PROVN OF SHED AT MT AREA AT 1 AFSR PALAM UNDER GE (AF) PALAM, DELHI CANTT - 10

Amount

Excavation in trenches n exc 1.5m in depth and 1.5m in width and getting out in soft/loose soil complete all as specified and as directed.

Surface dressing n.exc 15cm deep and getting out in soft /loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and as directed.

Removing excavated material (soil) n .exc 50m and deposited where directed at a level n exc. 1.5m above the strating point complete all as specified and as directed.

Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface complete all as specified and as directed.

M&L for providing cement concrete (1:4:8) type D2 (using 40mm graded stone aggregates) as in foundation, mass concrete and filling complete all as specified and as directed.

M&L for cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in anchorage blocks for hold fast, post and struts complete all as specified and as directed.

M&L for broken stone or boulders hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specified and as directed.

M&L for 75 mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base to floors complete all as specified and as directed.

M&L for 75mm thick PCC (1:2:4), type B2, (using 40mm graded stone aggregates) as in floor including use of necessary use and waste of form work complete all as specified and as directed.

S&F for mild steel work (FE 290Grade E-165) roof trusses(framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed.

M&L for mild steel works (Fe-290 Grade E-165) as in posts and struts etc in fencing of angle or other sections, including cutting tops to shape as directed, drilling holes, notching for wire etc, complete all as specified and as directed.

S&F MS steel work in tubular trusses and tubular posts including special shaped washers etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 complete all as specified and as directed.

S&F plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

S&F PPGI pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to fix the wall fixed with self taping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Material & labour for brick work with sub class B old size burnt bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4), to be finished even and fair with water proofing compound by weight as per manufacturer's instructions including necessary scaffolding complete all as specified and as directed. Note:- WPC shall be measured and paid separately.

M& L for preparation of new plaster surface of walls, chajjas, soffits & beam including necessary scaffolding and applying two coats of cement base paint over one coat of chalk whiting primer complete all as specified and as directed.

S& F for machine pressed precast concrete interlocking paver block any shape and size, with grey cement and pigment to match, confirming to IS 15658-2006 of 60mm thick M-35 grade laid over 50 mm thick sand cushioning complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M/S KAPIL ENTERPRISES (BID ID -3204598)

ETERNITY PROJECT (BID ID -3209146)

Gaurav India Corporations (BID ID -3207895)

Shri Kanchan Engineers (BID ID -3205679)

GLOBAL DEVELOPERS COMPANY (BID ID -3206947)

M.B ENTERPRISES (BID ID -3208544)

HANUMAN BUILDERS (BID ID -3208659)

krishna construction co. (BID ID -3206056)

M/S Parshant Associates (BID ID -3208533)

Shiv Shankar Nirman Co. (BID ID -3208656)