Upgradation of Safety System at various Mat. Homes in Eastern Suburban Area.

Amount

Main Fire Pump-Supplying and installing, testing, perfect aligning and proper leveling and commissioning of fire service main pump, of 2820 LPM (Litres/min.) at 88m centrifugal type pump

Jockey Pump-SITC of Jockey Pump of 240 LPM at 88m head

Booster Pump-SITC of Booster Pump of 450 LPM at 88 m head

G.I. Pipes: Providing and fixing in position G.I. Heavy grade 'C' class pipes (I.S. 1239 part I) with necessary clamping to wall beams and ceilings with hangers and clamps anchor fasteners wherever required to firmly support piping-Providing and fixing in position G.I. Heavy grade 'C' class pipes150 mm

G.I. Pipes: Providing and fixing in position G.I. Heavy grade 'C' class pipes (I.S. 1239 part I) with necessary clamping to wall beams and ceilings with hangers and clamps anchor fasteners wherever required to firmly support piping-Providing and fixing in position G.I. Heavy grade 'C' class pipes100 mm

G.I. Pipes: Providing and fixing in position G.I. Heavy grade 'C' class pipes (I.S. 1239 part I) with necessary clamping to wall beams and ceilings with hangers and clamps anchor fasteners wherever required to firmly support piping-Providing and fixing in position G.I. Heavy grade 'C' class pipes 80 mm

G.I. Pipes: Providing and fixing in position G.I. Heavy grade 'C' class pipes (I.S. 1239 part I) with necessary clamping to wall beams and ceilings with hangers and clamps anchor fasteners wherever required to firmly support piping-Providing and fixing in position G.I. Heavy grade 'C' class pipes 65 mm

G.I. Pipes: Providing and fixing in position G.I. Heavy grade 'C' class pipes (I.S. 1239 part I) with necessary clamping to wall beams and ceilings with hangers and clamps anchor fasteners wherever required to firmly support piping-Providing and fixing in position G.I. Heavy grade 'C' class pipes 50 mm

G.I. Pipes: Providing and fixing in position G.I. Heavy grade 'C' class pipes (I.S. 1239 part I) with necessary clamping to wall beams and ceilings with hangers and clamps anchor fasteners wherever required to firmly support piping-Providing and fixing in position G.I. Heavy grade 'C' class pipes 25 mm

WAFER TYPE BUTTERFLY VALVES:WAFER TYPE BUTTERFLY VALVES: -150 mm dia.

WAFER TYPE BUTTERFLY VALVES:WAFER TYPE BUTTERFLY VALVES: -100 mm dia.

WAFER TYPE BUTTERFLY VALVES:WAFER TYPE BUTTERFLY VALVES: -80 mm dia.

Non Return Valves (NRV): Supplying and installing double flange NRV-Supplying and installing double flange NRV 150 mm

Non Return Valves (NRV): Supplying and installing double flange NRV-Supplying and installing double flange NRV 100 mm

Non Return Valves (NRV): Supplying and installing double flange NRV-Supplying and installing double flange NRV 80 mm

Pressure Gauge-Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0- 14 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc

Supplying and installing pressure switch with 12/15 mm Ø isolation valve, G.I. nipple, elbow etc. in an approved manner as per specification

1 st category Cu armoured cables FRLS outer sheathed- 3.5C x 95 Sq.mm

Cable End Termination For Copper Cables – 3.5C x 95 Sq.mm

Supply & installation of Earth conductor of the following sizes to be cleated on wall / columns with nuts & bolts or laid in cable tray / buried in ground including cutting, drilling, tapping, jointing by welding, connecting to equipments, painting to welded portion by black bitumen paint and with all necesary GI hardware & accessories to complete the work-Earthing Continuity Conductors -50 x 6mm GI

1.1 kV grade stranded Cu conductor, XLPE insulated, extruded PVC inner and outer sheathed FRLSHZ, galvanised steel round or strip armoured cables (SP-ME-TS- 6)-2nd category Cu armoured cables FRLSZ outer sheathed- 2C x 1.5 Sq.mm

SUPPLY & INSTALLATION OF ANGLE IRON FRAME WORK (TS-7)-50 x 50 x 6 mm of M.S.angle.

Supplying and installing fire brigade Header of 150 mm Ø, for supplying water in fire tank as per specification

Supplying & installing moulded HDP / Fibre water tank. for -ve suction only, having capacity 1000 ltrs.fitted with necessary accessories complete as per specification

Supplying and erecting 20/25mm Ø G.M.air release cock, with necessary G.I. coupling to be fitted on top of Air vessel or on wet riser as per specification

Supplying and installing Air Vessel of 300 mm Ø 1.5m in height M.S. tank installed inside pump house as per specification

PROVIDING & FIXING OF C.I. GATE VALVE COMPLETE WITH FLANGE, NUT, BOLTS ETC-FIXING OF C.I. GATE VALVE COMPLETE WITH FLANGE, NUT, BOLTS ETC. -150 mm dia.

PROVIDING & FIXING OF C.I. GATE VALVE COMPLETE WITH FLANGE, NUT, BOLTS ETC-FIXING OF C.I. GATE VALVE COMPLETE WITH FLANGE, NUT, BOLTS ETC. -100 mm dia.

Hydrant Valves (HV)-Supplying and installing gun metal single outlet hydrant valve fitted with necessary accessories

Nozzles (NZ)-Supplying Stainless Steel branch Pipe 63 mmØ fitted with 20 mm dia detachable hexagonalnozzle as per specifications

Hose-Providing and fixing in position 2 lengths of 15 M long flexible canvas rubber lined hose reels 63 dia with adapter, branch pipe and nozzle and storing them in metal cabinets with lockable glass shutters and fixing the metal cabinet at ground level in a location where it can be easily spotted including painting etc

MS/CRCA Boxes (BOX)-Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve (size 400 x 400 x 400mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour

Supplying and installing fire brigade Header (Siamese Connection) of 150 mm Ø for supplying water to wet riser system as per specification

Providing coating of Bitumen paint for underground rising main-Providing coating of Bitumen Paint & 4mm thick Wrapping as per IS 10221 for underground 100 mm Ring Main of Fire Fighting System.

Excavating the trenches and refilling,reinstatement of the same after the cable is laid in approved manner (750 mm deep, 600 mm wide),in all types of soils 1 Cu. Mtr. = 2.2 RMT.

Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m high pressure polypropylene (Polyhose) long fitted with necessary accessories complete as per specification

MISCELLENEOUS-Cement concrete foundation using M-20 cement concrete mix with J shaped foundation bolts where required

Supply & Laying of double wall corrugated ( DWC) pipes of HDPE for underground cable protection as per IS 14930 Part II. With necessary connecting socket/couplings, tees of some material at required depth up to 900 mm below road ground surface. backfilling of with light ramming is included in the scope-Supply & Laying of double wall corrugated ( DWC) pipe 120 mm OD / 103.5 mm I.D.

Excavating the trenches and refilling the same after the cable is laid in approved manner (Size of trench: 750 mm deep, 600 mm wide) in concrete/ masonary / asphalt. 1 Cu. Mtr. = 2.2 RMT. And reinstatement.

Providing, detailing, composite fabricating members like Trusses, N-girders, girders, bracings, supports, purlins, runners, and similar structural steel members fabricated using M.S. hollow tubular steel sections (circular & rectangular pipes), of TATA Structura Make or equivalent conforming to IS 1239 part 1 and 2 and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transportion of the same to site, erection of structural steel members for all heights & at all levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding, removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge.

Providing and fixing single skin trapezoidal profiled sheeting 930 - 1020mm cover width 28-32 mm crests depth at 186-250 c/c ( above 195 mm c/c crest distance there will be minimum 2 ribs at the centre for stiffening). The feed material shall be manufactured from AZ 150 (min. 150 gms/sq.mt total on both sides) Zincalume / Galvalume sheets of minimum yield strength of 550 MPa, 0.45 mm BMT, ( 0.5 mm TCT excluding paint coating thickness), metallic hot dip coated with Al?Zn alloy (55% Aluminium, 43.5% Zinc, 1.5% Si ) as per AS 1397 / IS15961 & painted with Super Durable Polyester Colorbond steel XRW or equivalent quality paint system of apporved color, suitable for exterior application conforming to AS/NZS 2728:2007 type-4 / IS15965:class3 of approved make. The sheet shall have a total coating thickness of 35 microns, super durable polyester paint system of 20 microns on exposed surface and 5 micron reverse polyester coat on back surface over 5 micron primer coat on both surfaces. The paint system shall have stable inorganic pigments for color durability. The product will be fastened using no.12-14x55 mm (or as per design requirement ), mechanically coated with 25 micron Zn-Sn alloy or hot dipped zinc coated with min 40 micron hex self-drilling fasteners with EPDM washer of approved make confirms to AS3566:2002 class 3-Bare Galvalume/zincalume sheets for roofing

GYMNASIUM EQUIPMENTS (SP-ME-TS-43)-Rubber mat 2mm thick size 3x5 feet

Earthing (SP-ME-TS-37)-Earthing station with 600 mm x 600 mm x 6 mm galvanised iron plate & 50 mm dia. G.I. pipe, 3000mm long GI pipe (Class B or better) earth pit as per IS 3043. The earth pit shall be provided with watering pipe (Class B) with wire messed funnel, 25x3 GI strip/ / 2X8SWG G.I. wire up to chamber (wire or strip size as per fault level), disconnecting links with 600 x 600 mm (clear) RCC chamber & heavy duty 3mm thick CI chequered plate cover with hinge & stainless steel bolts. Bentonite/ Charcol & Salt shall be provided for earth pits. Excavation, back filling, removal of excess soil is included in the scope

Supply & installation of Earth conductor of the following sizes to be cleated on wall / columns with nuts & bolts or laid in cable tray / buried in ground including cutting, drilling, tapping, jointing by welding, connecting to equipments, painting to welded portion by black bitumen paint and with all necesary GI hardware & accessories to complete the work-Earthing Continuity Conductors -25 x 6mm Tinned copper

Supply & installation of Earth conductor of the following sizes to be cleated on wall / columns with nuts & bolts or laid in cable tray / buried in ground including cutting, drilling, tapping, jointing by welding, connecting to equipments, painting to welded portion by black bitumen paint and with all necesary GI hardware & accessories to complete the work-Earthing Continuity Conductors – Bare Copper Conductor size 12 SWG

AUTO GLOW SIGNAGE-SITC of Auto glow signage for Emergency Fire Exit

AUTO GLOW SIGNAGE-SITC of Auto glow signage for Do not use lift in case of Fire etc.

Providing and fixing the Mechanical Anchor Fasteners as specified below of Hilti Make or equivalent confirming to IS 1367 (Part 3) at required locations and level including drilling the hole, cleaning and anchoring the bolt as per manufacturers specifications etc. complete as directed by Engineer In Charge-M10 x 110

Excavation by using splitters for foundations, substructures, basements, tanks, sumps, walls, chambers, manholes, trenches, poles, pits & general building works in hard rock, reinforced concrete, for depths/lifts upto 1.5M, including drilling, breaking in small pieces, mucking, dressing/trimming the sides, leveling of bottoms, manual dewatering, removing rank vegetation, backfilling in layers not more than 200mm thickness, watering, consolidating, compacting to achieve not less then 97% Modified Proctor density conforming to relevant IS, stacking in measurable heaps for future use within owners space or disposing within an initial lead of 150m as directed by Engineer-in-Charge, loading, unloading, leveling excluding shoring, strutting etc. complete. Note: 1) The rate includes the handling/supporting the existing utilities such as cables, drains, pipes, water mains etc. 2) It also includes the royalty and other taxes if any.

G.I. Pipes: Providing and fixing in position G.I. Heavy grade 'C' class pipes (I.S. 1239 part I) with necessary clamping to wall beams and ceilings with hangers and clamps anchor fasteners wherever required to firmly support piping-Providing and fixing in position G.I. Heavy grade 'C' class pipes 40 mm

G.I. Pipes: Providing and fixing in position G.I. Heavy grade 'C' class pipes (I.S. 1239 part I) with necessary clamping to wall beams and ceilings with hangers and clamps anchor fasteners wherever required to firmly support piping,-Providing and fixing in position G.I. Heavy grade 'C' class pipes 32 mm

Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint of an approved make and colour as per manufacturers specifications to the W.I / G.I. or M.S. pipes of electric, gas or roof rain water down takes and fittings etc. as specified below, at all height and locations as directed including scaffolding, scraping, cleaning old paint and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge.-For pipe more than 100mm dia. and upto 150mm

Hydrant Valves (HV)-Supplying and installing gun metal Double outlet hydrant valve fitted with necessary accessories

Sprinkler-Supplying & erecting vane type water flow detector suitable for detecting flow of water in wet sprinkler pipe of main line or branch lines of 100 mm dia having following features 1) Visual Switch Activation 2) Rugged Switch Assembly 3) Heavy Duty Alluminium pipe Saddles 4) Durable Metal Encloser 5) Steel U Bolts For Secure Mounting 6) Two SPDT ( Single Pole Double Track ) Synchronised Switches 7) Serviceable Without Draining Pipes

Supplying and erecting 15 mm (½") dia. NBCM Body chrome finished quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction and quality conforming to international standards and listed by LPC (formally FOC U.K.) U.L.F.M. of USA or approved and listed by Tariff Advisory Committee (TAC) OF India

Sprinkler-Providng and fixing in position sprinkler guards to protect open sprinkler in basement from mechanical damage.

SITC of Hydraulic flexible pipe of one meter length with size 25mm

Fire B-Form Charges

Mock drill test ( 11 Site Per Year)

CSMC for after completing DLP period of 1st year

CSMC for after completing DLP period of 2nd year

CSMC for after completing DLP period of 3rd year

MAK ENTERPRISES (BID ID -6515870)

AJANTA INNOVATIVE SOLUTIONS LLP (BID ID -6529621)