Construction of Balance work of Academic Block (Block-2) of Polytechnic college at Beoli Doda.

Amount

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

CEMENT CONCRETE (CAST-IN-SITU)Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Dry stone pitching, 225mm thick, including cost of stones and preparation of surface. Nallah stone

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for:

Suspended floors, roofs, landings, balconies and access platforms.

Stairs (excluding landings) except spiral staircases.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Columns, pillars, piers, abutments, posts and struts.

Foundations, footings, bases of columns etc. for mass concrete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Anchor Bolts providing and fixing of 16mm dia holding down Anchor Bolt 450mm long with nuts for holding steel trusses.

Providing and fixing plained eaves boarding. 300x40 mm (nominal size)

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

C.G.I. SHEETS ROOFING Providing corrugated G. S. sheet roofing including vertical/curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.12.5.1 1.60 mm thick with zinc coating not less than 350 gram/m2 12.5.2 1.25 mm thick with zinc coating not less than 350 gram/m2 12.5.3 1.00 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with:8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Half brick masonry Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth ncluding curing in :6.15.2 Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Extra for half Brick masonry in superstructure above plinth level upto floor V level.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. First Class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.4 mm thick glass pane (weighing not less than 10 kg/sqm)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 9.98.1 300x16 mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to equired colour and shade with necessary screws etc. complete.

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Single rubber stopper

CEMENT PLASTER (IN COARSE SAND) 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 coarse sand)

20mm Cement plaster in two coats under layer 12mm thick cement plaster 1 : 4 (1 cement : 4 coarse sand) finished with a top layer 8mm thick cement plaster 1 :4 (1 cement : 4 fine sand)

CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 coarse sand)

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown. ( make is to be decided by Engineer)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. ( make is to be decided by Engineer)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick (in Two coats)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work.( make is to be decided by Engineer)

Finishing walls with acrylic smooth exterior paint (Apex/Excel) of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm.( make is to be decided by Engineer)

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of tile 600x600 mm

Granite stone flooring ( Sadar Ali ) over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.

Pluming , Sanitary Installations:-

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: Range of three urinal basins with 10 liter white P.V.C automatic flushing cistern.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard.

Rectangular shape 453x357mm

Ractangular shape 1500x 450mm

Providing and fixing 600x120x5mm glass shelf with edge round of supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc. complete.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete:

Semi rigid pipe 40mm dia

Flexible pipe 40mm dia

(B). C.P. Fitting

Providing and fixing of 15 mm CP bib cock of approved make ( Jaquar make) having code no. CON CHR 037 confirming to IS 2980

Providing and fixing of CP Angle value of Jaquar make having code no. CON CHR053

Providing and fixing of 15 mm C.P. brass long nose bib cock of approvedmake (Jagvar make) having code no. CON CHR 307 confirming to IS 2980

Providing and fixing of CP mixer of approved make having code no. 167 B

Providing and fixing of 600 mm long tower rail of approved make having code no. 1111

Providing and fixing of scuare tower ring having code no. 1121

Providing and fixing of CP soap dish of approved make having code no. 1131 N

Providing and fixing of CP paper holder of approved made with necessar screw and plastic gatti make having code no. 1151

Providing and fix of CP shower of approved make having code no. 1799 incl. shower arm

Providing and fixing 10mm sand CP grating for gully, floor or nahani trap.

Providing and fixing in position 40mm diameter mosquito proof couping of approved municipal design.

Providing and fixing of CP neeple of approved make

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Water Supply, CP Fittings, Disposal System:-

Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good walls.

25 mm dia nominal bore (medium)

15mm dia nominal bore (medium)

20mm dia nominal bore (medium)

Providing and fixing G.I pipes complete with G.I fittings and clamps, trenching and refilling etc. (external work)(25mm dia nominal bore.)

Fixing water meter and stop cock G.Ipipe line including cutting and threading the pipe and making long screws etc. complete. (cost of water meter and stop cock to be paid separately) (20 mm to 25 mm)

Providing and fixing ball value (brass) of approved quality complete. High or low pressure with plastic floats.

20 mm nominal bore

15 mm nominal bore

Providing and fixing gun metal non-return value with of approved quality (screwed end) (25 mm nominal bore (vertical)

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

Providing and fixing of PVC pipe of 4Kg/ Cm Square of approved make ( Spureme) for carring disposal of seat and waste water of wash basin etc. incl. scalfoliding complete.

Providing and fixing PVC floor trape of supreme make of size 100x 75

Providing and fixing of PVC collar of approved make of supreme make

Providing and fixing of PVC plain bend of supreme make

Providing and fixing of steel clamp of good quality incl. fixing the screws and making good the wall

Providing and fixing of PVC Door bend of supreme make

Providing and fixing of PVC door Tee

Providing and filling of joints in PVC pipe with solution and ring of required size

(D). Sewer Line

Earth work in excavation by manual means in trenches of required width for pipes, cables. All kinds of soil-(a) pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia.

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) aii-round S.W. pipes including bed concrete as per standard design: ( for150mm diameter S. W. pipe) crushed

Providing and lying of cement concerte in 1:3:6 mix ( 1 cement : 3 coarse sand: 6 graded stone aggregate) using 20 mm nominal size aggregate for in encasing of pipe ( Crushed)

Centring and shuttermg including strutting, propping etc. and removal of form for· Foundations: footings, bases of columns etc. for mass concrete. (for in casing of pipe)

Providing laying and PVC pipes of Supreme make

160mm (4kg/cm2)

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4, C.I. cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame not less than 38kgs, R.C.C. top slab with 1:2:4 mix, foundation concrete 1:5:10, inside plastering 12mm thick with cement mortar 1:3, finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design.

Inside dimension 455x610m and 45cm deep for single pipe line with common burnt clay bricks

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type.

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) RCC top slab with 1:1.5.3 mix ( 1 cement : 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement :2 coarse sand: 4 graded stone aggegate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.

inside size 90x80 cm and 45 Cm deep incl. C.I cover with frame ( light duty) 455x610 mm internal diamensions total weight of cover and frame to be not less than 38 Kg ( weight of cover 23 Kg and weight of frame 15 Kg)With F.P.S bricks with class designation 75 and with Crushed stone aggregate

Inside size 90x80 cm and 60 Cm deep incl. C.I cover with frame ( light duty) 455x610 mm internal diamensions total weight of cover and frame to be not less than 38 Kg ( weight of cover 23 Kg and weight of frame 15 Kg)

Inside size 120 x 90 cm and 90 Cm deep incl. C.I cover with frame ( medium duty) 500 mm internal diamensions total weight of cover and frame to be not less than 116 Kg ( weight of cover 58 Kg and weight of frame 58 Kg)

PARDEEP KUMAR AND CO

ABROL CONSTRUCTION COMPANY