PROVN OF SHED AT MAIN GATE AND IRON GRILL DOOR AT VARIOUS OFFICE ST 41 WEU A KHASA UNDER AGE I AF AMRITSAR

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; including all necessary drilling, bolting or riveting, etc., conforming to Fe-290 Gde E-165

S & F in repair for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Supply and fixing in repair punched tape concertina coil 610mm dia made with high tensile strength galvanized mild steel wire 2.60 mm dia as per IS 4454 strip material (galvanized MS strip as per IS-1730) upto 3 metre height of wall with angle iron 'Y' shaped placed 2.5metre to 3 metre apart and with 9 horizontal R.B.T stud tied with G.I staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron with reinforced barbed tape (RBT)/ spring core (2.6mm dia) wire minimum barb 9mm width, loop spacing 250± 20mm, coil length 9mm and fixed in position , complete all as specified and directed. . Note :-(i) The make shall be got approved by GE confirming to the specification before procurement. (ii) Mild steel angle (Y-Shape) shall be measured and paid for separately.

Demolition of brick work built in cement mortar including all quoins,arches pillars etc all as specified and directed by Engr-in-Ch.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for

M&L Brick work with sub class "B" bricks, straight or curved on plan exc 6 m mean radius , built in CM 1:4

M & L for PCC 1;4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete etc.

M&L for Rendering 15mm thick in cement mortar 1:6 on brick or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for Rendering 10mm thick in cement mortar 1:3 on brick or concrete surfaces of ceiling even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L 15 mm thick cement plaster in cm 1:4 mixed with liquid water proofing compound @ of 2% as on other than fair face of brick or concrete surface finished surface even and fair all as specified and directed Note : Supply only water proofing liquid shall be measured and paid separately.

Supply only liquid water proofing compound to mixed with cement mortar etc complete all as directed.

Preparation of Newly Plastered surfaces of Wall and applying Two coats of Oil Bound Distemper all as specified and directed.

Preparation of Newly Plastered surfaces of celing and applying Two coats of Oil Bound Distemper all as specified and directed.

Material and labour for applying two coats of Acrylic weather coat emulsion paint on walls/ceiling/facias/ramp Surface etc in disruptive pattern having percentage of Six- colour as 29.04% of RGB Value (143, 152, 113), 22.48% of RGB Value (112,139,86), 14.98% of RGB value (123,137,126), 13.80% of RGB Value (84,97,75), 14.15% of RGB Value (123, 137, 94) and 5.55% of RGB Value (206,193,141) as per sample approved by AGE(I) for building of height upto 7.5 meter, over and including a coat of alkali resistance primer complete all as specified and directed. Note:- The rate quoted by contractor is demmed to include preparation of surfaces and necessary scaffolding for painting upto required height.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5sq.m each and refixing in same opening complete all as specified and directed.

Taking down chowkhat with shutters of size exc 1.5 Sqm but n.exc 4 Sqm (without taking off shutters from the frame) and refixing in same opening complete all as specified and directed.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M & L for Reinforced cement concrete (M-25 design mix) using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M& L for Reinforced cement concrete (M-25 design mix) using 20 mm graded aggregate in Columns, pillars, piers, posts and struts

M & L for Reinforced cement concrete (M-25 design mix) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

TMT bars 10 mm dia and over , cutr to length , bent to shape required , including cranking , benidng spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirmin to

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M & L Formwork Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batte

M & L Formwork to sides of pillars, posts, struts, piers, columns and stanchions

M & L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick

M&L two coats of synthetic enamel painting on new steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of previously untreated surfaces all as specified and directed by EIC.

M & L for PCC 1:3:6 type C-1 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete etc.

S&F Carbon steel (Finishd with blackodised/Hot dip galvanized) L shaped anchor bolt/foundation bolts ASTM F1554 Gd 55 screwed one end, with 2 hexagonal or square nuts and 2 washers,the other end enlarged, and jagged or lewised, but Diameter of bolt 25mm and length of bolt 1050 cm long or as required at site complete all as specified and directed.

S&F joist, channel, steel tube of any size as per requirement (IS Ref 1161:1998) sections fixed independently, with or without connecting plates etc. for compression members of shed with riveted, bolted or welded attachment complete all as specified and directed by Enge in charge.

S&F Rolled MS Gde Fe-410-S in Plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed.

M&L and fabrication of mild steel work in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

M & L for Terrazzo tiles 20cm x 20 cm x 20mm thick, in mixure of Grey and whhite cement with no pigment with size of chips upto 6 mm; set jointed and pointed in neat cement slurry in floors, and cut and polished over 15 mm thicck screed bed in CM 1:4

M & L for Terrazzo tiles 20cm x 20 cm x 20mm thick, in mixure of Grey and whhite cement with no pigment with size of chips upto 6 mm; set jointed and pointed in neat cement slurry on vertical surface as in skiting , dados and riser and steps over 10 mm thicck screed bed in CM 1:3

Demoliton of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed by Engineer-in-Charge

Factory Made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 gradecomplete all as specified and directed

M&L 25mm sand filling under floor incl watering and consolidation complete all as specified.

M&L 100mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggr as in sub base all as specified and directed

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and bulit in cement mortar (1:4) 20 mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S & F 110 mm bore PVC (SWR) bends of any radius.

S&F Anodised aluminium frames for ceiling, windows,ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified.

Excavating in post holes( or similar holes) each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth of broken rubble mixed with earth around , in layers not exceeding 25 cm, watring, and removing surplus soil to a distance n.exc 50 m and making good surface

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Hard / Dense soil complete all as specified and as directed.

Returning,filling in trenches including spreading watering and well ramming in layers not exc 25cm thick in soft.loose soil complete all as specified and as directed .

Removing excavated materials to a distance not exc 50m and depositing where directed by EIC at a levlel not exc 1.5 m above the starting point.

Material and labour in repair for Point wiring for One light point, controlled by one switch 5 Amp one-way complete with 1.5 Sq mm (nominal area) PVC insulated, unsheathed and multi strand copper conductor FRLS cable (ISI marked) drawn into and including PVC concealed conduit (medium quality) and conduit fittings including 1.5 Sq mm PVC insulated unsheathed and multi stranded copper conductor FRLS cable as earth wire to common earth and connecting to earth dolly including MS sunken box covered with 3mm thick bakelite laminated sheet top cover and machine made brass screw and washers etc complete all as specified and directed:-

(a) For one light/fan/bell point controlled by one 6 Amp one way switch.

(b) All as per item No. 1 hereinbefore but wiring for one 3 pin 6 Ampere socket outlet point on the same board, controlled by other switch complete all as specified and directed.

(c) All as per item No. 1 hereinbefore but wiring for one 3 pin socket outlet 6 amps independent board.

All as per item No 1 hereinbefore but with 2.5 Sqmm size cable multy stranded FRLS copper wire unsheathed for one 3 pin socket outlet 16 Amp on independent board including 1.5 Sq mm PVC insulated unsheathed and multi stranded copper conductor FRLS cable as dolly completed all as specified and directed by Engineer-in-charge

S & F of in repair switch piano flush type single pole one-way 6 Ampere complete all as specified and directed.

S & F in repair of switch piano flush type single pole one-way 16 Ampere complete all as specified and directed.

S & F in repair of 6 Ampere socket outlet flush type, multi purpose suitable for 2 and 3 pins (Total 5 Pins) complete all as specified and directed.

S & F in repair of socket outlet two-in-one, 3 pin each suitable for 6 and 16 Ampere flush type with shuttered complete all as specified and directed.

S & F in repair of ceiling rose, surface bakelite, 65 X 50 mm, 3 terminals complete all as specified and directed.

Supply and fixing LED tube light fitting 1x20 watts Aluminum housing and milky diffuser with PVC insulated flexible copper cable from ceiling rose to tube light fitting complete all as per specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver,holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. complete all as per specified and directed.

Supply and fixing SMD LED panel recess/surface suspended mounting 12 watt round shape LED ceiling light with extruded aluminium housing and milky diffuser including connecting up twin core twisted flexible copper conductor cable with suitable size of 230 volts, 50 Hz complete all as specified and directed

Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as per specified and directed.

S & F in repair sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 8 ways including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and as directed including necessary brick work and plaster to match with the existing surface complete all as specified and directed.

S & F in repair MCB DP, 240 Volts, B curve, 10 KA, 40 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed

S & F in repair MCB single pole, 240 Volts, B curve, 10 KA, 6 to 32 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed

Earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and salt in alternate layers 25 mm dia light grade GI pipe,funnel,wire mesh.concrete 1:3:6 type C-1 for pit and RCC pit cover. PCC pit shall be provided 50 cm away from earth pit and not on the earth pit itself. The extra cost of the water- ing pipe,bends,elbows shall be included in the unit rate.Note : RCC pit cover shall be precast of RCC 1:2:4type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm. The desired value of earth resistance should be less than 3 Ohm, if not found below 3 Ohm the complete earthing will be redone without extra cost of the govt. Complete all as specified and directed by Engr-in-Charge.

Supply , laying jointing and commissioning, LT under gound cables XLPE insulated screened PVC bedded galvanized steel strip armoured electric powder cable (heavy duty) with alumininum conductor cross sectional are 10 Sqmm 2 core LT, 1100 volts grade , laid in trenches , along poles or passing with through pipe or laid under floor or through/ on walls etc, including taking out old cable with protection bricks and removal, complete all as specified and directed Note:- Excavation and earth work , sand cushioning, brick protection and GI pipes for protection shall be measured and paid for separtely.

Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep for laying of cables and foundation of poles etc. and getting out complete all as spceified and directed.

Returning, filling in trenches (soil) including spreading leveling and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removal of surplus excavation soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L sand cushioning with a layer of dry river sand 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts. Complete all as specified and directed Note: Punned down thickness (overall 18cm), shall be considered for measurement and payment.

M&L, locally available , sub class 'B' bricks (old size) laid flat and dry in trenches over the cable for protectionprependicular to the direction of cable adjacent to each other complete all as specified and directed.

M&L, GI pipe light grade 40mm dia bore for cable protection fixed to pole or under road/ pavement, complete including MS clamps, nuts, bolts etc all as specified and directed.

Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit.

M/s Vijay Construction Co.

M/s AKG Engineers & Contractors

MAAN ENTERPRISES

kapoor and co