REPAIR TO PLUMBING JOINERY, ROOF TREATMENT, ATT, PLASTERING, TILING, SMART PERIODICALS AND MISC WORKS TO CERTAIN OTM, MD ACCN AND REPAIR TO INTERNAL WATER SUPPLY, PLUMBING WORKS, PVC WATER TANKS, CLEANING OF SERVICES TANKS AND OTHER CONNECTED REPAIR

Amount

Taking down shutters of any description not exceeding 1 sqm each complete all as specified and as directed

Taking down shutters of any description exc 1 sqm and not exceeding 2 sqm each complete all as specified and as directed

Taking down chowkats with shutter (without taking off shutter from the frame) exc. 1.5 sqm & not exceeding 4 sqm each complete all as specified and directed

S & F 35mm thick, 2nd class HW, plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile shall be as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed

S & F 35mm thick 2nd Class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube, fixing in opening as per specification given as per SSR Part-II section-8 complete all as per specified and directed

M&L for 40 mm thick flush shutters, solid core construction, with block board 3 core and plywood face panels, commercial type and laminate matt finish on both sides complete all as specified and directed.

S&F factory made solid panel PVC door shutter of 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all directed.

S&F butt hinges 100mm size stainless steel complete all specified

S&F butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 200mm long stainless steel ISI marked, barrel tower bolts of extruded section and fixed complete all as specified and as directed

S& F stainless steel ISI marked handles fabricated type anodised 150mm size complete all as specified and directed

S & F 300mm long stainless steel ISI marked, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast pr extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

M&L preparation of new surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying two coat of synthetic enamel paint,over one coat pink primer complete all as specified and directed

S&F stainless steel wire cloth of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified and directed

Dismantling of floor hearth and wall tiling including mortar bedding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for Non Skid ceramic joint free coloured tiles of 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed Make : Kajaria/ Orient Bell/ Johnson

M&L for glazed ceramic joint free coloured/printed tiles (colour & shade as approved by GE) of size 300mm x 450mm x 7-8mm thick in verticle surfaces as in skirting and dado set and jointing neat cement slurry, over & including 10mm thick rendering in cement mortar (1:4) and pointed, in white cement with pigment to match the colour of tiles complete all as specified and directed Make : Kajaria/ Orient Bell/ Johnson

Taking down cement plaster on brick walls etc including racking out joints, hacking for keys in scrubbing down and washing with water etc complete all as specified and directed

M&L for 15mm thcik rendering (mechanical means) on fair faces of brick work in cement mortar (1:6) finished even and smooth without using extra cement and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed Make : Berger Durrcem Extra/ Asian paints Decora/ Nerolac)

Supply only Integral water proofing compound as specified and directed.

M&L for 15mm thcik rendering on other than fair faces of brick work in cement mortar (1:4) including water proofing compound @3% by weight of cement, finished even and smooth without using extra cement applying two coats of oil bound distemper over a coat of primer on walls including preparation of new plastered surface complete all as specified and directed. Make : Asian paint tractor synthetic distemper/ Nerolac Beauty Smooth finish/ Berger Beauty Clean) (Note : WPC shall be measured & paid separetely under relevant item of Sch 'A' given as above)

M&L for preparation of old plastered surfaces of wall including cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds and efflorescent salt and trading and greasy spots and applying one coat of white wash (mechanical means) any tint complete all as specified and directed

Ditto all as per item No-23 here in before but one coat of white wash on ceiling surfaces complete all as specified and directed

M&L for preparation of old distempered surfaces of wall by washing rubbing down and stopping of old distempered surface of wall including cornices etc and 1mm thick of wall care putty as required for levelling and applying one coat of oil bound distemper (Oil emulsion any tint) complete all as specified and directed all by mechanical means. Make : Asian paint tractor synthetic distemper/ Nerolac Beauty Smooth finish/ Berger Beauty Clean)

M&L for preparation of old painted surface of wood or wood based material of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enemel paint complete all as specified and directed. Make: Asian paints Gattu/ Nerolac Hi-glass finish/ Berger Butterfly

M&L for preparation of old painted steel surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed Make: Asian paints Gattu/ Nerolac Hi-glass finish/ Berger Butterfly

M&L for Complete removal or existing treatment on wall/roof projections including facia cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean free from dust loose paint etc by skilled labour complete all as specified and directed.

Material & Labour for Old plastered surfaces of finishing walls with paint of required shade applying Two or more coats of 100% Premium acrylic emulsion paint of having VOC less than 50 gm/litre and UV resistace as per IS 15489:2004. Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm over Old surfaces complete all as specified and directed. Note: Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) complete all as specified and directed. Make: Asianpaint(Apex Ultima)/Berger(Weather coat long life)/Nerolac(Excel everlast)

M&L for anti termite treatment alongwith the external wall below concrete/Tiles or masonry apron using chemical emulsion @ 2.25 litrs per linear meter including drilling and lpugging holess etc, complete all as specified and directed.

M&L for anti termite treatment of soil under existing floors using chemical emulsion @ one litrs per hole, 300 mm apart including drilling and plugging holess 12mm dia holes with cement mortar (1:2) (1 cement : 2 coarse sand) to match the existing floors etc, complete all as specified and directed.

M&L for anti termite treatment at point of contact of wood work by using chemical emulsion (in oil or kerosene based solution) @ 0.50 litrs per hole, by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing plugging the same etc, complete all as specified and directed.

Cleaning of manholes of any size depth not exceeding 1.50m by taking out sludge and burrying the night soil in pits including excavation and earth work for pits by mechanical means complete all as specified and directed (mechanical means).

Cleaning by dewatering sludge water from septic tank/soak well through sewage suction truck/tanker by mechanical means of suitable capacity including removing all rubbish slushy water and disposed off out side MOD land as his own descreation of contractor complete all as specified and directed (mechanical means). (Note:- The size of tanker/truck and depth of sludge in the each load and truck No shall be entered in MB for arriving unit for payment purposes complete all as specified and directed.

Cleaning of sewage line 100mm dia including manholes by taking out all sludge/night soil burried in a pit to out side to distance not less than 100m and covering top of pit with earth layer 25mm thickness complete all as specified and directed.

Ditto all as per item No-35 above but for 150mm dia sewage pipe line complete all as specified and directed.

Removal of blockages from Indian type, European type WC, Nahani/floor/gully traps or between manholes complete by rodding and flushing with watering to obtain smooth flow of sewage complete all as specified and directed.

Removal of complete existing water proofing membrane of any description on roof ( including taking down plaster/Demolition of cement concrete if any) surfaces of any description and roughening surfaces of old concrete floor by picking sweeping cleaning and washing down with water to remove dust, foreign items etc complete all as specified and directed

M&L for high performance hybrid plyurea slastomeric waterproofing coating cold applied of spray/brush applied liquid membrance 1.5kg/sqm with an elongation of 600% and tensile strength of 12.6 n/sqmm as per ASTM D2370,crack bridging ability of 3.5mm as per ASTM C1305,shore a hardness of min 75 as per ASTM D2240. The system includes final base preparation as per site requirement,epoxy primer application and applying for water proofing treatment in two coats at a coverage of 1kg/sqm etc including repairing and cleaning the adjoining surface complete all as specified and directed.

M&L including T&P for petty repairs of Security/Perimeter/road lights in way that checking lights on the poles/bldgs and making functional the lights found unserviceable by checking proper electric supply, either by submain cable,LT Cable and connection cable fault, rectifying fault if any by excavating, taking out cable upto 5 metres either side of pole and returning & filling in includiing insertation for taking any exposed joints of connection cable and new fixing of light shifting of lights by deploying skilled electrician and helper with tools etc cycle or any other fast convence from 0900 hrs to 1800 hrs on working days or in any emercengy on holidays/Sunday complete all as specified and directed. Notes :- (i) All safety tools shall be provided to electrician. (ii) Electrician should be well qualified. (iii) Ladder/ convence minimum cycles shall be provided to employed person. (iv) NO android phone shall be permitted inside Technical area. However contractor provide normal mobile without camera phone to electrician for communication. (v) Defective street light should be deposited in store and if any lights handed over to electrician shall be installed at site. (vi) It complaints/checkings are not attended two consecutive days, recovery will be made @ 1000 per days. (vii) Daily scope of work shall include minimum one techinician & one helper. It may be more in emergengy , contractor adviced to quote rate accordingly.

Dismantling and taking down carefully defective/non fuctional street light fittings from its existing position and refixing the same after repairing/replacement with new of unserviceable spare parts including re-assembling and testing complete all as specified and directed. (Note : Spare parts/component of street light fitting shall be measured and paid separately under respective items as "Supply only") given here-in-after.

Supply only LED light driver any make suitable for LED Street light fitting of capacity 35 Watt to 45 watt complete all as specified and directed.

Supply only LED light driver any make suitable for LED Street light fitting of capacity 60 Watt to 90 watt complete all as specified and directed.

Supply only LED light driver any make suitable for LED Flood light fitting of capacity 50 watt complete all as specified and directed.

Supply only LED light driver any make suitable for LED Flood light fitting of capacity 120 watt complete all as specified and directed.

Taking up or down steel tubing and connections, 15mm bore and removing from site complete all as specified and directed.

Taking up or down steel tubing and connections, 20mm bore and removing from site complete all as specified and directed.

Supply and fixing 20 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete all as specified and directed.

Supply and fixing 25 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement,complete all as specified and directed.

S & F 500 Litre capacity white color rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed Make:- Sintex/Plasto/Vertex or equivalent.

S & F in repair 20 mm PTMT float valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and fixed, (minimum weight 455 gms) and flynut complete, screwed for Iron pipe etc all as specified and directed

S & F in repair gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 20mm dia complete all as specified and directed

S & F in repair sinks with drainage board made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed Make :- Nirali/Diamond/Nainco/Cera

S&F in repairs stainless steel kitchen plate rack thickness 2.00 mm wall mounted of overall minimum size (915mm X 455mm X 1220mm) deep, with partition for small/large plates etc made out of stainless steel grade 304, fixed with rawl plug and cp steel screws complete all as specified and directed Make :- Nirali/Diamond/Nainco/Cera

S & F in repair Vitreous china wash squatting pattern closet 'Orissa pattern' white, size 580 x 440mm with S or P trap, integral foot rests, with and including PVC low flushing cistern 10 litre capacity white with all fittings, fixtures including brackets and 32mm bore PVC flush pipe complete all as specified and directed Make :- Jaquar/Kohler/Grohe/ Diamond/ Cera

S & F vitreous China wash basin white (flat back or angle back ) type of size 550mmx400 mm including brackets,brass cromium plated waste fittings and pvc wast pipe including cutting for and pinning in ends of bracket fixed in repairs complete all as specified and directed. Make :- Jaquar/Kohler/Grohe

S&F in repair stainless steel Shop dish with PU foam complete all as specified. Make:- Essco, Cat No:- AEC-1131 or equivalent in kohler/ Grohe/ Jaquar as approved by GE in writtten.

S & F in repair of CP bib tap long shank pattern with flange/cap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipes 15mm bore complete all as specified and directed. Make:- Kohler/ Grohe/ Jaquar

S & F in repair CP pillar tap cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure fancy type with long shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed Make:- Kohler/ Grohe/ Jaquar

S & F in repair CP stop cock /angle cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes 15mm bore complete all as specified and directed. Make:- Kohler/ Grohe/ Jaquar

S&F in repair Brass CP mixer 15 mm bore dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make:- Kohler/ Grohe/ Jaquar

S & F in repair PVC connections, 450mm long with brass CP / PTMT nuts suitable for connecting 15mm bore pipes, superior quality complete all as specified and directed.

S & F for brass chromium plated shower rose 200-300 mm size with swivel joints,and connecting rod including fixing to steel pipe or union complete all as specified and directed. Make:- Kohler/ Grohe/ Jaquar

S & F repair tubular towel rail, brass chromium plated 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed at site complete all as specified and directed Make:- Kohler/ Grohe/ Jaquar

Supply only sheet glass shelf assembley consisting of 5.5 mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long complete all as specified and directed Make:- Kohler/ Grohe/ Jaquar

M&L for non skid/anti skid vetrified (coloured) jointless tiles (square or rectangular) area of each tile exceeding 0.42 sqm but n.exc 1.00 sqm and 9-10 mm thick, as in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15mm thick screed in CM (1:6) over and including 25 mm thick sub base of floor in PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate complete all as specified and directed. Make:- Orient bell/ Kajaria/ Johnson

All as per item No-67 above but on vertical surfaces over and including 10mm thick rendering in CM (1:4) complete all as specified and directed. Make:- Orient bell/ Kajaria/ Johnson

M&L for seven stage cleaning and sterilization of inside the RCC/ PVC water storage tank of capacity not exceeding 500 Ltr of any description and in any position comprising following cleaning and sterilization of water tanks through bacteriological treatment by using TERBAC G5/Inchor-5/NB-10/ TERBAC-G-65/ Inoxi-60/NB-69 AND ULTRA VIOLET RAY. Make: rays Cleantech/ Inus watertech/ satya enterprise. Location: SAA seven stages are as under plants:- (a). First Stage is to drain out the water by using exit valve or high capacity dewatering system. (b). Second stage is cleaning all the algae formation inside the tank by using TERBAC G10/ Inoxi-60/NB-69 a laboratory tested branded chemical of the company ans scrubbing the walls of the tanks. (c). Third strage is fresh water cleaning by high speed jet pump. (d). Fourth stage and first bacteria screening is decertification by using TERBAC-G5/ Inohor-5/NB-10 a Govt Laboratory certified brannded halogen compound. (e). Fifth stage is cleaning the floor of water tank by industrial vaccum cleaner. (f) . Sixth stage is the second bacterio screening and sterilizing method by using ultra violet ray within the tnk and kills all suspended bacteria. (g) Seventh stage of cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified, branded strong oxidizing agent TERBAC-G65/Inoxi-60/NB-69 . NOTE:-(i) COMPANY WILL SUBMIT GOVERNMENT LABORATORY TEST CERTIFICATE OF TERBAC-G5/INCHOR-5/NB-10, TERBAC-G65/ INOXIi-60/NB-69, BEFORE CLEANING, FIX THE STICKER MENTIONING THE DATE OF CLEANING & NAME OF SITE AND ALSO PROVIDE CERTIFICATE CONFIRMING THE COMPLETION OF STERILIZATION OF WATER TANKS MENTIONING THE NAME OF STATION AND DATE OF CLEANING. ALL THE CLEANING & STERILIZATION STAFFS SHOULD BE UNDER ACCIDENTAL INSURANCE COVERAGE) (ii) OUTLET PIPE OF OHT SHOULD BE PLUGGED BEFORE CLEANING THE OHT TO AVOID.ENTERING SCALS AND THE SAME SHELL BE RECONNECTED AFTER CLEANING THE OHT AND THE QUOTED RATE IS DEEMED TO INCLUDE FOR THE ROVISION . (III) STERILIZATION TEAM WILL BE COMPRISED OF AT LEAST 30% MEMBERS WHO ARE MINIMUM 03 MONTS CERTIFICATE HOLDER IN WATER TANKS STERILIZATION. (IV) CONTRACTOR WILL BE RESPONSIBLE FOR RECTIFICATION OF COMPLAINTS OCCURRED DURING CLEANING THE TANK IE. NO WATER IN TANK/OVER FLOW DUE TO BROKEN OF FLOAT VALVE/ BLOCKAGE TO BE INCLUDED IN QUOTED RATE. NOTE:-THE WORK SHALL BE CARRIED THROUGH SPECILIZED AGENCY RAYS CLEANTECH/ INUS WATERTECH/ SATYA ENTERPRISE.

Ditto all as per ser item No 69 above but for of inside the RCC/ PVC water storage tank of capacity not exceeding 1000 Ltr through bacteriological treatment by using TERBAC G5/Inchor-5/NB-10/ TERBAC-G-65/ Inoxi-60/NB-69 AND ULTRA VIOLET RAY. Make: RAYS CLEANTECH/ INUS WATERTECH/ SATYA ENTERPRISE.

Taking down caefully switch board complete along with old MS rectangular sunk type box heavy/medium duty of size 1 to 12 module from the existing position along with switches sockets regulators etc by unscrewing from board by disconnecting electric connections without damaging existing circuit and conduit complete and reconnecting all connection after comletion of job with making good the disturbed surface to match the existing one all as specified and directed.

M&L for modular metal flush boxes and white cover plate with frame of size 6/8 module for mounting modular type switches /socket/fan/ regulator etc. Make- Goldmedal/Cabtree(Havells)/L&T

M&L for modular metal flush boxes and white cover plate with frame of size 4 module for mounting modular type switches /socket/fan/ regulator etc Make- Goldmedal/Cabtree(Havells)/L&T

M&L for modular metal flush boxes and white cover plate with frame of size 3 module for mounting modular type switches /socket/fan/ regulator etc .Make- Goldmedal/Cabtree(Havells)/L&T

M&L for modular metal flush boxes and white cover plate with frame of size 1/2 module for mounting modular type switches /socket/fan/ regulator etc Make- Goldmedal/Cabtree(Havells)/L&T

S&F switch modular type 1 module single pole, one way 5 Amps. Make- Goldmedal/Cabtree(Havells)/L&T

S&F switch modular type 1 module single pole, one way 15 Amps. Make- Goldmedal/Cabtree(Havells)/L&T

S&F socket outlet 2 in 1, 5 pin, 15 Amps modular type 2 module .Make- Goldmedal/Cabtree(Havells)/L&T

S&F socket outlet 5 Amps modular type 2 module. Make-Goldmedal/Cabtree(Havells)/L&T

S&F in repair Bell push 5 Amps Make-Goldmedal/Cabtree(Havells)/L&T

S&F in repair 5 Amps 2 way modular switch Make-Goldmedal/Cabtree(Havells)/L&T

M&L ceiling rose,PVC/polycarbonate, isolated body

S&F stepped type electronic fan regulator modular type 1 module Make-Goldmedal/Cabtree(Havells)/L&T

S&F bell, ding dong type AC, 230 Volt, single pole.

Supply and fixing ceiling fan complete with blade down rod and accessories 230 V,1400 mm sweep air delivery 245 cfm complete with brusheless direct current motors all s specified and directed Make-Havells/Philips/Bajaj

Supply & fix exhaust fan made of sturdy engineering plastic complete with louvers shutter volt 230 V 50 Hz RPM 1200 copper winding of sweep 200 mm. Make - Havells/Philips/Bajaj

H C CONSTRUCTION (BID ID -3279404)

Yaduvanshi Traders (BID ID -3281295)