SPECIAL REPAIR TO ROADS FROM IT CHOWK TO TOWARDS DEPOT GATE IN RA AT CAD PULGAON

Amount

Excavation over areas, not exc 1.5m deep and including getting out in soft/loose soil complete all as specified and directed.

Removing excavated material exc 250 Mtr but not exc 500 Mtr and depositing where directed complete all as specified and directed.

Material and labour for moorum /red bajri filling in floors or pavings, laid in layers not exc 15cms thick, spread, levelled and rammed including watering complete all as specified and directed.

Material and labour for rolling and consolidating exc 8 tonne and not exc 12 tonne formation surfaces in cutting complete all as specified and directed.

Material and labour for soiling (or sub base) 200mm spread thickness with broken boulders or quarried stone interstices filled, surfaces for med and rolled and consolidated to required gradient and camber complete all as specified and directed.

Material and Labour for 150 mm thick (compacted thickness) WBM in two layers with coarse aggregate of grading 2 (63 mm to 40 mm size) or grading 3 (50 mm to 20 mm size) spread, rolled consolidated to gradient and camber required with granite trap or basalt stone aggregates, complete all as specified and directed.

All as per item No 6.00 here-in-before but except materials complete all as specified and directed. Note:- Materials will be obtained from relevant item no. 9.00.

All as per item No 6.00 here-in-before but except materials complete all as specified and directed. Note:- Materials will be obtained from relevant item no. 9.00.

Material and Labour for scarifying or picking gravelled macadam or bituminous macadam surfaces in area exceeding 50 mm and not exceeding 100 mm deep and area not exceeding 400 sqm complete all as specified and directed.

Material and Labour for screening road metals, chippings, etc. on the site of the work, when specifically ordered, including removing screened materials clear of screen and staking in seperate heaps for measuring ( materials from both side of screen measured) complete all as specified and directed.

Material and labour for preparing WBM surfaces by brushing with wire brushes fo removing caked mud etc sweping with brooms and finally fanning the claned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

Material and labour for preparing applying paving bitumen evenly a priming/ tack coat with bituminous primer at 10kg per 10 sqm complete all as specified and directed.

Material and Labour for premix bituminous macadam laid/rolled with 8 to 10 tonne power roller and compacted to required gradient and camber (consolidated thickness 75 mm or less) with binder content (paving bitumen) of 4% by weight of total mix all and 1.5% cement filler complete all as specified and directed. Note:- The work shall be executed by using hot mix plant & mechanical paver. The rate quoted shall be deemed included for cement filler.

Material and Labour for preparation of surfaces and applying evenly a priming/tack coat with bituminous primer over black top surface at 5 kg per 10 sqm using paving bitumen complete all as specified and directed.

Material and Labour for premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content (minimum) by weight of total mix (bitumen VG-30) and 2% cement filler, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified and directed. Note: The work shall be executed by using hot mix plant & mechanical paver. The rate quoted shall be deemed included for cement filler.

Material and labour for providing and laying at or near ground level factory made kerb stone of type B1 (1:2:4) (using 20mm graded stone aggregate) graded cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm including making drainage opening wherever required complete all as specified and directed.

Surface dressing not exc 15cm deep and getting out in soft/loose black cotton soil complete all as specified and directed.

Material and labour for moorum/red bajari in road berms, spread in roads berms 75 mm spread thickness levelled, rammed and consolidated to gradient and camber required with light roller of capacity not less than 0.5 tonne complete all as specified and directed.

Removing excavated material (soil) to a distance exc 50m but not exc 100m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Material and labour for preparing bituminous surfaces of road and marking 2.5mm thick cetre lines, stop lines, dashes, arrows etc and the likes not exc 10cm wide on roads, pavements with hot applied thermoplastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturer's instruction complete all as specified and directed.

Supply and fix cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PMMA striplens reflector, fixed with and including MS stud of suitable size as per manufacturer's instructions including taking down old one complete all as specified and directed. Make:- Dark eye cat No DA-971 or technocommercially equivalent in 3M or as approved by GE.

Supply and fix solar cat eye alluminium alloy shall (100% waterproofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10000 to 18000 mod complete as per manufacturer's instructions etc including taking down old one complete all as specified and directed. Make:-Approved by GE.

Supply and fix metal tubular de-lineators made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic elastometer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150 x 150 x 300mm) type B1 including taking down old one complete all as specified and directed. Make:- Approved by GE.

Note :- Schedule of Credit (Amount on Page No. 34 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be cosidered for acceptance. [ (-) Rs. 9318/-]

Chintamani Constructions

M/S Ramakant Chourasia

M/S L M Chourasia

SANJAY B SHARMA

Bidder Name

M/S L M Chourasia

M/S Ramakant Chourasia

Chintamani Constructions

M/S JAI BHAWANI CONSTRUCTIONS

SANJAY B SHARMA