PROVISION OF DEFICIENT SAILORS MARRIED ACCOMMODATION 464 DUS G PLUS 30 AT TROMBAY MUMBAI

Amount

SCHEDULE "A" Part - I (BUILDINGS & STRUCTURES WORKS) Total of Sch-'A' Part-I B/F

SCHEDULE "A" PART-II (SITE CLEARANCE, AREA DEVELOPMENT, EXCAVATION & EARTHWORK) Total of Sch-'A' Part-II B/F

SCHEDULE "A" PART-III (INTERNAL WATER SUPPLY) Total of Sch-'A' Part-III B/F

SCHEDULE "A" PART-IV (INTERNAL ELECTRICFICATION) Total of Sch-'A' Part-IV B/F

SCHEDULE "A" PART- V (ROAD/PATHS/CULVERT) Total of Sch-'A' Part-V B/F

SCHEDULE "A" PART-VI (SEWAGE DISPOSAL) Total of Sch-'A' Part-VI B/F

SCHEDULE "A" PART-VII (SEWAGE TREATMENT PLANT) Total of Sch-'A' Part-VII B/F

SCHEDULE "A" PART-VIII (AREA DRAINAGE) Total of Sch-'A' Part-VIII B/F

SCHEDULE "A" PART-IX (RETAINING WALL) Total of Sch-'A' Part-IX B/F

SCHEDULE "A" PART-X (SECURITY WALL) Total of Sch-'A' Part-X B/F

SCHEDULE "A" PART-XI (STEEL GATE) Total of Sch-'A' Part-XI B/F

SCHEDULE "A" PART-XII (EXTERNAL ELECTRIFICATION) Total of Sch-'A' Part-XII B/F

SCHEDULE "A" PART-XIII (EXTERNAL WATER SUPPLY) Total of Sch-'A' Part-XIII B/F

SCHEDULE "A" PART-XIV (TREATED WATER SUPPLY) Total of Sch-'A' Part-XIV B/F

SCHEDULE "A" PART-XV (FIREFIGHTING) Total of Sch-'A' Part-XV B/F

SCHEDULE "A" PART-XVI ( AVIATION LIGHT ) Total of Sch-'A' Part-XVI B/F

SCHEDULE "A" PART-XVII (TV/TELEPHONE CONDUITS) Total of Sch-'A' Part-XVII B/F

SCHEDULE "A" PART -XVIII (MISCELLANIOUS ITEMS)

SITE CLEARANCE & EARTHWORK

Removing excavated material (any type) and depositing it outside Ministry of Defence Land. Note for 19.001 (i) Before quoting the tender, the bidders are advised to ascertain the distance outside MD and, at which the excavated material/ debris are to be disposed off. No extra claim what-so-ever shall be entertained on this account. (ii) This item shall be considered as per the requirement at site.

PILE FOUNDATION

M&L for drilling into any type of soil strata lowering upto non-collapsible strata for following dia cast in situ piles all as required and getting out and disposal of spoil outside MD land and depositing at a place including erecting pilling equipment of any type complete with all accessories centering in position and removing on completion of each pile all as shown on drawing, specified & as directed by Engineer in Charge

(a) 900 mm Dia

(b) 450 mm Dia

M&L for drilling into Soft/disintegrated/weathered rock lowering upto non-collapsible strata for following dia cast in situ piles all as required and getting out and disposal of soft/ disintegrated/weathered rock outside MD land and depositing at a place including erecting pilling equipment of any type complete with all accessories centering in position and removing on completion of each pile all as shown on drawing, specified & as directed by Engineer in Charge

(a) 900 mm Dia

(b) 450 mm Dia

M&L for drilling into hard rock lowering upto non-collapsible strata for following dia cast in situ piles all as required and getting out and disposal of hard rock outside MD land and depositing at a place including erecting pilling equipment of any type complete with all accessories centering in position and removing on completion of each pile all as shown on drawing, specified & as directed by Engineer in Charge

(a) 900 mm Dia

(b) 450 mm Dia

NOTE for Sr No 20.001 to 20.009 (a) Spoil shall be disposed off outside MD land . The unit rate quoted against item Nos 20.001 to 20.009 shall interralia be deemed to include for this operation and no extra payment shall be admissible on this account. (b) Drilling of piles shall be measured and paid from marked average ground level to bottom of pile.

M & L for RMC M35 design mix concrete and Tremie Concreting as per IS 456 of 2000 in piles cast in situ piles of 900mm dia of any length using tremie pipe concrete method including cutting and knocking down waste concrete complete all as shown on drawings, specified and directed. Note : RCC will be measured and paid from cutoff level and rate quoted shall be inclusive of cutting and knocking of RCC waste above cut off level

M & L for RMC M35 design mix concrete and Tremie Concreting as per IS 456 of 2000 in piles cast in situ piles of 450mm dia of any length using tremie pipe concrete method including cutting and knocking down waste concrete complete all as shown on drg., specified and directed. Note : RCC will be measured and paid from cutoff level and rate quoted shall be inclusive of cutting and knocking of RCC waste above cut off level

M & L for CRS TMT (Fe 500d) of following dia with binding wire, cover block & cutting, bending, binding and fixing with lowering of pile cage into pile of 900 mm dia complete all as directed by Engineer in Charge.

(a) 16 mm dia

(a) 25 mm dia

M & L for CRS TMT (Fe 500d) of 10mm dia in stirrups, Guide rings, spacers and binders

M & L for CRS TMT (Fe 500d) of16mm dia with binding wire, cover block & cutting, bending, binding and fixing with lowering of pile cage into pile of 450 mm dia complete all as directed by Engineer in Charge.

M & L for CRS TMT (Fe 500d) of 10mm dia in stirrups, Guide rings, spacers and binders

M & L complete for High Strength Dynamic Load Test using capwac analysis as per ASTM4945 and IRC 78 on following dia pile in accordance with IS provisions for Initial Test including all necessary arrangements providing and setting up all necessary accessories and equipments carrying out the prescribed test as required/specified under the expert supervision noting the result, taking out the accessories and equipment on completion of test submitting the result in soft and hard copy quintuplicate all as directed by Engineer in Charge

(a) 450mm dia

(b) 900mm dia

M & L complete for Integrity Test on following dia pile in accordance with IS provisions including all necessary arrangements providing and setting up all necessary accessories and equipments carrying out the prescribed test as required/specified under the expert supervision noting the result, taking out the accessories and equipment on completion of test submitting the result in soft and hard copy quintuplicate all as directed by Engineer in Charge

(a) 450mm dia

(b) 900mm dia

M & L complete for High Strength Dynamic Load Test using capwac analysis as per ASTM4945 and IRC 78 on following dia pile in accordance with IS provisions for Routine Test including all necessary arrangements providing and setting up all necessary accessories and equipments carrying out the prescribed test as required/specified under the expert supervision noting the result, taking out the accessories and equipment on completion of test submitting the result in soft and hard copy quintuplicate all as directed by Engineer in Charge

(a) 450mm dia

(b) 900mm dia

M & L for providing and installing 6mm thick MS liner for bored cast in situ concrete piles with necessary stiffeners, driving shoe with continuous welding including cutting, welding, etc conforming to Fe 410-W (Gde E-250 Quality A) including applying one coat of primer with two coats of epoxy as anticorrosive treatment on external surfaces of liner as per manufacturer's instructions, complete all as specified and as directed by the Engineer-in-Charge. Notes: (i) Rates shall be inclusive of cutting the liner at cut off level. The rate is deemed to include for cutting, removal and salvage value of the material so obtained. (ii) MS liner will be measured and paid upto the cut off level of pile only. Additional MS liner if used for conveyance of construction shall be included in the rate quoted. No extra payment shall be made on this account. (iii)MS Liner shall be driven upto refusal level. The occurence of refusal level will be decided by GE at site based on visual inspection of bailer samples from pile bore, past experience and laboratory test results. The decisions of GE in this regard shall be final and binding.

INTERNAL WATER SUPPLY

S&F Two way bib cock with wall flange quarter turn (Low-flow) 16 mm dia. Make - Jaquar Model No KUP-35041PMGE or equivalent in Crab Tree/Kohler brand complete all as specified and directed by Engineer-in-Charge

S&F Bib cock with wall flange quarter turn (Low-flow) 16 mm dia. Make - Jaquar Model No KUP-35037PMGE or equivalent in Crab Tree/Kohler brand complete all as specified and directed by Engineer-in-Charge

S & F Overhead Shower ø140mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System 16 mm dia. Make - Jaquar Model No OHS-1757GD complete all as specified and directed by Engineer-in-Charge

S & F Hand shower (Health faucet) with 1 meter long easy flex tube in chrome finish and wall hook with NRV (Back flow preventer) Make - Jaquar Model No ALD-579 complete all as specified and directed by Engineer-in-Charge

S & F Angular Stop Cock 15 mm bore of pipe (16 mm outer dia) with Wall Flange chromium plated Stop valves Make - Jaquar Model No KUP-35053PM or equivalent complete all as specified and directed.

S & F Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges Make - Jaquar Model No FUS-29273UPRGE or equivalent complete all as specified and directed.

S&F Brass Compact PRV Make- Zoloto. Article No:1040B HSN Code - 84811000 complete all as specified and directed.

a) 32 mm Dia

b) 40mm dia

c) 50mm Dia

d) 65mm Dia

e) 80mm Dia

INTERNAL ELECTRIC SUPPLY

S & F modular type 25/32 A SP MCB, conforming to IS 60898- 1: 2002 complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. Make: Legrand Mylinc Cat. Part No. 6759 74 or equivalent model of MK or Havells

S & F modular type 3 pin 25/32 A socket, conforming to IS 1293: 2005 complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. Make: Legrand Ekinox³ Cat-Part No. 5734 66 or equivalent model of MK Cat-Part No. W26427, or Havells Cat-Part No. AHOKCXW251

S & F factory made not less than 1.2 mm thick sunken, modular flush sheet galvanized metal enclosure ( 8 Module) having zinc coating not less than 120 GSM, , conforming to IS 14772: 2000, having top, bottom, side and back-wall knockouts for conduit entry from any direction, suitable modular cover-plates complete all as specified and directed by the engineer-in-charge. Make: Legrand Arteor Cat-Part No. 6890 42 or equivalent model of Havells or Anchor

S & F vertical triple pole & neutral, double door, 4-way metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for MCCB up to 250 A as incomer and SP/TP MCBs as outgoing, reversible metal door, fully insulated 250 A copper busbar for each phase, two fully insulated & shrouded neutral bars, two earthbars, cable ties for cable management, prefitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed by engineer-in-charge. Make: Legrand, Schneider, L & T NOTE: FP MCCB & SP/TP MCBs shall be measured and paid separately.

S & F MCB for AC applications conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters, etc. complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. Make: Schneider, Legrand, L & T

6- 32 A, 230 V, 50 Hz, SP MCB (C curve)

40- 63 A, 230 V, 50 Hz, SP MCB (C curve)

6- 32 A, 230 V, 50 Hz, SPN / DP MCB (C curve)

6- 32 A, 415 V, 50 Hz, TPN / FP MCB (C curve)

S & F 80 A moulded case circuit breaker (MCCB), four pole, in single frame size up to 250 A with thermal magnetic trip unit (TMD), compression lug connectors, protection against overloads (Ir adjustable from 0.7- 1 X In), protection against short circuits (Isd adjustable from 1.5- 10 X Ir), inbuilt encapsulated double break roto active type instantaneous protection, earth fault leakage protection, etc. having Ics = 100% Icu = 16 kA as per IEC 60947-2 complete all as specified and directed by engineer-in-charge. Make: Schneider, Legrand, L & T

M & L for 4 core, 16 mm² (for Tap- Box to floor DBs) 1.1 kV grade copper conductor, XLPE insulated armoured cable conforming to IS 7098 (Part 1): 1988, having stranded copper compact shaped conductors as per Cl. 2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanised steel strip/wire and PVC Type ST-2 outer sheath conforming to IS 5831: 1984, including necessary clamping / dressing with cable ties and termination complete all as specified and directed by engineer-in-charge. Make: FR-LSH flexible cable: Polycab, RR Kabel, Havells; Medium grade UPVC conduits: Precision, Prince, Supreme

S & F surface / wall mounted LED batten capable of delivering 2000 lumen, having PC diffuser, luminous efficacy of > 90 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge. Make: Philips Cat-Part No. BN 021C LED20S- PSU CW GR S2 or equivalent model of Havells Cat-Part No. LHEXAPP7IN1W020 or Wipro Cat-Part No. LL20-281-XXX-65AL1

S & F 3-star (EEL) T-shape lamp capable delivering 1000 lumen having luminous efficacy of > 100 lm/W, starting time < 0.5 s, CRI > 80, CCT 6500K, PF >0.9, input voltage range 140- 270 V, input frequency 50- 60 Hz and B22 socket complete all as specified and directed by the engineer-in-charge. Make: Philips Cat-Part No. T- Bulb CW 10W B22 or equivalent model of Havells Cat-Part No. LHEXACP7FN1W010 or Wipro Cat-Part No. LL20-111-XXX-65-NE

S & F LED Bathroom light suitable for wall mounting & 220- 240 V, 50 Hz mains voltage with built-in LED & driver, power rating ≤ 8 W, including IP 20 protection as well as electrical connection with 3 core 1.0 mm² PVC insulated copper conductor unarmoured cable to the fixture complete all as specified and directed by engineer-in-charge. Make: Philips Cat-Part No. 34034/14/86 or equivalent model of Havells Cat-Part No. LHLDEUECNL8R009

S & F surface mounted round shape LED downlight capable of delivering 1200 lumen. having minimum luminous efficiency > 100 lumen/W, CCT 6500K, CRI > 80, high quality polycarbonate diffuser, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection complete all as specified and directed by the engineer-in-charge. Make: Philips Cat-Part No. SM250C LED12S- 6500 PSU WH or equivalent model of Havells Cat-Part No. LHEAABP7IL1W012 or Wipro Cat-Part No. LD80-101-XXX-60-SM

S & F 25 W street light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 2600 lumen/W, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high efficiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enamel paint over a coat of red oxide primer complete in all respect as specified and directed by engineer-in-charge. Make: Philips BRP042 LED 26 CW MR S1 PSU GR or equivalent model of Havells Cat-Part No. ENDURAPEARLSL25W LED757 SASYTOPCMP or Wipro Cat-Part No. LR02-291-XXX-57-XX

S & F BEE five star rated energy efficient high-speed ceiling fan having 1200 mm blade sweep, air-flow not less than 200 CMM, operating voltage 220-240 V and frequency 50 Hz, including a downroad of suitable size complete with electrical connection through 3 core PVC insulated copper conductor unarmoured cable of suitable size as specified and directed by engineer-in-charge. Make: Crompton Cat-Part No. ENTRUST 50- 5 STAR or equivalent model of Havells Cat-Part No. ES - 50 Premium or BAJAJ Cat-Part No. Electra 50

S & F energy efficient non-metallic fresh air fan having blade sweep 250 mm, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed by engineer-in-charge. Make: Crompton Cat-Part No. VENTILUS 10" or equivalent model of Havells Cat-Part No. Ventil Air - DX White or BAJAJ Cat-Part No. Maxima DX

S & F energy efficient metallic exhaust fan having blade sweep 300 mm, air delivery not less than 6000 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed by engineer-in-charge. Make: Crompton Cat-Part No. EXHD300- 4-1 or equivalent model of Havells Cat-Part No. Ventil Air - DSP or BAJAJ Cat-Part No. Max Air

Supply, installation, testing and commissioning of sandwich type (3L+N+PE) busbar trunking system complete with two runs of 50 mm X 6 mm aluminium earthing strip and accessories all as specified and directed by engineer-in-charge. Make: L & T, Schneider, Siemens The BBT shall conform to the following technical specifications: [A] GENERAL [i] The busbar trunking system (BTS), both feeder and plug-in, shall be of sandwich construction. All components and fittings (straight length, elbow, tee, flanged end, cable tap-off box and circuit breaker etc.) shall conform to IEC 61439-6:2012 or UL 857 and shall be procured from the OEM of BTS. The BTS shall have IP 65 protection with canopy for outdoor application and IP 54 protection for indoor application in accordance with IEC 60529: 1989. [ii] The rated operation voltage of BTS shall not be less than 1 kV. The neutral conductor shall have the same cross-sectional area as the phase conductor and the earth busbar shall be provided on both sides of the housing. [B] CERTIFICATE [i] The busbar , of full range and each rating, shall pass full type tests specified in IEC 61439-6-2012. The certificate shall be issued by an international independent testing authority, e.g. ASTA. KEMA. UL and ERDA etc. [ii] A product safety mark, e.g. KEMA-KEUR, ASTA DIAMOND, UL and ERDA, etc. shall be on the product offering a visual assurance of full product safety testing, factory inspection and ongoing surveillance under independent authority.

[iii] The BTS shall have UBC seismic zone 5 compliance tested with busduct and plug-in box assembly by an internationally recognized earthquake research body, e.g. Asian Pacific Network of Centres for Earthquake Engineering Research (ANCER) as per IEEE 693- 2018. The OEM shall also furnish a certificate to confirm that the BTS assembly is capable of withstanding the additional vibration in shaft owing to air movements. [C] SHORT-CIRCUIT RATINGS & TESTS [i] The entire BTS (busduct and plug-in box assembly) shall be capable of withstanding the short-circuit of electrical installation without undergoing any electrical, mechanical or thermal stress under fault condition at a service voltage of 1 kV at 50 Hz frequency. The minimum rated insulation voltage shall be 1 kV. [ii] The minimum certified short-circuit withstand capacity for 800 A rating shall be 40 kA for 1 sec. [iii] The minimum certified short-circuit withstand capacity for 2500 A rating shall be 75 kA for 1 sec. [D] HOUSING [i] The busbar trunking housing shall be constructed of 1.6 mm thick electro- galvanised steel and shall be provided with a suitable protective finish of epoxy paint.

[ii] The busbar trunking housing shall be totally enclosed non-ventilated for protection against mechanical damage and dust accumulation and it shall be tested for its characteristics offering resistance against corrosion [iii] The totally enclosed housing shall be manufactured by the BTS OEM and modifications of busbar trunking to make it totally enclosed by housing other than the busbar trunking OEM shall be unacceptable without written consent of the OEM. [E] BUSBARS [i] The busbars shall be of aluminium with tin / silver plating at joint. [ii] There shall be no bolts passing through the busbars of the BBT. [iii] Each busbar shall be insulated with Class- F (155 ˚C) insulation or above. Epoxy insulation shall be unacceptable. [iv] The temperature rise at any point of busbar trunking enclosure shall not exceed 55 ˚C above the ambient temperature of 40 ˚C when operated at the rated current. [F] JOINTS [i] The busbar trunking joint shall be of one-bolt type utilizing high strength steel bolt(s) and Belleville washers to maintain proper pressure over a large contact surface area. [ii] The bolt(s) shall be torque indicating and at earth potential. [iii] The bolt shall be of two-headed design to indicate proper torque has been applied and shall require only a standard long handle wrench to be properly activated.

[iv] Access shall be required to only see one side of the busbar trunking to tighten joint bolts. [v] It shall be possible to remove any joint connection assembly to allow electrical isolation or physical removal of a busbar trunking length without disturbing adjacent busbar trunking lengths. [G] PLUG-IN OPENING [i] The connecting jaw of a plug-in unit shall plug directly onto the busbar and have full contact with busbar itself. Welded tab at plug-in busbar is unacceptable. [ii] All contact on joint and plug-in opening shall be of copper strip in order to avoid external force damage on busbar while plugging in or plugging out operation. [iii] On plug-in busbar trunking there shall be three dead front, hinged cover type plug-in opening on each side. [iv] All openings shall be usable simultaneously. Busbar trunking shall be installed in such a manner that plugs are side mounted to permit practical use of all plug-in openings. [v] It shall be possible to inspect the plug-in opening and busbars prior to the installation of plug-in units. [H] SUPPORT STRUCTURE [i] Support structure shall be provided as per OEM's recommendation. [ii] Indoor feeder and plug-in busbar trunking shall be approved for hanger spacing of up to 3 m for horizontally mounted run and 4.88 m for vertically mounted runs. Outdoor feeder busbar trunking shall be approved for spacing up to 1.5 m for horizontally or vertically mounted runs.

[I] VOLTAGE DROP [i] The voltage drop (sending end voltage minus receiving end voltage) specified shall be based on the busway operating at full rated current and stabilized operating temperature in [ii] The 3- Phase line to line voltage drop shall not exceed 3.4 V per 100 feet length at 40% power factor concentrated load which may exist during motor starting. [iii] The line to line voltage drop shall not exceed 4.1 V per 100 feet at the load power factor which produces the maximum voltage drop in the busway. [J] INSPECTION / SUPPORT OF INSTALLATION [i] The installation of BBT shall be executed by skilled professionals with minimum experience of 4 yrs. having sufficient installation base and pre-commissioning experience. [ii] The entire installation shall be directly supervised by the OEM. [iii] The OEM shall also furnish a commissioning report underlining satisfactory installation after the commissioning of BBT system. [i] The bidder shall furnish dimensional drawings of the items offered, indicating all the fittings, dimensional tolerances, typical GADs, etc. with details of insulation at each point and core construction, etc. for approval of the Garrison Engineer.

Straight Run Feeder (IP 54 protection)

Flange End with Equalizer / Shorting Plate

Horizontal / Vertical Bend

Plug-in Point

Vertical Spring Hanger / Fix Hanger

End Cover

Expansion Joint

Tinned Copper Braided Flexibles with Hardware- Nuts & Bolts

Adapter Box at Panel End

Straight Run Feeder (IP 54 protection)

Flange End with Equalizer / Shorting Plate

Horizontal / Vertical Bend

Plug-in Point

Vertical Spring Hanger / Fix Hanger

End Cover

Expansion Joint

Tinned Copper Braided Flexibles with Hardware- Nuts & Bolts

Adapter Box at Panel End

STANDARD PLUG-IN BOX / TAP-OFF UNIT WITH FP MCCB

PIB / TOU with 32 A, 415 V, 25 kA, 50 Hz, FP MCCB

PIB / TOU with 80 A, 415 V, 25 kA, 50 Hz, FP MCCB

PIB / TOU with 200 A, 415 V, 25 kA, 50 Hz, FP MCCB

END FEED UNIT WITH FP MCCB / ACB

End Feed Unit (EFU) with 800 A, 36 kA, 415 V , 50 Hz, FP ACB

End Feed Unit (EFU) with 2500 A, 36 kA, 415 V , 50 Hz, FP ACB

SUPPORTING STRUCTURE

Horizontal Fixing Clips

M & L of structural steel for BBT support structure with painting as recommended by OEM.

Supply, installation, testing and commissioning of factory made, CPRI type tested, indoor cubical compartmental type ROOF FLOOR PANEL of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete as specified and directed by engineer-in-charge. (for lift & machine room DBs) Make: L & T, Schneider, Siemens, ABB The ROOF FLOOR PANEL shall comprise of the following: [A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 320 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [B] INCOMING [i] 200 A, 415 V, Ics = 100% Icu = 25 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos.

[ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interrupts- 01 Nos. [iii] LED phase indicators (Red, Yellow, Blue)- 01 Set [C] OUTGOING [i] ISI marked 40 A, 300 mA, 415 V, 50 Hz, FP RCBO for AC applications, conforming to IS 12640 (Part-2)- 2016, having front face indication for earth leakage fault, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters- 04 Nos. [ii] ISI marked 32 A, 300 mA, 415 V, 50 Hz, FP RCBO for AC applications, conforming to IS 12640 (Part-2)- 2016, having front face indication for earth leakage fault, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters- 02 Nos. [iii] 32 A, 10 kA, 230 V, 50 Hz DP MCB- 01 Nos. (For Machine room DBs) [iv] LED phase indicators (Red, Yellow, Blue)- 06 Set [v] Digital ammeter of suitable capacity with suitable CTs for each feeder- 06 Nos. NOTES: [i] The Panel shall be purchased from the original equipment manufacturer (OEM) only. [ii] The bidder shall furnish dimensional drawings of the items offered indicating all the fittings, dimensional tolerances, GADs, etc. for approval of the Engineer-in-Charge.

SEWAGE DISPOSAL

Supply and laying Steel Fibre reinforced concrete manhole cover complete all as specified.

SEWAGE TREATMENT PLANT

A) RAW SEWAGE TRANSFER PUMP Supply, installation, testing and commissioning (SITC) of horizontal non-cloging, single stage, single suction solid handling pump having 60 m3/hr @ 10 MWC head (2W + 1S) for wet pit applications (handling sewage or waste with soft solids in suspension having maximum permissible solid size up to 100 mm) with back pull out design, cast iron casing having end suction with horizontal side delivery & high efficiency volute providing smooth and unobstructed flow; single suction type non-clog, free flow, dynamically balanced stainless steel impeller, stainless steel shaft, etc. suitable for direct coupling with TEFC squirrel cage induction motor suitable for operation on 3-Ph, 415 V±10%, 50 Hz AC supply and conforming to IS 12615: 2018, base plate, mounting channel frame, accessories and fittings, viz. pressure gauge, drain, coupling, coupling guard, vibration isolation arrangement by means of spring / rubber type mounting and foundation as per manufacturer's recommendation complete all as specified and directed by the engineer-in-charge. Make: Kirloskar/ Crompton greaves / CRI Pumps

ULTRASONIC LEVEL TRANSMITTER Supply, installation, testing and commissioning of 2-wire loop powered ultrasonic transmitter for level monitoring of water level in suitable for ambient temperature range -40 ºC to +80 ºC & outdoor usage complete all as specified and directed by the engineer-in-charge. Make: Siemens / Schneider / L&T / Honetwell / Danfos The ultrasonic level transmitter shall conform to the following technical specifications [a] Inputs [i] Measuring Range: 0.25 to 6 m [b] Outputs [i] Range: 4 to 20 mA [ii] Accuracy: ±0.02 mA [c] Performance [i] Resolution: ≤ 3 mm [ii] Accuracy: ±0.02 mA [iii] Repeatability: ≤ 3 mm [iv] Blanking distance: 0.25 m

[v] Update time: ≤ 5 s [vi] Temperature compensation: Built-in to compensate over temperature range [vii] Beam angle: 10º [d] Design [i] Material (enclosure): Polybutylene Terephthalate (PBT) [ii] Degree of Protection: IP 68 [iii] Cable Inlet: 2 X M20 X 1.5 cable gland "[iv] Material (transducer): Buna-N seal with Ethylene Tetrafluoroethylene (FTFE) or Polyvinylidene Fluoride (PVDF)" [e] Display & Controls [i] Interface: LCD display with bar graph [ii] Memory: Non-volatile EEPROM [f] Power Supply [i] Nominal 24 V DC with 550 Ω maximum, maximum 30 V DC 4…20 mA [ii] 12, 13, 15, or 20 mA depending on programming (General Purpose or Intrinsically Safe version) per IEC 61158-2

B) PRIMARY TREATMENT SYSTEM S & F of overflow type oil skimmer with flow of 0-50 LPH with belt size 150 mm and motor rating 0.5 hp complete all as specified and directed by engineer-in-charge.

