Loading…
Loading…
Tender Value
₹26.2 L
EMD Value
₹32,900
Closing Date
29 Sept 2026, 5:00 pm2d left
Jamandlamudi Sachin
AGM office Wani Area
Providing and fixing barbed wire fencing and water tank for 5 hectare Plantation Area at Ghugus Sub Area.
2026_WCL_365611_1
WCL wa4350-Civ-e030-2026-27/657
Open Tender
Civil Works - Others
Percentage
90 days
Ghugus
Please refer Tender documents.
3 documents required · 3 mandatory
₹32,900
18 Sept 2026
18 Sept 2026
30 Sept 2026
18 Sept 2026
29 Sept 2026
19 Sept 2026
18 Sept 2026 - 23 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 13 2.8.1 All kinds of soil. | 100.18 | cum | 200.85 | ₹20,121.15 |
| 2 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centering andshuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived fromnatural sources : 4 graded stone aggregate 20 mm nominalsize derived from natural sources) | 57.83 | cum | 6,937.65 | ₹4,01,204.3 |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, ifnishing and reinforcementAll work up to plinth level :1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). | 29.02 | cum | 7,974.6 | ₹2,31,422.89 |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Hot rolled deformed bars | 5,490.9 | kg | 95.25 | ₹5,23,008.23 |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete . | 973.14 | sqm | 306.9 | ₹2,98,656.67 |
| 6 | Fencing with R.C.C. post placed at required distance,embedded in cement concrete blocks, every 15th post, lastbut one end post and corner post shall be strutted on bothsides and end post one side only, provided with horizontallines and two diagonals of barbed wire weighing 9.38 kgper 100 metres (minimum), between the two posts fittedand fixed with G.I. staples on wooden plugs or G.I. bindingwire tied to 6 mm bar nibs fixed while casting the post(cost of R.C.C.posts, struts, earth work and concrete to bepaid for separately) :- Payment to be made per metre costof total length of barbed wire used.With G.I. barbed wire | 12,110 | metre | 11.8 | ₹1,42,898 |
| 7 | Supplying, erecting, testing and commissioning of minimum three & above star rated centrifugal water pump (monoblock), 415 V, three phase, 50 Hz, A.C. supply of 5.625 kW/7.5 HP with discharge of 780/170 lpm for head of 33/54 mand 80 mmsuction/65 mm delivery pipe on provided CC foundation as per specification no. WP-CGP. | 1 | each | 38,733 | ₹38,733 |
| 8 | Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. PE-100, 8 Kg/Sq. cm :63 m | 2,422 | rmt | 140 | ₹3,39,080 |
| 9 | Lowering, Laying and Jointing H. D. P. E./ M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part ii for all classesv 63mm | 2,422 | rmt | 50 | ₹1,21,100 |
| 10 | providing and fixing pvc service saddle clamp 63 mm dia x 25mm outlet including fittings brass male thread on top upvc pipe of 600mm length with ball valve attached for on and off all complete as per instruction of engineer in charge | 18 | job | 4,174.75 | ₹75,145.5 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 2.85 MB
BOQ_378541.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .