REPAIR / MAINT OF INTERNAL ROAD OF ILP-I AND ADJACENT AREA IN AOR OF AGE B/R-I UNDER GE PANAGARH

Amount

M&L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n.exc 400 sqm, exc 50 mm and n.exc 100mm deep, complete all as specified and as directed by Engineer-in-Charge. Note : Scarifying include racking over and grading the broken up surface to the proper camber etc. as required.

M&L for Soling with 150 mm spread thickness (or sub bases)with broken boulders or quarried stone, interstices filled surface formed and rolled and consolidated to required gradient and camber, complete all as specified and as directed by Engineer-in-Charge.

M&L for 7.5 cm thick (compcted thickness) WBM with coarse aggregate (basalt type of aggregates) of grading 2 (63 to 40 mm size) or grading 3 (50 to 20mm) spread rolled and consolidated to required gradient and camber with preparing unsurfaced WBM by brushing with wire brushes for removing mud etc., sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc., complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of existing black top surfaces by brushing with wire brushes for removing caked, mud etc., sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc., complete all as specified and as directed by Engineer-in-Charge.

M&L for applying evenly a prime coat of Cationic Bitumen Emulsion SS1 confirming to IS : 8887 at a rate of application of 0.7 - 1 kg/sqm on surface of WMM / WBM as specified in Table 500-3 of MoRTH Specification for road and bridge works 2013, using mechanical sprayer, complete all as specified and as directed by Engineer-in-Charge.

M&L for applying evenly a tack coat of Bitumen VG-10 grade conforming to IS : 73 at a rate of application of 0.3 - 0.4 kg/sqm on bituminous furface as specified in Table 500-5 of MoRTH Specification for road and bridge works 2023, using mechanical sprayer, complete all as specified and as directed by Engr-in-Charge.

M&L for premixed bituminous macadam over road using bitumen VG-30, laid/rolled by 8 to 10 tonne capacity roller and compacted to required gradient and camber (consolidated thickness 75 mm or less), binder contents of premixed macadam shall be 4% by weight of total mix (Design Mix), complete all as specified and as directed.

M&L for bituminous premix semi-dense asphaltic concrete 40 mm (average) consolidated thickness with 5.5% binder content (Paving bitumen VG-30) by weight of total mix (Design mix), by means of self propelled mechanical spreader/paver, rolled and compacted to required camber and gradient by using mechanical power road roller 8 to 10 tonne capacity, complete all as specified and and as directed.

Supply and fixing in repairs cat eye solar reflective type of metal body alloy of size 120mm x 110mm x 50mm with PAMA striplens reflector of model No. DA 972 Make of Dark Eye fixed with and incl MS stud of suitable size as per manufactures instructions, complete all as specified and as directed.

Supply and fixing in repairs solar cat eyes alluminium alloy shall (100% water proofing design according to IP 68) of size 125mm x 125mm x 25mm (shank 65mm) of high efiiciency Mono rystafic solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (2.4V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions etc., complete all as specified and as directed.

M&L for road safety convex mirror 80 cm dia with stand of stainless steel of dia 50 mm, grade 304 and with all fixtures fixing on ground surface using type C-2 (1:3:6), size (300 x 300 x 400) as in mass cement concrete for foundation filling including taking down old unserviceable ones, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs metal tubular delineator made out of ABS round body fitted with 02 Nos 100 mm dia highly reflective reflectors and rectangular reflector of 70mm x 23mm fixed on both sides of guide post and made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 1010 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150 x 150 x 300 mm) type B1, complete all as specified and as directed.

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction, complete all as specified and as directed.

M&L for 7.5 cm thick Moorum/red bajri filling in floors or pavings, laid in layers, spread, levelled and rammed including watering and rolled with 8 to 10 tonne power roller, complete all as specified and as directed.

Schedule of Credit

M/S SENAPATI ENTERPRISE

UNIQUE ENTERPRISE

JYOTIRMOY TRADING

BHARAT CONSTRUCTION