C) SECONDARY TREATMENT SYSTEM Supply, installation, testing and commissioning (SITC) of submersible, non-clogging, Equilized Waste Water Transfer Pump having having 10 m3/hr at 10 MWC head, continuous duty rating, cast iron casing, stainless steel impeller and stainless steel shaft complete directly coupled with induction motor 415 V, 3- Phase, 50 Hz of suitable capacity with 2900 RPM, IP 58 protection, class F insulation including installation, foundation as per OEM specification, electrical connection, with suitable rating of copper cables, starter panel with complete protection device such as over load current protection, phase reversal, single phasing, no voltage / over voltage protection, complete accessories such as voltmeter, Ammeter, LED indicators etc. all complete as specified in technical / particulars specification and directed by engineer-in-charge. (2 W + 1 S) Make: Kirloskar/ Crompton greaves / CRI Pumps

Supply, installation, testing and commissioning (SITC) of twin lobe rotary air blowers capable of delivering 380 m3/hr of atmospheric air at sufficient pressure, driven through "V" belt or directly coupled through flexible coupling to a TEFC motor suitable for 415±10% V, 3- Ph, 50 Hz AC supply complete all as specified and directed by engineer-in-charge. (2 W + 1 S) Make: Bosch, Aqua or Equivalent Standard Accessories Required a.Common Motor &Blower Base Frame with Motor Base Plate and Belt Tightening Arrangement. b. Suction Silencer with Suitable Flanges. c. Suction Air Filter. d. Pressure Gauge. e. Pressure Relief Value (Spring Loaded Type). f. Blower& Motor Pulley with Belt Guard. g. Interconnecting Line with Flanges. h. Filter Hood. i. First Oil Fill. j. V Belt. k. NRV (Non Return Valve) l. Operation & Maintenance Manual. m. Programmable cyclic operation switch for operation of compressors with suitable timers contactors etc as per STP requirement

Supply, installation, testing and commissioning (SITC) of Sodium Hypochlorite dosing system consisting of one HDPE tank of 150 litres capacity, positive displacement diphragm dosing pump having variable flowrate of 0-6 LPH along with motor suitable for operation at 230 V, 1- Ph, 50 Hz. supply and complete with necessary polypropylene piping, valves, strainers, low level switch and injection fittings. The pump shall have speed & stroke control complete all as specified and directed by engineer-in-charge. Make: CRI, Kirloskar, Crompton

Supply, installation, testing and commissioning (SITC) of centrifugal Anoxic recirculation pumps capable of 40 m3/hr discharge at 8 MWC head and having solid handling capacity of minimum 32 mm size particles having CI casing & impeller complete with all accessories, motor of required capacity, delivery header with isolation valve, pressure gauge with isolation cock, level controller (with wiring) to control, etc. complete all as specified and directed by engineer-in-charge. (2 W + 1 S) Make: Kirloskar/ Crompton greaves / CRI Pumps

Supply and spread a floating meadia for MBBR reactor in PP construction wagon wheel design having density less than water and the Vergin Media 0.97gram/cc & surface area of media, minimum 500 m2/m3 complete all as specified and directed by engineer-in-charge. Make: CRI,Kirloskar,Crompton

Supply & fix Tube settler modules made of PVC size 1.2 m long X 1.8 m width X 3m depth thickbess 3 to 10 mm complete all as specified and as directed Type- Fluidized Bio Media Color- Black Size- 22 mm X 15 mm length Material - Virgin PP UV Stabilized Note:- The size, Specification shall be as per OEM of Stp

D) TERTIARY SYSTEM Supply, installation, testing and commissioning (SITC) of Centrifugal filter feed pump capable of 20 m3/hr discharge at 20 MWC head having solid handling capacity of minimum 5 mm size particles CI casing & impeller complete with all accessories, motor suitable for 415±10% V, 3- Ph, 50 Hz AC supply, pressure gauge with isolation cock, isolation valve, NRV on delivery line, strainer at suction. mechanical seal, suitable vibration elimination pads of approved design, drain pipe with valve, etc. complete all as specified and directed by engineer-in-charge. (2 W+ 1 S) Make: CRI,Kirloskar,Crompton

Supply, installation, testing and commissioning (SITC) of MSEP vessel for pressure sand filter of ø 1000 mm & 1850 mm HOS (shell & dishend thickness 4.0 mm minimum) suitable for test pressure of 5.0 kg/cm²,20 m3/hr and working pressure of 3.5 kg/cm², including media (pebbles, sand, silex, fine sand, fine silex), standard fittings viz. pressure gauge, sampling cock, backwash including frontal piping & valves, etc. complete all as specified and directed by engineer-in-charge. Note :- The filter shall be as per OEM specification and description with minimum of 5 mm thickness including media, all inlet and outlet pipes and valves, non return valves/vents/manifolds/laterals/dish ,air release valves, gauges, etc back wash facility and all connected items for full functioning including outdoor usage protective paint foundation testing and commissioning & inlcusive of rate Make:ION Exchange / Thermax/Hydrotech

Supply, installation, testing and commissioning (SITC) of MSEP vessel for activated carbon filter of ø 1200 mm & 2000 mm HOS (shell & dishend thickness 4.0 mm minimum) suitable for test pressure of 5.0 kg/cm², 20 m3/hr and working pressure of 3.5 kg/cm², including media (activated carbon with supporting media), standard fittings viz. pressure gauge, sampling cock, backwash including frontal piping & valves, etc. complete all as specified and directed by engineer-in-charge. Make:ION Exchange / Thermax/Hydrotech Note :- The filter shall be as per OEM specification and description with minimum of 5 mm thickness including media, all inlet and outlet pipes and valves, non return valves/vents/manifolds/laterals/dish ,air release valves, gauges, etc back wash facility and all connected items for full functioning including outdoor usage protective paint foundation testing and commissioning.& inlcusive of rate

E) SLUDGE DEWATERING SYSTEM Supply, installation, testing and commissioning (SITC) of Non clogging type centrifugal Filter Press Screw Pump capable of 1 m3/hr discharge at 45 MWC head having CI casing & impeller complete with all accessories, motor of required capacity, delivery header with isolation valve, pressure gauge with isolation cock, level controller (with wiring) to control, etc. complete all as specified and directed by engineer-in-charge. (1 W + 1 S) Make: CRI,Kirloskar,Crompton

F) (PIPES)For Compressed air

S & F of stainless steel 304 pipe of 150 mm NB complete all as specified and directed by engineer-in-charge. Make: Jindal,TATA or equivalent

S & F of stainless steel 304 pipe of 80 mm NB having .(For MBBR tank) complete all as specified and directed by engineer-in-charge. Make: Jindal,TATA or equivalent

S & F of stainless steel 304 pipe of 65 mm NB having perforation slots of appropriate size so that the total perforated area is not less than 25% of the pipe surface area complete all as specified and directed by engineer-in-charge. (For equalisation tank) Make: Jindal,TATA or equivalent

S & F of stainless steel 304 pipe of 40 mm NB having (For brance in all tank) complete all as specified and directed by engineer-in-charge. Make: Jindal,TATA or equivalent NOTES for Item no 24.016 to 24.019 [i] Air piping comprising of pipes droppers / laterals with MS (epoxy coated) header complete with all fittings viz. tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, puddle flanges etc. [ii] Air dispersion system for equilization tank & anoxic / MBBR tank & sludge holding tank with fine & coarse bubblers

G) FOR SEWAGE PUMP

M & L for ASTM (uPVC) D 1785 / Sch 40 pipe, 150 mm NB dia conforming to IS 4985: 2000, with all fittings laid in trenches complete all as specified and directed by the engineer-in-charge.(For Wet well Pump) Make: Astral,Aquarious or equivalent

M & L for ASTM (uPVC) D 1785 / Sch 40 pipe, 100 mm NB dia conforming to IS 4985: 2000, with all fittings laid in trenches complete all as specified and directed by the engineer-in-charge. Make: Astral,Aquarious or equivalent

M & L for ASTM (uPVC) D 1785 / Sch 40 pipe, 80 mm NB dia conforming to IS 4985: 2000, with all fittings laid in trenches complete all as specified and directed by the engineer-in-charge. Make: Astral,Aquarious or equivalent

M & L for ASTM (uPVC) D 1785 / Sch 40 pipe, 65 mm NB dia conforming to IS 4985: 2000, with all fittings laid in trenches complete all as specified and directed by the engineer-in-charge. Make: Astral,Aquarious or equivalent

H) VALVES

S & F of strainer for suction 100 mm NB ISI Marked complete all as specified and directed by engineer-in-charge.

S & F of Agitators wiith Flange type gear box ,voltage rating 415 V with speed of 1400 RPM with munting flange type with motor rating 3 HP & thickness of base plate 5-6 mm and size of base 400 X 200 mm Completed all as specified and directed by engineer in charge

Supply, installation, testing and commissioning of factory made, CPRI type tested, outdoor, cubical compartmental type "Sewage Treatment Panel" of suitable size, conforming to IEC 61641, having both sides openable with hinged double doors & locking arrangement and IP 54 protection made out of 3.15 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length & size, including fixing lugs, bolts, screws etc. complete as specified and directed by the engineer-in-charge. Make: Schneider, Siemens, L & T, ABB The MCC shall comprise of the following: [A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 300 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [B] INCOMING [i] 200 A, 415 V, Ics = 100% Icu = 25 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.4 - 1 X In), adjustable short-circuit setting (1.5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload pre-alarm & Overload), etc.- 01 Nos. [ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interrupts- 01 Nos. [iii] LED phase indicators (Red, Yellow, Blue)- 01 Set [iv] ATS 200 Amps 415V, 4 pole- 01 nos

Supply, installation, testing and commissioning of Wet Well PLC Control Panel complete as specified and directed. [i] 32 A, 10 kA, 415 V, 50 Hz FP MCB (C- curve) 3 Nos. [ii] 6 A, 10 kA, 230 V, 50 Hz SP MCB (C- curve) 3 Nos. [iii] 24 V 4.2 A SMPS (01 Nos). [iv] Expansion Analog Input Model 01 Nos. [v] 8 chanel relay card 4 Nos. [vi] 6 A 2 Pole Control ON/OFF Switch 01 Nos. [vii] Red Indicator Lamp 01 Nos. [viii] Control Terminal 60 Nos. [ix] Power and control wire 01 Lot. [x] Misc hardware 01 Lot.\ [xi] 4 inch Exhuast fan 01 Nos. [xii] Programming logic will be ladder logic [xiii] 10 DI 14 DO PLC 01 Nos. Panel Enclosure Size :- 800 (W) X 1000 (H) X 300 (D) mm Approx Fabrication:- 16 SWG CRCA sheet Pre Treatment : 7 tank process Painting : Powder coated with RAL7035 Type : Wall painted IP 42 Enclosure

S&F Tube setller modules made up of PVC of approx size 1.2 mtr long x1.8 mtr width x3 mtr depth, with thickness approx 3 mm to 10 mm complete all as specified and directed Type- Fluidized bio media, colour- Black, 22x15 mm length material- virgin PP, UV stabilised. Note- The sizes shall be as per STP OEM recommendations

S & F NRV 80 mm dia complete all as specified and directed by E-in-Charge

S & F S/Valve 200 mm dia complete all as specified and directed by E-in-Charge

S & F S/Valve 100 mm dia complete all as specified and directed by E-in-Charge

S&F strainer for suction 100 mm dia complete all as specified and directed by E-in-Charge

S & F Butterfly valve 100 mm dia complete all as specified and directed by E-in-Charge

S & F Butterfly valve 80 mm dia complete all as specified and directed by E-in-Charge

S & F Butterfly valve 50 mm dia complete all as specified and directed by E-in-Charge

Supply, installation testing and commissioning of 2 wire loop powered ultrasonic transmitter for level monitoring of water level in suitable ambient temperature range -40 deg to +80 deg centigrade and outdoor usage complete all as specified and directd by E-in-Charge. Make-Siemens/ L&T/Honeywell/Danfoss/Schneider The Ultrasonic level transmitter shall confirm to the following tech specifications A) Input-Measuring range: 0.25 to 6.0 mtrs B) Outputs i)range: 4-20 mA (ii) Accuracy:+/-0.02mA C)Performance i) Resolution :<= 3 mm ii) Accuracy:+/-0.02mA iii) Repeatability: <=3 mm iv) Blancking distance: 0.25 m v) Update time: <= 5 s vi) Temperature compensation: Built in to compensate over temperature range vii) Beam angle: 10 Deg D) Design i) Material (enclosure)-Polybutylyneterephthalete( PBT) ii) Degree of protection: IP-68 iii) cabinet inlet: 2xM20x1.5 cable gland iv) Material (transducer: Buna-N seal with ethylene tetrafluroethelyne (FTFE) or PVDF E) Display and controls i) Interface: LCD display with bar graph ii) Memory: Non volatile EEPROM F) Power Supply i) Nominal 24 V DC with 550 Ohm max, max 30 V DC 20 mA ii) 12,13,15 or 20 mA depending upon programming (general purpose for intricically safe version)as per IEC 61158-2

Supply and fixing electromagnetic flow meter 100 mm dia suitable for STP water with flow tube material SS 316, with protection class for sensors IP-65,MOC-PTTE, electrode material SS-316, process pressure max 25Kg/SqCm, process temp - max 150 deg centigrade, measuring range-0.5m/sec for minimum to 5 m/ sec for maximum, accuracy +/- 1%, Display- 2 line alphanumeric LCD, Display version Integral / remote, in line flange type suitable for power supply of 230VAC 50 Hz output std 4-20mA, complete with RS-485 Port with data logger suitable 2.5 sqmm copper three core wire of suitable length, complete all as specified and directed (One each to be fitted after equilisation tank and before treated water tank) Make: Flowtech/Ztech or equivalent

SECURITY WALL, STEEL GATE & WICKET GATE

S&F for 600mm dia circle concertina coil hot dip galvanised coated with anitcorrosive paint including 125 to 127 clips per coil, 50 circles of wire in each coil, length coverage not less than 6m and weight not less than 8.5kg per coil stud tied with GI clips and GI staples, including necessary bolts/pins/ GI barbed wire tied to angle iron brackets of fencing and core wire having minimum wire dia of 2.59mm and tensile strength of 1620 N/sqmm with Reinforced Barbed Tape(RBT) complete as per directions of Engr-in-charge

Supplying and fixing of Wheel Track For Steel Gate complete all as specified and directed by engineer in charge

Supplying and fixing of Sliding Gate Wheel for steel gate complete all as specified and directed by engineer in charge.

EXTERNAL ELECTRIFICATION

S & F LED bollard light fittings 8/9/10 Watt integral decorative with opal acrylic cone series IP 65 protection, and electronic LED driver, etc. with all accessories internal prewired & including connecting up with 2 core flexible copper conductor cable and foundation made of bricks with cement plaster of size 30 cm x 30 cm x 45 cm (height), including sintex box with heavy duty four pole connector 32 A - one no. and 6 A- MCB, sintex box of size 20 cm x 15 cm housed in the foundation with incoming/ outgoing PVC pipe of suitable size of cable all specified and directed. Make : Bajaj cat No.-BGBOM6509WLEDW or equivalent model of Phillips,Wipro or Crompton.

M & L for GI octagonal poles complete with single armed brackets as specified all for 6 m long with 70 mm top diameter and 130 mm bottom diameter, made of 3 mm thick tensile sheet along with base plate of size 225 X 225 X 12 mm thick, including 04 Nos. of M24 X 750 long 'J' type foundation bolts, MCB 6 A with 4-way heavy duty connector 32 A and RCC foundation as per manufacturer's drawing(s) complete as specified and directed by engineer-in-charge. Make: Jindal, Crompton, Bajaj

S & F 35 W LED street light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of > 100 lumen/W, integral SMPS based constant current electronic LED driver with THD < 10%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high efficiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size complete as all specified and directed by engineer- in- charge. Make : Bajaj cat No.-BRTFG 36W LED or equivalent model of Phillips, Wipro or Crompton.

Supply, installation, testing and commissioning of intelligent street light control (ATSC) suitable for 6 kW maximum load, wall/pole mounted, having built-in networking support, built-in astronomical timer, 32 A TP contactor, 40 A TPN MCB housed in 3.15 mm thick powder CRCA sheet housing complete as all specified and directed by engineer- in- charge. (for street light and bollard light) Make: Havells, HPL, Insu

EXTERNAL WATER SUPPLY

M & L for PN 1.0 rated 150 mm NB swing type foot valve cum strainer, conforming to IS 4038: 1986, suitable for vertical installation and having cast iron body, guide & strainer, soft grade iron plunger, SS spring, bronze seat ring, CS fasteners, flange drilling standard end connection and accessories complete all as specified and directed by the engineer-in-charge. Make: Kirloskar, Normex, Flomatic

M & L for PN 1.0 rated 100 mm NB swing check type reflux (non return) valve, conforming to IS 5312 (Part 1): 2004, having cast iron body, door & diaphragm, Leaded Tin Bronze seat rings, SS hinge pin, flange drilling standard end connection and accessories complete all as specified and directed by the engineer-in-charge. Make: Kirloskar, Leader, Venus

Supply, installation, testing and commissioning of automatic air-vent valve with 20 mm end connections, brass OT 58 body and cover, polyacetal lever, high density expanded polyethylene float, EPDM rubber plug, stainless steel spring, polyamide cap etc. suitable for maximum operating pressure of 16 bar and maximum operating temperature 115 °C respectively, installed on all high points in the water piping system to automatically remove the trapped air complete all as specified and directed by the engineer-in-charge. Make: Sant, Leader, Venus

S & F of Woltman type (removable mechanism) water meter of size 200 mm NB conforming to Class B of ISO-406-1, having magnetic drive with flange ends, hermatically sealed register, leak proof and sealed totaliser protected by metallic cover, reliable sensitive metrology and low pressure loss, suitable to measure minimum flow 7.5 m3/hr, transitional flow 50 m3/hr, nominal flow 250 m3/hr and maximum flow 300 m3/hr with minimum reading 0.02 m3 and maximum reading 9999999 m3, ±5% accuracy, temperature suitability 45 °C, test pressure 20 kg/cm2, with suitable 3 core 2.5 m² wire of suitable length etc. complete all as specified and directed by the engineer-in-charge. Make: Kranti, K Flow, Aquamet

Supply, installation, testing and commissioning of horizontal split-casing two stage single suction pump Horizontal split-casing pump of capacity 12 litre/s at 140 mWC head for fresh (domestic) water supply (2W + 2S) conforming to IS 6595 (Part 2): 1993 and having horizontal axially split volute type CI delivery casing, suction and discharge nozzles and supporting feet cast integral with lower half casing, enclosed balanced bronze impeller, high tensile steel (CS) shaft supported by antifriction bearing and protected by bronze shaft sleeves in stuffing box area sealed by mechanical seal, deep groove ball / roller bearing, standard drilling flanges etc. suitable for direct coupling with TEFC squirrel cage induction motor suitable for operation on 3-Ph, 415 V±10%, 50 Hz AC supply and conforming to IS 12615: 2018, base plate, mounting channel frame, accessories and fittings, viz. pressure gauge, drain, coupling, coupling guard, vibration isolation arrangement by means of spring / rubber type mounting and foundation as per manufacturer's recommendation complete all as specified and directed by the engineer-in-charge. Make: Kirloskar, CRI, Crompton Greaves NOTE: Necessary civil work viz. foundation for placement of pump and pump accessories shall be covered in the scope of work.

Supply, installation, testing and commissioning of factory made, CPRI type tested, indoor cubical compartmental type FRESH (DOMESTIC) WATER SUPPLY PANEL of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed by engineer-in-charge. Make: L & T, Schneider, Siemens, ABB The Panel shall comprise of the following: [A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 250 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [B] INCOMING [i] 160 A, 4P, 415 V ATS (WCR = 50 kA for 3 cycles)- 01 Nos. [ii] 160 A, 415 V, Ics = 100% Icu = 25 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.4 - 1 X In), adjustable short-circuit setting (1.5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload pre-alarm & Overload), etc.- 01 Nos. [ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interrupts- 01 Nos. [iii] LED phase indicators (Red, Yellow, Blue)- 01 Set

[B] OUTGOING [i] 100 A, 415 V, Ics = 100% Icu = 50 kA, 50 Hz TP MCCB, conforming to IEC 60947-2, having MA magnetic trip unit, short circuit protection with an adjustable pick-up Im = (6 to 14 X In) initiating instantaneous tripping if exceeded- 04 Nos. [ii] 3 Pole Power Contactor conforming to IEC 60947-4-1 and having AC-3 rating 95 A, 2 NO + 2 NC auxiliary contacts- 08 Nos. (Main and Delta Contactors)- 04 Nos. [iii] 3 Pole Power Contactor conforming to IEC 60947-4-1 and having AC-3 rating 50 A, 2 NO + 2 NC auxiliary contacts- 04 Nos. (Star Contactors)- 04 Nos. [iv] Thermal overload relay, conforming to IEC 60947-4-1, tripping class 10 A and having relay range 22-32 A - 04 Nos. [v] Motor protection relay - 04 Nos. [vi] 63 A, 415 V, Ics = 100% Icu = 25 kA, 50 Hz TP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.4 - 1 X In), adjustable short-circuit setting (1.5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload pre-alarm & Overload), etc.- 01 Nos. (for 25 kVAr APFC panel) [vii] 32 A, 10 kA, 415 V, 50 Hz FP MCB ('C' curve)- 01 Nos. (for Area Lighting) [viii] 32 A, 10 kA, 230 V, 50 Hz DP MCB ('C' curve)- 01 Nos. (for Domestic Water Pump House DB) [ix] Cl 1.0 ammeter having 0- 100 A measurement range- 05 Nos. [x] LED phase indicators (Red, Yellow, Blue)- 05 Set NOTES: [i] The Panel shall be purchased from the original equipment manufacturer (OEM) only. [ii] The bidder shall furnish dimensional drawings of the items offered indicating all the fittings, dimensional tolerances, GADs, etc. for approval of the Engineer-in-Charge.

Supply, installation, testing and commissioning of free-standing indoor semi-compartmentalised cubical type 25 kVAr APFC CAPACITOR BANK made out of 2.0 mm thick CRCA sheet and built upon rigid framework, having MPP type capacitor with 7% aluminium wound reactor units type tested in accordance with IS 16636: 2017 with contactor switching, IP 4X protection and including air system provided by axial flow fan or centrifugal fan, control wiring with FR-LSH copper wires complete as specified and directed by the engineer-in-charge. Make: L & T, Schneider, Siemens The APFC Capacitor Bank shall comprise of the following: [i] 63 A, 415 V, Ics = Icu = 36 kA, 50 Hz, TP MCCB with adjustable overload settings, adjustable short-circuit settings, adjustable earth- fault settings, current limiting type double break roto active type, instantaneous protection and microprocessor based trip unit- 01 Nos. [ii] High performance microprocessor based APFC relay with auto / manual switch option- 01 Nos. [iii] 3- Phase power analyser with in-built digital VAF meter, phase indicating LED lamps (R, Y, B), step indicating LED lamps, ON / OFF push buttons, timer, CT- 320/5 A, Cl1.0, 15 VA- 01 Nos. [iv] MPP capacitor of 25 ( 2 X 12.5) kVAr

[v] 7.5 kVAr- 02 STEPS [a] 32 A, 415, Ics = 100% Icu = 36 kA, 50 Hz TP MCCB with fixed magnetic settings and adjustable thermal settings- 02 Nos. [b] 3P, 7.5 kVAr power contactor (capacitor duty), 415 V, 50 Hz 230 VAC coil- 02 Nos. [c] 7% detuned reactor, 3- Ph, 7.5 kVAr, 440 V, 50 Hz- 02 Nos. [vi] 5 kVAr- 02 STEPS [a] 25 A, 415, Ics = 100% Icu = 36 kA, 50 Hz TP MCCB with fixed magnetic settings and adjustable thermal settings- 02 Nos. [b] 3P, 5 kVAr power contactor (capacitor duty), 415 V, 50 Hz 230 VAC coil- 02 Nos. [c] 7% detuned reactor, 3- Ph, 5 kVAr, 440 V, 50 Hz- 02 Nos. NOTES: [i] The APFC Panel shall be sourced directly from the OEM only. [ii] The APFC Relay shall be of Schneider, L & T, Seimens or Beluk make only. [iii] The APFC Panel shall have 10% extra space for future expansion. [iv] The bidder shall furnish dimensional drawings of the items offered indicating all the fittings, dimensional tolerances, GADs, etc. for approval of the Engineer-in-Charge.

M & L for 1.1 kV grade 3 core 25 mm2, copper conductor, XLPE insulated armoured cable conforming to IS 7098 (Part 1): 1988, having stranded copper compact shaped conductors as per Cl. 2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanised steel strip/wire and PVC Type ST-2 outer sheath conforming to IS 5831: 1984, including necessary clamping / dressing with cable ties and termination complete all as specified and directed by engineer-in-charge. Make: Havells, Polycab, RR Kabel

S & F of 100 mm X 50 mm X 1.6 mm (L X D X T) size of perforated painted with powder coating MS cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with MS suspenders including bolts, etc. complete all as specified and directed by the engineer-in-charge. Make: Elcon, Aravali Engineers, Grent

M & L for earthing complete with GI earth plate electrode of 60 cm x 60 cm x 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strip of size 32x6 mm as earth lead, by means of bolts, buts, check nuts and washers of galvanised iron or steel, galvanized iron pipe of 40 mm diameter, connected to earthing test point, all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. complete all as specified and directed by the engineer-in-charge. (Ext Electrification- 12, External Water Supply - 02, Treated Water Supply - 02)

TREATED WATER SUPPLY

M & L for ASTM (uPVC) D 1785 / Sch 80 pipe, conforming to IS 4985: 2000, with all fittings laid in trenches complete all as specified and directed by the engineer-in-charge. Make: Astral, Precision, Finolex

a) 100 mm NB

b) 80 mm NB

M & L for ASTM (uPVC) D 1785 / Sch 80 pipe, conforming to IS 4985: 2000, with all fittings laid in trenches complete all as specified and directed by the engineer-in-charge. Make: Astral, Precision, Finolex

a) 150 mm NB

b) 100 mm NB

c) 80 mm NB

d) 50 mm NB

M & L for PN 1.0 rated 150 mm NB swing type foot valve cum strainer, conforming to IS 4038: 1986, suitable for vertical installation and having cast iron body, guide & strainer, soft grade iron plunger, SS spring, bronze seat ring, CS fasteners, flange drilling standard end connection and accessories complete all as specified and directed by the engineer-in-charge. Make: Kirloskar, Normex, Flomatic

M & L for PN 1.0 rated 80 mm NB swing check type reflux (non return) valve, conforming to IS 5312 (Part 1): 2004, having cast iron body, door & diaphragm, Leaded Tin Bronze seat rings, SS hinge pin, flange drilling standard end connection and accessories complete all as specified and directed by the engineer-in-charge. Make: Kirloskar, Leader, Venus

Supply, installation, testing and commissioning of automatic air-vent valve with 20 mm end connections, brass OT 58 body and cover, polyacetal lever, high density expanded polyethylene float, EPDM rubber plug, stainless steel spring, polyamide cap etc. suitable for maximum operating pressure of 16 bar and maximum operating temperature 115 °C respectively, installed on all high points in the water piping system to automatically remove the trapped air complete all as specified and directed by the engineer-in-charge. Make: Sant, Leader, Venus

S & F of Woltman type (removable mechanism) water meter of size 100 mm NB conforming to Class B of ISO-406-1, having magnetic drive with flange ends, hermatically sealed register, leak proof and sealed totaliser protected by metallic cover, reliable sensitive metrology and low pressure loss, suitable to measure minimum flow 1.8 m3/hr, transitional flow 12 m3/hr, nominal flow 60 m3/hr and maximum flow 120 m3/hr with minimum reading 0.02 m3 and maximum reading 9999999 m3, ±5% accuracy, temperature suitability 45 °C, test pressure 20 kg/cm2, etc. complete all as specified and directed by the engineer-in-charge. Make: Kranti, K Flow, Aquamet

Supply, installation, testing and commissioning of horizontal split-casing two stage single suction pump of capacity 5 litre/s at 140 mWC head for treated (flushing) water supply (2W + 2S) conforming to IS 6595 (Part 2): 1993 and having horizontal axially split volute type CI delivery casing, suction and discharge nozzles and supporting feet cast integral with lower half casing, enclosed balanced bronze impeller, high tensile steel (CS) shaft supported by antifriction bearing and protected by bronze shaft sleeves in stuffing box area sealed by mechanical seal, deep groove ball / roller bearing, standard drilling flanges etc. suitable for direct coupling with TEFC squirrel cage induction motor suitable for operation on 3-Ph, 415 V±10%, 50 Hz AC supply and conforming to IS 12615: 2018, base plate, mounting channel frame, accessories and fittings, viz. pressure gauge, drain, coupling, coupling guard, vibration isolation arrangement by means of spring / rubber type mounting and foundation as per manufacturer's recommendation complete all as specified and directed by the engineer-in-charge. Make: Kirloskar, CRI, Crompton Greaves NOTE: Necessary civil work viz. foundation for placement of pump and pump accessories shall be covered in the scope of work.

Supply, installation, testing and commissioning of factory made, CPRI type tested, indoor cubical compartmental type TREATED (FLUSHING) WATER SUPPLY PANEL of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed by engineer-in-charge. Make: L & T, Schneider, Siemens, ABB The Panel shall comprise of the following: [A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 250 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [B] INCOMING [i] 125 A, 415 V, Ics = 100% Icu = 25 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.4 - 1 X In), adjustable short-circuit setting (1.5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload pre-alarm & Overload), etc.- 01 Nos. [ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interrupts- 01 Nos. [iii] LED phase indicators (Red, Yellow, Blue)- 01 Set

[C] OUTGOING [i] 100 A, 415 V, Ics = 100% Icu = 50 kA, 50 Hz TP MCCB, conforming to IEC 60947-2, having MA magnetic trip unit, short circuit protection with an adjustable pick-up Im = (6 to 14 X In) initiating instantaneous tripping if exceeded- 04 Nos. [ii] 3 Pole Power Contactor conforming to IEC 60947-4-1 and having AC-3 rating 95 A, 2 NO + 2 NC auxiliary contacts- 08 Nos. (Main and Delta Contactors) [iii] 3 Pole Power Contactor conforming to IEC 60947-4-1 and having AC-3 rating 50 A, 2 NO + 2 NC auxiliary contacts- 04 Nos. (Star Contactors) [iv] Thermal overload relay, conforming to IEC 60947-4-1, tripping class 10 A and having relay range 14- 20 A- 04 Nos. [v] 32 A, 10 kA, 230 V, 50 Hz FP MCB ('C' curve)- 01 Nos. (for Treated Water Pump House DB) [vi] Cl 1.0 ammeter having 0- 100 A measurement range- 04 Nos. [vii] LED phase indicators (Red, Yellow, Blue)- 04 Set NOTES: [i] The Panel shall be purchased from the original equipment manufacturer (OEM) only. [ii] The bidder shall furnish dimensional drawings of the items offered indicating all the fittings, dimensional tolerances, GADs, etc. for approval of the Engineer-in-Charge.

Supply, installation, testing and commissioning of free-standing indoor semi-compartmentalised cubical type 25 kVAr APFC CAPACITOR BANK made out of 2.0 mm thick CRCA sheet and built upon rigid framework, having MPP type capacitor with 7% aluminium wound reactor units type tested in accordance with IS 16636: 2017 with contactor switching, IP 4X protection and including air system provided by axial flow fan or centrifugal fan, control wiring with FR-LSH copper wires complete as specified and directed by the engineer-in-charge. Make: L & T, Schneider, Siemens The APFC Capacitor Bank shall comprise of the following: [i] 63 A, 415 V, Ics = Icu = 36 kA, 50 Hz, TP MCCB with adjustable overload settings, adjustable short-circuit settings, adjustable earth- fault settings, current limiting type double break roto active type, instantaneous protection and microprocessor based trip unit- 01 Nos. [ii] High performance microprocessor based APFC relay with auto / manual switch option- 01 Nos. [iii] 3- Phase power analyser with in-built digital VAF meter, phase indicating LED lamps (R, Y, B), step indicating LED lamps, ON / OFF push buttons, timer, CT- 320/5 A, Cl1.0, 15 VA- 01 Nos. [iv] MPP capacitor of 25 ( 2 X 12.5) kVAr

[v] 7.5 kVAr- 02 STEPS [a] 32 A, 415, Ics = 100% Icu = 36 kA, 50 Hz TP MCCB with fixed magnetic settings and adjustable thermal settings- 02 Nos. [b] 3P, 7.5 kVAr power contactor (capacitor duty), 415 V, 50 Hz 230 VAC coil- 02 Nos. [c] 7% detuned reactor, 3- Ph, 7.5 kVAr, 440 V, 50 Hz- 02 Nos. [vi] 5 kVAr- 02 STEPS [a] 25 A, 415, Ics = 100% Icu = 36 kA, 50 Hz TP MCCB with fixed magnetic settings and adjustable thermal settings- 02 Nos. [b] 3P, 5 kVAr power contactor (capacitor duty), 415 V, 50 Hz 230 VAC coil- 02 Nos. [c] 7% detuned reactor, 3- Ph, 5 kVAr, 440 V, 50 Hz- 02 Nos. NOTES: [i] The APFC Panel shall be sourced directly from the OEM only. [ii] The APFC Relay shall be of Schneider, L & T, Seimens or Beluk make only. [iii] The APFC Panel shall have 10% extra space for future expansion. [iv] The bidder shall furnish dimensional drawings of the items offered indicating all the fittings, dimensional tolerances, GADs, etc. for approval of the Engineer-in-Charge.

M & L for 1.1 kV grade 3 core 16 mm2, copper conductor, XLPE insulated armoured cable conforming to IS 7098 (Part 1): 1988, having stranded copper compact shaped conductors as per Cl. 2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanised steel strip/wire and PVC Type ST-2 outer sheath conforming to IS 5831: 1984, including necessary clamping / dressing with cable ties and termination complete all as specified and directed by engineer-in-charge. Make: Havells, Polycab, RR Kabel

S & F of 100 mm X 50 mm X 1.6 mm (L X D X T) size of perforated painted with powder coating MS cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with MS suspenders including bolts, etc. complete all as specified and directed by the engineer-in-charge. Make: Elcon, Aravali Engineers, Grent

FIREFIGHTING

Supply, installation, testing and commissioning of FM approved and UL listed microprocessor- based, true peer-to-peer networkable, 6 loop (extendable up to 10 loops) addressable Fire Alarm Control Panel (FACP) with its own microcontroller memory, communication module, fire device loop interface cards for intelligent initiating and indicating devices and peer-to-peer networkable with other addressable fire alarm panels. conforming to UL 2572 mass notification systems & NFPA 72, with required accessories complete all as specified and directed by the engineer-in-charge. Make: Notifier NFS 3030 + DVC or equivalent model of JC, Esser The FACP shall meet the following specifications / functional requirements. [i] The FACP shall have one to ten isolated intelligent Signalling Line Circuits (SLCs) capable of connecting up to 159 detectors and 159 modules per SLC or 318 devices per loop. [ii] The FACP shall have a degrade mode and the loops shall work in degrade mode in case of the CPU failure. [iii] The FACP shall have 640 character LCD backlit display/ Touch Screen display, full QWETRY program keypad, LED indicators viz. power; fire alarm; supervisory; system trouble; other event; signals silenced; point disabled; CPU failure; controls active; etc. membrane switch controls viz. acknowledge; signal silence; drill; system reset; lamp test; etc. [iv] The FACP shall have four access levels, flash EPROM, 240 VAC power supply, automatic battery charger, 24 V sealed lead acid batteries, sufficient for 24 hrs normal working and 30 min in alarm condition. [v] The FACP shall have manual sensitivity adjustment up to nine levels, built-in alarm; trouble; security and supervisory relays, history file with 4000-event capacity in non-volatile memory plus separate 1000-event alarm-only file, keypad operation, LCD unit to indicate fire / fault signal of individual unit, in built printer to log all incoming data, etc.

[vi] The FACP shall have integrated 8 channel digital voice evacuation system controller capable of broadcasting evacuation messages on the same peer-to-peer network, fire fighter's telephone two-way communication system capable of supervising all the speaker circuits with adequate zone control and accessories etc. NOTES: [i] The FACP shall be servicable by any system integrator & shall not have dependency on specific system integrator. [ii] The FACP shall have feature to "ADD", "EDIT" & "DELETE" field devices like detectors & modules without dependency on PC / Software / Special tool / dongle.

Supply, installation, testing and commissioning of FM approved and UL listed Network Control Display (NCD) capable of full supervision of all inputs and network integrity, having10" high definition 1024 X 600 colour touchscreen display, environmental adjustment controls to maximize LCD legibility, LED status indicators (for power supply and off normal condition), network connection, three USB connections, trouble relay, tamper and trouble inputs, etc. and features viz. network-wide acknowledge silence, reset, lamp test, fully programmable node-mapping subsystem, colour coded icon based event notification, event vectoring, etc. along with UL listed non-resettable 24 VDC power source complete all as specified and directed by the engineer-in-charge. Make: Notifier NCD or equivalent model of JC, Esser

Supply, installation, testing and commissioning of FM approved and UL listed intelligent plug-in photoelectric smoke detector, conforming to UL 268 7th Edition, sealed against back pressure, with sensitivity range 0.5 % to 4.0 % per foot obscuration, two-wire SLC connection, fixed-temperature setpoint 135°F (57°C), built-in functional test switch activated by external magnet, built-in tamper resistant feature, remote test feature from the panel, dual LED design providing 360° viewing angle, visible bi-colour LEDs blink green every time the detector is addressed, and illuminate steady red on alarm, compatible with FlashScan® and CLIP protocol systems, Rotary, decimal addressing, etc. and having the ability to combine temperature thermal sensing with optical sensing, complete with all accessories viz. base, base box, etc. to be installed below / above false ceiling, roof and concealed space, etc. complete all as specified and directed by the engineer-in-charge. Make: Notifier FSP-951T + B501 or equivalent of JC, Esser

Supply, installation, testing and commissioning of FM approved and UL listed intelligent plug-in intelligent thermal detector, two-wire SLC connection, fixed-temperature setpoint 135 °F (57 °C), rate of temperature rise 15 °F (8.3 °C) per minute, built-in functional test switch activated by external magnet, built-in tamper resistant feature, remote test feature from the panel, dual LED design providing 360° viewing angle, visible bi-colour LEDs blink green every time the detector is addressed, and illuminate steady red on alarm, compatible with FlashScan® and CLIP protocol systems, rotary & decimal addressing, etc. complete with all accessories viz. base, base box, etc. to be installed below / above false ceiling, roof and concealed space, etc. complete all as specified and directed by the engineer-in-charge. Make: Notifier FSP-951R + B501 or equivalent of JC, Esser

S & F plug-in gas leak detector to provide an early warning for LPG or CNG / PNG gas leakage from cylinders or through pipelines calibrated to give an alarm at about 2000 ppm along with separate heat and gas sensors with LEDs, audible buzzer alarm, etc. complete all as specified and directed by the engineer-in-charge. Make: Honeywell, System Sensor, Agni

S & F flush / ceiling wall mounted remote response indicator to duplicate detector alarm latching LED(s), compatible for two wire detectors, having 12 VDC operating voltage, dual LEDs for 360⁰ visibility in case the detector is placed above the false ceiling / inside closed room complete all as specified and directed by the engineer-in-charge. Make: Honeywell, System Sensor, Agni

Supply, installation, testing and commissioning of FM approved and UL listed intelligent monitor module, with built-in type identification automatically identifying the device as a monitor module to the FACP, to supervise a circuit of dry-contact input devices, viz. flow switch of sprinkler line, powered directly by two-wire SLC loop, high noise immunity, SEMS screws with clamping plates for ease of wiring, direct-dial entry of addresses, LED indicators, etc. complete all as specified and directed by engineer-in-charge. Make: Notifier FMM-1 or equivalent model of JC, Esser

Supply, installation, testing and commissioning of FM approved and UL listed addressable control module to provide FACP a circuit for notification appliances (e.g. Horns, Strobes, Horn Strobes, etc.) having built-in type identification, integral LED indicators, high noise immunity, SMES screws with clamping plates for wiring ease, direct-dial entry of address, etc. complete all as specified and directed by engineer-in-charge. Make: Notifier FCM-1 or equivalent model of JC, Esser

Supply, installation, testing and commissioning of FM approved and UL listed addressable relay module to provide FACP a dry-contact output for activating a variety of auxiliary devices, viz. fans, dampers, control equipment, etc. having built-in type identification, integral LED indicators, high noise immunity, SMES screws with clamping plates for wiring ease, direct-dial entry of address, etc. complete all as specified and directed by engineer-in-charge. Make: Notifier FRM-1 or equivalent model of JC, Esser

Supply, installation, testing and commissioning of UL listed of Horn Strobe, wired as a primary notification appliance, flashing 75 cd at 1 Hz over the strobe's entire operating voltage range, xenon flash tube and associated lens / reflector system, built-in synchronization feature keeping strobes in sync for up to 30 minutes, horn producing audible annunciation of 75 dBA at 3 m distance complete all as specified and directed by engineer-in-charge. Make: Notifier SYS-HS or equivalent model of JC, Esser

Supply, installation, testing and commissioning of UL listed (fire fighter's) addressable Telephone Jack mounted to a single-gang electrical back box with suitable interface module for two way communication with the Central Fire Fighter Telephone Console complete all as specified and directed by engineer-in-charge. Make: Notifier FPJ + FCM-1 or equivalent model of JC, Esser

Supply, installation, testing and commissioning of UL listed Fire Fighter's Telephone Handset for two way communication with the Central Fire Fighter Telephone Console complete all as specified and directed by engineer-in-charge. Make: Notifier FHS or equivalent model of JC, Esser

M & L for low smoke zero halogen (LS0H) flame retardant fire alarm cable, conforming to BS 7629-1, BS 6387 & BS EN 50200 and rated for 500 V, drawn through concealed PVC conduit and having plain annealed stranded copper conductor with primary insulation of glass mica fire resistant tape and secondary insulation of high performance silicone rubber, earth/drain wire of annealed tinned copper, electrostatic screen of aluminium fire barrier and type LTS3 outer sheath conforming to BS 7655, suitable for operating temperature range -30 ˚C to +70 ˚C and minimum bending radius being 6 times the overall cable diameter, RED in colour, including laying, termination and ferruling complete all as specified and directed by engineer-in-charge. Make: RR Kabel, Havells or Polycab

A) 2 core, 1.5 mm²

B) 2 core, 2.5 mm² (supply to hooter/strobe)

M & L for transparent FR PVC insulated, twin core copper conductor flexible industrial Speaker cable having stranded annealed tinned copper conductor, PVC insulated cores twisted to form pairs, shielded for interference rejection, unarmoured PVC sheathed 1.1 kV grade in conductor size 2 X 1.0 mm2 including laying, termination and ferruling complete all as specified and directed by engineer-in-charge. Make: RR Kabel, Polycab, Havells

Supply, installation, testing and commissioning of UL listed all purpose 2 W ceiling speaker having crush and rust resistant design and fully ABS plastic & ABS grille with tap-setting range between 1/4 W and 2 W, rated (RMS) voltage 70.7 V, sound pressure level at 1 W (1 m & 1 kHz) 80 ± 4 dB, frequency response 125 Hz- 16 kHz, (-10 dB with reference to 1 kHz), complete all as specified and directed by engineer-in-charge. Make: Notifier NF-SP100CI/UL or equivalent model of JC, Esser

Supply, installation, testing and commissioning of UL listed Digital Audio Amplifier capable of accessing and processing one of up to eight audio channels on the DVC audio loop, amplifying the signal and distributing it via eight Class B (speaker line) outputs having two wire digital audio ports to connect to wire DAL (digital audio loop) segments, Firefighter telephone riser supporting 7 active firefighter telephones, 300 W total output at 70 V (RMS) complete all as specified and directed by engineer-in-charge. Make: Notifier DS-DB + DS-AMPE or equivalent of JC, Esser

M & L for low smoke zero halogen (LS0H) fire survival control cable with circuit integrity, conforming to BS 7846 and rated for 600 V, having plain annealed stranded copper conductor with fire-resistant mica tapes covered by an extruded layer of cross-linked polyethylene, extruded layer of thermoplastic low smoke zero halogen (LS0H) compound, single layer of galvanized steel wires and thermoplastic LS0H compound sheath, suitable for operating temperature range -40 ˚C to +90 ˚C and minimum bending radius being 12 times the overall cable diameter, including laying, clamping, termination and ferruling complete as specified and directed by the engineer-in-charge. Make: Havells, Polycab, Finolex, RR Kabel

A) 2 core, 2.5 mm² (for instrumentation)

B) 3 core, 2.5 mm² (for auto start/stop panel)

C) 12 core, 2.5 mm² (for diesel engine pump)

M & L for 1.1 kV grade copper conductor, XLPE insulated armoured cable conforming to IS 7098 (Part 1): 1988, having stranded copper compact shaped conductors as per Cl. 2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanised steel strip/wire and PVC Type ST-2 outer sheath conforming to IS 5831: 1984, including necessary clamping / dressing with cable ties and termination complete all as specified and directed by engineer-in-charge. Make: Havells, Polycab, Finolex, RR Kabel

A) 3 core 150 mm² (for electric motor driven main fire pump)

B) 4 core 25 mm² (for fire lift)

C) 3 core 16 mm² (for booster pump)

D) 3 core 10 mm² (for jockey pump)

S & F of 100 mm X 50 mm X 1.6 mm (L X D X T) size of perforated painted with powder coating MS cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with MS suspenders including bolts, etc. complete all as specified and directed by the engineer-in-charge. Make: Elcon, Aravali Engineers, Grent

M & L for ASTM (uPVC) D 1785 / Sch 80 pipe, conforming to IS 4985: 2000, with all fittings fixed to walls and ceilings or laid in floors complete as specified and directed by the engineer-in-charge. Make: Astral, Precision, Finolex NOTES: [i] All hangers, clamps, brackets etc. shall be of galvanized iron. [iii] Welding of any kind on the galvanised support / hanger shall not be permitted.

A) 32 mm NB

B) 25 mm NB

M & L for PN 1.6 rated 200 mm NB polypropylene vortex inhibitor suction lift, conforming to BS 4504 with stainless wire mesh, bolts, nuts and washers, etc. complete all as specified and directed by the engineer-in-charge. Make: Tyco, Associated Enterprise, HD

S & F of PN 1.6 rated, two piece design, quarter turn, lever operated brass ball valve having nickel-plated forged brass body & end connector, brass chrome plated ball, PTFE body seat ring & packing, H.T. brass stem, nut & gland, rubber 'O' ring, powder coated MS lever and screwed female ends, etc. with accessories complete as specified and directed by the engineer-in-charge. Make: Leader, Sant, Venus

S & F indoor type lockable wall-mounted hose cabinet made of 18 gauge MS sheet of size 800 mm X 600 mm X 250 mm having double door with 3 mm thick glass and door frame made of 16 gauge MS sheet painted two coats of fire red outside and brilliant white inside over a coat of primer suitable to house two sets of hose RRL hose (15 m length) and gunmetal branch pipe complete as specified and directed by the engineer-in-charge. Make: Newage, AAAG, Minimax

M & L for FM approved and UL listed 25 mm NB compact 3 position ball valve with drain orifice (test and drain valve) to test and drain water flow through sprinkler systems having OFF-TEST-DRAIN position, integral sight glass, rated pressure 300 psi, orifice size 15 mm and K factor 5.6, conforming to NFPA 13, along with necessary accessories complete as specified and directed by the engineer-in-charge. Make: Tyco, HD, Viking

S & F of orifice plate made out of 6 mm thick SS 304 with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as specified and directed by the engineer-in-charge. Make: Newage, AAAG, Minimax

Supply, installation, testing and commissioning of 2- way fire brigade draw- off connection with two 63 mm NB inbuilt gunmetal non-return valves instantaneous coupling type arranged on 100 mm NB pipe manifold and connected to wet riser main as well as to fire water tank including CI butterfly valve, CI non-return valve and MS cabinet with mounting supports, etc. all complete as specified and directed by the engineer-in-charge. Make: Newage, AAAG, Minimax

S & F 4 kg capacity dry chemical powder (ABC) type fire extinguisher, conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted in gunmetal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket / floor trolley mounting accessories along with suitable signage, etc. complete all as specified and directed by the engineer-in-charge. Make: Safex, Agni, Ceasefire

S & F of 3 kg light-weight squeeze grip CO2 type fire extinguisher, conforming to IS 15683: 2006, with CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel with wheel type valve, discharge nozzle, bend & horn, wall mounting bracket / floor trolley mounting accessories along with suitable signage complete all as specified and directed by the engineer-in-charge. Make: Safex, Agni, Ceasefire

S & F of 9 litre mechanical foam type fire extinguisher, conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted with gunmetal union, high pressure CO2 gas cartridge, hose and ABS type branch pipe and wall mounting bracket / floor trolley mounting accessories along with suitable signage complete all as specified and directed by the engineer-in-charge. Make: Safex, Agni, Ceasefire

S & F of the following type of signages made out of 3 mm thick opaque PVC foam board with computer cut, PVC non-reflective self adhesive vinyl painted foam board, complete with mirror fasteners as specified and directed by the engineer-in-charge.

a) Sign of size 250 mm X 300 mm reading 'IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE' in 12.5 mm block letters in red and white background, properly spaced to provide good legibility located directly above the call-button and squarely attached to the wall or partition in a way that the top of the sign is not above 2 m from the finished floor level

b) Sign of size 150 mm X 600 mm, posted and maintained within each stair enclosure on every floor, indicating the number of the floor in bold type and at 75 mm high numerals in red and white background, securely attached to the stair side of the door in a way that the bottom of the sign is not above 1.5 m from the finished floor level

c) Sign of size 150 mm X 600 mm, posted and maintained at each lift landing and on the side of the stairway door from which egress is to be made on every floor, indicating the lift / lift bank / stairway by an alphabetical letter in bold type and at 75 mm high letters in red and white background, securely attached to the side of the stairway door from which egress is to be made in a way that the bottom of the sign is not above 1.5 m from the finished floor level

M & L for Construction of fly-ash brick masonry valve chamber of size 1000 mm X 800 mm X 1000 mm (internal dimensions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate, 150 mm thick & 150 mm wide offsets around over 100 mm thick hardcore , 200 mm thick fly-ash brick masonry walls built in CM 1:6, 100 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in hard/dense soil 6 mm thick MS sheet cover fixed on 25 mm X 25 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC cooping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc. complete as specified and directed by the engineer-in-charge.

M & L for earthing complete with galvanized steel earth plate electrode of 60 cm X 60 cm X 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized strip of size 32 mm X 6 mm as earth lead by means of bolts, nuts, checknuts and washers of galvanized iron or steel, galvanized iron pipe of 40 mm diameter connected to earthing test point, all as shown in electrical plate No. 5, connected to earthing test point including testing on completion, excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep with a 10 mm deep CI cover hinged to CI frame on ground level, GI watering pipe, funnel, etc. complete as specified and directed by the engineer-in-charge. ( firefighting - 04, external water supply - 02, treated water supply - 02, DG Set - 06 )

M & L for earthing complete with galvanized steel earth plate electrode of 60 cm X 60 cm X 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized strip of size 25 mm X 4 mm as earth lead by means of bolts, nuts, checknuts and washers of galvanized iron or steel, galvanized iron pipe of 40 mm diameter connected to earthing test point, all as shown in electrical plate No. 5, connected to earthing test point including testing on completion, excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep with a 10 mm deep CI cover hinged to CI frame on ground level, GI watering pipe, funnel, etc. complete as specified and directed by the engineer-in-charge.

LIFTS

Design supply, installation, testing & commissioning of Passengers lift, conforming to IS 14665-1: 2000 and IS 14665-2-1 & 2: 2000, suitable for 13 passengers / 884 kg rated load & 2.5 m/s car speed, single speed motor suitable for 3- Ph, 415 V, 50 Hz electric power supply to serve B + 31 upper floors with AC variable voltage & variable frequency regenerative drive (VVVF regenerative drive) and complete with all standard accessories, fully automatic group control operations with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD), false ceiling, infrared door protection system, CCTV inside the elevator car, Voice Synthesizer with MP3 for announcements of floor positions and other features complete all as specified and directed by the engineer-in-charge. Make: Otis, Schindler, Mitsubishi, Thyssenkrupp, Toshiba Johnson The lift shall conform to the following technical specification. [i] Type of Lift: Passengers Lift [ii] Load Capacity: 884 kg / 13 Passenger [iii] Speed: 2.5 m/s with single speed motor [iv] Power Supply: 3- Phase, 4 Wire, 415 V, 50 Hz AC [v] Type of Drive: VVVF Regenerative Drive (Variable Voltage and Variable Frequency Regenerative Drive) [vi] Type of Machine: Gearless [vii] Car Size: Not less than 2.06 m² [viii] Car & Landing Door at all Floors: Automatic center opening with VVVF door drive, opening size not less than 900 mm X 2000 mm, sliding type, fabricated by stainless steel sheet not less than 16 gauge having hairline finish (N-304)

[ix] Car Enclosure: Manufactured with stainless steel frame not less than 16 gauge with hairline finish (N-304) having stainless false ceiling with hairline finish, internal lighting arrangement with LED light fittings with auto cut-off system operated on commercial supply and one LED light fitting operated on battery with invertor as emergency light, complete internal ventilation system provided with concealed axial/cross flow fan with auto cut-off system and stainless steel grill / wiremesh for protection [x] Handrail: Standard thickness 40 mm diameter stainless steel hand-rail all around inside the car cabin [xi] Terminal Buffers: Metal special spring/PU/Oil buffers as per manufacturer specifications. The buffing stroke shall not be less than 200 mm. [xii] Door Opening (Inside): Centre opening stainless steel doors with hairline finish doors with clear opening of 900 mm X 2000 mm and protected by infrared door protection system [xiii] Car & Counter Weight Guide: Guide rails of MS 'T' section as per OEM design; counter weight shall be as recommended by OEM [xiv] Flooring: 5 mm thick Aluminium chequered plate / as per OEM design [xv] Signals: [a] Combined luminous hall buttons with LED / LCD hall position indicators of stainless steel at all floors [b] LED / LCD car position indicators of stainless steel [c] Car operating panel of stainless steel with luminous buttons in car [d] Car direction indicator in car & landing [e] Battery operated alarm bell & emergency light (rechargeable) along with suitable maintenance free battery (This system shall be separate from ARD batteries.) [f] Overload warning feature in car cabin (display and announcing type both) [g] One fireman's switch to be installed at ground floor near landing door

[h] All signal fixture & car operating panel on hairline stainless steel face plate with hairline finish. [i] Infrared door sensor safety edge of door for entire height. [j] Voice Synthesizer with MP3: MP3 based Voice Synthesizer consisting of electronic PCB enclosed in a PVC (IP 54) Box to be fitted in the controller and speaker unit to be mounted on the ceiling of the car for announcements of floor positions and other features like door opening, Overload, ARD, power failure, etc. [xvi] Stops & Opening:32-32 All opening on same side. [xvii] Safety Device: [a] Automatic rescue device (ARD) / automatic landing device operating with maintenance-free batteries having suitable capacity. The batteries shall have auto charging facilities. The charger input shall be connected with converter of regenerative drive.[b] The ARD actuation time shall be less than one second after failure of power supply and when ARD is operative the car shall stop at the nearest floor and then open. [xviii] Operation: Fully automatic group control operations with and without attendant. [xix] Machine room: Located above the hoist way. Details as per building drawing(s). [xx] Hoist way construction details as per building drawing(s). [xxi] Civil work: Necessary Civil work viz. making good disturbed surfaces, modification to landing space to suit to car size, necessary foundation to machine etc. [xxii] One wall mounted type telephone instrument installed inside car cabin along with fixing arrangement and telephone cable of suitable size from car cabin to machine room run along with travelling cable. The telephone instrument shall be connected in the telephone DB installed in the machine room. [xxiii] Mirror of suitable size to be provided above SS railing on the wall opposite to Centre opening stainless steel doors.

Design supply, installation, testing & commissioning of Passengers lift, conforming to IS 14665-1: 2000 and IS 14665-2-1 & 2: 2000, suitable for 16 passengers / 1088 kg rated load & 2.5 m/s car speed, single speed motor suitable for 3- Ph, 415 V, 50 Hz electric power supply to serve B + 31 upper floors with AC variable voltage & variable frequency regenerative drive (VVVF regenerative drive) and complete with all standard accessories, fully automatic group control operations with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD), false ceiling, infrared door protection system, CCTV inside the elevator car, Voice Synthesizer with MP3 for announcements of floor positions and other features complete all as specified and directed by the engineer-in-charge. Make: Otis, Schindler, Mitsubishi, Thyssenkrupp, Toshiba Johnson The lift shall conform to the following technical specification. The lift shall conform to the following technical specification. [i] Type of Lift: Passengers Lift [ii] Load Capacity: 1088 kg / 16 Passenger [iii] Speed: 2.5 m/s with single speed motor [iv] Power Supply: 3- Phase, 4 Wire, 415 V, 50 Hz AC [v] Type of Drive: VVVF Regenerative Drive (Variable Voltage and Variable Frequency Regenerative Drive) [vi] Type of Machine: Gearless [vii] Car Size: Not less than 2.48 m² [viii] Car & Landing Door at all Floors: Automatic center opening with VVVF door drive, opening size not less than 900 mm X 2000 mm, sliding type, fabricated by stainless steel sheet not less than 16 gauge having hairline finish (N-304)

[ix] Car Enclosure: Manufactured with stainless steel frame not less than 16 gauge with hairline finish (N-304) having stainless false ceiling with hairline finish, internal lighting arrangement with LED light fittings with auto cut-off system operated on commercial supply and one LED light fitting operated on battery with invertor as emergency light, complete internal ventilation system provided with concealed axial/cross flow fan with auto cut-off system and stainless steel grill / wiremesh for protection [x] Handrail: Standard thickness 40 mm diameter stainless steel hand-rail all around inside the car cabin [xi] Terminal Buffers: Metal special spring/PU/Oil buffers as per manufacturer specifications. The buffing stroke shall not be less than 200 mm. [xii] Door Opening (Inside): Centre opening stainless steel doors with hairline finish doors with clear opening of 1000 mm X 2100 mm and protected by infrared door protection system [xiii] Car & Counter Weight Guide: Guide rails of MS 'T' section as per OEM design; counter weight shall be as recommended by OEM [xiv] Flooring: 5 mm thick Aluminium chequered plate / as per OEM design [xv] Signals: [a] Combined luminous hall buttons with LED / LCD hall position indicators of stainless steel at all floors [b] LED / LCD car position indicators of stainless steel [c] Car operating panel of stainless steel with luminous buttons in car [d] Car direction indicator in car & landing [e] Battery operated alarm bell & emergency light (rechargeable) along with suitable maintenance free battery (This system shall be separate from ARD batteries.) [f] Overload warning feature in car cabin (display and announcing type both) [g] One fireman's switch to be installed at ground floor near landing door

[h] All signal fixture & car operating panel on hairline stainless steel face plate with hairline finish. [i] Infrared door sensor safety edge of door for entire height. [j] Voice Synthesizer with MP3: MP3 based Voice Synthesizer consisting of electronic PCB enclosed in a PVC (IP 54) Box to be fitted in the controller and speaker unit to be mounted on the ceiling of the car for announcements of floor positions and other features like door opening, Overload, ARD, power failure, etc. [xvi] Stops & Opening:32-32 All opening on same side. [xvii] Safety Device: [a] Automatic rescue device (ARD) / automatic landing device operating with maintenance-free batteries having suitable capacity. The batteries shall have auto charging facilities. The charger input shall be connected with converter of regenerative drive. [b] The ARD actuation time shall be less than one second after failure of power supply and when ARD is operative the car shall stop at the nearest floor and then open. [xviii] Operation: Fully automatic group control operations with and without attendant. [xix] Machine room: Located above the hoist way. Details as per building drawing(s). [xx] Hoist way construction details as per building drawing(s). [xxi] Civil work: Necessary Civil work viz. making good disturbed surfaces, modification to landing space to suit to car size, necessary foundation to machine etc.

[xxii] One wall mounted type telephone instrument installed inside car cabin along with fixing arrangement and telephone cable of suitable size from car cabin to machine room run along with travelling cable. The telephone instrument shall be connected in the telephone DB installed in the machine room. [xxiii] Mirror of suitable size to be provided above SS railing on the wall opposite to Centre opening stainless steel doors. NOTES: [i] Fully automatic group control operations with and without attendant shall be configured / programmed for the lift banks in each block. [ii] A bank of 03 lifts viz. 02 passenger lifts of 13 pax / 884 kg rated load and 01 goods lift of 16 pax / 1088 kg rated load shall be configured / programmed for fully automatic group control of the lift bank in each block. [iii] A bank of 02 passenger lifts of 16 pax / 1088 kg rated load shall be configured / programmed for fully automatic group control of the lift bank in each block.

Design supply, installation, testing & commissioning of Passengers lift (Fire lift), conforming to IS 14665-1: 2000 and IS 14665-2-1 & 2: 2000, suitable for 16 passengers / 1088 kg rated load & 2.5 m/s car speed, single speed motor suitable for 3- Ph, 415 V, 50 Hz electric power supply to serve B + 31 upper floors with AC variable voltage & variable frequency regenerative drive (VVVF regenerative drive) and complete with all standard accessories, fully automatic group control operations with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD), false ceiling, infrared door protection system, CCTV inside the elevator car, Voice Synthesizer with MP3 for announcements of floor positions and other features complete all as specified and directed by the engineer-in-charge. Make: Otis, Schindler, Mitsubishi, Thyssenkrupp, Toshiba Johnson The lift shall conform to the following technical specification. The lift shall conform to the following technical specification. [i] Type of Lift: Passengers Lift (Fire Lift) [ii] Load Capacity: 1088 kg / 16 Passenger [iii] Speed: 2.5 m/s with single speed motor [iv] Power Supply: 3- Phase, 4 Wire, 415 V, 50 Hz AC [v] Type of Drive: VVVF Regenerative Drive (Variable Voltage and Variable Frequency Regenerative Drive) [vi] Type of Machine: Gearless [vii] Car Size: Not less than 2.48 m² [viii] Car & Landing Door at all Floors: Automatic center opening with VVVF door drive, opening size not less than 900 mm X 2000 mm, sliding type, fabricated by stainless steel sheet not less than 16 gauge having hairline finish (N-304)

[ix] Car Enclosure: Manufactured with stainless steel frame not less than 16 gauge with hairline finish (N-304) having stainless false ceiling with hairline finish, internal lighting arrangement with LED light fittings with auto cut-off system operated on commercial supply and one LED light fitting operated on battery with invertor as emergency light, complete internal ventilation system provided with concealed axial/cross flow fan with auto cut-off system and stainless steel grill / wiremesh for protection [x] Handrail: Standard thickness 40 mm diameter stainless steel hand-rail all around inside the car cabin [xi] Terminal Buffers: Metal special spring/PU/Oil buffers as per manufacturer specifications. The buffing stroke shall not be less than 200 mm. [xii] Door Opening (Inside): Centre opening stainless steel doors with hairline finish doors with clear opening of 900 mm X 2000 mm and protected by infrared door protection system [xiii] Car & Counter Weight Guide: Guide rails of MS 'T' section as per OEM design; counter weight shall be as recommended by OEM [xiv] Flooring: 5 mm thick Aluminium chequered plate / as per OEM design [xv] Signals: [a] Combined luminous hall buttons with LED / LCD hall position indicators of stainless steel at all floors [b] LED / LCD car position indicators of stainless steel [c] Car operating panel of stainless steel with luminous buttons in car [d] Car direction indicator in car & landing [e] Battery operated alarm bell & emergency light (rechargeable) along with suitable maintenance free battery (This system shall be separate from ARD batteries.) [f] Overload warning feature in car cabin (display and announcing type both) [g] One fireman's switch to be installed at ground floor near landing door

[h] All signal fixture & car operating panel on hairline stainless steel face plate with hairline finish. [i] Infrared door sensor safety edge of door for entire height. [j] Voice Synthesizer with MP3: MP3 based Voice Synthesizer consisting of electronic PCB enclosed in a PVC (IP 54) Box to be fitted in the controller and speaker unit to be mounted on the ceiling of the car for announcements of floor positions and other features like door opening, Overload, ARD, power failure, etc. [xvi] Stops & Opening:32-32 All opening on same side. [xvii] Safety Device: [a] Automatic rescue device (ARD) / automatic landing device operating with maintenance-free batteries having suitable capacity. The batteries shall have auto charging facilities. The charger input shall be connected with converter of regenerative drive. [b] The ARD actuation time shall be less than one second after failure of power supply and when ARD is operative the car shall stop at the nearest floor and then open. [xviii] Operation: Simplex, full collective automatic operation with and without attendant. [xix] Machine room: Located above the hoist way. Details as per building drawing(s). [xx] Hoist way construction details as per building drawing(s). [xxi] Civil work: Necessary Civil work viz. making good disturbed surfaces, modification to landing space to suit to car size, necessary foundation to machine etc. [xxii] One wall mounted type telephone instrument installed inside car cabin along with fixing arrangement and telephone cable of suitable size from car cabin to machine room run along with travelling cable. The telephone instrument shall be connected in the telephone DB installed in the machine room.

M & L for 1.1 kV grade copper conductor, XLPE insulated armoured cable conforming to IS 7098 (Part 1): 1988, having stranded copper compact shaped conductors as per Cl. 2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanised steel strip/wire and PVC Type ST-2 outer sheath conforming to IS 5831: 1984, including necessary clamping / dressing with cable ties and termination complete all as specified and directed by engineer-in-charge. Make: Havells, Polycab, RR Kabel

a) 4 core 6 mm²

b) 4 core 10 mm²

M & L for earthing complete with copper earth plate electrode of 60 cm x 60 cm x 3.15 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised strip of size 20 mm x 3 mm as earth lead, by means of bolts, buts, check nuts and washers of galvanised iron or steel, galvanized iron pipe of 40 mm diameter, connected to earthing test point, all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. as all specified and directed.

M & L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20 mm X 3 mm copper strip complete as specified and directed by the engineer-in-charge.

AVIATION LIGHTS

S & F LED aviation/obstruction light having intensity > 40 cd, die-cast aluminium body, UV stabilized optical lens for 360◦ illumination, inbuilt on-off photo cells, ERDA type tested and conforming to ICAO/FAA standards, IP 65 rated operating on 90- 270 V, 50 Hz, 1- Ph AC supply complete as specified and directed by the engineer-in-charge. Make: Bajaj Cat-Part No. 110731 BGAV 302 LED or equivalent model of Havells, Wipro

M & L for IS 694: 2010 marked, FIA/TAC approved 2 core, 1.5 mm² stranded copper conductor (as per IS 8130), XLPE insulated, extruded PVC type ST-2 (as per IS: 5831) sheathed, single layer of galvanized steel flat strip armoured cable of 1.1 kV grade, conforming to IS 7098 (Part-2), including cable termination and cable glanding complete as specified and directed by the engineer-in-charge. Make: Polycab, RR Kabel, Havells

S & F 10 A, 230 V, 50 Hz, SPN/DP MCB for AC applications conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters, etc. complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. Make: Schneider, Legrand, L & T

LIGHTENING PROTECTION

S & F of 1 m vertical aluminium air terminal of 15 mm dia., conforming to IS/IEC 62305-1&2: 2010, and tested as per IEC 62561-1&2: 2017 for electrical, mechanical, environmental tests and current withstand capability of 100 kA (class H) all as specified and directed by the engineer-in-charge.

S & F of base for 1 m vertical aluminium air terminal of 15 mm dia., conforming to IS/IEC 62305-1: 2010, tested as per IEC 62561-1&2: 2017 for electrical, mechanical, environmental tests and current withstand capability of 100 kA (class H) all as specified and directed by the engineer-in-charge.

S & F of 25 mm X 3.15 mm aluminium tape conductor, tested for electrical resistivity test, tensile strength, environmental test (salt spray & humidity test) as per IEC 62561-1&2:2017 with fixing accessories all as specified and directed by the engineer-in-charge.

S & F of aluminium square tape clamp, conforming to conforming to IS/IEC 62305-1&2: 2010 for cross connection and T connection of 25 mm X 3.15 mm aluminium tape conductor, tested for electrical resistivity test, tensile strength, environmental test (salt spray & humidity test) and impulse current withstand capacity of 100 kA (class H) as per IEC 62561-1&2:2017 with fixing accessories all as specified and directed by the engineer-in-charge.

S & F of U bolt rebar to cable, conforming to IS/IEC 62305-1&2:2010, tested for environmental test (salt spray & humidity test) and impulse current withstand capacity of 100 kA (class H) as per IEC 62561-1&2:2017 all as specified and directed by the engineer-in-charge.

S & F of 50 mm2 green / yellow PVC insulated stranded copper cable, conforming to IS/IEC 62305-1&2:2010 with terminal lug, each strand of 1.7 mm diameter with fixing accessories all as specified and directed by the engineer-in-charge.

S & F of bi-metallic connector, conforming to IS/IEC 62305-1&2:2010 and tested for environmental test (salt spray & humidity test), contact resistance test and impulse current withstand capacity of 100 kA (class H) as per IEC 62561-1&2:2017 all as specified and directed by the engineer-in-charge.

S & F of moisture inhibiting compound conforming to IS/IEC 62305-1&2: 2010 all as specified and directed by the engineer-in-charge.

S & F of test link, conforming to IS/IEC 62305-1&2: 2010 and tested for environmental test (salt spray & humidity test), contact resistance test, mechanical test and impulse current withstand capacity of 100 kA (class H) as per IEC 62561-1&2:2017 all as specified and directed by the engineer-in-charge.

M & L for maintenance free earthing system, conforming to IEC 62561-1&2: 2017, comprising of 250 micron copper bonded earth rod having 3/4" dia. earth electrode of 3 m length threaded on both ends, inspection pit with polymer lid (rated for load up to 5000 kg) suitable for general to heavy duty, copper road to tape clamp and 25 kg earth enhancing compound, free from carbon and graphite and conductive in nature, capable of accommodating 60% of its volume and having resistivity less than 0.12 Ω m, conforming to IEEE 80-2013 & IS 3043: 2018 for normal soil condition complete with all accessories as specified and directed by engineer-in-charge. NOTES: [i] Length of the earth rod (3 m) shall vary depending upon soil resistivity. [ii] All components of the earthing system shall be tested as per IEC 62561-1&2:2017.

S & F of 25 mm X 3 mm copper tape conductor, tested for electrical resistivity test, tensile strength, environmental test (salt spray & humidity test) as per IEC 62561-1&2:2017 with fixing accessories all as specified and directed by the engineer-in-charge.

S & F of copper square tape clamp, conforming to conforming to IS/IEC 62305-1&2: 2010 for cross connection and T connection of 25 mm X 3 mm copper tape conductor, tested for electrical resistivity test, tensile strength, environmental test (salt spray & humidity test) and impulse current withstand capacity of 100 kA (class H) as per IEC 62561-1&2:2017 with fixing accessories all as specified and directed by the engineer-in-charge.

GEYSER

Supply, installation and commissioning of electric geyser having 25 litres storage capacity, temperature sensitive LED indicators, 5 star rated, shock safe plug, PUF insulation, incoloy glass coated heating element, anode rod, adjustable knob, multi-functional safety valve with IP 4X protection all complete as specified and directed. (for each dwelling unit) Make: Havells Cat-Part No. GHWAMGSIB025 or equivalent model of Racold, AO Smith

TELEPHONE & TV CONDUITS

S & F modular type 1 module RJ 11 telephone socket with shutter complete all as specified and directed by the engineer-in-charge. Make: Legrand Arteor Cat. Part No. 5734 26 or equivalent model of MK or Havells

Supplying & erecting 50 pairs x 0.5 mm dia PVC insulated armoured telephone cable 0.5 sq.mm PVC Sheathed solid tinned copper conductor cable laid in provided trench/ cable tray complete all as specified and directed by the engineer-in-charge. Make: Polycab, RR Kabel, Havells

Supplying & erecting 10 pairs x 0.5 mm dia PVC insulated armoured telephone cable 0.5 sq.mm PVC Sheathed solid tinned copper conductor cable laid in provided trench/ cable tray complete all as specified and directed by the engineer-in-charge. Make: Polycab, RR Kabel, Havells

S & F for 2 pair telephone cable having solid electrolytic annealed bare copper conductor of 0.5 mm nominal diameter with high density polyethylene insulation, paired, polyester taped, nylon rip cord and grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113 C including termination complete all as specified and directed by the engineer-in-charge. Make: Polycab, RR Kabel, Havells

S & F 10 pair telephone krone distribution box with suitable S.S. frame for mounting tag module, Krone module and incorporated in 16 SWG MS box with proper lockable cover. The box should be fixed on wall with suitable fasteners including painting & earthing. This also includes fixing the cable, distribution chart sufficient space for the cables, wires etc. complete all as specified and directed by the engineer-in-charge. Make: Sintex, Hensel, HPL

S & F 50 pair telephone krone distribution box with suitable S.S. frame for mounting tag module, Krone module and incorporated in 16 SWG MS box with proper lockable cover. The box should be fixed on wall with suitable fasteners including painting & earthing. This also includes fixing the cable, distribution chart sufficient space for the cables, wires etc. complete all as specified and directed by the engineer-in-charge. Make: Sintex, Hensel, HPL

S & F 300 pair telephone krone distribution box with suitable S.S. frame for mounting tag module, Krone module and incorporated in 16 SWG MS box with proper lockable cover. The box should be fixed on wall with suitable fasteners including painting & earthing. This also includes fixing the cable, distribution chart sufficient space for the cables, wires etc. complete all as specified and directed by the engineer-in-charge. Make: Sintex, Hensel, HPL

S & F modular type 1 module TV socket complete all as specified and directed by the engineer-in-charge. Make: Legrand Arteor Cat. Part No. 5734 25 or equivalent model of MK or Havells

S & F RG 11 coaxial cable having solid electrolytic grade annealed plain copper central conductor of 1.63mm nominal diameter, gas injected physical polyethylene foam insulated, wrapped with aluminium mylar tape aluminium alloy wire braided, jelly flooded and PVC jacketed including termination complete all as specified and directed by the engineer-in-charge. Make: Polycab, RR Kabel, Havells

S & F RG 6 coaxial cable having solid electrolytic grade annealed plain copper central conductor of 1.02mm nominal diameter, gas injected physical polyethylene foam insulated, wrapped with aluminium mylar tape aluminium alloy wire braided, jelly flooded and PVC jacketed including termination complete all as specified and directed by the engineer-in-charge. Make: Polycab, RR Kabel, Havells

Supply & installation of 08 way splitter box for TV cable termination incl all necessary hardware accessories complete all as specified and directed by the engineer-in-charge.

DG SET

Supply, installation, testing and commissioning of factory assembled silent diesel engine driven generating set, conforming to IS 10002: 1981, capable of giving continuous output of 625 kVA at 0.8 (lagging) power factor and 50 Hz frequency, suitable for 3-Phase, 4 Wire AC system complete with diesel engine of suitable BHP and AC brushless SPDP alternator, conforming to IS 13364: 1992, mounted on a common base frame and coupled through a flexible coupling or close coupled complete with platform, anti-vibration pad, control panel having meters, sound-proof canopy, etc. complete all as specified and directed by the engineer-in-charge. Make: Kirloskar, Cummins, Mahindra The DG Set shall conform to the following specification / criteria: (a) DIESEL ENGINE :12 cylinder, in-line, 4 stroke, radiator cooled engine, conforming to ISO 8528-1: 2005, IEC 60034-1:2017, BS 5514-1:1996 and ISO-1:1996, well designed air handling system with dry pipe, heavy duty, replaceable paper element air cleaner with restriction indicator, air to air after cooling, optimised turbocharger for increased altitude, in-line fuel pump with class H electronic governing, spin on fuel filter, standard integral set-mounted radiator system, designed and tested for 50 °C ambient temperature, full flow spin on lube oil filter, electrical starter motor with soft start engagement feature, battery charging alternator with 1 X 24 V or 2 X 12 V DC dry type battery and consisting of the following accessories: (i) Radiator having blower fan & guard (ii) Pipe coupling for cooling system (iii) Corrosion inhibitor coolant (iv) Filters at fuel / lube oil (v) Fly wheel housing and fly wheel suitable for alternator (vi) Shut-off coil protection with safety for LLOP / HWT / overspeed / high & low DC voltage (vii) Dry type heavy duty replaceable paper element air cleaner with restriction indicator and vacuum indicators

(viii) Residential silencers (ix) Stainless steel exhaust flexible bellows (x) Motor driven priming pump (xi) Electric starter motor (xii) Battery charging alternator (xiii) Exhaust piping made out of Class 'C' MS pipe inclusive of all accessories and mineral wool insulation covered with aluminium sheets for the entire length of exhaust pipe as per manufacturer's recommendation (xiv) First fill of oil, coolant and diesel during commissioning (xv) Interconnecting copper cabling of adequate capacity between batteries and controller (xvi) MS Class 'C' fuel pipe (xvii) Self starter 12 / 24 V DC (xviii) Metering equipment for recording (a) Battery voltage and charging rate (b) Coolant temperature (c) Lubricating oil pressure (d) Engine speed (RPM) (e) Engine hours run (f) Balance of fuel (xix) Safety & Protection (Trip & Indication) (a) High water temperature (b) Low lube oil pressure (c) Low and high speed trip (d) High and low DC voltage (e) Overspeed stop (xx) Base frame having sturdy fabricated welded construction, channel iron (duly painted) (xxi) 02 Nos. 12 V, 180 Ah maintenance free batteries with leads and terminals (xxii) Built-in fuel tank having diesel storage capacity not less than 12 hrs running of DG set or as per manufacturer's recommendations complete with drain plug, vent, inlet and outlet connections, level indicator and position for cleaning

Supply, installation, testing and commissioning of ATS 800 Amps capacity 415V, 50 Hz (WCR=50 KA for 3sec)

M & L for 6 core, 2.5 mm² low smoke zero halogen (LS0H) fire survival control cable with circuit integrity, conforming to BS 7846 and rated for 600 V, having plain annealed stranded copper conductor with fire-resistant mica tapes covered by an extruded layer of cross-linked polyethylene, extruded layer of thermoplastic low smoke zero halogen (LS0H) compound, single layer of galvanized steel wires and thermoplastic LS0H compound sheath, suitable for operating temperature range -40 ˚C to +90 ˚C and minimum bending radius being 12 times the overall cable diameter, including laying, clamping, termination and ferruling complete as specified and directed by the engineer-in-charge. Make: Havells, Polycab, Finolex, RR Kabel

M & L for normal type 50 mm NB double-wall corrugated poly PE pipe with co-extruded bands on the outside and black interior having crush resistance as per IEC 23-46;V1 with 5% deformation of internal diameter, stabilised against UV rays and tested as per ISO 1133 along with accessories for protection of LV and MV electric cables complete as specified and directed by the engineer-in-charge. Make: Gemini, Tirupati, Supreme

M & L for GI strip of size 32 mm x 6 mm as earth lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. complete all as specified and directed.

ARBORICULTURE

Digging pits of size 0.6x0.6x0.9m, making berms /bunds and supply and planting 6 to 8 feet high Areca palms trees & all other Mature / ever green trees, refilling soil around the plantation, wearing etc. complete all as specified and as directed by Engr-in-Charge. Note:-Item No. 36.001 & 36.002 above shall be maintained for 06 months with proper care like watering, plucking of weeds etc. The rates quoted by the contractor shall be deemed to include for maintaining the plantations & grass for a period of 12 months ,and nothing extra shall be payable on this account etc. complete all as specified and directed

M&L for making pit to keep the garden porous , wet and watering including making slope to the ground (1:100) outwards towards drains and planting Doob grass / Bermuda grass @ 250 gms of seeds/100 sqm of ground, free from weeds obtained from Nursery and dibbled at 5 cmc/c, lightly rolled With hand roller and watered including spraying of Urea or Ammonium sulphate at the rate of 1 kg /50 sqm area on the grown grass etc. complete all as specified and directed.

Supplying and planting grown trees/ grass / shrubs as mentioned below:

I. TREES

a) Syzygium Cumini commonly known as Jamun Tree

b) Cedrela Toona commonly known as Red-Cedar Tree

c) Mangifera Indica commonly known as Mango Tree

d) Plumeria Acutifolia commonly known as Red-Jasmin

e) Spathodea Campanulata commonly known as African Tulip Tree

f) Lagerstroemia Flosreginae commonly known as Pride of India

II. SHRUBS

Murraya Exotica commonly known as Orange Jasmine Note:- The rate of this item, includes for supply of plants as specified , transportation to site, excavation of pits as follows: i) 0.6x0.6x0.9m for large shrubs and climbers ii) Filling pits with Prepared manure soil ( Ratio 1:2 i.e. 1 sludge : 2 good earth by volume) iii) Supply, transportation and mixing of soil improvement nutrients as required, inside coat of Aldrin in all pits, flooding with waterdressing including removal of rubbish & surplus earth if any with all lead & lifts, planting and stacking in full and final location including all locations specified and maintenance of plants for a period of 12 months, replacement of any dead & sickly plants in this period, supply & spraying of insecticides as required.

III. GRASS

Supplying & laying Doob grass or Bermuda grass

COMPREHENSIVE MAINTENANCE OF LIFTS

Comprehensive maintenance and repair of fully automatic electrically operated fire elevator lift of any make installed against BOQ Item No. 30.001 in building (B+31 Upper Floors), (Total 04 Lift) comprising of all devices and accessories through out 12 months on all days including holidays for period of 03 years after expiry of defects liability period as shown below and all as specified and directed by GE.

(a) 1st year after expiry of defects liability period

(b) 2nd year after expiry of defects liability period

(a) 3rd year after expiry of defects liability period

Comprehensive maintenance and repair of fully automatic electrically operated fire elevator lift of any make installed against BOQ Item No. 30.004 (Lifts - 06 No) & 30.008 (Lift - 02 No) in building (B+31 Upper Floors), (Total 08 Lift) comprising of all devices and accessories through out 12 months on all days including holidays for period of 03 years after expiry of defects liability period as shown below and all as specified and directed by GE.

(a) 1st year after expiry of defects liability period

(b) 2nd year after expiry of defects liability period

(a) 3rd year after expiry of defects liability period

STP: MAINTENANCE & MANNING OPERATIONS

PART I Manning and operation of sewage treatment plant in three shifts 6000 to 1400 hours, 1400 to 2200 hours & 2200 to 0600 hours having an FGM (skilled) and one mate (semi skilled) in each shift of plant of capacity 400 KLD with MBBR type STP complete installation including pumping of treated water to building OH tanks for flushing purpose complete all as specified and directed.

(a) 11 months after completion of first year

(b) 11 months after completion of second year

(c) 11 months after completion of third year

(d) 11 months after completion of fourth year

(e) 11 months after completion of fifth year

(f) 05 months after completion of sixth year

Equipments (a) Wet well submersible pumps- 02 working and 01 standby (b) Raw sewage transfer pump- 02 working and standby (c) Air blower- 02 working and 01 standby (d) Sodium Hypochloride dosing system with suitable diaphragm pump. (e) Recirculation pumps- 01 working and 01 standby (f) Pump sets- 01 working and Hot standby (Tertiary treatment) (g) BLANK (h) Sludge dewatering filter press feed screw pump- 01 working and 01 standby (i) Hydraulic type filter press of capacity 55 kg per day- 01 working (j) Control panels for STP plant (k) MBBR of aeration tanks- 02 Nos (I) Lamella clarification- 02 Nos (m) Activated carbon filter- 02 No (n) Multi grade filter- 02 No Activities (a) Cleaning of entire plant room and equipments daily (b) Overhauling I greasing and replacement of pump gland packing's monthly and as and when reqd (c) Filling of overhead tanks with treated water for high rise bldgs G+31 (2 towers) by operating distribution valve and overhead tank by deploying required manpower to ensure sufficient STP treated water is made available round the clock to the bldgs

Notes (for item no 38.001 to 38.008) (i) All chemicals reqd for addition in the STP plant will be measured and paid separately as supply of under Part II. (ii) Testing of water sample shall be carried out by the contractor from Govt approved lab / registered lab/ NA BL certified lab for BOD five days, PH, TDS and turbidity and kept on record on weekly basis. (iii) Frequency of test. (a) BOD five days Twice a month (b) PH, TDS, turbidity, free chlorine- daily (iv) Non compliance of testing of water samples will invite penalty at triple the rate of testing charges from Govt approved lab / registered lab / NABL certified lab. (v) The electricity and water required for running of STP will be provided free of cost by the department. (vi) M&O is to be done by vendor executing the work of STP.

PART II Supply only sodium hypochloride solution of 06% concentration in suitable non corrosive cans (The chemical will be supplied as and when required and demanded by E-in-Charge and not in bulk to avoid loss of chlorine in the solution considering its shelf life)

PART III Annual comprehensive maintenance of 400 KLD STP plant of 464 DUs at Trombay(G+31 floor (2 towers) complete by deploying qualified manpower and material as reqd with the following: (i) regular oiling of all machinery and moving parts (ii) Regular greasing of all machinery and moving parts (iii) Carrying out regular preventive maintenance of all electrical panels and their parts and repairs /replacement of electrical worn out parts if needed (iv) Topping up of filter media as and when required or as per manufacturers recommendations (v) Topping up / changing of activated carbon as and when reqd or as per manufacturers recommendations (vi) BLANK (vii) Carrying out daily, weekly, monthly, quarterly, half yearly and yearly maintenance as per manufacturers recommendations (viii) Defective material produced after repairs/ replacement of worn out or defective parts will be departments property and shall be deposited to E/M store yard Note- (i) Non functioning of STP due to any problem / due to non functioning of machinery or defect in plant will invite penalty at Rs 15000/- per day. (ii) Cost of replacement of filter media and activated carbon as and when required or as per manufacturers recommendations is inclusive of rate quoted for AMC. (iii) The dry sludge sewage cakes shall be removed from site by contractor. (iv) Defective material produced after repairs/ replacement of item if any will be departments property and same will be deposited to E/M store yard

1st year after expiry of defect liability period

2nd year after expiry of defect liability period

3rd year after expiry of defect liability period

Varindera Constructions Limited

Rds Project ltd.

Som Projects Pvt. Ltd.

VISHAL INFRASTRUCTURE LTD

SHANTI CONSTRUCTION (GUJ) PVT. LTD.