SPECIAL REPAIR TO TOILET AREA IN DALHOUSIE BARRACK INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA

Amount

SCHEDULE 'A' PART-I (B/R WORKS) Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

Taking down cement plaster on brick or concrete surfaces incl racking out joints, hacking for key, scrubbing down with water etc. all as specified and directed.

Demolition Cement Concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.

M&L Brick Work with Sub-Class ‘B’ fly-ash Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ fly-ash Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed.

M&L 15mm thick cement plaster on brick or concrete walls in cement mortar 1:6 finishing fair and even complete all as a specified and as directed

M&L 10 mm thick rendering on fair faces of concrete surfaces in cement mortar (1:3) as on ceiling finishing concrete surfaces even and smooth without using extra cement complete all as specified and directed

M&L 15mm thick cement plaster in sunken floor in cement mortar 1:3 mixed with water proofing compound as per manufacturer's instructions, finishing even and smooth without using extra cement complete all as a specified and as directed. (NOTE: Water proofing compound shall be measured and paid separately)

M&L for preparation of wall surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation of ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment on walls and applying two coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment on ceilings and applying two coats of white wash complete all as specified and directed.

M&L preparation of old treated steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Chipping of unsound /weak concrete materials including cover plaster from RCC structural member i.e. slabs, beams, columns, lintel, chajja, fins, facia etc. of 50 mm average thickness (Any storey/ height of building/ structure) including tapering all edges, making square shoulders of cavities by air or sand blasting etc and cleaning of exposed concrete surface and reinforcement bars, lightly picking materials by air blasting or sand blasting including removal of foreign materials, loose concrete/aggregate etc and disposal of all debris out side of MOD land and complete all as specified and as directed by Engr-in-Charge. (NOTE: Measurement shall be considered for the surface area of RCC member)

Deduct / Add for below / over 5mm or part thereof thickness for item No 03 above (Any storey/ height of building/ structure)

M&L for applying chloride free rust removing chemical on rusting steel reinforcement bar as per manufacturer's specification and removing all rust from steel reinforcement bar by wire brush & sand/emery paper (after 24 hours of application of rust remover) and cleaning the area thoroughly by water with the help of pressure jet and allowing it to dry and making the reinforcement bar totally rust free (for any storey/ height of building/ structure) complete all as specified and as directed. (Make of Rust removing chemical :- Reebaklens RR of FOSROC or equivalent product other makes specified in tender) (NOTE: Surface area of cleaned steel reinforcement shall be measured for payment)

Material and labour for introducing new mild steel TMT reinforcement bars up to 12 mm dia for structural connection in RCC beams, columns, lintel and slabs (for any storey/ height of building/ structure) including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and up to 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges as per manufacturer's instructions etc all as specified and directed. (NOTE : Quoted rate is deemed to inclusive of the cost of reinforcement bars) (Make of epoxy chemical : Lockfix E75 of FOSROC / Hilti HY 150 or equivalent product other makes specified in tender)

M&L for preparation of old existing corroded and new introduced reinforcement surface (at any storey/ height of building/ structure) by brush and application of two component epoxy based zinc rich primer, of minimum specific gravity 1.75, adhesive bond strength with steel as 1.50N/mm2, as a protective coating to steel reinforcement bars in concrete with total zinc content in dry film >90% by volume and DFT per coat >50 microns complete all as specified and directed. (Make- Nitozinc primer of FOSROC or equivalent product in other makes specified in tender) (NOTE: Surface area of steel reinforcement shall be measured for payment)

M&L for application of two component structural grade polymer modified reinstatement mortar of compressive strength, flexural strength shall not be less than 45 MPs at 28 days, 7MPs at 28 days respectively (maximum coverage area 1.3 sqm per 25 kg pack @ 10 mm thickness) over a coat of epoxy bonding agent on existing surface for strengthening of beams, slabs & other structural elements of average thickness 25 mm and mortar shall be applied in layers n.exc 6 mm thick in layers and including surface preparation as per manufacturers instruction complete in any storey/height of building/structure, all as specified and as directed. Note :- This item shall be executed where shuttering is not possible or for small patch repairs of structural members. (Make :- Renderoc S2 of FOSROC or equivalent product in other makes specified in tender)

M&L for applying of high efficiency polymeric resin base film forming curing agent/compound over concrete surface and maximum coverage area 5.00 Sqm per litre as per manufacturers instruction (for any storey/ height of building/ structure) complete all as specified and as directed. (Make:- Concure LP90 of FOSROC or equivalent product in other makes specified in tender)

M&L for providing cementitious grouting admixture with the cement slurry at a dosage 225 ml per bag of cement and injecting with high pressure by a pressure grouting pump through non return PVC nozzles prefix with rapid setting cementitious plugging mortar to fill all possible pores and gaps left within the old concrete mass. When the flow of grout stops or shows refusal or grout flows out from the adjacent nozzle, pumping to be stopped and the nozzle to be tied up and allowed to set for 24 hours. The PVC nozzles to be sealed off with quick setting cementitious plugging mortar. Grouting operation to be carried out through next nozzle till the entire area is covered. The grouting holes to be finished by removing the protruded portion of nozzles and finishing flush with the surface, complete in any storey/height of building/structure, as per manufacturer's instruction as specified and as directed. (Make of Grouting admixture :- Cebex 100 of FOSROC or equivalent product in other makes specified in tender)

Cutting channels, grooves or rebates n.exc 15 cm girth, and trimming surface with or without reinforcement cutting.

M&L of treatment of existing wall surface with tartaric acid or oxalic acid to remove all the existing salt from the surface then rinse the entire wall surface and applying of 15mm thick two component structural grade polymer modified reinstatement mortar of compressive strength, flexural strength shall not be less than 45 MPa at 28 days, 7MPa at 28 days respectively (maximum coverage area 1.3 sqm per 25 kg pack @ 10 mm thickness) over a coat of epoxy bonding agent on existing surface and mortar shall be applied in layers n.exc 6mm thick in layers and including surface preparation as per manufacturers instruction complete all as specified and as directed. (Make of polymer modified mortar :- Renderoc S2 of FOSROC or equivalent product in other makes specified in tender) (Make of bonding agent :- Nitobond EP of FOSROC or equivalent product in other makes specified in tender)

M&L for machine cut kota stone slab flooring 18-20 mm thick over 20 mm thick screed bed in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed by the Engr-in-Charge.

-ditto- but kota stone in riser of steps, skirting etc fixed over 10 mm thick screed bed in cement mortar 1:3 complete

M&L for providing 25 mm thick, Plain Cement Concrete (1:2:4) type B1 (using 12.5 mm graded aggregates) as in sub base of floor completed all as specified and directed.

M&L joint free non skid ceramic 7 to 8 mm thick coloured digital tiles, joint free, (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment as in floor, laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

-ditto- but tiles of size exc 0.06 but not exc 0.11 sqm each

M&L glazed coloured ceramic digital tiles in vertical surface 350 X 450 X 7 mm or 350 X 250 X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar 1:3 complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each all as directed.

M&L for Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per manufacturer's specification complete all as specified and directed.

M&L mild steel small articles such as flat iron 25x3 mm thick for hold fasts etc, conforming to Fe 410-0 or 310-0 complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) for fixing of holdfasts, finished to match with existing surfaces including necessary formwork complete all as specified and directed.

S&F 100 mm long aluminium hinge with mild steel hinge pin anodised type C-21 for PVC door complete all as specified and directed.

S&F 150 mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 200 mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Taking up or down steel water tubing 15 mm bore incl connection , cleaning etc

.-ditto all as per item No. 41 here-in-before but 20 mm bore

.-ditto all as per item No. 41 here-in-before but 25 mm bore

.-ditto all as per item No. 41 here-in-before but 40/50 mm bore

S&F tubes 15mm bore medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

.-ditto all as per item No. 45 here-in-before but 20 mm bore

.-ditto all as per item No. 45 here-in-before but 25 mm bore

.-ditto all as per item No. 45 here-in-before but 40 mm bore

.-ditto all as per item No. 45 here-in-before but 50 mm bore

S&F gun metal gate valve with iron wheel head, ISI marked, screwed both ends for iron pipe for 20 mm bore complete all as specified and directed.

.-ditto all as per item No. 50 here-in-before but 25 mm bore

.-ditto all as per item No. 50 here-in-before but 40 mm bore

.-ditto all as per item No. 50 here-in-before but 50 mm bore

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches/or fixed on walls, of 100 mm internal dia complete all as specified and as directed.

All as per Item No. 54 above, but for 150 mm bore cast iron/RCC pipes

All as per Item No. 54 above, but for 200 mm bore cast iron/RCC pipes

S & F Cast iron (sand cast) soil, waste and vent pipes 100 mm bore of any length with or without ears with cement joints all as specified laid in trenches or in floors complete all as specified and directed.

All as per item No 57 here in before but 150mm bore

All as per item No 57 here in before but 200 mm bore

All as per item No 57 here in before but 100mm bore fixed to walls

All as per item No 57 here in before but 150mm bore fixed to walls

All as per item No 57 here in before but 200 mm bore fixed to walls

S & F CI bend (any radius), diminishing pieces or tapers (larger bore measured) for 100 mm bore pipe complete all as specified and directed.

All as per item No 63 here in before but for 150mm bore pipe

All as per item No 63 here in before but for 200 mm bore pipe

S&F CI branch piece single (equal or unequal) with oval access door for 100 mm bore pipe complete all as specified and directed.

All as per item No 66 here in before but for 150mm bore pipe

S&F CI bend 100 mm bore with oval access door complete all as specified and directed.

S&F 100 mm bore cast iron (sand cast) Cowl, complete all as specified and directed.

S&F 100 mm dia CI sanitary connection socket to fit WC outlet complete all as specified and directed.

S&F for cast iron floor trap/nahani trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate, 100mm dia outlet complete all as specified and directed.

S&F 150 mm dia CI (sand cast) branch piece, with or without ears, complete all as specified.

S&F Vitreous china, white, half stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe complete all as specified and directed. (Make of Urinal : CERA, Model: CARYS / HINDWARE, Cat No: CORTO / PARRYWARE, Model: Aquaseal N )

-ditto- but full stall urinal (Make of Urinal : CERA, Model: CAPRIANA / HINDWARE, Model: FLAT BACK LARGE / Jaquar, Cat No: URS-WHT-13261/PARRYWAYR, Model: New Magnum)

S&F in repair vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0117 / HINDWARE, Cat No. 20004 / JAQUAR, Cat No. CNS-WHT-OP01 / CERA, Model: COVY)

S&F in repairs vitreous china (coloured) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK)

S&F in repair White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Symphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected items complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART or equivalent model in COMMANDER )

Supply and fix in repairs Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON)

-ditto- all as per Item No. 78 here in before but 600mm long. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D or equivalent model in JEXON)

S&F in repair Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) and making all necessary connections, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. (Make of WHB : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 / CERA, Cat No: S2040141) NOTE: Waste pipe and coupling shall be measured separately

S&F 5.5mm thick looking mirror of size 450mmx600mm over AC building board or commercial ply wood and fixed with PVC/wooden plugs with CP brass screws and cup washer complete all as specified and directed.

S&F 15mm dia soap dish, square, acrylic body with chromium plated base complete all as specified and directed. (Make : Jaquar, Cat No : AKP-35731P / PARRYWARE, Cat No: T6403A1 / ESS ESS, Cat No: AC-103 / PRAYAG, Cat No: BA-35 or equivalent model in CERA /HINDWARE)

S&F in repairs toilet paper holder, surface type with flap incl taking down existing holder complete all as specified and directed. (Make : JAQUAR, Cat No : CAN-1153N / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-38 / ESS ESS, Cat No: AC-506 / HINDWARE, Cat No: F880003)

S&F in repair CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C / HINDWARE, Cat No: F850003 / CERA, Cat No: F8060302/ PRAYAG, Cat No: BEA-26)

S&F 32mm bore Chromium plated brass waste coupling for WHB, as in repair complete all as specified and as directed. (Make ESSCO, Cat No: ALE-544FT / PRAYAG, Cat No: BEA-15 / CERA, Cat No: F8050102 / HINDWARE, Cat No: F850001)

S&F 32 mm bore PVC corrugated waste pipe, 800 mm long for wash hand basins complete all as specified and directed. (Make: PRAYAG, Cat No: 327 or equivalent make as approved by GE)

S&F in repair chromium plated Hand shower (health faucet), ABS body with 1.0 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : PRAYAG, Cat No: BEA-87 / CERA, Cat No: F8030107AB / JAQUAR, Cat No : ALD-CHR-585 / ESS ESS, Cat No: C-232Y /HINDWARE, Cat No: F160068)

S&F in repair Chromium plated brass Pillar tap, fancy type. with aerator, fixed to wash hand basin, complete all as specified and directed. (Make : Ess Ess, Cat No: C-201B / JAQUAR, Cat No: CON-021KN/ PARRYWARE, Cat No: G1402A1 / PRAYAG, Cat No: 9204/ HINDWARE, Cat No: F330002CP / Cera, Model: OCEAN)

S&F in repair Chromium plated brass Bib cock with wall flange, fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Ess Ess, Cat No: C-209 / JAQUAR, Cat No: CON-107KN/ PARRYWARE, Cat No: G1405A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9208 /HINDWARE, Cat No: F330041)

S&F in repair, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : JAQUAR, Cat No: CON-083FTK / PARRYWARE, Cat No : G1461A1 / ESS ESS, Cat No: T-108 / CERA, Model: OCEAN / PRAYAG, cat No: 9218/ HINDWARE, Cat No: F330052)

S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: CON-59KN / PARRYWARE, Cat No: G1453A1 / ESS ESS, Cat No: C-206 / CERA, Model: OCEAN / PRAYAG, Cat No: 9210 / HINDWARE, Cat No: F330043)

S&F stop cock cast copper alloy, fancy type, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or union for pipe 15mm bore, chromium plated complete all as specified and directed. (MAKE : PRAYAG, Cat No : PIS-26/PIS-28 /ESS ESS, Cat No: C-253/c-253A / ESS ESS, Cat No: DLX 513A/513B)

S&F in repair chromium plated brass over head shower rose with arm (premium quality), with 3 flow, fixed to 15mm bore of iron pipe including taking down existing shower complete all as specified and directed. (Make : CERA, Cat No: F7040103 (for arm) & F7020305 (for shower) / PARRYWARE, Cat No: T9802A1 (for arm) & T9986A1 (for shower)/ESS ESS, Cat No: OH-104A / HINDWARE,Cat No: F160051)

S&F, Tubular towel rail (premium quality), 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / ESS ESS, Cat No: AC-101 / CERA, Cat No: F5004103 / PRAYAG, Cat No: BA-20 / HINDWARE, Cat No: F840013 )

S&F in repair for mild steel stack clamps, fabricated out of 50 x 5 mm flat iron and 16 mm dia round iron stay, including suitable size bolts and nuts and securing ends of stays to wall or roof for 100 mm dia pipes including painting with two coats of synthetic enamel paint over coat of red oxide primer complete all as specified and directed.

-ditto- but for 150 mm dia pipes

S&F in repairs stainless steel round grating 100 mm dia complete all as specified and directed.

S&F 32 mm bore PVC urinal waste pipe, 800 mm long complete all as specified and directed. (Make: PRAYAG, Cat No: 3271 or equivalent make as approved by GE)

Supply only liquid water proofing compound all as specified and as directed.

M&L for providing two coats of acrylic reinforced cementitious waterproof coating to prevent leakage/ seepage through sunken floor over prepared surfaces as per manufacturer's instructions complete all as specified and directed. (MAKE: Master Seal 550 or equivalent in other makes specified in tender)

M&L polyethylene film, black, 50 micron, laid in floors complete all as specified and directed.

M&L for cement concrete 1:5:10, type E2 (using 40 mm graded stone aggregates) as in filling complete all as specified and directed.

SCHEDULE 'A PART-II (INT ELECTRIFICATION) Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc.complete all as specified and directed.

M&L for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (NOTES: - (i) Where tube light fitting is to be fitted/suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)

All as per item No. 104 above but for one 5 amps switch socket outlet on same board controlled by another switch, complete all as specified and directed (concealed type point wiring with terminal box).

All as per item No. 104 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (concealed type point wiring with terminal box).

All as per item No. 104 above but using 2.5 sqmm single core multi stranded copper conductor FRLS-H PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 2.5 sqmm green FRLS-H PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (concealed type point wiring with terminal box).

PIANO SWITCH, 5/6 AMPS, SINGLE POLE, ONE WAY

S & F new Switch piano, flush type

SWITCH SOCKET COMBINATION OUTLET, 6 IN 1, 3 PIN, 6/16 AMPS,

S & F new switch socket combination outlet, flush type with indicator lamp

SOCKET OUTLET, 5 PIN, 5/6 AMPS,

S & F new socket outlet, flush type

SWITCH SOCKET COMBINATION OUTLET, 3/5 PIN, 5/6 AMPS,

S&F new switch socket combination outlet, flush type

CEILING ROSE, THREE TERMINALS, 240 VOLTS

S&F new Ceiling rose, surface type

FAN REGULATOR, STEPPED TYPE, 5 SPEED CONTROL, 230/240 VOLTS

S&F stepped type electronic fan regulator, flush type

S&F in repairs surface mounted LED luminaire, 1 X 20 Watt in aluminium housing, with LED tube light, operating voltage 180-270 V, with acrylic/polycarbonate diffuser & integrated constant current electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper wire of suitable size incl taking down existing fitting complete all as specified and directed. complying with the following specifications:- (a) minimum efficacy 110 lumen/watt (b) CRI not less than 80, (c) THD < 20% (d) having in built short circuit and surge protection (e) colour temperature not less than 5700 degree K (f) life not less than 25000 hours of operation

NOTE FOR ITEM NO. 114 :- (1) List of approved makes has been provided in particular specifications. Contractor shall ensure that luminaire provided comply with the aforesaid specifications. No claim shall be entertained during currency of work. (2) Contractor has to furnish a replacement warranty of 02 years for LED light fittings complete including lamps from the date of completion of work. The product will be replaced free of cost in following cases :- (a) Manufacturing Defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 metre) below 90% of claimed value of lumen (or lux at 1 metre) of the LED/luminaire. (d) Decision of GE in this regard shall be final and binding. (3) All LED/luminaire shall meet the provision laid down in IS-16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part-II/Section 13. (4) The contractor shall submit the LM-80 and LM-79 test report as specified in Particular Specifications.

Taking down of old Sub main wiring any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.

M&L for sub main wiring with 4 run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through and including PVC conduit (medium grade) of suitable size, surface type complete all as specified and directed. (NOTE : Five runs of single core 10.0 sqmm cable & one run of PVC conduit shall be measured as one unit)

All as per Sr. Item No. 116 above but with two runs of 6.0 Sqmm cable and one run of 6.0 Sqmm as earth continuity conductor in PVC conduit (NOTE : Three runs of single core 6.0 sqmm cable & one run of PVC conduit shall be measured as one unit)

All as per Sr. Item No. 116 above but with two runs of 4.0 Sqmm cable and one run of 4.0 Sqmm as earth continuity conductor in PVC conduit (NOTE : Three runs of single core 4.0 sqmm cable & one run of PVC conduit shall be measured as one unit)

All as per Srl. Item No. 116 above but with two runs of 2.5 Sqmm cable and one run of 2.5 Sqmm as earth continuity conductor in PVC conduit (NOTE : Three runs of single core 2.5 sqmm cable & one run of PVC conduit shall be measured as one unit)

Taking down of Old MCB DB any type any size including MCCB/RCCB/MCBs and disconnecting the serviceable MCBs and keeping in safe custody for reuse at site.

Supply and fixing TPN DB, IP 43 protection, double door (premium quality), 415 volts, 4 way (8+12), with 100 Amps copper bus bar for each phase complete all as specified and directed. (MAKE : L&T, Cat No. DBTPN004DD / LEGRAND, Cat No: 507670 / SCHNEIDER, Cat No. A9HTND04 / ABB, Cat No: E-SHDB M4 / PANASONIC, Cat No: BQS 304H / HAGER, Cat No: VYT04DH)

S&F SPN DB, IP 43 protection, double door (Premium Quality), 240 volts, 4 way, with 100 Amps copper Bus Bar complete all as specified and directed. (MAKE : L&T, Cat No. DBSPN004DD / LEGRAND, Cat No: 507610 / ABB, Cat No. E-SHC M4 / SCHNEIDER, Cat No. NBKRENSNDD04 / HAGER, Cat No: VYS04D)

Supply and Fix, Double Door, Sheet Metal Enclosure for DBs (Premium Quality), for mounting of MCB for 240 Volts, 8 way, with 100 Amps rated copper bus bar, Single Pole & Neutral, complete all as specified and directed. (MAKE : L&T, Cat No. DBSPN008DD / LEGRAND, Cat No: 507611 /ABB, Cat No. E-SHC M 8 / SCHNEIDER, Cat No. A9HSND08 / HAGER, Cat No: VYS08D)

NOTE FOR ITEM NO. 121 to 123 :- (1) Incoming MCCB/RCCB/MCB and outgoing MCBs shall be measured and paid separately as "Supply Only". (2) Quoted rate is deemed to be inclusive of blanking plate for slots remaining blank after fixing of MCBs. (3) DB, MCCB, RCCB & MCB shall be of the same manufacturer.

Supply and fixing MCB, 'C' series, TPN, 415 volts, 63 Amps, breaking capacity 10KA complete all as specified and directed.

Supply and fixing MCB, 'C' series, SPN, 32 Amps, breaking capacity 10KA complete all as specified and directed.

Supply and fixing MCB, 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.

M&L for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed water tubing or concealed conduit sub-main wiring etc and making good, cutting not exc 10 cm girth complete all as specified and directed.

Taking down exhaust fan, 380 mm sweep, any type, for repair/maintenance by opening the fan and oiling, greasing, rewinding coil and replacement of unserviceable accessories and servicing, complete overhauling, re-assembling including hanging in position and connecting up with three core flexible copper wire of suitable size and testing complete all as specified and directed.

-ditto- but for 450 mm sweep exhaust fan

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized steel earth wire 4 mm dia (upto 7.5 meters) by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Figure 15A of IS 3043 :1987, complete all as specified and directed.

Abida Enterprises

DGR CONSTRUCTION

M/S L.R.ENTERPRISES

SHEIKH ENTERPRISE

UNITED ENGINEERS

KWALITY CONSTRUCTION