WBPWD/EE-I/CKHED/eNIT13/25-26

Amount

S&F double door Horizontal 6-Way TPN MCB Distribution board with IP-42/43 protection, concealed in wall (Legrand: (607716 /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC)

S&F double-door (2+8) Way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall.(Legrand: (607712 /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC)

Supply & fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Legrand /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC)

63A FP MCB

32A DP MCB

6-32A SP MCB

Distn. wiring in 3X22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board complete with 2 no. “Ph & N” copper bar and 'L' sahped insulator chair with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish.

On board 5A

Average run: 10 Mtr.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC ( for new and old SPN DB and AC machine)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 2X25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required.

4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC (VTPN to TPN)

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

S&F Electronic Socket type fan regulator on existing switch board with backelight top cover after making housing for regulator knob by cutting backelight top cover including making necessary connections. [Make: Anchor]

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite top cover of 3mm thick and making necessary connections as required (Computer Board)

Supplying & fixing of 230V, Timer DB Fixed on Wall by flat iron/Angle frame or as per direction of EIC . The Box should comprising following accessories.. A).Double-door SPN-MCB Distribution Board with IP-42/43 protection 2+8 way make Legrand/L&T or as to GS. B). 1No. 250V ,50Hz,16 Amp Digital daily & weekly time switches(Make L&T-67DDT0/Eqv. legrand) C)1No 250V,40A DP-Contactor (Make- legrand model -DX³ contactors - 25 A 2 NO contactor 412544). D)1No. 250V,25A DP-MCB(Make-L&T/Eqv. legrand). E)The complete arrangement must be wiring by suitable size of PVC insulated Cu wire with suitable socket/lugs as per requirement & direction by EIC .

Supply and fixing 2-way MCB SS enclosure with IK-08 protection, [Legrand 507791] powder coated & S&F of 32A, 2 pole MCB in DIN channel, concealed in wall after cutting the wall & mending good the damages to the original finish or total establishment on flat iron frame in wall incl. inter-connection with suitable size of copper wire, necy. painting,& provision for earthing attachment etc. as required.

S&F EPC make 9" Sweep A.C Exhaust fan incl. making hole on wall with nuts & bolts of required with S&F of louver shutter.

S&F EPC make 12" Heavy Duty Sweep A.C Exhaust fan incl. making hole on wall with nuts & bolts of required with S&F of louver shutter.

Supply & Fixing 48" (1200mm) AC ceiling fan make: (Orient PSPO NEWBREEZE or SUMMERCOOL / equivalent of UHSA approved by EIC) complete with down rod, steel safety rope, canopy fork, blades with all other accessories etc. but without regulator.

S&F 16" 4-blades, 50W, 1320rpm AC cabin fan (make: EPC) on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) on 150mmX300mm best quality vernished wood or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

S & F of 240V, 36 W recess mounted decorative high efficiency LED clean room luminarie ( Crompton Greaves Cat. No. LCTLRNE-36-FO-TL or equivalent model of Philips/Bajaj/Wipro) with UV resistant & polycarbonate cover.

S&F double 4ft LED tube light fitting incl. 2 nos. 4ft LED tube lamp (essential LEDtube 1200mm 20W865T8 IND I 2100 lm), complete with all accessories suspended from ceiling/beem with L-clamp/ beem clamp. [Philips: TMC 501 P2XT LED 22W P3242) or Equivalent Havells]

S&F single 4ft LED tube light fitting incl. 4ft LED tube (essential LEDtube 1200mm 20W865T8 IND I 2100 lm), complete with all accessories suspended from ceiling/beem with L-clamp/ beem clamp. [Philips: TMC 501 P1XT LED 22W P3241) or Equivalent Havells]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Make:- Legrand/Anchor/ Havells/ABB), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Make:- Legrand/Anchor/ Havells/ North West) & necy. Connections.

Supply & delivery 3.0TR capacity concealed type Split Air Conditioner of rated cooling capacity of 36000 BTU/hr. with 1Nos. rotary compressor, 2nos. IDU of rated power supply-230V-1ph-50Hz. and 1no. ODU of rated power supply-220V-1ph-50Hz. Air-flow/per IDU:- 650CFM. ( Make: Ogeneral/Mitshubishi/Daikin).

Lifting,Shifting,Installation,Testing & Commissioning of IDU & ODU of following capacities concealed type Split Air Conditioners machines,after making hole in ceiling /wall on mending good the damages to the original finish as required & necy. scaffolding arrangement, labour cost etc.on both side(IDU & ODU Installation), and also connecting rod/rope from the ceiling must be attached into the machine by nuts,bolts etc. as per recurement with incl. Supply of required Refrigerant R-410A ,S&F of necy. fixing arrangement for indoor & Outdoor duly painted etc. as per direction of EIC if required.

Supply and fixing of AI powder coated continuous Grill (Make- Premier, Dynacraft/ EIC approved.)

Supply, Installation and commissioning of copper refrigerant piping for liquid and suction line complete with fittings, elbows, bends, supporting arrangement on walls.

a)Liquid Line (1/4" OD 0.6 mm thick).

b)Suction Line (5/8" OD 0.7 mm Thick) .

Supply & Fixing Pipe Insulation in liquid & suction line with 9mm nitrile rubber tube with Water Prof Heavy Duty AC Insulation Tape(Supreme/Accoflex/Armacell/EIC Approved)

a)Liquid Line (1/4" OD 0.6 mm thick). for 3 Tr. Concealed Split

b)Suction Line (5/8" OD 0.7 mm Thick) . for 3 Tr. Concealed Split

Supply fabrication and fixing specially for indoor unit should be supported with ms channel by 2 nos 1.5 mtr each of 40mm x 40mm x 6mm to distribute the total load from the mounted wall and by drilling holes for 4nos downrod & connecting the downrod into the channel by nuts,bolts etc. as per direction of EIC. (per AC machine)

Supplying & fixing of 2 nos 1.2 mtr long MS U-Channel (TATA/Jindal Make) of size (75 mm x 50 mm x 50mm x 6mm thick) for making platform for installation of outdoor unit on it after cutting holes (10 inch) into the wall & grouting the same with cement concrete (1:1 %1/2: 3) etc incl. mending as orginal. The fabrication of platform with horizontal MS angle of 25 mm x 25 mmx 6mm with supporting angle 50mm x50mm x 6mm on the outer edge and also in the middle portion of the platform and for transmitting the load, 2Nos (50 mm x50 mm x 6 mm) MS Angle inserted diagonally with the platform and exiting wall .The entire structure should be baricated with 25mmx 25mm x6mm MS angle and height will be 1M to ensure the safety of ODU maintenance. The platform will be 2Mx1.2M. incl. scaffolding arrangement, labour cost etc. The entire structure shuould be painted with One coat of red lead/Zinc chromate priming 1st coat of synthetic enamel paint over the primer then 2nd coat of synthetic enamel paint over the 1st coat(Structural design should be approved from EIC.)

Supply and laying Control copper Cable (PVC insulated & unshethed,un-armoured) from Condensing Unit to IDU control panel (Make: Havells/RR Kable /finolex/EIC Approved ) 04 core 2.5 sq mm communication cable.

Supply and laying of Drain Water piping work out of PVC/HDPE hard pipes of following sizes incl. fiting accessories bends, elbows, tees flanges, tapings, wall sleeves hangers, supports, anchors etc. as required.(Make : Supreme / Astral/ EIC approved). 25 mm dia.

Supply & Fixing Pipe Insulation for 25 MM dia drain pipe with 9mm nitrile rubber tube (Supreme/Accoflex/Armacell/EIC Approved)

Modification of window grill for accessing outdoor unit of Concealed Air conditioning Machines by cutting the grill and making Necessary arrangement by welding , grinding inch. S/F Hinge and Lock & key , as per direction of EIC.

Rate should be quoted incl. of all taxes and cess.

Defect Liability period : 1 year

OVERSEAS TRADING AND SUPPLIES CORPORATION (BID ID -6504870)

STAAR CONSTRUCTION (BID ID -6586141)