Construction of 60000 Ltr OHT in Ramamoorthi nagar at Appanaickenpatti H/o Appnaickenpatti Panchayat

Amount

Earth work excavation and depositing on bank with in initial lead lift in HBG soil for foundation etc. complete.

Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyance of all materials to site and labour charges etc. complete.

Supplying and erecting shttering including necessary support for plane surface in foundation Basement and Roof labs strutting height for plane surfaces for floors for RCC column footings columns plinth beam and connected with foundations

Plane Surface

Below ground level upto 3.30m

Above ground level upto 3.30m

Plane 3.31m to 4.30m

Above ground level 6.31m to 7.30m

Curved Surface

Curved surface 0 to 3.30

Curved surface 3.31 to 4.30

Curved surface 6.31 to 7.30

Curved surface 7.31 to 8.30

Square column

Square Column Below GL and Above GL 0.00 to 3.30

Square Column Above GL 3.31 to 4.30

Square Column Above GL 4.31 to 5.30

Square Column Above GL 5.31 to 6.30

Square Column Above GL 6.31 to 7.30

Fabricating and placing the steel grills for reinforcement for all reinforced cement concrete works such as plinth beam, sunshade, roof and floor slabs etc., including cost of steel and fabricating thre reinforcement grills in position etc., complete in all floors (the rate to include the cost of binding wire steel also)

Reinforced Cement concrete 1:1½:3 (One of cement, one and a half of sand and three of hard broken granite stones ) using 20mm gauge hard broken granite stones for all reinforced cement concrete works excluding the cost and fabrication of reinforcement grills in position, shuttering, centering but including laying, vibrating, curing, finishing and providing Mild steel fan hooks in the RCC slab wherever necessary as directed by the departmental officers etc., complete in all respects

1.50m to 4.50m below ground level

0.00m to 1.50m below ground level

0.00m to 4.50m above ground level

4.51m to 7.32m above ground level

7.33m to 10.98 above ground level

Painting two coats with Interior Emulsion & Exterior Emulsion using best quality of Emulsion, Brushs, scaffolding charges etc. complete

Fabrication, supply, delivery and fixing of outside MS ladder wide 45cm made out of 50×50×6mm MS angle for sides and steps in 16mm MS plain rods fixed at 30cm centre to centre welded, jointed etc., providing with suitable side supports, clamps, and locking arrangements provided with one coat of red oxide paint to for providing access to roof top of 60,000 lit.OHT of suitable inclined length, including bottom anchorage and transportation and as directed by departmental officers.

Providing and fixing of RCC inner access ladder in RCC 1:1½:3 (one cement, one and half sand and three aggregates) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centring, shuttering charges, mixing concrete curing etc., to required height and clear width of 45cm consisting of two Nos. of vertical post of 10cm×15cm and step slab of 25mm×25mm etc., complete and as directed by the departmental officers.

Providing PVC ventilating arrangements mosquito proof nylon net with 110mm PVC cowl and as directed by the departmental officers.

Providing manhole cover of size 0.60 * 0.60 m RCC 1:1 1/2:3 with suitable reinforcement 50 mm * 50mm * 6mm MS angles fixed along edges and as directed by the departmental officers.

Provision for pipe connection arrangements for inlet, outlet, scour and overflow etc., including cost of pipes, specials, valve, labour charge for liftin, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint etc., complete as detailed below.

65mm dia GI pipes

65mm dia GI Coupler

65mm dia GI Elbow

65mm dia GM Gate valve

Providing and laying of 60 mm thick high strgnth type of interlockeing bloock in m40 grade size 26*12*6 cm other then grey colour of required size with minimum compressive strength of 40 N/ Sqmm in uniform shape of approved make to be laid in larrying pattern with approved non sticking surface in the top and the rate including levelling the base, preparation of sub base with sand cushion 30 mm thick, laying out the pavement, cut the pavement, cut the pieces t, to fit the edge, vibrating pavers, sweeping the sand grouting, providing transporting, loading unloading and laying of paver block as per standard specifications

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

VIVEKANANDHAN (BID ID -1198119)