Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance SMVDU | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
₹11.4 L
EMD Value
₹22,880
Closing Date
17 Feb 2022, 6:00 pmClosed
Executive Engineer
Executive Engineer, Irrigation Division Udhampur
Repair/Renovation of Irrigation Office Building Jal Shakti Irrigation Division Udhampur (Balance Work) Part-II
2022_IFC_160107_1
2nd Time Fresh e-NIT No. 30 of 2021-22
Open Tender
Civil Works
Item Rate
30 days
udhampur
Please refer tender document
3 documents required · 3 mandatory
₹1,000
Yes
Executive Engineer, Irrigation Division Udhampur
₹22,880
Yes
25 Feb 2022
11 Feb 2022
18 Feb 2022
11 Feb 2022
17 Feb 2022
11 Feb 2022
Amount
Dismantling Doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc complete and stacking within 50 meters lead: of area of 3 sqm and below
Taking out doors, windows and clerestory window shutters (steel or wood) includign stacking within 50 meters lead: of area of 3 sqm and below
Providing and fixing angle iron frames for doors, windows and ventilators of mild steeel angle sections of size 35 x 35 x 5 mm joints mitred and welded by angle iron 35 x 35 x 5 mm or 35 x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction fo Engineer-in-charge
Providiing and fixing M.S grills of required pattern in frames of windows etc with MS flats. Square or round bars etc including priming coat with approved steel primer all complete
Fixed to openings/ wooden frames with rawl plugs screws etc
Fixed to steel windows by welding
Providing and fixing panelled or panelled and glazed shutters for doorts, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction fo Engineer- in-charge (Note: But hinges and necessary screws shall be paid separately) second class teak wood
30 mm thick for windows
35 mm thick for doors shutters
Fixing chowkhats in existing opening including embedding chowkhatws in floors or walls cutting masonary for holdfasts, embedding holdfast in cement concrete bloks of size 15 x 10 x 10 cm with cement concrete 1:3:6 ( 1 cement 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Painting two coats of approved wood preservative to sides of Chowkhats and making good that damege to walls and floors as required complete. Including disposal of rubbish to the dumping groundn within 50 meters lead
Door Chowkhats
Window Chowkhats
Renewing glass panes, with putty and nails wherever necessary inluding raking out old putty. Float glas panes of thickness 4.00 mm (weight not less than 10 Kg/sqm)
Renewing glass panes, with wooden fillets wherever necessary: float glass panes of thickness 4.0 mm (weight not less that 10 Kg/sqm)
Demolishign brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50meters lead
Demolishing mud phaska in terracing and disposal of material within 50 meters lead
Repair to plaster of thickness 12 m to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead. with cement mortor 1:4 ( 1 cement: 4 fine sand)
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies, shelved, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curring but excludign the cost of centering, shuttering, finishing and reinforcement with 1:1.50:3.00 (1 cement 1.50 coarse sand: 3.00 graded stone aggregade 20 mm nominal size)
Extra for concrete work in superstructure above floor five level for each four floors or past thereof
Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete above plinth level cold twisted bars
Dismentaling of spouts and their refixing after completion of concrete work (C.I bends and PVC pipes same material to be reused) including replacing he damaged PVC pipes. (length = 18 mtrs) (RATE TO BE QUOTED BY THE CONTRACTOR) (Commplete Job)
Providing and fixing wire gauze shutters using galvanized MS wire guage of average width for aperture 1.4 mm in both directions with wire of dia 0.63 mm for doors, windows and clerestory windows with ISI marked M.S pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge. Second class teak wood
Providing and fixing ISI marked oxidized MS tower bolt black finish. (Barrel type) with necessary screws etc omplete
Providing and fixing ISI marked oxidized MS hangles conforming to IS: 4992 with necessary screws etc complete
Proviiding and fixing oxidized MS casement stays (straight peg type) with necessary screws etc complete. 200 mm weighting nto less than 120 gms
Providing and fixing bright finished brass 100 mm mortie latch and lock fix levers and a pair of lever handless of approved guality with necessary screws etc. complete
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc complete
Providing and fixing bright finished brass 100 mm mortiee latch and lock, ISI marked, with siz levers and a pair of anodized (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc complete
Re-lettering with black japan paint of approved brand and manufacture
Extra labour required for removing rubbish, Mulba and Bushes/ weed clearance etc including uprooting of rank vegetation of branch cutting of big trees in the premises of Divisional Office. 08 mazdoor for 02 days (16 Mazdoor) Complete Job
Providing and laying vitrifid floor tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, alid in 20 mm thick cement mortor 1: 4 ( 1 cement : 4 course sand ) including grouting the joints with white cement and matching pigments etc complete size tile 600 x 600 mm
Providing and fixing 1st quality ceramix glazed wall tiles conforming to IS: 15622 (Thickness to ber specified by the manufacturer) or approved make in all colours, shades except burgundy, bottle green, black of anu size as approved by Engineer-in-charge. in skirting, risers of steps and dados over 12 mm thik bed of cement mortar 1:3 ( 1 cement 3 coarse sand ) and adjoining with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pgiment of matching shade complete.
Providing and fixing PVC- 150 mm dia pipes confirming to 6Kg/ Cm Sqr pressure (RATE TO BE QUOTED BY THE CONTRACTOR) (Complete Job)
Provision for notice board including its installation. (Wooden) Size .2'.00" x 4'.00" (RATE TO BE QUOTED BY THE CONTRACTOR) (Commplete Job)
Chequerred terrazzo tiles 22 mm thick with graded marble chips of size upto 6 mm I floors, jointed with neat cement slurry mixed with pigment to match the shade of th4e tiles, including rubbing, polishing and curing complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement: 4 coarse sand ). Dark shade using ordinary cement
Carriage of Sand from source to site of work AV 60 km by MT
Carriage of Bajree from source to site of work AV 08 Km by MT
M/s JUGAL KISHORE CONTRACTOR
Ravinder Kumar Govt Contractors
Rajeev Kumar
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .