, aluminium tower bolts 300 mm long-01 No, glazing clips, rubber packing for locking purpose with aluminium snap beading screws, handles 2 Nos in each door, hinges, etc. complete all as specified and as directed.
Powder coated (50 micron of approved colour) Aluminium anodised shutter window (glazed or wire gauge) fixed type with aluminium window frame or chowkat 1.50 mm thick sheet & section aluminium anodised of size 100 mm x 44.50 mm and window shutter frames made of (middle, top rail, bottom) and styles 1.5 mm thick aluminium anodised sheet & section of size 44.5 x 44.5 mm including all fittings such as rubber gasket aluminium glazing clips locking cabinet and 75 mm handle and including 4 mm thick tinted glass pane in panes glazed shutter fixed with rubber gasket and glazing clip/aluminium beads and with stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples on gauge shutter including all accessories complete all as specified and as directed.
Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wire mesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
5.5 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed.
Venetion blinds of approved make, vertical / horizontal type using 100mm wide fabric blinds of approved clour/shade and pattern including operating arrangment such as chord/ thread, counter weight, connecting chain etc., and necessary fittings, complete all as specified and directed.
Aluminium (Die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 68 kg complete all as specified and as directed.
150 mm aluminium handles, cast type anodised complete all as specified and directed. (ISI Mark)
150 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. (ISI Mark)
Mild steel cold rolled butt hinges (ISI Marked) 'Medium weight' 100 mm size, fixed to steel/angle iron frame by welding , if required complete all as specified and directed.
Rolled mild steel work of angle iron as in frames of doors & Cup Board etc conforming to grade Fe 290 grade E-165 in repairs complete all as specified and as directed.
Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete, all as specified. (ISI Mark)
Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples fixed in repairs, complete all as specified. (ISI Mark)
Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts 300 mm complete all as specified and as directed.
Kitchen cabinet/cupboard in required size at site made out 18 mm thick one side decorative lamination sheet consisting of carcass 18/20 mm thick PVC sheet & provn of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets 5.5 screws etc. the panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish, necessary drawer, openable shelve with frame work complete as per make and specification mention as per drawing with locking arrangement approved. Colour as approved by GE.
PVC molded steel catcher of superior quality complete all as specified and directed.
Hetich soft closer hinges of stainless steel premium quality complete all as specified.
Continuous (piano) hinges width of flaps 30 mm when opened, mild steel, bright finish or electrogalvanised complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified.
3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified.
4mm thick figured glass (frosted), pin head type and glazing with oil putty not exc 0.50 Sqm in each pane fixing to window/ventilator complete all as specified and as directed.
10 ltr capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with twin flush provision including 32mm dia PVC flush pipe, fixed in repairs, complete all as specified and as directed.
Sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mmx420mm bowl size 410mm x 330mm x 160mm, fixed in repairs complete all as specified.
15 mm bore steel water tubing medium grade galvanised with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete all as specified and as directed.
20 mm bore steel water tubing medium grade galvanised with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete all as specified and as directed.
Water closet (Orissa pattern) including lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe) fixed in repairs, complete all as specified and as directed.
Ball valves of size 20mm bore dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site, fixed in repairs complete all as specified and directed.
Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm, fixing in repair, complete all as specified and as direceted.
Angle valve of brass fancy type, chromium plated with long shank cast copper alloy screwed down high pressure with capstan head for iron pipe 15mm bore, fixed in repairs complete all as specified and as directed. Make : Jaquar Cat No FON-40053 or its equivalent in Hindware/Cera
PVC connections 15 mm size with PTMT nuts of length 600 mm and washers, fixed in repairs complete all as specified and as directed.
Single piece Water closet wall mounted pattern coloured of size : 370x695x795 mm as approved with connected accessories, fixed in repairs complete all as specified and directed. Make : Jaquar Cat No K US-WHT-35851S300UF or its equivalent in Hindware/Cera
WHB coloured 420mm x 420 mm x 155mm with connected accessories as approved and fixed in repairs, complete all as specified and directed. Make : Jaquar Cat No CNS-WHT-905 or its equivalent in Hindware/Cera
15mm bore centre hole basin mixer without Popup waste system with 450mm long braided PVC hoses, fixed in repairs, complete all as specified and as directed. Make : Jaquar Cat Part No CON-167KNB or equivalent of makes specified in PS.
15 mm bore wall mixer / sink mixer fixed in repairs complete all as specified and directed.
Brass Chromium plated over head shower rose of dia 125mm with swivel joint fixed to pipe or union of 15mm bore, fixed in repairs, complete all as specified and as directed.
Bib taps, fancy type, long body, cast copper alloy, chromium plated, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule for bore of pipe 15 mm, fixed in repairs complete all as specified and as directed. Make : Jaquar Cat Part No CON-037KN or equivalent in CERA/Hindware
Bib taps, fancy type cast copper alloy, chromium plated, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule for bore of pipe 15 mm, fixed in repairs, complete all as specified and as directed. Make : Jaquar Cat Part No CON-107KN and equivalent in Cera/Hindware.
Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe, fixed in repairs, complete all as specified and as directed. Make : CERACat Part No F8030103 or equivalent of makes specified in PS.
Toilet paper holder, fixed in repairs, complete all as specified and as directed. Make: Jaquar Cat Part No ACN-1153N or equivalent of makes specified in PS.
600mm long brass chromium plated towel rail D type, 20 mm dia, fixed in repairs complete all as specified and as directed. Make: Jaquar Cat Part No ACN-1111NM and equivalent in Cera/Hindware.
Soap dish fixed in repairs, complete all as specified and as directed. Make Jaquar Cat No ACN 1131N and equvalent in CERA/Hindware.
Towel rack, fixed in repairs, complete all as specified and as directed. Make : Jaquar Cat Part No ACN-1181FN or equivalent of makes specified in PS.
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level), complete all as specified and as directed.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, removing all type of vegetation (like peeple tree etc) scrubbing down with water complete, all as specified and as directed.
15 mm thick rendering on fair faces of brick or stone/concrete surfaces in cement mortar 1:4 and finished surface fair and even without using extra cement complete including on chajja, facia of the bldg upto G+2 storeyed bldgs with water proofing compound / MS Jallies with micro concreting and scaffolding as required all as specified.
10mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finish surfaces even and smooth without using extra cement, complete all as specified and as directed.
5mm thick rendering on brick or concrete surfaces as in ceiling in cement mortar 1:3, and finish the surface even and smooth without using extra cement, complete all as specified and as directed.
Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 10mm thick plastering in CM (1:3) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately). Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and provide modified polymeric five layred APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polyethylene film. Min wt of membrane will be 3.5 Kg/Sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitument 85/25 @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm & including two coats of bituminous Aluminium paint, complete all as specified and as directed by Engr-in- Charge. Note :- Water proofing treatment will be done by IWL/Asian Paints/Dr Fixit or through a specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour.
50mm thick Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed.
Granite stone 18-20mm thick (table rubbed and polished) in window cills, cooking platforms and the like not less than 1 Sqm (in one piece), laid over 15mm thick layer of cement mortar 1:3 after roughening of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including demolition of stone slabs and tiles of any description or thickness in floors etc. laid, bedded and pointed in any mortar complete all as specified and as directed.
Vitrified Dura stone tiles of size 300mm X 300mm X 10mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed.
Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab in floor including rubbing and polishing over & including screed bed or bedding layer 15mm thick in cement mortar (1:6) complete, all as specified and as directed.
Light shade double charged glossy finish vitrified tile 10 mm thick (Square / rectangular) polished , area of each tiles not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.
Light shade double charged vitrified tile 10 mm thick (Square / rectangular) polished, as in vertical surface/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.
Non skid, coloured, ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement to match, including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes , complete all as specified and as directed.
Glazed coloured ceramic jointfree/rectified tiles 450mm x 300mm x 7 to 8mm /600 mm x 300 mm x 7 to 8mm thick on vertical surfaces of walls as in dado/skirting etc., set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10 mm thick screed bedding/ backing layer in CM 1:3, complete all as specified and as directed.
Chequered cement concrete tiles (glossy finish premium quality) 300mm x 300mm x 40mm thick, set jointed and pointed in neat cement slurry in floor with grey cement and pigment over 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.
Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as direceted.
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and as direceted.
Solid PVC wall lining (wall panelling design and colour shall be approved by Engr in Charge) consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement & PVC framework/beading as required and fixing at site on PVC frame, fixed in repairs complete all as specified and directed.
4mm thick Cement fibre board (designer ceiling) of size 600mm x 600mm panel conforming to IS 14862 type B category three including GI frame work with size of grid 605mm 605mm including all accessories, the fibre sheet should be fire resistant, water resistant, termite resistant, environment friendly & 100% asbestos free, complete all as specified and as directed.
10-12mm thick perforated gypsum boards as in ceiling as approved, moisture resistant, including intermediate, perimeter channel wall channel, along with nuts and bolts connecting plates for gypsum boards, dry wall screws soffits cleats, panelling section, rowel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface, complete all as specified and as directed by Engr - in - Charge. Note: (a) Design of paneling board as approved by Engr-in-Charge (b) GI grid, hanging system shall be of same manufacturer.
Brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 including demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
Preparation of newly plastered or unplastered surfaces of wall and applying two coats of cement base paint, complete all as specified and as directed.
Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.
Preparation of old painted surfaces of wood or wood based materials of any description over 10cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces in multi storied bldgs, complete all as specified and as directed.
Preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer, complete all as specified and as directed.
Applying one coat of cement base paint on old external wall surface up to G+2 floor height, including preparation of surfaces complete all as specified and directed.
Preparation of old decorated wall / ceiling surfaces and applying one coat of wall care putty up to G+2 floor height complete all as specified and directed.
Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or gorged into spikes, framed guard bar, barred iron doors; ladder, framed balusters; railing; frame work for water tanks, cooler stand etc and similar work conforming to FE 290-0 or Gde-E-165, complete all as specified and as directed.
Rotational moulded polyethylene water storage tank, three layers, inner and outer white, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories {i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20/25mm (Minimum weight 210 gram) etc}, includinhg dismantling existing water tank, complete all as specified and as directed.
Rotational moulded polyethylene water storage tank, three layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm (Minimum weight 210 gram) etc), includinhg dismantling existing water tanks, complete all as specified and as directed .
10mm thick Toughened glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes and connecting all premium accessories like 18" SS handles, Locking arrangements etc as required complete all as specified and as directed.
Taking down carefully copper /aluminium, point wiring (light, fan, socket or power) complete including fittings and fixtures such as light fittings, switches, ceiling roses, pendants, regulators, sockets etc. and making good disturbed surfaces of wall, ceiling, floors etc to match the existing, complete all as specified and as directed.
Point wiring with 1.5 Sqmm PVC insulated, unsheathed (FRLS) cable with multi stranded copper conductor wiring in and including PVC concealed conduit (ISI marked) 20mm dia and over, medium grade and all accessories for one light / fan controlled by one switch suitable for pressed GI terminal boxes (modular type) of required modules concealed on walls including inner and outer cover plates for fixing of modular switches/socket/ regulator etc along with PVC insulated and unsheathed FRLS 1.5 Sqmm multistranded copper conductor earth wire connected to common earth and earth dolly, fixed in repair, complete all as specified & directed by Engr-in-Charge. Note: Modular metal flush boxes & inner and cover plates deemed to be included in quoted rate.
Description all as per item No 92 above but for 3/5 pin 6 Amp socket outlet on independent board .
Description all as per item No 92 above but for 3/5 pin 6 Amp socket outlet on the same board with other switch.
All as per description of Serial item No 92 here-in-before but one 3/5 pin 15 Amp socket outlet on independent board with PVC insulated, unsheathed FRLS cable 2.5 Sqmm copper multistrand conductor, along with PVC insulated and unsheathed FRLS 1.5 Sqmm multistrand copper conductor earth wire connected to common earth and earth dolly.
Switch piano, single pole, 1 module, one way, 6 Amp (modular type) with outer strip, 230 V, 50 Hz complete all as specified.
Switch piano, single pole, 1 module, one way, 16 Amp (modular type) with outer strip, 230 V, 50 Hz complete all as specified.
Socket outlet, 2 in 1- 3 pin combined, 6 Amp flush type modular type, 230 V, 50 Hz complete all as specified.
Socket outlet, 2 module, 2 in 1- 3 pin combined, 6 & 16 Amp flush type modular type, 230 V, 50 Hz complete all as specified and as directed.
Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Block, complete all as specified and as directed.
Bell (ding dong type), AC electronic type, 230 volts, single pole, 50 Hz complete all as specified and as directed.
Stepped type fan regulator 120W, 230V 50 C/S, 2 module, Deluxe Modular type electronic, hum free suitable control speed of fan from 0 to 100 %, complete all as specified and as directed.
Sub main wiring with two runs of 10 Sqmm (2x10 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor conforming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia medium grade (ISI marked) with all conduit accessories mounting on suface of walls /roofs / ceiling etc with one run of 6 Sqmm (1x6sqmm ) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire, including taking down old sub main wire, complete all as specified. Note:- 2 runs of 10 Sqmm (2x10sqmm ) ,one run of 6 Sqmm (1x6 sqmm ) cable and one metre of conduit will be measured as one unit.
Sub main wiring with two runs of 6 Sqmm ( 2x6 sqmm ) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor conforming to IS-694 drawn through and including non-metalic PVC rigid concealed conduit 25 mm dia medium grade (ISI marked) with all conduit accessories mounting on suface of walls /roofs / ceiling etc with one run of 6 Sqmm (1x6sqmm ) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire, including taking down old sub main wire, complete all as specified and directed Note:- 2 runs of 6 Sqmm (2x6sqmm ) ,one run of 6 Sqmm (1x6 sqmm ) cable and one metre of conduit will be measured as one unit.
Sub main wiring with two runs of 4 Sqmm ( 2x4 sqmm ) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor conforming to IS-694 drawn through and including non-metalic PVC rigid concealed conduit 25 mm dia medium grade (ISI marked) with all conduit accessories mounting on suface of walls /roofs / ceiling etc with one run of 4 Sqmm (1x4sqmm ) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire, including taking down old sub main wire, complete all as specified and directed. Note:- 2 runs of 4 Sqmm (2x4sqmm ) ,one run of 4 Sqmm (1x4 sqmm ) cable and one metre of conduit will be measured as one unit.
Sub main wiring with two runs of 2.5 Sqmm (2x2.5 sqmm ) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor conforming to IS-694 drawn through and including non-metalic PVC rigid concealed conduit 25 mm dia medium grade (ISI marked) with all conduit accessories mounting on suface of walls /roofs / ceiling etc with one run of 1.5Sqmm (1x1.5sqmm ) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire, including taking down old sub main wire, complete all as specified and directed. Note:- 2 runs of 2.5 Sqmm (2x2.5sqmm ) ,one run of 1.5 Sqmm (1x1.5 sqmm ) cable and one metre of conduit will be measured as one unit.
Sheet metal enclosures for DBs when MCCBs to be used double door DB VTPN 4 ways, vertical type, including 125 Amps MCCB, 16 kA, 415 volts with 400 Amps rated bus bar and neutral link including chases wall for fixing DB and making good disturbed wall surface to match with existing specifications, fixed in repairs complete all as specified and directed. (Including all PCC & cementing work for installation of TPN DB to wall).
Sheet metal enclosures for distribution board when MCB to be used TPN 4 way 415V with 400 Amps rated bus bar, double door type with MCCB as incommer and MCBs as outgoings with IP-43, IK-49 protection with appropraite size bus bar and neutral link fixed flush in wall including cutting chases in walls for fixing DB and making good disturbed wall surfaces to match the existing specifiactions ,incl taking down existing DBs, complete all as specified and as directed.
Sheet metal enclosures for distribution board when MCB to be used SPN 12 way with IP-43, IK-09 protection 240V with 200 Amps rated bus bar, double door type including cutting chases in walls for fixing DBs making good the distubed surfaces to match with existing specifications , fixed in repairs complete all as specified and as directed.
Sheet metal enclosures for distribution board when MCB to be used SPN 8 way with IP-43, IK-09 protection 240V with 200 Amps rated bus bar, double door type including taking down old making good the distubed surfaces to match with existing specifications, complete all as specified.
Sheet metal enclosures for distribution board when MCB to be used SPN 4 way with IP-43, IK-09 protection 240V with 200 Amps rated bus bar, double door type including taking down old making good the distubed surfaces to match with existing specifications, complete all as specified.
MCCB TPN, 125Amps, 415 Volts, rupturing capacity 16 KA including providing aluminuium thimbles for outgoing cable, complete all as specified and as directed by Engr-in-Charge.
