WELCOME AND COMPREHENSIVE MAINTENANCE INCLUDING REPAIR TO BR ITEMS TO OFFICERS MD ACCN AT VARIOUS LOCATION UNDER AGE BR-I AT NEW CANTT, PRAYAGRAJ

Amount

Taking down cement plaster on brick or stone walls incl wall tiles etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces even & smooth complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with WPC complete all as specified and directed

M&L for rendering 3 mm thick in CM 1:3 on ceiling surfaces of RCC or brick complete all as specified and directed.

Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed.

M&L for Preparation of newly plaster surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint on new plastered surfaces having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note:- Primer and emulsion to be carried out through air less spray machine.

M&L for Preparation of newly plaster surface of ceiling and applying two coats of white wash complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 using 12.50 mm graded crushed stone aggregate in roof kerbs or mud stops including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

Demollition of cement concrete reinforced of any description and in any position complete all as specified and directed at site by Engineer-in-Charge.

Cutting holes not exc 100 sq cm into or through reinforced cement concrete slabs and chajjas,etc including cutting of reinforcement as necessiated complete all as specified and directed.

M&L for RCC 1:2:4 (Nominal Mix) using 20mm graded crushed stone agg as in Chajjas etc complete all as specified and directed.

Use and waste for Form work to chullah hood, chajjas, kitchen plate form, troughs and similar items including edges finished fair complete all as specified and directed.

Use and waste Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed

S&F for mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, or securing with clips complete all as specified directed.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L wall care putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm, over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and . Sanding of the putty surface with Asian Paints TruCare Wall Sander: L- 01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM not less than 1500, sannding pad of 240 Grit or above having dia of 7"/9" to make the surface free from dust etc. by skilled labour. (Step 1) Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer(Trucare Putty mixier with min 1400 W power havinng mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). (Step 2) Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine(Model: EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041" (Step 3) Allow 6-8 hrs time to dry the putty surface.

M&L for Preparation of old plastered or unplastered decorated surfaces of wall including cornices etc and applying two coats of white wash on wall complete all as specified and directed.

M&L for Preparation of old plastered or unplastered decorated surfaces of ceiling including cornices etc and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for Preparation of old decorated surfaces of wall including cornices etc and applying one coat of distemper oil emulsion white or tinted on wall with roller complete all as specified and directed.

M& L applying two coats of distemper oil emulsion white or tinted on wall over a coat of primer with roller complete all as specified and directed.

M&L for Preparation of old plastered or unplastered decorated surfaces of ceiling including cornices etc and applying one coat of distemper oil emulsion white or tinted on ceiling complete all as specified and directed.

M&L for Preparation of old decorated surfaces of wall including cornices etc and applying one coat of plastic emulsion paint white or tinted on wall complete all as specified and directed.

M&L for applying Two coats of Plastic emulssion paint including primer on surfaces of wall of any description over 10cm width or girth, not otherwise described complete all as specified and directed. Note :- Emulsion and primer to be applied through mechanical means only.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note- Primer and emulsion to be carried out through air less spray machine

M&L for Preparation of old painted wooden surfaces or wood base material of any description not otherwise described,surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of old painted wooden surfaces or wood base material of any description not otherwise described,surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of old painted steel surfaces or steel base material of any description not otherwise described,surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint with paint sprayers as applicable complete all as specified and directed.

M&L for Preparation of old painted steel surfaces or steel base material of any description not otherwise described,surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Removing vegetable growth/plants/shrubs (girth exc 5cm but n.exc 30cm), cutting in brick wall/concrete surface upto tripple story building, carefully without damaging the existing soil ,vent, water supply pipe and removing roots of plants completlely and filling the gaps with cement mortar (1:4) finished with existing surface including all scaffolding ladder etc as required surface are n.exc 0.36 Sqm each complete all as specified and directed.

Demolition of brickwork built in cement mortar including quoins, arches, pillar etc complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4, complete all as specified and directed.

Taiking up or down steel tubing and connections, 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections, 20 mm bore complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubings, cutting not exceeding 10cm girth complete all as specified and directed.

M&L for GI tubing 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for GI tubing 20 mm bore 'medium grade' galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing of old steel tubing 15mm bore pipe and connection in new or old portion (wall, celing etc) complete all as spd and directed.

Refixing of GI tubing 20 mm bore any grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking down rain water / vent pipe of any description including fittings etc. including removal to store, complete all specified and directed.

S&F for PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as specified and directed.

Description same all as per item No 42 here in above but 75 mm bore complete all as specified and directed.

S&F for 110mm bore PVC (SWR) bends, of any radius provided without access door complete all as specified and directed.

Description same all as per item No 44 here in above but 75 mm bore complete all as specified and directed.

S&F for 75mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including securing ends of stays to wall or roof complete all as specified and directed.

S&F for 100mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including securing ends of stays to wall or roof complete all as specified and directed.

S&F in repairs gun-metal gate valve 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Dismantling water tanks capacity exc 250 but n. exc 500 Ltrs complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks white colour tripple layers with thread type locking cover arrangement, 500 ltrs (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed.

S&F in reapairs Ball valves high pressure, with polythene float and fly nut complete, screwed for iron pipe 20 mm bore or brass ferrule and fixed complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floor,wall, aprons etc complete all as specified and directed.

M&L for 25 mm thick plain cement concrete type B0 1:2:4 (12.5mm graded aggregate) as in levelling course of floor and other similar works complete all as specified and directed.

M&L for GVT coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured of tiles including laying of screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed.

M&L for 16 to 18 mm thick granite stone for any type of work in steps, jambs, wall clading, window sill, pillars, cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F in repairs fancy type, chromium plated bib taps, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in 15 mm bore CP central hole basin mixer (swan neck/head type) with regular spout fancy type, cast copper alloy with capstan heads,long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.

S&F in repairs cast copper alloy chromium plated fancy type angle cock, of 15 mm bore complete all as specified and directed.

S&F in repairs 32mm bore bottle trap of PTMT having minimum water seal of 25mm (min weight 32mm-260gms/ 40mm 270gms) complete all as specified and directed.

S&F in repair soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Supply and fix in repair PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia 600 mm long, fixed complete all as specified and as directed.

S&F in repair stainless steel sinks with drainage board of 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwaft wall or including fixing cantilever brackets and connecting union or waste fitting to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm complete all as specified and directed.

S & F in repairs vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts,plastic water closet white. seat cover clossed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repairs wash basin, Vitreous China white flat back of size 550x400mm including 32mm bore Chromium plated waste fitting cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plugs and porcelain stopper but including brackets.

S&F in repairs chromium plated shower roses with or without swivel joints, any size incl fixing to steel pipe or union complete all as specified and directed.

S&F in repair 1mm thick stainless steel utensil rack of size 600x900mm and fixing to wall with screws complete all as specified and directed.

Dismantling wall and ceililing boards (fibre, pulp, insulation etc. ) or insulation boards/ slabs/ blankets, any thickness, including cover fiilets complete all as specified and directed.

S&F for 18mm thick WPC board minimum 600 Kgbm density grade 1 quality one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters/CB shutter fixed with screws, solvent cement/adhesive as per manufacturer instructions complete as per specifications and as directed by the Engineer-in-Charge.

Supply only autoclosing hydrolic (soft closing) chrome finish stainless steel hinge openable at 110 degree complete all as specified and directed.

Supply only 100mm long stainless steel (grade S-304) handle fancy type polished bright chrome finish complete all as specified and directed.

Taking down chouwkat with shutter (without taking off shutters from the frame) area not exc 1.5 Sqm each and removing from site complete all as specified and directed.

Taking down chouwkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description exc 1.0 sqm but not exc 2.0 Sqm each and removing from site complete all as specified.

S&F for hollow 125x60mm Pressed steel MS steel double / single rebated door frame including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, approved shape and size complete all as specified and directed.

S&F for hollow 105x60mm Pressed steel MS steel double / single rebated door frame including necessary fixing lugs, hinges, lock strike plate, etc, approved shape and size complete all as specified and directed.

M&L for 30 mm thick flush shutters with block board core & plywood face panels commercial type on both face complete all as specified and directed.

S&F for 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open repeated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24(a) and for door and fixed with chowkats,chemically pressure treated complete all as specified and directed.

M&L for factory made uPVC white color sliding window three track made of extruded profiles with wall, thickness of profiles not less than 2.3mm with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm) interlock (One vertical length in each shutters 45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2mm +/- 0.2 mm thick galvanised steel frame (30mm x 18mm) of 2 Nos, sliding sash (30mm x18mm) sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners hardware touch lock of zinc alloyed (white powder coated) steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and required accessories and 5.0 mm thick coloured glass pans and required necessary fittings complete all as specified and directed.

M&L for powder coated anodised aluminium grill wt n exc 5.60 Kg per sqm with all fittings & fixture and including stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and cover with aluminium frame around the edges of aluminiam grills complete all as specified & directed.

S&F for factory made solid PVC door frame of size 50 mm x 95 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S&F for factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick with partical board core (stile:), with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front Face & 2 mm Plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

M&L 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed complete all as specified and directed.

M&L for Extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed.

S&F for aluminium anodised barrel tower bolt extruded section 150 mm long complete all as specified and directed.

S&F for 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed.

S&F in repair Wall mixer with provision for overhead shower with 115 mm bend pipe on upper side,connecting legs and wall flanges complete all as specified and directed. Make : Jaquor cat part COP -273PM or equivalent as per make list.

S&F for in repairs corner glass self (with bracket) complete all as specified and directed.Make :Jaquor Cat part ACN-CHR-1173 or equivalent as per make list.

S&F in repairs for waste coupling 32mm size full thread with (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60ms) complete all as specified and directed.

S&F in repairs for bottle trap (with internal partition ) 32mm size with 300 mm & 190 mm long wall connection pipes & wall flanges complete all as specified and directed. Make :Jaquor Cat part ALD-CHR-769L300X190 or equivalent as per make list.

S&F in repairs for Maze overhead shower rose 200 mm round shape single flow (body & face plate SS with chrome finish) with rubit cleaning systemcomplete all as specified and directed. Make :Jaquor Cat part OHS-CHR-1613 or equivalent as per approved make list.

S&F in repair for cistern with frame complete s per manufacter instruction including all necessary accessories all as specified and directed. Make :Jaquor Cat part JCS-WHT-2400FS or equivalent as per approved make list.

S&F in repair for cistern with plate complete s per manufacter instruction including all necessary accessoriesall as specified and directed. Make :Jaquor Cat part JCP-CHR-352415 or equivalent as per approved make list.

S&F in repair for concealed body for 3-inlet single lever diverter with button assembly ,cartridge sleeve but w/o exposed parts complete all as specified and directed. Make :Jaquor Cat part ALD-CHR-193 or equivalent as per approved make list.

S&F in repair for single lever exposed parts kit of HI-FLOW diverter consisting of operating lever cartridge sleeve wall flange (with seals)button assembly sleeve & button (compatible with ALD-079N) complete all as specified and directed. Make :Jaquor Cat part OPP-CHR-15079NKPM or equivalent as per approved make list.

S&F for angular stop cock with wall flange complete all as specified and directed. Make :Jaquor Cat part OPP-CHR-15053PM or equivalent as per approved make list.

S&F for frameless swivel mirror complete all as specified and directed. Make :Jaquor Cat part ACN-CHR-1195N or equivalent as per approved make list.

S&F for towel ring complete all as specified and directed.Make :Jaquor Cat part ACN-CHR-1195N or equivalent as per approved make list.

S&F for two way bib cock with wall flange complete all as specified and directed. Make : Jaquor cat part KUP-CHR-35041PM or equivalent as per approved make list.

S&F for hand shower (health faucet) with 8mm dia 1.2 m long flexible tube and wall hook complete all as specified and directed. Make : Jaquor cat part ALD-CHR-573 or equivalent as per approved make list.

S&F for toilet paper holder with flap complete all as specified and directed. Make : Jaquor cat part AQN-CHR-7753 or equivalent as per approved make list.

Schedule of Credit (MINUS) Rs. 49650.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum

M/S SANJAY CONSTRUCTIONS (BID ID -3359471)

M/S APOORVA CONSTRUCTION (BID ID -3359452)

Channa Brothers and Co. (BID ID -3359886)

Raj Contruction (BID ID -3359390)

aiecro engineering works and consultants (BID ID -3367721)