SPECIAL REPAIRS TO ROOF, LEAKAGE SEEPAGE TO WALLS/ CEILING OF THE BLDG NO P-2 AND SPECIAL REPAIR TO SQUASH COURT IN BLDG NO P-4 AT NAVY PARK UNDER GE HADDO, SRI VIJAYA PURAM

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings complete all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, fixed with self tapping screws all as specified and directed

M&L aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed

S&F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works like cooler stand conforming to Fe-290, Gde -E-165 complete all as specified and as directed

S&F mild steel roof trusses (framed), trrussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and as directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed

Excavation in post hole in hard/dense soil (or similar holes) each n. exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface complete all as specified and directed

M&L for cement concrete 1:3:6 type C2 (Using 40mm graded stone agrregate) as in foundation of posts, railing and similar work complete all as specified and directed

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed

M&L for applying two coat of synthetic enamel paint including preparation of old steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed

S&F for anodized aluminum snap grid frame work for false ceiling incl hangers 6mm dia, GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed

M&L for 4mm thick non asbestos fiber cement building design board of size 605x605mm fixed or laid to aluminum grid work with screws and including preparation of surface with two coat of oil bound distemper over a coat of chalk whiting primer complete all as specified and as directed

M&L for seamless designed gypsum board false ceiling 12mm thick including for any sunk or raised moulding with 25mm long self drilling/ tapping screws having philips head with joining compound and 48mm wide fiber tape to provide seam less finish and including GI frame work of seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flange of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm suspended from soffit at approx 900mm c/c with GI cleats and steel expansion fasteners with and incl ceiling section ( not exc 1.2m length) of 0.55mm thick having kurled web of 50mm an flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting across the intermediate channel at 457mm c/c incl hangers 6mm dia GI adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete and finally applying two coats of oil bound distember with roller finish over a coat of chalk whiting primer cmplete all as specified and directed

Cutting channels, grooves or rebates with or without reinforcement n exc 15cm girth, and trimming surface for embedding the APP membrane/Galvalume sheet into the wall /column surface

Taking down cement screed plaster on roof top, brick or stone walls etc, including raking out joints, hacking for keys, scrubbing down with water etc.

Demolition of cement concrete (Un reinforced) of any description as in padding concrete ( Other than ground floors) all as specified and as directed.

M & L for providing cement concrete type B0 1:2:4 of thickness 25 - 50mm (12.5mm grade stone aggregate) as in padding and benching & filleting all as specified and as directed

M & L for screed bed15mm thick on RCC roof slab with CM (1:4) mixed with water proofing compound @ 3% by weight of cement on fair faces of concrete surface finished even and smooth without using extra cement. (Note WPC shall be measured and paid seperately)

Supply only liquid water proofing compound

M&L for applying a coat of cold bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.2 Kg/Sqm over primer followed by APP modified polymeric membrane 3mm thick, minimum weight not less than 3 Kg/Sqm, reinforced with polyester non-woven fabric weight not less than 150 Gm/Sqm laid as per the manufacturer's instruction with side over lap of 100mm and end over lap of 150mm, tucked into the chases on vertical surfaces and painting over APP membrane sheet with aluminium paint @ 0.10 Kg/Sqm complete all as specified and directed

M&L for anodised aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

M&L for anodised aluminium door shutters, aluminium section weighing not less than 1.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, tower bolts, anodised aluminium snap beading screws etc complete all as specified. Note : Supply only floor spring, glass, SS friction hinges, particle board, wire gauze will be measured seperately

M&L for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified complete all as specified. Note : Supply only glass, particle board, wire gauze will be measured seperately

Supply only sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter not exc 0.5 Sqm in each pane

S&F Anodised aluminium grill of approved pattern cut to required size/shape and fixed with position with aluminium bedding & frame with & including F sections, fixed to aluminium windows/ventilators complete all as specified and directed.

Supply only sheet glass 5.5mm thick ordinary quality and glazing with aluminium glazing clip in aluminium door/window/ventilator shutter not exc 0.5 Sqm in each pane

Supply only 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work complete all as specified and as directed.

Supply only aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staples all as specified and directed

S&F 100mm size stainless steel butt hinges medium weight complete all as specified

S&F 150mm aluminium, anodised, barrel tower bolts of extruded section all as specified

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised all as specified

S&F 300 mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet sliding bolts of extruded sections and fixing bolts and sliding bolts of extruded section all as specified

Dismantling PVC water tanks exc 500 Ltr but n. exc 1000 Ltr capacity complete all as specified

S&F double layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed

Dismantling of 110mm dia cast iron/PVC pipes incl bends/branch pieces jointed in cement mortar and taking out if reqd.

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified.

Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store

Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store

S& F for 20mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcn including all fittings fixed complete to walls, ceiling or in floor etc

S& F for 25mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcn including all fittings fixed complete to walls, ceiling or in floor etc

S&F for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes.

M&L for 75mm thick PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth complete including filling the joints with mastic compound all as specified and directed

M&L for applying two coats of oil bound distemper over a coat of average 1mm thick wall care putty to make the surface smooth after complete removal of existing treatment complete all as specified and as directed

Cutting out existing cracks in concrete surfaces/masonry wall/slab forming grooves of 25mmx40mm size, cleaning the groove thoroughly with blower, applying primer coat of the mix of IPH CC or Hydroseal siliconate epoxy resin and hardner in equal proportion with spray gun suitable brush to form a film on the surface of groove, filling the groove with putty made by mixing IPH CC in equal proportion of make Harjas coating and polymers or hydroseal siliconate epoxy resin hardner and admixture in the proportion of 1:1:2 and finally applying the sealing coat of the same mix and in the manner primer coat is applied with following minimum coverage per running meter of groove :- Material : Priming coat putty filling seal coat, Resin 60gms 100gms 40gms, Hardner 60gms 100gms 40gms, Admixture 400gms complete all as specified and as directed .

M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls or concrete surface including mixing of liquid water proofing compound @ 200ml per 50 Kg cement bag, finished the surface fair and even without using extra cement complete all as specified. (Note: Water proofing compound shall be measured and paid separately)

M&L for preparing newly plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed

M&L for complete removal of existing treatment on plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed

M&L for applying two coats of oil bound distemper of approved tint over a coat of average 1mm thick wall care putty on ceiling after complete removal of existing treatment complete all as specified and directed

Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed

Taking down Chowkats exc 1.5 Sqm but n. exc 4 Sqm each with shutters (Without taking off shutters from the frame) complete all as specified and directed

S&F stainless steel tubing of any diameter of circular, square or rectangular in shape of grade AISI-304 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location complete all as specified and as directed.

Demolition of 150mm dia cast iron/PVC pipes incl bends/branch pieces jointed in cement mortar and taking out if reqd complete all as specified and as directed

S&F PVC (SWR) pipe 150mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and as directed

Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate) as in path laid in panels, finish the top surfaces even and smooth complete all as specified and directed

M & L PCC 1:2:4 type B 0 (using 12.5 mm graded stone aggregate) 25 mm thick as in levelling course, sub-floors and paving etc complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified.

M&L Chequered cement concrete tiles (glossy finish) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments in floors, over and Including 20mm thick screed bed in CM 1:6 etc all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed

Cutting down vegetation growths like plants/trees of girth n.exc. 60 cm from roof tops/ parapet walls, external walls of buildings, chajjas, wall junctions including removal of roots and taking out carefully possible quantity of concrete in roofs embedded in walls/slab surfaces and applying TUFALO chemical (herbal medicine) to arrest further growth and making good the disturbed surfaces with PCC (1:11/5:3) type B-1 or in cement mortar (1:2) upto 12 metre height complete all as specified and directed. Note: The unit rate quoted shall be deemed to include the cost of scaffolding/staging etc. as necessary to execute the work.

M&L for ATT to external wall below the concrete or masonary apron etc using chemical emulsion at the rate of 2.25 liters per linear metre including drilling holes and plugging holes etc in apron.

M&L for ATT to the soil under existing floors using emulsion at the rate of 1.00 ltr per hole 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors.

Labour only for dismantling of wooden flooring including base frames of any discription fixed in any position complete all as specified and directed

M&L for providing best quality 30mm thick 1st class teak wood boarding as in flooring 150mm write planned on side and edges tongue and grooved or rebated over 40 mm thick and 50mm wide plain fillet framework spaced at 60cm c/c both ways with two coats of chemical treatment to all wooden surface before fixing and finally polishing the top surface with melamine polish complete all as directed

M&L for sand filling in floors as in puffing to wooden flooring complete all as specified and as directed

S&F of polyethene film, black, micron laid in floors complete all as specified and as directed

M&F & providing 18mm thic superior quality chemicals presure treated, edge glued finger joined rubco huat rubber wood and the 8" width panel of board will be fixing after cutting of 12.7 mm tongued & grooved will be fixed over rubber wood frame work/rubber wood runner (beam) of size 50mm x18 mmfixed by secret nailing on the panel & the frame will be fixing and the wall be metalscrews, before fixing the rubwood panels on the frame all the surface area applying SH Adhesive (Make Fevicol) for enhanced fixed on the wall. There will be fixing designed rubwood beading on top and bottom termination of wood boarding and finished. After completing the carpentry works all the visible woods area will be sanding by No. 60 & 80 wood sanding paper, after that will be applying sheenlac make filler with mixing of NCD. Thinner (Sheenlac make), then pasting chock putty in the shabby/nailing area which will be sanding with No.120 sanding paper, afterthat will applying sealer of sheenlac make and walnut colour stainer, then cutting with No.320sand paper, after completing the above process will spray berger/shenlac make then cutting with No.400 sanding paper . Finally will applying siliconmake: waxpol with soft Banyan cloth for better shining finishing complete all as specified and as directed

M&L for 10mm thick plaster in CM 1:6 on fair face of concrete surface or brick walls finished even and smooth without using extra cement complete all as specified

M&L for preparation of newly plastered surface of wall and applying two coats of Synthetic enamel paint over a coat of average 1mm thick wall care putty to make the surface smooth complete all as specified and directed

M&L for applying two coats of Synthetic enamel paint over a coat of average 1mm thick wall care putty to make the surface smooth after complete removal of existing treatment complete all as specified and directed

S & F in repairs aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polythelene core with PVDF coating of 30.0 micron with expansion fastener, having panels not exc 1200 x 1200mm with necessary silicon fitting, in approved pattern as in column, beam, wall etc. complete all as specified and as directed. Note:- Necessary MS scaffolding required for work shall be deemed to be included in the quoted rate.

M&L for 16-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite complete all as specified.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed by Engr-in-Charge

S&F 12 mm thick toughened glass for partition with necessary clams required to fix the glass in ground and wall having all the edges polished and chamfered complete all as specified and ditrected

S&F 12 mm thick toughened glass door fixing with partition glass by all necessary hinges and clams having all the edges polished and chamfered complete all as specified and ditrected

S&F door closer hydraulically regulated aluminium (die cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified

M&L for coloured Glazed ceramic tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:3 complete all as specified and directed

M&L for light shade vitrified ceramic tiles minimum 8mm thick (square/ rectangular) polished area of each tiles n. exc 0.36 Sqm (600x600mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed

S&F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stils & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F in repairs stainless steel grating cover 100mm dia fixed with white cement all as specified and directed.

S&F for fixed in repairs wash hand basin vitreous china white (flat back) of size 550x400mm including 15 mm dia pillar cock , CI bracket 15mm dia polythene connection 450mm long , 32mm dia waste coupling and 32mm dia PVC waste pipe 450mm long etc. complete all as specified, including taking down the existing wash hand basin all as specified and directed.

S & F in repairs vitreous China bowl urinal flat back, of size 465x355x265 mm white (minimum) with grating and union for discharge pipe including providing and fixing plugs, buttiing urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement with and including 32mm dia waste pipe in low density polyethylene (LDPE) of pressure rating 6 kgf/sqcm of 1.0 metre length, PVC connections 15mm size with PTMT nuts of length 450mm, concussive push button taps 15mm dia or bore, cast copper alloy, screwed for iron pipe, urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms), fixed complete all as specified and as directed.

S&F in repairs of 5 mm thick looking mirror with rubber wood frame of size 50mm x 18mm thick,close back with 4mm thick 707 grade and fixing the frame with reruired GI clamps and polishing the top surface with melamine polish complete all as specified and directed

S&F in repairs of 5mm thick looking mirror with all edge polishing and fixing the frame with required glass clams without any frame work complete all as specified and directed

Taking down carefully copper/aluminium point wiring for light, fan, socket or power point etc complete with all fittings and fixtures such as switch piano, ceiling rose switch, socket, Pendents etc including making good surface of wall, ceiling etc complete all as specified.

Taking down fuse Unit/DBs, 415 Volt/230 Volt incl MCCB/MCB

Taking down old aluminium sub main wiring of any size.

Taking down existing light fittngs any type and any capacity.

M&L for Point wiring two single core 1.5 sqmm size PVC insulated, unsheathed FRLS multistranded copper conductor cable and one single core 1.5 sqmm size green colour PVC insulated FRLS multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including PVC casing and caping not less than 25 mm width with all fittings, surface on wall/roof /floor including including sunk pressed steel terminal boxes flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-

Description same as per item Ser No 97 One light/fan point controlled by one switch 5 Amps one way complete all as specified and directed.

Description same as per item Sl No 97 above but for two light point controlled by one switch 5 Amps one way complete all as specified and directed.

Description same as per item sl No 97 above but, point wiring for 3 pin switch socket outlet , 5 Amps on independent board complete all as specified and directed.

Description same as per item Sl No 97 above but, point wiring for 3 pin switch socket outlet , 5 Amps on same board complete all as specified and directed.

Description same as per item Sl No 97 above but, one light point controlled by two 2-way switches complete all as specified and directed.

Description same as per Srl item No 97 above but point wiring with two single core 4.0 sqmm size cables and one 4.0 sqmm green colour cable as earth continuity conductor for one 6 pin 16 Amps socket out let on independent board.

Supply & fixing for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed.

Supply & fixing for switch modular type, 16 Amps 1 module, 230 volts AC circuit complete all as specified and directed.

Supply & fixing for socket outlet modular type 1 way 6 Amps, 3 pin, flush type 230 volts AC circuit complete all as specified and directed.

Supply & fixing for socket outlet, modular type 16 A, 3 pin, flush type controlled by one switch 230 volts AC circuit complete all as specified and directed.

Supply & fixing modular bell push 6 Amp one module 230 V AC .

S & F stepped type modular fan regulator, 2 modular type complete all as specified and directed.

Taking down carefully fan of any type/make, size from its location, dismantling complete, examine complete parts thoroughly, oiling, greasing all parts and complete overhauling of fan including replacement of small parts such as split pin, nut bolt, screws and assembling back the fan, make fully functional, re-fixing the fan to its position including replacing and providing of twin core copper wire 23/0.0076 from fan to ceiling rose and painting the fan with same colour of fan complete all as directed.

Supplying, fixing and testing Tube light fittings aluminium housing, Diffuser slim Integrated design LED 21 watts 4 feet, IP-20 including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Philips Cat Part No : BN021C LED22S or equivalent to CG/ Havells/ Luker

Supply and fixing and testing Mirror light fitting of cap 20 watt with all fixing arrangements all as specified and directed. Make-Havells cat no LHLDESAARANC020 or equivalent to Philips/ CG

S & F Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base. Make- Havells model No LHFOAJE1TZ1I060

S & F of LED slim panel lighting fixture of 12 Watt recess mounted 220V, 50Hz with finished in premium white powder coating ,environmental friendly energy efficient fitting recess mounted round/square in shape (Warm white/ white colour as per requirement of site complete) of light as required at site) complete all as specified and directed. Make - Luker Cat Part No : LNPR12 or equivalent make in CG/ Philips/ Havells. NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting .

Supply & fixing LED bed side lamp of capacity 3 watts with lED bulb (white/yellow colour of light as required at site) complete all as specified and directed. Make : Philips Model Moden No : 48042 or euivalent to Havells/CG

Taking down carefully old unserviceable water heater of capacity 25 liters and refixing the same with painting of two court of synthitic enamaled paint all as specified and directerd by Engineer-in-charge.

M&L for Sub main wiring complete with two runs (1P+1N) of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 4.0 Sqm copper conductor, One run of 4.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping shall be measured as one unit length.

All as per item No 111 above but 2 runs of 6.0 sqmm. Note (for item No 111 & 112) : 3 length of cable and one length casing & caping shall be measured and paid for one length .

S & F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 12 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete.

Supplying & fixing MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed .

S & F MCB SP 06-32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed . Note for item No 114 & 115 :- Termination of all wiring in to MCBs/ MCCBs/DBs shall be through copper lugs/thimbles of adequate capacity.

M & L for refixing the old serviceable light fittings of any cap/type/make at its existing location after completion of Civ work (retrived from item No-96) all as directed by Engr in Charge.

M & L point wiring complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLS PVC insulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed/ surface conduit of size not less than 20mm dia, with all necessary fittings, concealed in walls /roof/ floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-

All as per item No 117 above but for One light/fan point controlled by one modular switch 5 Amps one way.

All as per item Sl No 117 above but for two light point controlled by one switch 5 Amps one way complete all as specified and directed.

All as per item No 117 above but for one modular 3 pin 5 Amp socket out let on independent board.

All as per item No 117 above but for one modular 3 pin 5 Amps switch socket on same Board.

All as per item No.117 above but point wiring with 4.0 sqmm PVC FRLS insulated multistranded copper conductor suitable for one 3 pin 16 Amps socket out let and one run of 4.0 sqmm cable for earth in green colour on independent board.

Supply & fix modular AC box with 20A DP MCB 'C' type, metal enclosure unbreakable heavy duty with ISI plug top, 240 volts AC supply for air conditioner, flush mounting in the wall complete all as specified and directed. Make:- Anchor (Roma) Model No. 98492 or equivalent in crabtree / Legrand.

S & F Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete.

S & F in replacement of 25 watts LED building security light fittings ASTRA NEO street lights are made up of pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection. Efficacy ≥ 110LPW including necessary fixing arrangements as per site requirements all as specified and directed by Engr In charge. Make : CG Cart Part No: LSTS-25-CDL-M or equivalent to Philips /Havells

S & F and testing LED recessed mounted 2' x 2' LED luminarie with with high transmitive diffuser of cap 42 watt, with longer life and less maintenance including all accessories and fixing arrangements of the light fitting complete all as specified and directed. Make: Philips, model no-RC380B LED42S-6500 G6 L60W60 PSU OD S1 or equivalent to CG/ Havells/ Luker

Supply and fixing of Decorative ultra slim linear LED lighting fixture of 15 Watt recess mounted 220V , 50Hz with Aluminium housing ,environmental friendly energy efficient fitting recess mounted round/square in shape (Warm white/ white colour as per requirement of site complete) complete all as specified and directed. Make - Philips Cat Part No : Dura Slim or equivalent make in CG/Havells /Luker. NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting.

Supply and fixing new GI brackets of GI pipe light grade of size 25 mm dia including nuts, bolts and washers for building secufity light all as specified and directed

Taking down carefully Exhaust fan of any make, size from its location, dismantling complete, examine complete parts thoroughly, oiling, greasing all parts and complete overhauling of fan including replacement of small parts such as split pin, nut bolt, screws and assembling back the fan, make fully functional, re-fixing the fan to its position including replacing and providing of twin core copper wire 23/0.0076 from fan to ceiling rose and painting the fan with same colour of fan complete all as directed.

S & F Sub main wiring with PVC insulated FRLS cable 2 run of suitable size single core 4.0 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red /Yellow /Blue, Neutral- black and earth- green in and incl rigid PVC concealed/ surface conduit (ISI marked) incl all specials/ accessories etc and provision of PVC insulated FRLS copper conductor single core 4.0 sq mm for earth continuity all as directed.

Description all as per item No 125 above, but , 6.0 sqmm 2 core. Note for item No 125 & 126 : 3 length of cable and one length PVC Conduit shall be measured and paid for one length.

S & F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 8 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete.

Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. RCC cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion. NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. 2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.

NAWAZ CONSTRUCTIONS (BID ID -3317759)

Sree Tirumala Enterprises (BID ID -3312597)

M/s Prem Enterprise (BID ID -3317359)

JD Construction (BID ID -3317554)

ABR Construction (BID ID -3315249)

CHANDER SEKER ENTERPRISE (BID ID -3315903)

SKV Engineering (BID ID -3315611)

M/s K Moorthi (BID ID -3316782)

LOOK UP ENTERPRISES (BID ID -3317768)