MCB SPN, 40 Amps, 240 Volts, rupturing capacity 10 KA "C" Series including providing aluminuium thimbles for outgoing cable, fixed in repairs complete all as specified and as directed. Note : The exact capacity of MCB shall be as directed by Engr-in-Charge.
MCB SP, 10 to 40 Amps, 240 Volts, rupturing capacity 10 KA "C" Series including providing aluminuium thimbles for outgoing cable, fixed in repairs complete all as specified and as directed. Note : The exact capacity of MCB shall be as directed by Engr-in-Charge.
MCB SPN, 63 Amps, 240 Volts, rupturing capacity 10 KA "C" Series including providing aluminuium thimbles for outgoing cable, fixed in repairs complete all as specified and as directed by Engr-in-Charge. Note: Make of MCB and DB shall of same make for all connected items.
MCB TPN, 40 Amps, 415 Volts, rupturing capacity 10 KA "C" Series including providing aluminuium thimbles for outgoing cable, fixed in repairs complete all as specified and as directed.
MCB TPN, 63 Amps, 415 Volts, rupturing capacity 10 KA "C" Series including providing aluminuium thimbles for outgoing cable, fixed in repairs complete all as specified and as directed.
MCB TPN, 100 Amps, 415 Volts, rupturing capacity 10 KA "C" Series including providing aluminuium thimbles for outgoing cable, fixed in repairs complete all as specified and as directed.
Sheet metal enclosure single pole & neutral with 2 pin and earth plug and socket 20Amps, 240V complete with and including one single pole MCB of 20 Amps and breaking capacity 10KA, including taking down of old complete all as specified and as directed.
Switch piano, single pole, 1 module, one way, 6 Amp (modular type), 230V, 50 Hz AC, fixed in repairs complete all as specified and as directed.
Switch piano, single pole,1 module, one way ,16 Amp (modular type), 230V, 50 Hz AC, fixed in repairs complete all as specified and as directed.
Bell push Modular type, 1 module, 6 Amps 230 volts, fixed in repairs complete all as specified and as directed.
Socket outlet, 2 module, combined 3 pin, 6 Amp flush type modular type, fixed in repairs complete all as specified and as directed.
Socket outlet, 2 module, 2 in 1- 3 pin combined, 6 & 16 Amp flush type modular type, fixed in repairs complete all as specified and as directed.
Stepped type fan regulator 120W, 230V 50 C/S, 2 module, Deluxe Modular type electronic, hum free suitable control speed of fan from 0 to 100 %, fixed in repairs complete all as specified and as directed.
Switch piano type 5 Amps single pole one way 240 volts, fixed in repairs complete all as specified and as directed.
Switch piano type 15 Amps single pole one way 240 volts, fixed in repairs complete all as specified and as directed.
Switch piano flush type for bell push 5 Amps 230 volts, fixed in repairs complete all as specified.
Socket outlet, 2 in 1, 3/5 pin, 5 Amp flush type, 240V, 50 Hz AC, fixed in repairs complete all as specified.
Socket outlet, 2 in 1, 3/5 pin, 5/15 Amp flush type, 240V, 50 Hz AC, fixed in repairs complete all as specified.
Bell (ding dong type), AC electronic type, 230 volts, single pole, 50 Hz, fixed in repairs complete all as specified.
Switch socket combination, 2 in 1, 3/5 pin, 5/6 Amp flush type, 240V, 50 Hz AC, fixed in repairs complete all as specified.
Switch socket combination, 2 in 1, 3/5 pin, 5/6 & 15/16 Amp flush type, 240V, 50 Hz AC, fixed in repairs complete all as specified.
Socket outlet, 2 module, combined 3 pin, 6 Amp flush type modular type, fixed in repairs, complete all as specified and as directed.
Socket outlet, 2 module, 2 in 1- 3 pin combined, 6 & 16 Amp flush type modular type, fixed in repairs, complete all as specified and as directed.
LED bulb 5/12/20 Watt white/ warm white base2 cap B22/E27 light fitting 6500K/2700K (white/Yellow) with all necessary fixing arrangement, fixed in repairs complete all as specified and as directed.
LED lamp, 0.5 watt Safelite white/ warm white Yellow/Green/Red Base2 Cap B22 for engagement lights with all necessary fixing arrangment, fixed in repairs complete all as specified and directed.
Electronic LED panel driver / adoptor with universal connector for easy installations to light fittings suiable for15/18/24W, 230 Volt, AC fixed in repairs complete all as specified and directed.
PVC casing caping of size 25mm and 12mm including all accessories i.e Nail, tee, elbow etc., fixed in repairs complete all as specified and as directed.
Fan capacitor 2.5/3.15mfd AC, 230 volt, fixed in repairs complete all as specified and as directed.
LED light fitting 1x10W 230V, AC white / warm white decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, fixed in repairs complete all as specified and as directed.
LED light fitting 1x20W 230V, AC white/warm white decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, fixed in repairs complete all as specified and as directed.
New generation energy saving and environmental friendly long life LED street light of 30 watt with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment and impact resistance of IK07 with High efficiency long life LED with SMD LED on MCPCB Powered by Built-in, isolated electronic LED driver (SMPS based constant current supply) complete making connection and testing after fixing, complete all as specified and directed by Engr-in-charge. The specification of light fitting should meet the following : - (a) Housing of Light fitting : Aluminium Die Cast (b) Diffuser : High efficient LENS Optics (c) Operating Voltage : Between 140 V- 270V (d) Operating Temperature : -10 to +50 Degree Centigrade (e) Lumen efficacy : Not less than 100 lm/W (f) System Lumens : Not less than 2500 lm (g) Colour Temperature : Not less than 5700K (h) Surge Voltage Protection : Up to 4KV (j) Ingress protection : IP 65 (k) Total Harmonic Distortion (THD) : Not less than 20% (l) Power factor : Not less than 0.9 (m) Line protection : Under/Over voltage Protection (n) Input Frequancy : 50 Hz
Street light Bracket complete made of GI pipe 25mm bore, light grade of suitable size, 1.2m long bent to shape as per site requirement alongwith MS flat iron clamps with nuts, bolts, washers including grouting the same with wall, complete all as specified.
LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, fixed in repairs complete all as specified and as directed.
LED decorative down light fitting/ recess mounted round type white / warm white with high output diffuser, 8 watt 220 V AC with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size, fixed in repairs complete all as specified and as directed.
LED decorative light fitting round/ square type white / warm white with high output diffuser, 18 watt 220 V AC with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size, fixed in repairs complete all as specified and as directed.
LED decorative down light fitting/ recess mounted panel (2' x 2') surface mounted lighting fixture 36 Watt LED, with diffuser, isolated driver, CRI ≥ 70, PF ≥ 0.9, Surge protection upto 2.0 kV, shatter proof opal sheet of polycarbonate diffuser with system efficacy ≥ 100 Lm/watt, operating voltage 170-240 volts, colour temp 6500K, Low heat generating LED (Make of LED shall be Cree/Nichia/Osram) complete making all connections using 1.5 Sqmm copper conductor multi strand PVC insulated 2 core flexible cable from ceiling rose to fitting, fixed in repairs complete all as specified and as directed.
LED decorative, STYLO wall mounting, champagne gold finish fixture with plastic body suitable for 9W Led lamp B22 base with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size, fixed in repairs complete all as specified and as directed.
Metal Clad plug and socket for AC plug and geysers, fixed in repairs complete all as specified and as directed.
GI tubing light grade 40mm dia along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles, complete all as specified and as directed.
Switch socket combination, 3/5 pin, 5/6 Amp flush type, multipurpose with PVC box, 4 holes, fixed in repairs complete all as specified and as directed.
Switch socket combination, 6 pin, 15/16 Amp flush type, multipurpose with PVC box, 4 holes, fixed in repairs complete all as specified and as directed.
PVC insulated (unsheathed) 03 core multistranded cable copper conductor FRLS suitable upto 1.5 Sqmm suitable upto 1100volts in existing PVC concealed conduit pipe/ casing caping on wall, complete all as specified and as directed.
PVC insulated (unsheathed) 03 core multistranded cable copper conductor FRLS suitable upto 2.5 Sqmm suitable upto 1100volts in existing PVC concealed conduit pipe/ casing caping on wall, complete all as specified and as directed.
SINGH CONST CO
khajuria builders
KALSOTRA CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .