SPL REPAIR TO BLDG NO P-26/F-04 BLOCK AT SARVATRA TRANSIT FACILITY AND 1 MW (PROVNS OF TOILETS) UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each including iron mangory complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each including iron mongry complete all as specified and as directed.

S & F for Factory made UPVC (white/Off White colour casement (Openable) Door made of extruded profile members with wall thickness of 2.3mm (+/-0.2mm). Window profile members with hollow section with multi chamber. Frame (60mm x 58mm), sash bars (60mm x 110mm). T-profile (One vertical length in between two shutters 60mmx 74mm). Glazing head (35mmx 20mm) will be mitred cut and fusion welded at all corners, including making of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware EPDM gasket 1.2 to +/-0.02mm thick galvanised steel frame (28mmx21.50mm), sash bars (31mmx27mm). T-profile (27x17mm) to be inserted in required profile frame and will be fixed to wall 8mm x 100mm long fasteners. Hardware: casement door handle made of zinc alloy (white powder coated), Corner striker, Secondary Strikers, Cylinder, Door transmission gear made of mild steel with multi point locking system with striker, Hinges of zinc alloy (white powder coated) and with stainless steel wire mesh (0.36mm nominal dia of wire and average width of aperture 1.40mm , complete all as specified and as directed. (Note: The unit rate quoted by contractor includes cost of wire mesh and includes all other connected accessories. Net opening will be measured for payment purpose.)

S & F Factory made UPVC (white/Off white colour ventilator made out of extruded profiles with wall thickness of members as 2.3mm (1-0.2mm). Ventilator profile with hollow section with multi chamber frame (60mm x 62mm) sash bars (42mm x 67mm). Members will be mitred, cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water. Making arrangement for fixing of hardware, EPDM gaskets 1.2, 1-0.2mm thick galvanised steel frame (30mm x 21.50mm). Sash bars (30mm x 18mm) profile to be inserted in required profile frame and will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : Touch lock to be of Zinc alloy (white powder coated), Steel roller system including stainless steel wire mesh complete all as specified and as directed. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)

S & F plain gypsum board panel 12 mm thick on false ceiling (including any design/ cob design as required & pattern as approved by GE) with and including necessary GI frame work for seamless ceiling used with 'T' , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc. of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including two coat of OBD over a coat of 2 -3mm wall care putty (JK/ Birla) including dismantling of walls and celling existing old board (fibre pulp. Insulation etc.)or insulation boards/slabs/blanks any thickness including cover fillets etc. complete all as specified and directed.

Dismantling floor, hearth wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles and rubbish off the premises completed all as specified and as directed

M & L for 18 to 20 mm thick granite (Zed-black colour or any superior quality/colour as approved by GE) table rubbed and polished in jambs, pillars, window cills, cooking platforms, floor , steps, serving counters etc. and like over and including 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching, moulding and diamond polishing, complete all as specified and as directed .

M & L for full body Vitrified coloured tiles any shade 8-10mm thick (square/rectangular) polished, of size 800x1600mm each in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.

M & L for glazed ceramic tiles in vertical surface of size 600mmx1200mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4, complete all as specified and as directed.

S & F Vitreous china wash basin counter oval type size 600x425x195mm, fixed in repairs, under granite slab with all fitting and fixture, complete all as specified and as directed. (Make: Jaquar/ Marc/Kohler)

S&F shower panel 1600x200mm stainless steel complete all as specified & directed. Make :- Jaquar Cat No SHP-SSF-ST88158B or equivalent in MARC/Kohler

S & F in repair Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shank and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete all as specified and directed. (Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP).

S & F in repairs Vitreous china floor mounted WC (cascade) one piece type (Off white) including connection to drain pipe including Seat Cover, CP health faucet, flushing cistern & with 'P' or 'S' trap with all fitting and fixture ,complete all as specified and as directed. (Make : Jaquar or equivalent in Cera / Parryware.)

S & F in repair CP Angle valve of high pressure screwed for iron pipe and fixed, for 15mm (Minimum weight 15mm-90gms complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F in repair two way angle valve 15 mm bore dia or pipe, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for union, complete all as specified and directed. (Make: Jaquar/ Marc/Kohler)

S & F in repair 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.(Make: Jaquar/Marc/Kohler)

S & F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S & F in repairs Soap Dish, any type and size, fixed to plugs with chromium plated brass screws complete all as specified and directed (Make: Jaquar/ Marc/Kohler).

S & F in repairs Towel rack of size 600mm x 350mm cast copper alloy chromium plated fixed with brass screws, complete all as specified and directed. (Make: Jaquar/Marc/Kohler)

S & F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

S&F in repairs Stainless Steel grating jalli with central hole 125mm dia suitable for floor trap for waste pipe, complete all as specified and as directed.

S & F in repairs Toilet paper holder chromium plated with plug and brass screws complete all as specified and directed. (Make: Jaquar/ Marc/Kohler)

S & F white colour rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed threaded lid top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S&F sink (double bowl) made of stainless steel 1mm thick as in kitchen with plugs, washers and waste including bedding in cement mortar on to dwarf walls or including cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, double bowl (each bowl size 410 mm x 330 mm x 160 mm) complete specified and as directed (make ;- Nirali / jayna / diamond)

S&F fancy type sink mixer for mixing hot and cold water with swinging port, screwed for iron pipe,15mm bore complete all as specified and as directed (make Jaquar/ marc/ kohler)

S & F in repair Designer type high quality fancy type looking mirror (8-10mm thick glass) of size as approved by GE fixed to wall with stainless studs, screws , brackets and washers etc. complete all as specified and as directed.

Taking down 15mm steel tubing and connections including fitting complete all as specified and as directed.

Taking down 20mm steel tubing and connections including fitting complete all as specified and as directed.

S&F 20mm bore steel tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.

S&F 15mm bore steel tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.

Fabrication and fixing of modular wardrobe/ cupboard made out of 18 /20 mm thick HDHMR boards with 2 mm thick fabric colour laminated sheet of approved quality and texture on all exposed sides with edge band including providing cabinet for keeping baskets/ drawers etc. completed all is specified and as directed.(Design and pattern as approved by GE) Make:- Action Tesa or equivalent.

S&F for 18 to 20 mm thick HDHMR boards with laminated fabric colour on both sides, fixing in partitions of modular kitchen cabinet and wardrobe/ cupboard, complete all as specified and as directed (Make :- Action Tesa or equivalent

S&F for fancy type stainless steel bright polished handles oval type of size 150 mm size, complete all the specified and as directed.

S&F 50 mm size cupboard locks of brass 2 lever's including keys sets, complete all as specified and as directed

S&F for magnetic catches with steel body 'H' type fixed to shutter, complete all as specified under directed

S&F for soft closure hinges of premium quality, fixed in door/ cupboard shutters complete all as specified and directed. (Make: Godrej/ IPSA/Hettich)

Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including reinforcement required to facilitate demolition upto and including fourth story and on the roof top/mumty/parapet and removal of debris and rubbish out side MoD land complete all as specified and directed.

M&L Rendering 5mm thick in cement mortar 1:3 as in ceiling on concrete surfaces, finished even and fair complete all as specified and directed.

Taking down cement plaster/ duster bed PCC of column, chhajja, parapets of roof, facia, drops etc. and making good with cement plaster 10 mm thick in cement mortar (1:3) with PCC (1:2:4), average thickness of PCC 25 mm as required brushing neat cement slurry with 3 kg of cement per square metre including necessary form work and scaffolding up to 4th floor including fixing of wire netting where required to match the existing surfaces complete all as specified.

M&L for providing and applying the plaster with single component ready to use repair motar (Smart Care repair motar of Asian Paint or equivalent in FOSROC/SIKA/STP) capable of applying 15 mm average thickness in single layer or finishing with trowel with a bond coat : (SBR polymer @ 10% of cement weight) modified cementious Bond coat @ 2.2 kg cement per sqm including taking down existing roof treatment of any type and also taking down cement plaster on brick / concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc. to receive further treatment. completed all as specified and as directed. Note; the application shall be executed on any type of surface and on horizontal/ceiling / vertical area.

M&L for water proofing treatment applying Sikaplan WT 4220 polyolefin flexible homogeneous smooth sheet membrane with a glass fibre reinforcing inlay, WRAS approved for potable water, thermally welded over Sikaplan WT 4300 polyolefin flexible homogeneous smooth sheet membrane with a glass fiber reinforcing inlay, thermally welded over new surface here-in-before at srl item No 42. Ponding test will be carried out by filling 25mm deep water layer on entire surface for a week to check the leakage and corrective measure where required. (Make: SIKA/FOSROC/STP) Notes: (1) The work shall be executed through authorised appplicatot of manufacturer only. (2) Authorised Applicator shall be approved by GE befor starting the work. (3) All materials shall be produced directly from manufacturer. The purchase voucher shall be produced to the Engineer-in-Cgarge for his verification of material. Engineer-in-Cgarge shall deface the original purchage vouchers. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water Proofing treatment for a period of Ten years in favour of GE. A sum equivalent to 2.5% ( Two point five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor's duues as security deposite. The contractor may, however, furnish a fixed deposite receipt in lieu from a Schedule bank pledged in fevour of Garrison Engineer.

M&L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radius built in CM 1:6 including demolition of old bk work, complete all as specified and directed.

Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. including removal of rubbish, vegetation etc. outside complex (MOD land) complete all as specified and directed.

M&L Rendering 15 mm thick in cement mortar 1:4 on fair face of brick work/ concrete surfaces with water proofing compound as per manufacturer's instructions finished even and fair in any position incl scaffolding complete all as specified and directed. (Note: WPC shall be measured and paid separately as supply only under relevent item of this Sch/ BoQ)

M&L Rendering 15 mm thick in cement mortar 1:6 on fair face of brick work/ concrete surfaces and finished even and fair in any position incl scaffolding, complete all as specified and directed.

M & L for preparation of new /old plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including 2mm thick wall care putty. complete all as specified and as directed.

Preparation of newly plastered/unplaster surfaces of walls and ceilings over 2mm thick Birla white/JK white wall care putty again sand papering thus making surface good and applying two coat of oil bound distemper on wall surfaces over a coat of primer, complete all as specified and directed.

M&L for RCC design mix M- 20 as in slabs, supported on walls, landings, balconies and in shelves and the like complete all as specified and as directed

M&L for mild steel TMT bars of 10 mm dia and over cut to length bent to shape required including cranking, bending etc. and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick flat rough to received plaster. Complete all as specified and directed.

M&L for formwork to edges of concrete flats, breaks in floors, window cill, concrete railing, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar works , RCC/PCC band in walls, exc 10cm but not exc 20cm.complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MOD land), complete all as specified and directed.

M&L for 75mm thick cement concrete (1:3:6) type C2 (using 40 mm graded stone aggregate) as in plinth protection laid in bays and surfaces finished even and fair complete all as a specified and as directed.

M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base for flooring or in any position complete all as specified and as directed.

M & L for Coloured Machine pressed precast concrete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-40 Grade with grey cement and pigment laid dry in floor/path over & including 50mm thick sand cushioning after dismantling of existing interlocking tiles of any type complete all as specified and as directed.

M & L for Coloured Chequered cement concrete tiles 30cm x 30cm x 20-22mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigment over and including 15mm thick screed bed in CM 1:6 after dismantling existing chequered tiles of any type complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil. Complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/ loose soil complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soil complete all as specified and as directed.

Demolition and breaking up drain pipes (SGSW/ AC/ RCC) including hunching and benching set in cement mortar for 150mm to 300mm dia pipe, and removal of debris from site and deposited where directed at a distance not exc 1 km from site, complete all as specified and directed.

S&F for 150mm dia salt glazed stone ware pipe, laid and jointed complete with collars complete laid in trenches and tested complete all as specified and directed.

M&L for PCC (1:3:6) Ty C-2 using 40mm graded stone aggregate as in bed to drain pipes of 150mm bore including packing under, and hunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for PCC (1:4:8) Ty D-2 using 40mm graded stone aggregate as in filling and mass concrete complete all as specified and directed.

M&L for PCC (1:2:4) Ty B1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, copings, and the like including weathering, slightly rounded or chamfered angles and throating, incl provn of necessary form work,

S&F in repairs 100 mm dia cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to wall or in floors, complete all as a specified and as directed

S&F in repair 100 mm dia cast iron bends (any radius), diminishing pieces or tapers (large bore measured ) complete all as specified and as directed.

S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.

S & F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.

S & F in repair precast cement concrete type B0 1:2:4 (12.5 mm graded aggregates) louvers and jallies, 50 mm thick ( design and pattern as approved by GE) set in CM (1:4) including all mouldings but excluding frame fixed over bdy wall or walk ways or in any position etc. complete all as specified and directed.

S & F precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed.

S & F factory made for precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592, including demolition of existing MH cover of any type complete all as specified and as directed.

M & L for stainless steel work of Grade-304 as in vertical post/pole, stair case bars/grills, or any other type of works as directed of any type and size (upto a height of 10 Mtrs and 200mm dia) including special shaped washers, channels, plates horizontal/ vertical also ornamental works like designer railing chain, lattoo any type and size as approved by GE and as reqd at site made of hollow tubes or in any other shape as per requirement at site, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary nuts and bolts dash fasteners, stainless steel bolts etc., of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. (Note :- No extra payment shall be made to the contractor for ornamental works of this item).

M & L for non skid coloured tiles any shade 7-10mm thick (square/rectangular) polished, of size 600x 600mm each in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.

All as per item No 59 here-in-before but in hard rock.

Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished,complete all as specified and directed by Engr-in-charge.

M&L for reinforced cement concrete design mix M-20 as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete,complete all as specified and directed by Engr-in-charge.

All as per item No 51 here-in-before but TMT bars 6-8mm dia and over as in stirrups, spacers and binders complete all as specified and directed by Engr-in-charge.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, finished even and fair complete all as specified and directed by Engr-in-charge.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed by Engr-in-charge.

M&L for reinforced cement concrete (design mix) M-20 as in Columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-charge.

M&L for reinforced cement concrete (design mix) M-20 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-charge.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6,complete all as specified and directed by Engr-in-charge.

M&L for sand filling under floors or in foundations including watering and consolidation,complete all as specified and directed by Engr-in-charge.

M&L for hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface,complete all as specified and directed by Engr-in-charge.

S&F for steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed by Engr-in-charge.

S&F for 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5sqm in each pane complete all as specified and directed by Engr-in-charge.

M&L for MS hand rails, half round or other steel section for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, steel door shutter etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165,complete all as specified and directed by Engr-in-charge.

M&L for 1.00mm thick mild steel, plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames); etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required.complete all as specified and directed by Engr-in-charge.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed by Engr-in-charge.

S&F for solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing,complete all as specified and directed by Engr-in-charge.

S&F for factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing,complete all as specified and directed by Engr-in-charge.

S&F for 100mm long SS butt hinges, medium weight, cold rolled mild steel, and fixed,complete all as specified and directed by Engr-in-charge.

S&F for 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed,complete all as specified and directed by Engr-in-charge.

S&F for 150mm long extruded aluminium alloy handles, fabricated type, anodised,complete all as specified and directed by Engr-in-charge.

Supply only liquid water proofing compound complete all as specified and directed by Engr-in-charge.

M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) of size of area not exc 0.16 Sqm of each tile, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6, after dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), complete all as specified and directed by Engr-in-charge

M & L for glazed ceramic tiles in vertical surface of size 300mmx450mm or 300mmx600mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 10mm thick rendering in CM 1:4 after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and directed by Engr-in-charge.

S&F white colour Rotational moulded polyethylene water storage tank 1000 litres capacity, white triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including all fittings complete all as specified and directed by Engr-in-charge.

S & F Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap, plastic seat cover, with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed by Engr-in-charge.

S&F 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern,complete all as specified and directed by Engr-in-charge.

S&F fancy type chromium plated 15 mm dia stop angle cock, cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flinch screwed both ends for iron or for union.complete all as specified and directed by Engr-in-charge. (Make: Jaquar/ Marc/Kohler)

S&F PVC connection 15 mm bore and 45cm long with washers complete all as specified and directed by Engr-in-charge.

S&F fancy type chromium plated bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule,complete all as specified and directed by Engr-in-charge. (Make: Jaquar/ Marc/Kohler)

S&F Vitreous Cliina wash basin, white, flat back, size 630x450mm with waste, chain and plug and porcelain stopper, flush pipe & brackets etc.complete all as specified and directed by Engr-in-charge.

S&F fancy type chromium plated pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge. (Make: Jaquar/ Marc/Kohler)

S& F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe incl waste coupling, urinal spreder & flush pipe complete all as specified and directed by Engr-in-charge.

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)

S&F Gun-metal globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron complete all as specified and directed by Engr-in-charge.

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and directed by Engr-in-charge.

S&F Hubless CI pipes of 100 mm bore (single socketed in any length with rubber ring joints including all fittings/fixtures fixed on wall or in trenches or in floor complete all as specified and directed by Engr-in-charge.

All as per item No 112 here-in-before but 75mm.

S&F Hubless CI 100mm dia (single T), branch piece, equal or unequal provided with access door complete all as specified and directed by Engr-in-charge.

S&F 100 mm bore CI hubless bends/shoes any radius complete all as specified and directed by Engr-in-charge.

All as per item No. 115 here-in-before but 75 mm bore.

S&F UPVC (SWR) 110 mm Nahani trap with grating including jointing to waste pipe in cement concrete complete all as specified and directed by Engr-in-charge.

S&F UPVC (SWR) floor trap, 75mm dia plain including jointing with solvent cement including jointing to waste pipe in cement concrete complete all as specified and directed by Engr-in-charge. all as specified and directed.

S&F CI Hubless 100mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) with ovel access door complete all as specified and directed by Engr-in-charge.

S&F CI Hubless 75mm bore Cast iron cowls

S&F 75 mm pipe, stack clamps out of 50mmx 5 mm flat iron and 16 mm dia round iron stamp including bolts and nuts and securing ends of stays to walls or roof complete all as specified and directed by Engr-in-charge.

S & F factory made for Precast RCC manhole covers of size required at site 100 mm thick medium duty factory made test load 10 tons (MD-10) conforming to IS-12592, complete all as specified and directed by Engr-in-charge.

M&L for PCC (1:2:4) Ty B-1 using 20mm graded stone aggregate as in coping, benching in mahole etc incl necessary form work. complete all as specified and directed by Engr-in-charge. all as specified.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft /loose soil.

M & L 75 mm thick Cement concrete work as in plinth protection type C-1 , 1:3:6 (20mm graded aggregates) laid in alternative panels, filling the grooves with mastic filling using sand and bitumen (1:3), finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for prepration of newly plastered surface of wall and applying 2 coats of OBD over a coat of primer complete all as specified and directed by Engr-in-charge.

M&L for prepration of newly plastered surface of ceiling and applying 3 coats of white wash complete all as specified and directed by Engr-in-charge.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigments, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-charge.

S&F Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed by Engr-in-charge.

Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches, Sockets, holders, ceiling roses, light fitting regulators etc (to be measured and paid separately under relevent item of this Sch as S&F in repair and credit for these item given in credit schedule here-in-after) and making good the disturbed surface all as directed.

Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and fittings such as tees, bends, elbow, and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly including Metal Flush Box, Cover plate with frame, cutting chases and making good disturbed surface in CM 1:3 to match with existing surface for one light point exhaust fan point controlled by one 1-way switch complete all as directed.

All as per item No.132 herein before but one socket outlet point 5 amps on the same board.

All as per item No.132 herein before but one socket outet point 5 amps on the independent board.

All as per item No.132 herein before but with 2.50 Sqmm cable for independent point and using 2.50 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified and directed.

All as per item No.132 herein before but with 4 Sqmm cable for independent point and using 4 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified and directed.

S&F in replacement modular switch flush type, 6 amps one way,SP,230 volts AC complete all as specified and directed. Make-Indoasian shynora,Anchor Roma,Legrand Avtear or equivalent.

S&F in replacement modular socket outlet 6 amps complete all as specified and directed. Make-Indoasian shynora,Anchor Roma,Legrand Avtear or equivalent.

S&F in replacement modular socket outlet 6 & 16 amps complete all as specified and directed. Make-Indoasian shynora,Anchor Roma,Legrand Avtear or equivalent.

S&F in replacement modular switch flush type, 16 amps one way,SP,230 volts AC complete all as specified and directed. Make-Indoasian shynora,Anchor Roma,Legrand Avtear or equivalent.

Supply and fixing in replacement of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 3 module sheet metal enclosure complete all as specified and as directed. Make-Indoasian shynora,Anchor Roma,Legrand Avtear or equivalent.

S&F in replacement modular switch bell push flush type, 6 amps one way,SP,230 volts AC all as directed.Make-Indoasian shynora,Anchor Roma,Legrand Avtear or equivalent.

S&F in replacement modular Step Fan regulator, 70 watts single / double module all as directed.Make-Indoasian shynora,Anchor Roma,Legrand Avtear or equivalent.

S&F in replacement of bell DINGDONG type, 6 Amps, 240 volts, SP all as specified and directed. .

S & F in replacement of Ceiling rose, 3 terminal , pvc/polycabonate, isulated body all as specified and directed.

Material and labour for replacement of submain wiring complete with 2 x 10.0 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 10 sqmm( same specification ) as earth wire complete all as directed.

S & F in replacement surface and wall mounted LED tube light fitting with Aluminium housing & interated electronic driver with tube rod of 20 Watt. slim elegant design.and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed.

S & F in replacement LED energy efficient integrated battens fittings, Aluminium extruded heat sink with shatter proof opal shell of Aluminium housing, 10 Watts, cool/warm white as per site requirement, complete all as specified and as directed.

S&F in replacement of energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as specified and as directed.

S & F of street light bracket incl clamp, nut and anchor bolt etc make to shape for street light fitting made out of GI pipe light grade 25 mm bore 1.0 mtr long on bend to shape the top of wall of existing building complete all as specified and directed.

Supply and fixing in replacement of wall light fitting with and incl 9 watt LED lamp complete all as directed. Cat part also philips comet are equivalent in wipro & Havells.

S&F in replacement of LED Bed Side Flexible Arm lamp 5/6 W complete all as specified and directed.

Supply and fixing in replacement of LED ceiling light fitting 15 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.

Supply and fixing in replacement of LED ceiling light fitting 10/12 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.

Supply and fixing in replacement of LED ceiling light fitting 06 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.

S&F in replacement LED bulk head fitting 6.5 watt, complete all as specified and as directed.

Supply and fixing Flexible LED strip light tubular type, any colour , incl LED AC to DC adopter and making all electric connections complete all as directed.

Supply and fixing AC to DC adaptor for LED strip light tubular type complete all as specfied and as directed

S & F in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connection complete all as specified and as directed.

S&Fin replacement of MCCB 3 pole of capacity 160A, 10KA ics 100% with thermal magnetic release including spreader/thimble of suitable size and making connection complete all as specified and as directed.

S & F in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified and directed.

S & F in replacement of MCB B Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA of capacity 6 to 32 amps complete all as specified and directed.

Supply and fixing in replacement of Isolator SPN , 10 KA,32 Amp, complete all as directed.

S&F in replacement of Ventilating fan 250 mm sweep plastic body type including self cousing louver and making all electric connections, complete all as specified and as directed.

S&F in replacement of wall mounted fan 400mm sweep, Copper winding, 240 Volts. 50 Hz and depositing the old u/s to mes store yard, complete all as specified and as directed.

Taking down of ceililng fan any type size complete with blades, fan clamp etc and depositing to MES store yard after dismentling blade complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value not less than 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Supply and fixing of ceiling fan J hook fastener for ceiling fan all as specified and as directed.

M & L in replacement for ceiling fan down rod fabricated out of MS pipe medium grade 15 mm dia cut to length as per site requirement duly painted white with synthetic enamel paint over a coat of red oxide primer having through hole and cut of suitable size at both end for fixing ceiling fan and clamp etc complete all as specified and as directed

Taking down of geyser any type, size depositing to MES store yard complete all as specified and as directed.

S&F Geyser 25 litre capacity vertical type with steel tank and glass inner linen , 5 star rating complete including fastners for hanging and connection for inlet and outlet upto stop cock, complete all as specifed and as directed.

M&L for taking down electronic energy meter three/single phase and refixing the same after new connection wiring with 10.0/6.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked complete all as specified and as directed.

S&F metalic box for single phase prepaid meter with door glass incl.all type of fixing accessories etc complete all as specified & as directed.

S&F in replacement of rigid non metallic PVC conduit 25 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete surface mounted / concealed and making good the surface all as specified and and as directed.

S&F in replacement of change over switch off load type AC, 415 Volt, TPN 200Amp side handle operated heavy duty in sheet metal encloser complete all as specified and directed.

S&F of Modular TV socket) 01 Module size socket as per site requirement complete all as directed by the Engr-In-Charge.

M&L of Modular Telephone socket Jack 01 Module size (RJ 11 Socket Jack) complete with modular sheet as per site requirement complete all as directed by the Engr-In-Charge.

M&L for TV Wiring with Co axial RG-6 heavy duty PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped suitable for telephone wiring and making all necessary connections from terminal box to TV socket, drawn in and including separate concealed PVC conduit complete all as directed.

M&L of telephone Wiring with twin core PVC insulated, PVC sheathed cable suitable for telephone wiring and making all necessary connections from terminal box to telephone socket, drawn in and including separate concealed PVC conduit complete all as specified and directed.

S & F in replacement ABS Plastic Automatic Hand Dryer (white standarad ) Power-1200W, Speed-1200 R/M ,Voltage-220V ,IPX1,complete all as specified and directed.

Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core.

M&L for sand cushioning to under ground cable provided with layers of snad(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.

Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.

M & L for laying of Galvanised Iron tubes light grade 80 mm bore with all fitting for cable protection at site complete all as specified and directed.

M&L in replacement of Earthing complete with galvanised steel plate electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level , connected to and including galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, washers protected by and including 15 mm bore GI Pipe “light grade” and connected to main test point as directed and including concrete pit in PCC(1:3:6) type C1 precast RCC M-25 (design mix) precast cover slab (54 x 54 x 5 cm) duly reinforced with and including 8 mm dia TMT steel bars @ 150 mm C/C both way, one lifting handle made of 8 mm dia TMT bar embedded in precast cover slab, funnel, wire mesh, 20 mm bore GI medium grade pipe for watering, charcoal and salt in alternate layers, including necessary excavation and earth work any type of soil complete all as specified and shown in electrical plate No. 5 of SSR Part-I including testing on completion complete all as specified and directed.

S&F Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

S&F Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed.

S&F Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

S & F surface and wall mounted LED tube light fitting with Aluminium housing & interated electronic driver with tube rod of 20 Watt. slim elegant design.and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete.

S & F of MCB DB conforming to IP 43 - IK 09 with double door , SPN 8 way complete with din rail Neutral and earthing bar after taking out the oldunserviceable DBs connection complete.

S&F of MCB SP, B Curve type, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as directed.

S&F of MCB SPN B Curve type, 10 KA, 63 Amp, with over load and short circuit protection complete all as directed.

Vipul Construction (BID ID -3386117)

Akhil Enterprises (BID ID -3378483)

GIAN BUILDERS (BID ID -3378086)

M/S Rohit Enterprises (BID ID -3378469)