Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹4.5 L
Closing Date
11 Nov 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Visvesvaraya Technological University
Mr. Jayappa D
Extension of first floor at NSS Bhavan at VTU, Jnana Sangama, Belagavi
VTU/2025-26/BD/WORK_INDENT172
VTU/2025-26/BD/WORK_INDENT172
Open
Buildings
Two Tender Document System(Two Cover)
Visvesvaraya Technological University Belgaum
13 documents required · 13 mandatory
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
List of Financial Resources with Certificates
Satisfactorily completed in last five years at least one single similar Civil work of value not less than Rs. 237.29 Lakhs contract for Central/State Government /Quasi Government Department
Executed in any one year the following minimum quantities of work as mentioned in the bid document.
Liquid assets and /or availability of credit facilities of not less than Rs. 88.98 Lakhs.
Achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction/ Electrical/ Water supply/Sanitary works only) of Rs. 593.22 Lakhs.
Owning the following key and critical equipment for this work as mentioned in the bid document.
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded as mentioned in the bid document.
IT returns with balance sheets for the last five years have to be submitted.
GST and PAN card registration certificate has to be submitted.
Class I registration certificate
All other documents as mentioned in the bid document.
₹5,000
₹4.5 L
11 Oct 2025
11 Oct 2025
12 Nov 2025
10 Nov 2025
24 Oct 2025
Extension of first floor at NSS Bhavan at VTU, Jnana Sangama, Belagavi
Demolishing R.C.C.work manually/by mechanical means including stack- ing of steel bars and disposal of un serviceable material to the appropriate disposal area as per direction of Engineer-in-charge.
Providing and laying in position Cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement concrete for all Super structures of building , , Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m heig...
Formwork, Centering & Scaffolding for Sl No 9 : RCC Columns As per Addendum-I in Volume-1 of page No.-111 (@70% of Finished Rate) Ground Floor. Providing and laying in position Cement concrete for all...
Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Formwork, Centering & Scaffolding for Sl No 14 : beam & lintels of buildings As per Addendum-I in Volume-1 of page No.-112 (@60% of Finished Rate). Ground Floor Providing and laying in position Cement...
Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Formwork, Centering & Scaffolding for Sl No 19 : Chejjas, Canopy & Other Architectural projections of minor sections As per Addendum-I in Volume-1 of page No.-112 (@45% of Finished Rate)First Floor. P...
Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
formwork, Centering & Scaffolding for Sl No 15 : RCC Roof Slab of buildings As per Appendix-I in Volume-1 of page No.-112 (@50% of Finished Rate) First Floor. Providing and laying in position Cement c...
Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Formwork, Centering & Scaffolding for Sl No 16 : Staircase and other similiar structure As per Addendum-I in Volume-1 of page No.-112 (@50% of Finished Rate) Ground FloorProviding and laying in posit...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement :...
Providing Half Brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level Cement mortar 1:4 (1 cement : ...
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185(Part III) in super structure above plinth level up to floorIlevelwithRCCbandat sil...
Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from ...
Providing 12mm cement plaster with Cement mortar 1:3 (1cement: 3 coarsesand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rende...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...
Providing and fixing plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for se...
Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and s...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and si...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden fram...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing& fixing of Openable window made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free w...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m square over and including one co...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m square over an under coat of primer applied @0.75 ltr/10 m square of approved brand and manufactu...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m square over an under coat of primer applied @ 0.80 ltr/10 m square of approved brand and man...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm .
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Tower Bolts 250x10mm
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Aldrop 16mm dia, 300mm
Providing and fixing door latch with necessary screw set ccomplete. Bright finished brass latch
Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge. 200mm length
Providing and fixing bright finished brass handles with screws etc. com- plete: Brass handles 125 mm with plate175x32mm
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
New Terrace waterproofing Surface preparation like Removing the dust particles ,chipping, grinding and washing.Expanding the major crack's with cutter machine and crack filling with "Epojit - LV" Bond...
Protection screed is compulsory on waterproofing coating With sand, cement, aggregate and chemical (Mapeplast super and Planicrete SBR) Screeding Work roofing for weather proof course with 12mm down s...
WATER SUPPLY WORK
Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings,this incl...
Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings,this includes jointing of p...
Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings,this includes jointing of p...
Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe w...
Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe w...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore Vol-2
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g.
Cutting holes up to 15x15cm in R.C.C floors and roofs for passing drain pipe etc., and repairing the hole after insertion of drain pipe etc., with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 gr...
Cutting holes up to 30x30cm in walls including making good the same with common burnt clay F.P.S (non modular) bricks
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class. a. Economy
Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete
Providing and fixing PTMT grating of approved quality and colour Rectangular type with openable circular lid
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring confirming to IS : 5383, leaving 10mm gap for termal expan...
Providing and placing on terrace, (at all floor levels) polyethylene water storage tanks IS : 12701 marked with cover and suitable locking arrangements, and making necessary holes for inlet, outlet an...
Supplying, fixing, testing and commissioning of portable Water Cooler (Floor mounted model) in corridors for drinking water with all the necessary accessories etc. Make: Kent/Aquaguard or equivalent.
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with f...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with t...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular...
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover 180 x 150 mm size P type & With Non Modular common burnt clay ...
Providingand fixing CP Brass 32mmsize BottleTrap of approved quality & make and as per the direction of Engineer-in-charge.
ELECTRICAL WORKS Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by ...
25mm dia 2mm thick
32mm dia 2.5mm thick
Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...
25mm dia 2mm thick
40mm dia 2mm thick
Supplying PVC/GI flexible conduit pipe .. mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300m...
Supplying And Fixing Metal Fan Box with Round Hook.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated c...
Medium point above 3Mtr upto 6Mtrfrom tapping point to out let via switch
Long point above 6Mtr upto 1OMtr from tapping point to out let via switch
Two outlet in a row, above 3Mtr upto 6Mtr from tapping point to out let via switches.
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
2.5 Sqmm Copper wire
4.0 Sqmm Copper wire
6.0 Sqmm Copper wire
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ...
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary raw1 plugs, Machine/N...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Make: Anhcor/Crabtree/Legrand a) 1-3 Module 6Amps one way Switch
6Amps Two way Switch
6Amps 3way socket
Stepped Fan Regulator.
16Amps one way switch
6Amps Bell push
32Amps DP switch
6/16Amps universal socket
TV/Telephone socket
Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size . ..... mm conduit using necessary machine screws. Make: Anhcor/Crabtree/Legrand a)80mm
Supplying and fixing regular double door MCB distribution boards on wall I wood board I flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacit...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circui...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/panel board. Make: Anchor/Crabtree/Legrand a) 25 Amps 2 pole
Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. Make: Finolex or as approved by the Engineer-in-charge a) 1 Pair
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection ...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leak...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4...
Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter.
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A C. 50 Hz 12/24v D.C.
Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) up to63 amps.
Supplying of 63 amps Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947. 63 amps.
Supplying and fixing HRC fuse units base on existing switch/panel board. 32 to 63 amps.
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32 Amps.
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs...
Fixing of ..... Amps TPST I change over switch I Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.15A to 63A TPDTICOS.
100A to 250A TPDTICOS
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat . with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint...
50x100x50x6mm C channel
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in averag...
3.5 core 35 sqmm
3.5 core 50 sqmm
Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe I stoneware pipe I on wall/ on pole as required. In existing trench/duct. 6 sqmm to 16 sqmm On wall/Structure
25 sqmm to 75 sqmm
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete.(As per Civil SR KSRB 1-2, P-7) In soil (ordinary)
Providing and laying in position 1OOmm dia stone ware pipe in existing trench.
Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1
Supplying and fixing L. T cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc. 95 s...
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)
Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.150x50mm
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm
35 sqmm Long Barrel
50 sqmm Long Barrel
Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.8SWG GIWire
Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power I...
LED light fighting 1 x4'- 20/22 w
LED light fighting 2x 4' -36/40 w
Supply of round surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains c...
LED square or round down light 1 0-12W
LED square or round down light 15-18W
Supplying of surface mounting non integral type ........ LED w lumina ire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEOs with CC...
LED modular down light 2'x2' /1' X 4' 34 -36watt
LED modular down light 2'x2' I 1' x 4' 42-55 watts
Supplying exhaust fan of 1440 RPM of 300mm (12" sweep) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ( Make: Bajaj/Crompton Greaves/Havells/Usha
Supplying capacitor type ceiling fan (5 star rating) complete with down rod blades, shackle, canopies etc, for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-19...
56 inch Sweep (1400mm) Regular model
Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply. Make: Bajaj/Crompton Greaves/Havells/Usha 300mm Sweep
Fixing all types and all capacities of fluorescent I false ceiling I spot light I CFL I LED fittings indoor on the wall/ ceiling I rafters I girders using 23/0.0076" twin twisted PVC insulated wire...
Using necessary length of G.I. chain
Using 1 Mtr long 19mm 18 SWG enamelled brazed conduit of two nos. rod pendent with ball socket with check nuts all nickel plated.
Using 2 Mtr long 19mm 18 SWG enamelled braised conduit of two nos. rod pendent with ball socket with check nuts all nickel plated.
Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, n...
Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary ...
Extra length of GI pipe of class B 19mm dia for down rod.
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.
Supplying and Fixing........mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL s...
Supplying and drawing UTP-CAT 6E LAN cable. Make: D-Link/Molex/Systimax
Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. Make: Finolex or as approved by the Engineer-in-charge a) 5 Pair
Supplying & Fixing of 12U with 450mm depth switch mounting rack with power manager & Cable manager. Make: Netwack/Valrack
Supplying and fixing of 24 Port Gigabyte (manageable) POE Network Switches Make: D-Link/Cisco/HP
Supplying & fixing of single I/O socket with back box Make: D-Link/Molex/Systimax
Supplying & fixing of double I/O socket with back box Make: D-Link/Molex/Systimax
Supplying & Fixing of 1 Mtrs Cat 6 Patch Cable Make: D-Link/Molex/Systimax
Supplying & Fixing of 24 Port 10/100/1000 patch panel EachPatch panel for LAN cabling.Make: D-Link/Molex/Systimax
Supplying and fixing of 10 pair MDF krone junction box with KRONE Module / Telephone cable termination. Make: As approved by the engineer-in-charge
Supplying.....litres capacity vertical/horizontal type wall
mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Annexure1.pdf
Others - Annexure1 • 0.70 MB
Tender document1.pdf
Tender Document • 25.84 MB
Drwaings.pdf
Others - Drawings • 0.65 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .