GE (N) P/TOKEN- 82 OF 2021-2022PROVISION OF CERTAIN LBW AND SPECIAL REPAIR WORKS IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE

Amount

M&L for Steel work in round or rectangular tube section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe-410-W (Gde-E-250 quality A) complete all as specified and as directed.

M&L for mild steel framed work such as grill, grating etc. with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

Material and labour for false ceiling with 10mm thick 1800mm x 1200mm plaster of paris sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of POP with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer including dismantling of existing ceiling of any description and any thickness including grid etc complete all as specified and as directed. NOTE: POP ceiling to be made in two /three tier design)

Material and labour for 12mm thick Gypsum Board PVC laminated false ceiling board on and including GI powder coated grid work of size 605mm x 605mm with using 32.0 mm x 23.5mm x 1.5 mm thick main tee, 26.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways complete all as specified and as directed. Make :- Armstrong, Diaken, New Age. Note: Height of ceiling is above 5 metres.

Supply and fix in repairs for 12mm thick toughened glass with etching as in openable door/ bathing cubica/ partitions including chamfered edge polishing fixed with necessary Ozone path touch fittings and fixtures etc. as per manufacturere's instructions complete all as specified and as directed.

M&L for plaster of paris decorative cornices/moulding to the pattern as approved, cross sectional area exceeding 13 Sqcm and not exceeding 25 Sq cm and fixed in decorative pattern including preparation of surfaces and applying two coats of acrylic distemper over a coat of primer matching with the colour of ceiling including dismantling of old pop complete all as specified and as directed.

Supply and fix for 100mm size SS handles, extruded, fabricated type, polished complete all as specified and as directed.

Supply and fix for brass locks, cupboard, grade 1, 75mm size, 6 levers with duplicate keys with brass key hole complete all as specified and as directed.

S&F Stainless steel butt hinges medium weight 100mm complete all as specified and as directed.NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm

S&F in repair floor power door stopper of Stainless steel body and tongue 135 mm anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as specified and as directed.

Taking down shutters of any description, area not exc.1 sqm each complete all as specified and as directed.

Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as specified and as directed.

Taking down shutters of any description, area exc.2sqm each complete all as specified and as directed.

Material and labour for 2nd class hardwood, plain, solid straigtht chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Supply and fix for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and as directed

Supply and fix for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and as directed.

Supply and fix for stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

Supply and fix for aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

M&L for complete removal of existing treatment on wall/Ceiling using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces ready to receive new finish complete all as specified and as directed.

M&L for preparation of surfaces by applying wall care putty 1 to 1.5 mm thick on walls /ceiling surfaces , filling cracks by crack filler and smoothen the surfaces with using sand paper etc complete all as specified and as directed.

M&L for two coats of acrylic distemper over a coat of alkali resistant primer of approved tint on wall surfaces complete all as specified and as directed.

M&L for two coats of acrylic distemper over a coat of alkali resistant primer of approved tint on ceiling surfaces complete all as specified and as directed.

Material and labour for preparation of New plastered surfaces of wall by applying birla putty whereever required, smoothenthe surface with sand paper and finally applying two coat of acrylic distemper complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of New steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint over a coat of Red Oxide Primer complete all as specified and as directed.

M&L for preparation of old surfaces of wood and wood based material of any description in ceiling/wall /joinery etc over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for 16 to 18mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and as directed.

Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and as directed.

Ditto all as per item No. 37.0 above but except bricks.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for double charged vitrified ceremic tiles 10 mm thick (square/rectangular) polished, area of each tile exc. 0.18 sqm not exceeding 0.36 sqm, in flooring etc , laid over and including screed bed of 15 mm thick cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade complete all as specified and as directed.

M&L for double charged Vitrified ceremic tiles 10mm thick of approved shade as in vertical surfaces, skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade over and including screed bed of 10mm thick in cement mortar 1:3 including , cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 7 to 8mm thick of colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bed in cement mortar 1:3 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed.

M&L for coloured glazed ceramic highlighter tile of size 600mm x 300mm x 7 to 8mm thick, colour and pattern as approved by GE, as in vertical surface set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bed in cement mortar 1:3 etc including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed.

S&F, in repair 18 to 19 mm block board, exterior grade pre laminated one side with decorative choice lamination & other side balancing white lamination as in Cupboard Cabinet or fixed with screws to timber frame work, complete all as specified and as directed.

Material and labour for 0.90mm thick decorative coloured laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.

Material and labour for 0.90mm thick decorative white laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.

M&L Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed.

M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

M&L 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and as directed.

S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails complete all as specified and as directed.

S&F Auto hinges, mild steel, bright finish or electrogalvanised 30mm width of flaps complete all as specified and as directed.

S&F Drawer Sliding channel fixed with screw and fittings fixture of 600mm long complete all as specified and as directed.

Ditto all as per item No. 54.00 but of size 450mm long

S&F, Magnetic catches of brass body and striking plate in complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness. (below or above ground level) complete all as specified and as directed.

M & L PCC type D2 1:4:8 (40 mm Gr. Agg ) as in sub base complete all as specified and as directed.

Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all as specified and as directed.

Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc complete all as specified and as directed.

Dismantling structural steel work including doors, gates, framed truss etc.complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in roof kerbs or mud stops rounded or chamfered on edges as in Coping complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

Material and labour for 12mm thick Gypsum Board PVC laminated false ceiling board on and including GI powder coated grid work of size 605mm x 605mm with using 32.0 mm x 23.5mm x 1.5 mm thick main tee, 26.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways complete all as specified and as directed. Make :- Armstrong, Diaken, New Age.

S & F of mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS1161-1998 grade ST.-240,as in main cross beams and running rails fixed independently with angle iron cleats or connecting pieces complete all as specified and as directed.

S&F mild steel rolled section as in main cross beams purlins, rafters and running rails fixed independently with angle iron cleats or connecting pieces conforming to Gde Fe-410-W, Gde E-250, quality A complete all as specified and as directed.

M&L for preparation of surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to mangalore tiles, roof, parapet, wall ,floor etc, on heritage buildings complete all as specified and as directed.

Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrcylic distemper complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Refixing 20mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified and as directed.

Refixing 15mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified and as directed.

Supply and fix for 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix for 20 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

M&L for 25mm thick coloured Glossy Chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.20sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC casing caping including all accessories after fixing on surface of walls /ceilings etc with PVC surface boxes of suitable module, earth dolly, covered with modular white cover plate & frame for modular switches , including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly all as complete all as specified and as directed for One light / wall / exhaust fan point controlled by one, one way switch 6 Amps

Ditto all as per item no 76.00 but for One ceiling fan point controlled by one, one way switch 6 Amps and regulator

Ditto all as per item no 76.00 but for One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board

Ditto all as per item no 76.00 but for One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board

Ditto all as per item no 76.00 but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 5 pin socket outlet plug point, 6 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly all as specified and as directed

Supply and fixing Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed.

Supply and fixing Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed.

S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed.

S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed.

Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed.

S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed

Supply and fixing 24 Watt LED high quality design PC Batten fitting with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make- Jaquar Cat No-LGLZ01X024XW or equivalent

Supply and fixing LED 10 W focus light, Surface mounted, powder coated, die cast aluminium and anodized aluminium reector with clear diffuser, fully adjustable complete with all accessories prewired all as specified and directed. Make- Jaquar Cat No LFCL01R010XW or equivalent

Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing ceiling fans working on single phase input voltage 140-285 , Sweep- 1200 mm, Power 32 W, 345 RPM , with 232 Air delivery CMM (m3 /min), complete with compact BLDC Motor, blades, down rods, electronic regulator and accessories, including making connections with provision of flexible wire 23 /0.0076 twin core copper conductor from ceiling rose/connector to fan complete all as specified & as directed. Make- Atomberg (NAVEO)

Taking down ceiling / exhaust fan and fixing, hanging connecting in same location or at site as directed after proper cleaning including provision of flexible PVC copper conductor cable of size 23/0.0076 twin core from ceiling rose or connecter to fan including taking down fan complete all as specified and directed.

Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed.

S & F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 6.0 Sqmm and one single core 6.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed PVC conduit and conduit accessories heavy duty ISI marked complete all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

J P ASSOCIATES

M/S Eknath agencies

Vijay Construction and Company

Gauri Associates

Sai Construction

BAGESHWARY CONSTRUCTION

ganesh electricals and airconditioners

R J ENTERPRISES

Parhar Enterprise