WELCOME MAINTENANCE OF OFFICERS MARRIED ACCN IN AOR OF AGE B/R I AND REPAIR/MAINTENANCE OF FIRE FIGHTING SYSTEMS AND SWTS AND CONNECTED ITEMS AT VARIOUS LOCATIONS UNDER GE NARANGI

Amount

Dismantling of plain or corrugated steel sheeting, any gauge or any thickness in roof covering complete all as specified and as directed.

Material and labour Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and as directed.

Material and labour Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick (Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and as directed. Note: To be executed for provision of ridges and hips.

Supply and fix in repairs, suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 32 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and directed.

Supply and fix in repairs, suspended 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) only as per direction of engineer in charge complete all as specified and directed.

Demolition of brick or stone masonry work built in cement mortar as in wall including all quoins, arches, pillars etc complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brick work with sub class "B" bricks, straight or curved on plan exc to any radius in half brick thick walls built in built in CM 1:4 complete all as specifed and directed

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for 75 mm thick, PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with sealing compound grade 'A' etc complete all as specified and as direted.

Material and labour for 100mm thick PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in path/paving/hard standing and finishing the surfaces even and smooth without using exra cement complete all as specified and as direted.

Material and labour for 50 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregated) as in padding of roof top finishing even and smooth without using extra cement to ascertain the proper slope with using WPC as per manufacturer instruction complete all as specified and as directed.

Material and labour for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top: (i) Taking out old roof tratment and roughening tha same old concrete slab by picking, sweepingc clean and washing down with water to remove dust etc (ii) Screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying as in roof slab with mixing of WPC and surface finished fare and smooth without using extra cement (WPC shall be measured and paid seperately) (iii) Cleaning the plastered roof surface and applying one coat of cold bituminuous primer @ 0.25 ltr/Sqm confirming ti IS: 3384 -1986 (iv) APP based polymeric menbrane 3mm thick (minimum) weighing 3.5 kg/Sqm reinfiorced with polyster non woven fabric (weighing not less than 160gms/Sqm) shall be less appliedb over bituminous primer as specified above over a application of polymeric membrane shall by torch application. The overlaps shall be minimum 100mm on the teransverese direction and 75mm on longitudinal direction. (v) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm.

Material and labour for cutting and uprooting vegetation growth/plants of any size on roof surface or chajja including muds and disposal the same to a distance n.exe. 50 m and cleaning the site complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Material and labour for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St.-240 complete all as specified and as directed.

Material and labour for mild steel flat iron hold fasts fixed to chowkats confirming to Fe-290 Gde-E-165 etc, complete all as specified and as directed.

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for preparation of newly plastered surface of wall and applying two coats of acrylic distemper over a coat of primer including applying Birla white/JK White cement putty 1 mm thick complete all as specified and as directed.

Material and labour for rendering 5mm thick in cement mortar 1:3 on fair faces of brick/concrete surfces as in ceiling finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for preparation of newly plastered surface of ceiling and applying three coats of white wash including preparation complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of wall and applying one coat of acrylic distemper complete all as specified and as directed.

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down including applying a layer 1 mm wall care (putty) for making the surface even & smooth and applying two coats of acrylic distemper over a coat of alkali resistant primer including necessary cleaning splashes of paints from window panes and floor etc complete all as specified.

Material and labour for preparation of old painted surfaces of wood or wood based materials of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paints complete all as specified and as directed.

Material and labour for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

Material and labour for coloured non skid cermic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material and labour for glazed vitrified tiles (GVT) light shade 9 to 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and labour for glazed vitrified tiles (GVT) , light shade, 9 to 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in skriting dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Material and labour for glazed light coloured/printed ceramic tiles 450x300x7mm thick in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed.

Material and labour for 12mm to 14mm thick green marble slab for kitchen plat form / shelf and vertical faces duly machine polished full round on external/projected surface over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and as directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed.

Taking down Shutters of any description n exc 1 sq. m each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm including builders hardware each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.

Supply and fix 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed

Supply and fix 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (with sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed.

Supply and fix 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.divided into squares, with plain,chamfered or rounded,mitred and rebated sash bars,any numbers, edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified.

Supply and fix 30 mm thcik Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Supply and fix solid pre lam PVC door frame/CHOWKHAT of size 100mm x 45mm made out of 5mm PRELAM PVC sheet reinforced with M.S. square tube 15mm x 15mm. The two vertical door profiles are to be reinforced with 40mm x 20mm MS tube 19 guage. Door frame need to be fixed to wall using 100 mm long MS screws etc complete.

Supply and fix factory made solid panel pre lam PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes 19 guage thickness and size of 40mm x 20 mm for stiles, top,bottom and lock rails. M.S. frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 30mm width stuck inside with solvent cement. 110 mm width forming stiles in which 100mmm should be flat and 5 mm should be tapered, and 5 mm thich, 135 mm wide prelam pvc sheet for top and bottom rail in wchich 125 should be flat and 5 mm should be tapered on either side of panel, also for lock rail 145 mm sheet, 125 should be flat and 5 mm tapered on either side. And additional 5 mm thich pvc strip struck inside of C channel. and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete

Material and labour for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

Supply and fix Pressed steel frames for doors of size 125mmx60mmx1.25mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed

Supply and fix Pressed steel frames for doors of size 105mmx60mmx1.25mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed

Supply and fix box type steel windows with side hung shutters both mosquito proof and glazed shutter including projecting type hinges with steel handle and steel peg stay with glazing bars and 12 mm square bar or ground bar of approved design welded to steel window frame dovetailed or welded complete all as specified and as directed.

Supply and fix steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

Material and labour for Plain cement concrete (1:3:6) type C0 (using 12.5mm graded crushed stone aggregate) as in back filling in pressed steel door and window frame, fixing of holdfast etc complete all as specified and as directed.

Supply and fix Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30 mm width of flap when open fixed to wooden frame or shutter any type with screw complete all as specified an directed.

Supply and fix 100 mm size stainless steel butt hinges, complete all as specified and as directed.

Supply and fix 75 mm size stainless steel butt hinges, complete all as specified and as directed.

Supply and fix 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 100 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed

Supply and fix 100 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed

Supply and fix 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

Material and labour for 100 mm long Hasp and staple, safety type, aluminium anodised with MS hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fix powder coated three track aluminium sliding window with approved make of following extruded section of anodised glazed shutter as per Standard Engineering practices including all other accessories complete including 4.00 mm thick tinted glass panes, rubber beading, mosquito proofing, locking system etc. complete all as specified and as directed. (Refer Jindal Cat M-2014 ) Aluminium sections : 'A' series (i) Shutter bottom & top :- 37.50 x 15 x 1.3 mm thick (20690) (ii) Shutter interlock :- 37.50 x 23 x 1.3 mm thick (20689) (iii) Shutter side (Handle) :- 37.50 x 23 x 1.3 mm thick (20689) (iv) Frame bottom :- 75 x 26 x 1 mm thick (20671) (v) Frame top and sides :- 75 x 26 x 1 mm thick (20672)

Supply and fix framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290, Gde-E-165 completed all as specified and directed.

Supply and fix in repairs prelaminated particle board 18/19mm, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws and magnet catcher to timber frame work complete all as specified and as directed.

Supply and fix stain less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples complete all as specified and as directed.

Supply and fix in repairs Statinless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.

Supply and fix in repairs, floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm, anodized with hard drawn steel spring, fixed in floors complete all as specified and as directed.

Supply and fix aluminium door seal fixed to door shutter with screws complete all as specified and as directed.

Supply and fix in repairs 25 mm dia stainless steel tublar curtain rods minimum 0.5 mm thick including fancy type with fixing brackets, stops, rollers etc. complete all as specified and as directed.

Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix 4mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

Material and labour for preparation of newly prepared steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

Taking up or down steel water tubing 15 mm bore from trenches/wall,ceiling or floors including all fittings complete all as specified and as directed.

Supply and fix GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Fixing only old serviceable GI tubing 15 mm bore, with and including new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Taking up or down steel water tubing 20 mm bore from trenches/wall,ceiling or floors including all fittings complete all as specified and as directed.

Supply and fix GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Fixing only old serviceable GI tubing 20 mm bore, with and including new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc n. exc. 10 cm width or girth complete all as specified and as directed.

Supply and fix in repairs bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix in repair 2 way Bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix in repairs chromium plated wall mixer three in one system for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair chromium plated centre hole wash basin mixer complete all as specified and as directed.

Supply and fix in repairs chromium plated sink mixer two in one system for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repairs 15 mm bore pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repairs concealed stop cock with sheet flange cast copper alloy, screwed down high pressure, with round operating knob for 15 mm bore pipe or for unions complete all as specified and as directed.

Supply and fix in repairs stop valves/angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed.

Supply and fix in repair stop valves or two way angle cocks, cast copper alloy concealed type reduced Body with Adjustable Wall Flange screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule.

Supply and fix in repairs Gun metal gate valve with iron wheel head screwed both ends for GI pipe 15mm bore complete all as specified and as directed.

Supply and fix in repairs Gun metal gate valve with iron wheel head screwed both ends for GI pipe 20mm bore complete all as specified and as directed.

Supply and fix as in repairs, brass chromium plated tubular towel rail 20 mm dia 60 cm long including brackets complete all as specified and as directed.

Supply and fix in repairs towel ring brass chromium plated complete all as specified and as directed.

Supply and fix in repairs chromium plated swivel shower rose of size 150x150mm square type with accessories complete all as specified and as directed.

Supply and fix in repairs chromium plated soap dish fixed to walls with brass screws complete all as specified and as directed.

Supply and fix in repairs of chromium plated Health faucet with 15 mm bore 1mitre long tube acrylic type complete all as specified and as directed.

Supply and fix in repair glass shelf of size 450mmX150mm with chromium plated guard rail below mirror for keeping soap box complete all as specified and as directed.

Supply and fix in repairs corner glass shelf of size 300 mm with chromium plated bracket guard and railing, complete all as specified and as directed.

Supply and fix in repairs toilet paper holder chromium plated fixed to wall with chromium plated Brass screw complete all as specified and as directed.

Supply and fix in repairs PVC connection pipe 15mm bore and 450mm long with PVC PTMT nuts at each ends with rubber washers complete all as specified and directed.

Supply and fix in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 940mm x 460mm bowl size 405mm x 354mm x 229mm complete all as specified and as directed.

Supply and fix in repairs sink stainless steel 1mm thick made in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 510mm x 430mm bowl size 430mm x 380mm x 203mm complete all as specified and as directed.

Supply and fix in repairs stainless steel 0.85 mm thick kitchen rack size 914mmX914mmX254mm complete all as specified and as directed.

Supply and fix in repairs, 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.

Supply and fix in repairs, 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.

Supply and fix vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap 15 mm bore chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,PVC connection pipe complete all as specified and as directed

Supply and fix in repairs 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

Supply and fix in repairs Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.

Supply and fix in repairs Plastic water closet seat cover, black or white, closed pattern with flat bottom, and cover including mild steel chromium plated or aluminised hinging device complete all as specified and as directed

Supply and fix in repairs chromium plated waste coupling 32mm (half or full thread) complete all as specified and as directed.

Supply and fix in repairs 32mm dia PVC waste pipe complete all as specified and as directed.

Supply and fix in repairs stainless steel Grating doom 100mm dia complete all as specified and as directed.

Supply and fix in repairs stainless Steel Grating doom 125mm dia of complete all as specified and as directed.

Supply and fix in repairs Stainless Steel Grating doom, 125mm dia with waste hole complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Material and labour for Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Casing and Caping with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as directed..

All as per item No 119 here-in-before but One light point controlled by 2- two way 5 Amps switch

All as per item No 119 here-in-before but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables complete all as directed.

All as per item No 119 here-in-before but for One 3 pin 5 Amp switch socket outlet on independent board

All as per item serial No119 here-in-before but for One 3 pin 5 Amp socket outlet on same board with other switches.

All as per item No 119 here-in-before but wiring with 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly.

Material and labour Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Conduit conclead with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as directed..

All as per item No 125 here-in-before but One light point controlled by 2- two way 5 Amps switch

All as per item No 125 here-in-before but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables complete all as directed.

All as per item No 125 here-in-before but for One 3 pin 5 Amp switch socket outlet on independent board

All as per item serial No 125 here-in-before but for One 3 pin 5 Amp socket outlet on same board with other switches.

All as per item No 125 here-in-before but wiring with 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly.

Supply and fix modular switch 1 way 6 amp, 1 module complete all as specified and as directed

Supply and fix modular switch 1 way 16 amp, 1 module complete all as specified and as directed

Supply and fix modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed

Supply and fix modular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and as directed

Supply and fix modular Bell push 6A, 1 module complete all as specified and as directed

Supply and fix modular fan regulator,120 W, 2 module complete all as specified and as directed

Supply and fix switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and as directed

Supply and fix in repair switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and as directed

Supply and fix in repair switch piano, flush type single pole one way 15 Amps 230 volt complete all as specified and as directed

Supply and fix switch piano, flush type single pole two way 5 Amps 230 volt complete all as specified and as directed

Supply and fix Bell push switch, flush type, 5 Amps 230 volt complete all as specified and as directed

Supply and fix in repair Bell push switch, flush type, 5 Amps 230 volt complete all as specified and as directed

Supply and fix socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as specified and as directed

Supply and fix in repair socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as specified and as directed

Supply and fix switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as specified and as directed

Supply and fix in repair switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as specified and as directed

Supply and fix switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as specified and as directed

Supply and fix in repair switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as specified and as directed

Supply and fix in repair socket outlet multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as specified and as directed

Supply and fix lamp holder insulated PVC/ Polycarbonate/ bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as specified and as directed

Supply and fix in repair lamp holder insulated PVC/ Polycarbonate/ bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as specified and as directed

Supply and fix stepped type electronic fan regulator, two module size, flush type complete all as specified and as directed

Supply and fix in repair stepped type electronic fan regulator, two module size, flush type complete all as specified and as directed

Supply and fix ceiling rose surface bakelite 65x50mm three terminal complete all as specified and as directed

Supply and fix in repair ceiling rose surface bakelite 65x50mm three terminal complete all as specified and as directed

Supply and fix call bell Ding Dong AC. 230 volts,single pole complete all as specified and as directed

Supply and fix in repair call bell Ding Dong AC. 230 volts,single pole complete all as specified and as directed

Supply and fix modular white cover plate with frame, 1 module complete all as specified and as directed

Supply and fix modular white cover plate with frame, 3 module complete all as specified and as directed

Supply and fix modular white cover plate with frame, 4 module complete all as specified and as directed

Supply and fix modular white cover plate with frame, 6 module complete all as specified and as directed

Supply and fix metal flush box 3 module complete all as specified and as directed

Supply and fix metal flush box 4 module complete all as specified and as directed

Supply and fix metal flush box 6 module complete all as specified and as directed

Taking out existing unserviceable switch board plates any type, dismantling switches carefully, stacking at site for use of serviceable switches and supply and fixing new 3mm thick masonite laminated sheet top cover fixed on 6 inch x 10 inch MS box with brass screw for mounting switches, sockets, regulator etc including making necessary electrical connection with 1.5 sqmm single core copper mulitstranded cable complete all as specified and as directed (Note : New Switches, sockets, fan regulators etc if required will be measured and paid separately under relevant items).

All as per item serial No 165 here-in-above but new 3mm thick masonite laminated sheet top cover white fixed on 4 inch x 8 inch MS box complete all as specified and as directed

Taking down carefully by unscrewing from boards/outlet boxes,fittings and fixtures such as switches, sockets,ceiling roses,lamp holders,brackets,ceiling fitting ,bulkhead fitting,tubelight fitting and regulators etc for reuse at site or carring to the store ( To be measured only when found serviceable in all respect complete for reuse) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed

Supply and fix in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

upply and fix in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed

Supply and fix in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed

Supply and fix in repair wall decorative fixtures in durable body and designer mesh in gold finish suitable for 9W LED lamp of B22, including lamp of 9watt complete all as specified and as directed

Supply and fix in repair/replacement LED 60 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and directed.

Disconnecting the main power supply to distribution box and make a proper dressing of SPN/TPN/VTPN MCB/MCCB DBs of pre-connected MCBs by changing screw of DB cover ,earth wire and other necessary connecting items and dressing of wires with the help of cable tie inside the distribution box after completion supply power complete all as specified and directed.

Supply & fix in repair/replacement MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate.

Supply fix in repair/replacement MCB DB of sheet metal enclosure double door IP -43 SPN 8 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate all as directed.

Supply fix in repair/replacement MCB DB of sheet metal enclosure double door IP -43 SPN 4 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate all as directed.

Supply and fix in repair/replacement MCCB four pole 100A, Icu 16KA, thermal magnetic, 415v AC complete all as specified and as directed.

Supply and fix in repair/replacement MCBs, SPN upto 40 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule)

Supply and fix in repair/replacement MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule)

Dressing of pre-wired casing caping/PVC conduit by changing Casing caping /PVC conduit and necessary connecting items (such as flexiable conduit ,screws etc) complete all as specified and directed.

Material and labour for Sub main wiring with 2 runs of 6.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit.

Material and labour for Sub main wiring with 2 runs of 4.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit.

Material and labour for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m deep below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth lead wire 4 mm dia or 8 SWG bolted (with GI nuts, bolts & check nuts) and earth plate electrode at one end and connected to main switch board/ DBs etc. at the other, earth strip encased(protected) in and including 15 mm bore GI pipe medium grade with all fittings from top of electrode to main switch board/ DBs etc fixed with and including 25 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-2 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work complete all as specified and shown in electrical plate No 3 of SSR Pt-I.

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and directed.

Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.

Excavation the surface across the metal road by cutting road surface/by digging trench less tunnel for passing pipe of size up to 600 x 700 mm including making good the existing surface with proper PCC 1:2:4 type B-1 and applying two coats of black paint suitable for concrete surfaces complete all as specified and as directed.

Taking up / down the 100mm size CI/DI water mains and connections/fittings of any type from trenches/ walls / floors (of any location) for replacement / re-use in old / new location/diversion by burning lead joints/ tyton joint/rubber gasket joint or kept aside for further disposal complete all as specified and directed by the Engr-in-Charge. (Note: Necessary earthwork, if any , will be measured and paid separately under relevant items) .

Supply, laying & testing 100 mm dia ductile iron pressure pipe socket and spigot end, class K-7, confirming to IS-8329/2000 blast furnace slag cement with portland cement properties suitable for push-on - joint with inside cement mortar lining, internal metallic zinc coating and external black bitumen coating duly ISI marked laid in trenches including making good disturbed surfaces of road /pavement/PCC surface as required complete all as specified and as directed.

Materials and labour for run Lead joints suitable for 150 mm bore cast iron spigot and socket end pipes and fittings including dismantling of old worn out joint by burning out old lead etc and testing complete all as specified and as directed.(Note:- Cost of excavation, returning, removal shall deemed to be included in the unit rate quoted).

Materials and labour for run Lead joints suitable for 100 mm bore cast iron spigot and socket end pipes and fittings including dismantling of old worn out joint by burning out old lead etc and testing complete all as specified and as directed.(Note:- Cost of excavation, returning, removal shall deemed to be included in the unit rate quoted).

Supply and fix in repair for CI/DI fittings for spigot and socket pipes/ flanged pipe of size upto 150 mm bore such as bends(any type,radius and angle) tapers any type (straight, bend, increasing,decreasing or double socket etc) Tee pieces single branch, 'Y' junction ,double branch, cross(all sockets or socket and spigot) collars caps and plugs complete all as specified and directed.

Material and labour for PCC1:3:6 type C-2, ( using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete including dismantling of existing concrete complete all as specified and directed.

Supply and fixing in repair 80 mm bore CI sluice valve of Class PN-1.6, long body type, heavy duty, ISI marked (IS 1538) flanged end with iron wheel and stainless steel spindle including rubber gasket joints, nuts, bolts etc including testing complete all as specified and directed.

`Supply and fixing in repair 100 mm bore CI sluice valve of Class PN-1.6, long body type, heavy duty, ISI marked (IS 1538) flanged end with iron wheel and stainless steel spindle including rubber gasket joints, nuts, bolts etc including testing complete all as specified and directed.

Taking down old UNSV and S&F testing and commissioning of 150mm bore pipe heavy duty class "CMS" pipe 6mm thick, ISI marked as per IS : 1239 with all necessary fitting & fabrication like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc welding or screwed joints as required including fixing of pipe with necessary standard clamps structural steel supports (chilly make) as required / directed at site including painting of two coats of synthetic enamel paint of post office red colour over two coats of red oxide primer complete all as specified and directed.

Taking down old UNSV and S&F testing and commissioning of 100mm bore pipe heavy duty class "CMS" pipe 6mm thick, ISI marked as per IS : 1239 with all necessary fitting & fabrication like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc welding or screwed joints as required including fixing of pipe with necessary standard clamps structural steel supports (chilly make) as required / directed at site including painting of two coats of synthetic enamel paint of post office red colour over two coats of red oxide primer complete all as specified and directed.

Taking down old UNSV and S&F testing and commissioning of 80mm bore pipe heavy duty class "CMS" pipe 6mm thick, ISI marked as per IS : 1239 with all necessary fitting & fabrication like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc welding or screwed joints as required including fixing of pipe with necessary standard clamps structural steel supports (chilly make) as required / directed at site including painting of two coats of synthetic enamel paint of post office red colour over two coats of red oxide primer complete all as specified and directed.

Supply and fixing in repair 50 mm bore Gun metal gate valve with iron wheel head, screwed both ends for iron pipes or for unions as per IS : 778-84 marked CL-1 pressure tested 2.4 Mpa complete all as specified and directed.

Taking down old UNSV Female coupling from fire hydrand and Supply & Fix Gun metal female coupling of fire hydrant of 65mm dia as per sample ISI marked suitable for fire hydrant fixed in 41 veh coy complete all as specified and directed.

M&L for Surface dressing n exc 15 cm deep Cutting of bushes / wild growth of any kinds and taking out root of wild growth by digging and making good surface including removing all unwanted material such as bushes branches, bushes roots , shrubs, brushwood, undergrowth roots and sweeping neat and clean arround outer area of sum well and pump houses premises complete all as specified and as direceted by Engr -in-charge.

Material and labour for Construction of brick masonry valve pit of size 100 cm x 100 cm x 90 cm (internal dimensions), using old size sub class "B" brick, built in cement mortar (1:6) and 10 mm thick cement plaster (1:4) both internally and externally, with 75 mm thick PCC (1:3:6) type C-2 in foundation, PCC (1:2:4) type B-2 in benching complete with and including 2 mm thick mild steel sheet cover (mounted on angle iron frame of size 50 mm x 50 mm x 6 mm thick, embedded in PCC (1:2:4) type B-1 coping), fitted with proper locking arrangement, hinges and handle of suitable size and painting with two coats of black bituminous paint over a coat of red oxide zinc chrome primer on all steel surfaces, including necessary earth work (in soft / loose soil), returning filling and removal of surplus soil to a distance not exceeding 50 metre including demolition of old pitcomplete all as specified and directed .

Material and labour for Construction of brick masonry valve pit of size 90 cm x 90 cm x 90 cm (internal dimensions), using old size sub class "B" brick, built in cement mortar (1:6) and 10 mm thick cement plaster (1:4) both internally and externally, with 75 mm thick PCC (1:3:6) type C-2 in foundation, PCC (1:2:4) type B-2 in benching complete with and including 2 mm thick mild steel sheet cover (mounted on angle iron frame of size 50 mm x 50 mm x 6 mm thick, embedded in PCC (1:2:4) type B-1 coping), fitted with proper locking arrangement, hinges and handle of suitable size and painting with two coats of black bituminous paint over a coat of red oxide zinc chrome primer on all steel surfaces, including necessary earth work (in soft / loose soil), returning filling and removal of surplus soil to a distance not exceeding 50 metre including demolition of old pit complete all as specified and directed.

M/S K D ENTERPRISE (BID ID -3488623)

Goswami Traders (BID ID -3483212)