Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹1,400
Closing Date
24 Sept 2026, 2:00 pmClosed
The Superintending Engineer / KEDC / KPM
No 1 Vellore Road Olimohamedpet Annamaaligai Kanchipuram
Improvement Works to the Kanchipuram Regional Office ADMN wing in the Ground floor of Central Office Building Kanchipuram
2026_EB_696771_1
SE / KEDC / KPM / Civil / OT.01 / 2026 - 2027
Open Tender
Civil Works
Works
30 days
Kanchipuram Circle
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹1,400
Yes
24 Sept 2026
24 Aug 2026
25 Sept 2026
25 Aug 2026
24 Sept 2026
25 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling the existing Damaged flooring and clearing the debries away from the site including all labour, lead lift etc., complete as directed by the Engineer at site | 28 | Sq.m | - | - |
| 2 | Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification including cost of all materials,all labour, lead lift etc., complete as directed by the Engineer at site | 28 | Sq.m | - | - |
| 3 | Colour washing the plinth side and top surface using approved good quality Acrylic Emulsion paint two coats over a coat of wall primer. Before painting the wall surface should be properly cleaned and the wall surface should be applied the approved quality wall putty neatly,[ patch work only ] etc, including cost of all materials, lead, lift, labour, scaffolding charge, etc., complete as directed by the Engineer at site. | 60 | Sq.m | - | - |
| 4 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc, including cost of all materials, lead, lift, labour, scaffolding charge, etc., complete as directed by the Engineer at site. | 20 | Sq.m | 1 | ₹20 |
| 5GST for bidders within TamilNadu | |||||
| 5.01 | SGST | 1 | percentage | - | - |
| 5.02 | CGST | 1 | percentage | - | - |
| 6 | GST for bidders outside TamilNadu (IGST) | 1 | percentage | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.44 MB
BOQ_837655.xls
BOQ • 0.34 MB
OT01.pdf
PDF • 0.11 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .