Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.5 LAccepted-AOC H NO 831 1 HINDU NAGAR TILAKWADI BELGAUM 590006 | BELGAUM | BELGAUM | KARNATAKA | 590006 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹22.2 L+₹2.7 L (14.1%)Rejected-Finance | L2 | Rejected-Finance Second lowest | |
| 3 | L3₹22.5 L+₹3.0 L (15.7%)Rejected-Finance HOUSE NO 254 A LAXMI GALLI SAMBRA BELGAUM 591124 | BELAGAVI | KARNATAKA | 591124 | L3 | Rejected-Finance Third lowest | |
| 4 | L4₹22.9 L+₹3.4 L (17.4%)Rejected-Finance | L4 | Rejected-Finance Fourth lowest | |
| 5 | L5₹29.9 L+₹10.5 L (53.9%)Rejected-Finance HARIPUSHPA APARTMENT BUILDING NO E 1 FLAT NO 01 REST CAMP ROAD DEOLALI CAMP 422 401 | DEOLALI CAMP | NASHIK | MAHARASHTRA | 422401 | L5 | Rejected-Finance Fifth lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
24 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Sambra
GE AF Sambra ATS Sambra Belgaum 591124
REPAIR MAINTENANCE TO FIRING RANGE AT ATS BELAGAVI
2024_MES_648727_1
GE(AF)/SAM/TOK-07 OF 2024-25
Open Tender
Civil Works
Item Rate
180 days
GE AF Sambra
Please refer Tender documents
8 documents required · 8 mandatory
₹500
GE AF Sambra
₹70,000
Yes
7 Jun 2024
1 Apr 2024
26 Apr 2024
1 Apr 2024
24 Apr 2024
19 Apr 2024
Amount
Excavating over areas, not exceeding 1.50 m deep and getting out in soft/loose soil complete all as specified and directed
Screening of Sand and saw dust obtained from Srl item No.1 above by manual or machine by heavy type / big size seive with help of JCB machine complete all as specified and directed
Removing of excavated material exc 250 m but not exceeding 500 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed
Supply only sand and saw dust mixed in proportion 1:1 including depositing and stacking the same as directed by Engineer-In-Charge.
Forming embankments with sand and saw dust spread in layers not exc. 30cm thick and finishing to required slope, size and shape etc, not.exc 1.50 m high from base complete all as specified and directed
Forming embankments with sand and saw dust spread in layers n.exc. 30cm thick, and finishing to required slope, size and shape etc, exc 1.50 m but not exc 3.00 m high complete all as specified and directed
Forming embankments with sand and saw dust spread in layers n.exc. 30cm thick, and finishing to required slope, size and shape etc, exc 3.0 m but not exc 4.5 m high complete all as specified and directed
Surface dressing of not exc 15 cm deep of soft/loose soil including levlling of ground complete all as specified and directed
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard dense soil including nclearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots and trees not exceeding 30cm girth removing rubbish upto 50 meters outside peripheri of the area under clearance complete all as specified and directed.
M&L for complete removal of existing treatment old decorative surface of walls, pilasters, cornices, including necessary preparation of surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed
Demolition of precast concrete block walling, built in cement mortar etc complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description in any position complete all as specified and directed
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description in any position complete all as specified and directed
M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregates) as in mass concrete complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregates) as in surface channels and drains complete all as specified and directed.
M&L for pre-cast cement concrete block masonry with solid blocks of mix 1:3:6 (using 20 mm graded crushed stone aggregates), exceeding 10 cm in width and setting in mortar 1:6 complete all as specified and directed
M&L for plain cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and necessary Use and waste of Form work complete all as specified and directed
M&L for Pre-cast reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in cover slab set and jointed in CM 1:4 including necessary form work complete all as specified and directed.
M&L for TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hoping for columns end and binding with mild steel barber wire (annealed) not less than 0.9 mm dia complete all as specified and directed
Taking down cement plaster on brick / concrete /stone masonry walls etc including racking out joints, hacking for key, scrubbing down with water etc complete including removing rubbish off the premises complete all as specified and directed
M&L for rendering 20mm thick on fair faces of brick work or concrete/stone wall surfaces in CM 1:4 to be finished even and smooth without using extra cement all as specified and as directed.
M&L for preparing of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed
Extra for forming fair finished drain or channel over 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends complete all as specified and directed
Dismantling of stone slabs, tiles and paver blocks of any description or thickness, laid dry or laid dry and pointed in floors, aprons complete all as specified and directed
M&L for precast cement concrete designer tiles, bullnosed, rubber moulded, 25 mm thick set, jointed and pointed in neat cement slurry with white cement & pigment to match the colour of tiles complete all as specified and directed
M&L for 15 mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed
RUDRAYYA I GHANTIMATH
RAHUL SAYAJIRAO DESAI
M/S MAHADEV M PATIL
Vinod Enterprises
M/S ADITYA CONSTRUCTIONS
PURVIK CONSTRUCTIONS
SAMARTH ASSOCIATES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .