COMPREHENSIVE MAINT AND REPAIRS TO FLOORING, PLASTERING, PLINTH PROTECTION AND OTHER MISC B/R WORKS IN OFFICERS AND OMQ ACCN ZONE A AKASH VIHAR AT AF STN SURATGARH

Amount

BOQ (COMPREHENSIVE MAINT AND REPAIRS TO FLOORING, PLASTERING, PLINTH PROTECTION AND OTHER MISC B/R WORKS IN OFFICERS AND OMQ ACCN ZONE 'A' AKASH VIHAR AT AF STN SURATGARH )

Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified and directed.

Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified and directed.

M&L for Pressed steel frames of size 105mmx60mm made of 1.25mm thick Cold Rolled sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, PCC 1:3:6 Type B0 , for filling of hollow portion, complete all as specified and directed.

M&L for Pressed steel frames of size 125mmx60mm made of 1.25mm thick Cold Rolled sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, PCC 1:3:6 Type B0 for filling of hollow portion, complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and stiles as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified and directed.

S&F 35mm thick factory made 2nd class hardwood (Sal/ Hollock) glazed and skelton shutters open rebated and prepare to receive glass guage (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass/guage etc size of member etc size of members of shutters as specified in SSR part I Section-8 clauses 8.24(a) supplied and fitted to chowkhat, complete all as specified and directed.

M&L for prepration of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified and directed.

S&F Aluminum handles, 150 mm size plate type complete all as specified and directed.

S&F aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified and directed.

S&F aluminium alloy, 16mm dia and 250mm long anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed, complete all as specified and directed.

S&F Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours, articles n exc 200 Cu.cm each in 2nd class Hard Wood complete all as specified and directed.

M&L for door seal rubber beading 75 mm wide 4 mm thick for fixing with door shutter and similar situation including necessary drilling and cutting etc, complete all as specified and directed.

S&F Anodised aluminium powder coated door shutter having 150mm x 44mm x 2.85 mm thick bottom rail,150 mm x 44mm x 2.85mm thick middle rail, 100mm x44mm x3 mm thick stile and top rail including necessary fitting joinery cleat, glazing packing snap beading 10 mm x 10 mm ,anodised aluminium handle 200 mm long (02 Nos) , 3 Nos 100 mm size chromium plated butt hinges, 2 Nos 200mm size aluminium tower bolt, 1No aluminium alloy, 16mm dia and 250mm long anodised, sliding door bolt with hasp, staple (bolt type), 1No double legged floor door stopper aluminum alloy body and tongue, 1 No Aluminium body hydraulically door closer , designation No-3, universal type, weight between 61 to 80 kg etc inlcuding frame of section 100 mm x 44 mm x3 mm and door shutter, top and bottom portion covered with and including 5.5mm thick tint glass ordinary quality , one mortice lock (Make: Harrison ) with shutter and fixing complete all as specified and directed.

S&F Aluminum powder coated window and ventilator shutters, sliding type with four track (two track with and including galvanised mild steel wire cloth 0.50 mm nominal dia of wire & average width of aperature 1.00 mm and fixed with tinted tacks or galvanised wire staples, two track with and including 4.8 mm thick tined glass including necessary fitting and fixture) without sash bars, aluminum sections of size 40x20x1.5 mm fixed in aluminum anodised double frame of section size 63X35X2 mm including necessary jointing cleats, glazing clips, aluminum anodised snap beading, screws, aluminium beading, pvc packing, aluminum anodised fitting and fixture including aluminium chequered grills as on aluminium windows weight not less than 1.0 kg/sqm complete all as specified and directed.

S&F factory made steel window box type using ERW hollow 'P' section comprising double frame for glazed and gauged skelton shutters jointing internally with flat iron complete including grill of 12mm square bar, fixed horizontally @ 100mm centre to centre hinges, handle, tower bolts, lugs etc with cooler provision complete all as specified and as directed. Note :- (i) For the purpose of measurement and payment double shutter with frame shall be consider as one unit. (ii) Glazing and wire mesh shall be measured and paid for separately in respective item of schedule.

S&F Stainless Steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.

S&F in repairs Stainless Steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame/steel frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads, exc 1.5 sqm, complete all as specified and directed.

M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fix in repairs factory made mild steel cupboards shutters 1 mm thick with frame made from 1.25 mm thick sheet including all fittings i.e. mortice lock with handle ,buttt hinges ,peg set of their,etc including two coat of synthetic paint over a coat primer after preparation of surfaces complete all as specified and directed.

M&L in repairs for 18 mm thick solid PVC sheet UPVC Coated Celuka printed in one or two different colours( with wood grain printed pattern /ivory colour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified & directed.

S&F in repairs polyvinyl chloride (PVC) sheet frame of width 100 mm & 18 mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers instruction and specified.

Extra over solid PVC sheet for fixing in repairs 18 mm width & 2-3 mm thick PVC coloured lipping of approved design & colour fixed with solvent cement or headless nails complete all as directed & specified .

S&F in repairs 0 degree clip type self closing hinges for cabinets fixed with cadmium coated screws as per sample complete all as specified and directed.

S&F in repairs 75mm size bright finished chromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabinet drawers complete all as specified and directed.

S&F in repairs drawer runners folding type with guide channels & sliding channel with appropriate ball bearing/ rollers etc complete to obtain smooth movement of the drawers complete all as specified and directed.

M&L in repairs for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil complete all as specified and directed.

S&F stainless steel 25 mm dia curtain rod including stainless steel brackets and stainless steel end knobs fixed with plugs & screws, complete all as specified and directed.

Dismantling of wall and ceiling or insulation boards/ slabs / PVC panelling any thickness and in any position incl frame grid and cover fillets and framework etc complete all as specified and directed.

S&F 12mm thick plain gypsum board false ceiling with GI frame work including all necessary drilling, cutting to fix electical items complete all as specified and directed with followings:-(a) GI sheet channel 30x25x20mm of 24 Gauge fixed with rawl plug and screws 450mm centre to centre along with perimeter of walls.b) GI sheet channel made to shape 50x40x40mm of 24 guage placed @ 600mm centre to centre from perimeter of wall except long wall (in one span)(b) GI sheet channel made to shape 50x40x40mm of 24 guage placed @ 600mm centre to centre from perimeter of wall except long wall (in one span) (c) GI sheet intermediate runners of size 45x10x10mm of 24 guage fixed @ 1200mm centre to centre leaving frame of one side wall (in other span) (d) GI sheet 25mm wide & 20mm gauge suspenders fixed with steel fasteners to roof, ceiling @ 1200 mm centre to centre incl plugging in RCC slab complete all as specified and directed.

M&L prefabricated, 75mm wide POP moulded cornices, moulding fixed on ceiling/wall complete all as specified and directed.

M&L prefabricated, pre reinforced, 600mm dia POP moulded designer circle dooms fixed on ceiling/wall complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame complete all as specified & directed by Engr -in charge.

S&F PVC hollow Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified & directed by Engr -in charge.

Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness (below or above ground level) un- reinforced, complete all as specified and directed.

M&L for PCC(1:2:4) type B2 (40mm graded stone aggregate) filling in post holes, surface channels, drains and other similar work complete all as specified and directed.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge

S&F mild steel for framed structure like trrussed, purlins, crane gantries,post rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels, tubes,flate sections) including distance pieces, cleats etc conforming to Fe410-W (Gde-E-250) quality-A complete all as specified and directed.

Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings complete all as specified and directed by Engr-in-Charge.

M&L for pre painted galvalume aluminium zinc coating having GI based corrugated steel sheets 0.50mm thick of any colour as in tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw complete all as specified and directed by Engr-in-charge.

M&L for prepration of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

Taking down existing water proofing treatment from the top of RCC/arch slab, including taking down existing PCC padding tiles mud phusk or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish outside the premises, complete all as specified and directed.

M&L for PCC type B-1(1:2:4), using 20mm graded crushed stone aggregate as in PCC padding on depression of roof finished even and fair without using extra cement, complete all as specified and directed.

M&L for Water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of cleaning of concrete or plaster surface of roof and applying evenly a bitumen primer conforming to IS 3488@ 0.30Kg per sqm followed by a tack coat @ 1.2kg per Sqm using 85/25 grade industrial hot blown bitumen over it laid with APP modified polymeric water proofing membrane minimum weight 3.6kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 gm per sqm) unrolled & bonded to substrate with longitudinal and end laps 100mm as per manufacturer's instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.2 kg sqm and as per manufacturer instruction and including taking the APP membrane will be required where the parapet wall exceed 45cm for carrying over and taking into parapet walls, cut out neatly a horizontal groove 6.5 cmm deep, 7.5 cm wide section with lower edge at not less than 15 cm above the graded roof surface and groove shall be finished smooth with cement mortar 1:4 with WPC @3% by weight of cement where the parapet wall height is 45cm or less no groove will be required as the water proofing treatment will be carried over the top of parapet wall to its full thickness, complete all as specified and directed.

M&L for 15 mm thick screeding in cement mortar 1:4 on roof surface using water proofing compund as per manufacturer instruction surfaces finished even and smooth without using extra cement as on wall complete all as specified and directed.

M&L for 40 mm thick brick tiles laid on above treated surface and joints grounted flush in cement mortar 1:3 mixed with 5% crude oil by weight of cement on above treated surface complete all as specified and directed.

All as per item No 48 here-in-before but except brick tiles complete all as specified and directed.

M&L for PCC type B-0 1:2:4 (using 12.5mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified & directed.

Supply only integral water proofing compound (ISI marked), complete all as specified and directed.

M&L for repairing of RCC projections, chajjas , roofs, facia etc. by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sq mtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified and directed. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor.

S&F in repairs PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed.

S&F in repairs 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

Demolition of stone or brick masonry built in cement mortar including all quoins, arches etc.but excluding ashlar facing, dressed stone work etc, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius and built in cement mortar 1:6, complete all as specified and directed.

All as per Srl item No. 56 here-in-before but except bricks.

M&L for 75mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed.

M&L for Plain cement concrete (1:4:8), type D-2, using 40 mm graded mechanically crushed stone aggregates 75mm thick as in sub base or in mass concrete or in base layer, complete all as specified and directed by Engineer-in-Charge.

M&L for 25mm thick cement concrete 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in levelling course, surface finished fair and even without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or concrete wall surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces of roof projection ceiling etc including repairing of broken portion up to 6m height and surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on wall complete all as specified and directed.

M&L for complete removal of existing treatment from wall surfaces and applying one coat of Dr fixit solution to avoid seepage lekage and effect of effloresence, complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and fair without using extra cement but using water proofing compound as per manufacturer's instructions, complete all as specified and directed. Note :Water proofing compound shall be measured & paid seprately.

M&L for rough cast plaster with a mixture consisting of crushed stone or fine gravel aggregate of size 6 to 8mm as directed, mixed with coarse sand and cement in the ratio 1:1:1, finshed even over rendering with under coat 15mm thick cement and sand mortar 1:4, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of oil emulsion distemper over one coat of priming and over and including 1-2 mm thick JK/Birla wall care putty to achieve smooth finish surface, complete all as specified and directed.

M&L for applying two coats of exterior acrylic emulsion (weather proof treatment ), in camouflaging patterns, over new plastered surfaces , including preparation and using primer over new surfaces ,complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for coloured glazed ceramic tiles of approved shade of size 450 x 300 mm x 7 to 8mm thick as in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M & L Vitrified ceramic tiles 10mm thick (Square/rectangular ) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15mm thick screed bed or bedding layer in Cement Mortar (1:6) complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but n exc 0.18 Sqm, in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for Parking floor coloured heavy duty vitrified tiles (Square/rectangular ) polished, area of each tiles exceeding 0.06 Sqm but n exc 0.18 Sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15mm thick screed bed or bedding layer in Cement Mortar (1:6) complete all as specified and directed.

Demolition of stone slabs/paver block and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed.

M&L for machine cut polished kota stone slab flooring 18-20mm thick jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over 20mm thick screed bed in cement mortar 1:6, rubbing, grinding and polishing to achieve mirror finish, complete all as specified and directed.

M&L for polished kota stone slab 18 -20 mm thick in riser of steps, skirting, dado and pillar jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 10mm thick rendering in cement mortar 1:4, rubbing, grinding, rounding of edges and polishing to achieve mirror finish, complete all as specified and directed. Note : Kota stone shall be laid in one pieces for treads and risers for step, window cills and moulding/rounding of edge properly.

M&L for Dholpur stone as on wall cladding with machine cut face work , arches hexagonal roof pillar and all facing etc of 15 to 18mm thick one side single length laid and jointed with screw to wall in cement and sand mortar 1:2 including ardelite chemical and recess pointed with an admixture of white cement and dholpur stone dust 1:1 and making edges, work in small patches including preparing the existing wall surfaces, in any height complete all as specified and directed by Engr-in-Charge

M&L Granite 20 mm thick of any type work(table rubbed and polished) in steps, jambs,pillars windows cill cooking platform and like including pointing in white/colour cement and pigment to match with shade of granite including bull nosing of external, complete all as specified and as directed. complete all as specified and directed.

S & F plain solid straight chowkhat & frame 2nd class hardwood framed, wrought, rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed.

M&L for 5.5mm thick tinted glass ordinary quality and glazing with clips/beads etc, exceeding 0.5 Sqm in door/window frame etc, complete all as specified and directed.

S & F 125 mm cast Brass butt hinges with mild steel hinge pin , bright polished and fixed type B12 complete all as specified and directed.

S & F door closer hydraulically regulated, design No 3 universal type suitable for door shutter of any width and of weight 61 to 80 Kg cast iron body complete all as specified and directed.

S & F 300 mm fancy type Brass handles, cast type, polished bright complete all as specified and directed

S & F brass mortice lock 100 mm 4 lever vertical type with duplicate key and handle set complete all as specified and directed.

M&L for scraping/preparation of new Wooden doors and filling putty or the required hardeners for prepration of any wooden marks , scratches or scars and treated with putty /primer to obtained similar texture and mallamine coating on the surface with approved shade and make (MRF, Berger, Asian) on the surface doors to obtain smooth and uniform looking complete all as specified and directed.

Taking up or down GI tubing with all connections and fittings of 15mm bore including cleaning for refixing or removal to store, complete all as specified and as directed by Engineer-in-Charge

Taking up or down GI tubing with all connections and fittings of 20mm bore including cleaning for refixing or removal to store, complete all as specified and as directed by Engineer-in-Charge

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps & similar work etc. and cutting chases for cancelled water tubing and making good, cutting exc 10cm but not exc. 20cm girth in brick walls, complete all as specified and directed.

S&F galvanized iron water tubing, ‘medium grade’ 15mm bore, with all fittings such as bend, tee, union etc., fixed complete fixed to walls and ceilings or laid in floors, complete all as specified & directed.

S&F galvanized iron water tubing, ‘medium grade’ 20mm bore, with all fittings such as bend, tee, union etc., fixed complete fixed to walls and ceilings or laid in floors, complete all as specified & directed.

Dismantling water tank of capacity exc 250 and n exc 500 ltr of any type, PVC/RCC/MS complete all as specified and directed.

Dismantling water tank of capacity exc 500 and n exc 1000 ltr of any type, PVC/RCC/MS complete all as specified and directed.

S&F Rotational moulded polythelene white water storage tank tripple layered white coloured, 500 litres capacity (cylinderical vertical with closed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including 20mm for ball valve brass high pressure, with polythene float and fly nut complete all as specified and directed.

S&F Rotational moulded polythelene white water storage tank tripple layered white coloured, 1000 litres capacity (cylinderical vertical with closed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including 20mm for ball valve brass high pressure, with polythene float and fly nut complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

Supply and fix in repair Vitreous china wash down water closet pan (Pedestal pattern incl one toilet paper holder, one health faucet and jet integrated controlled by two way angle valve) incl plastic water closet seat white colour closed pattern with flat bottom and cover and MS CP aluminium/PVC hinging devices complete all as directed and specified by Engr-in-charge.

S&F in repairs coloured vitreous china wash down water closet with cascade type fitting with syphonic action dual type flushing cistern in single piece pattern with inlet, ball valve, float and double push button, incl fixing bolt, plastic water closet seat cover closed pattern with bottom and cover and mild steel chromium plated hinging device with one toilet paper holder, one health faucet and one CP jet spray with 2 x 1 m CP flexible tube complete all as specified and directed.

S&F in repairs, PVC valveless, dual type, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified and directed.

S&F in repairs, wash hand basin vitreous china flat back 550 x400 mm size white, first quality, with and includingPVC waste coupling 32mm size, PVC waste pipe 32mm bore, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets complete fixed to walls complete all as specified and directed.

S&F in repairs, 15mm bore, WHB mixer, fancy type, chromium plated, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered `Hot’ or`Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repairs stop valves, 15mm bore, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specified and directed.

S&F in repairs PVC connection 15mm dia, 600mm long, hot water grade with brass chromium plated nuts and washers at both ends, complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose of 125mm size with or without swivel joints with arms suitable for 15mm bore pipe, complete all as specified and directed.

S&F in repairs bib tap, 15mm bore, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair wall mixer fancy type cast copper alloy chromium plated high pressure with crutch or butterfly handle non telephonic complete all as specified and directed.

S&F in repairs towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F sheet glass corner set of 5.5 mm thick glass of 3 pieces as per sample approved by Engr -in-charge all as specifed and directed.

S&F sheet glass 5.5 mm thick WHB Shelf 600 mm long and 125 mm wide as per sample approved by Engr -in-charge complete all as specified and directed.

S&F in repair PVC bath room cabinet of size 300 x 450 mm x 100 mm with mirror complete all as specified and directed.

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

M/S VISHNU ENTERPRISES

M/S Shree Ram Enterprises