Erection of tubular pole in Avantika transit camp for diversion of over head conductor installed at last row (Qtr.116 to 120) under Magadh OCP, M-S Area.

Amount

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required

Erection of metallic pole of length above 10mtr and upto 12 mtr in cement concrete 1:3:6 ( 1 cement :3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

erection of angle iron/channel iron cross arm on wood /RCC/PCC/steel tubular or Rail Pole for 4 wire system.

Supplying of channel iron 75 mm X 40 mm X 6mm (7.14 kg per mtr) cross arm for 4 wire over head line complete with clamps bolts, nuts and washer etc including binding of holes for insulator pins ( as per drawing ) and painting with primer and finished paint as required.

Supplying of channel iron 75 mm X 40 mm X 6mm (7.14 kg per mtr) cross arm for 2 wire over head line complete with clamps bolts, nuts and washer etc including binding of holes for insulator pins ( as per drawing ) and painting with primer and finished paint as required.

Erection of angle iron/channel iron cross arm on wood /RCC/PCC/steel tubular or Rail Pole for 2 wire system.

Supplying and erection of 100 mm X 80 mm pin insulator complete with G.I. spindle and nuts etc. as required.

Supplying and erection of 100 mm X 110 mm shackle insulator with G.I. Bolts, nuts and straps etc. as required.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clapms, bow tightener, 7/3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 ( 1 cement ; 3 coarse sand ; 6 graded stone aggregate 40 mm nominal size) foundation

wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed steel conduit as required. 2 X 6 sq.mm +1 X 6 sq.mm earth wire

Supply of 6 SWG G.I. wire

Erection of G.I. wire no-6/8 SWG including binding etc. as required

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle pannel, making connection, etc. as required.125A

Total impact of GST for the purpose of CTC

M/S T K ENTERPRISES

M/S GAURAV KUMAR TIWARI