SPECIAL REPAIR TO SHOPPING COPLEX BLDG NO P 300 AT AF STATION MOHAHMADPUR UNDER GE AF GURGAON

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as specified.

M&L for Vitrified ceramic light shade tiles, 10 mm thick (square/ rectangular) polished ,area of each tile not exc. 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified.

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified.

M&L for Non-skid ceramic tiles,coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified.

M&L for Baroda green marble stone slab shall be 15 to 19 mm thick laid over 15 mm thick scree bed in cement mortor 1:6 including pointing in white cement 1:2 marble dust shall be provided. The stone shall be meachine cut, uniform in colour , hard sound, dense and homogenious in texture , free from cracks, decay weathering flaws length and width og each peace not less than 1.00mtr all as specified.m thick screed bed or bedding layer of cement mortar 1:6 complete all as specified.

M&L for 25mm th levelling course in Cement concrete 1:2:4 type B-0, (12.5 mm graded aggregate) complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for Glazed ceramic tiles, colour tile, in vertical surfaces, 450 X350 X 7 mm thick over 10 mm thick cement plaster in cement mortar 1:6 as backing of wall tiles etc., set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified.

M&L for chequered cement concrete tiles 30cmx30cm x 25mm thick, With grey cement and pigments, set, jointed and pointed in neat cement slurry ,over and including 20 mm thick screed bed or bedding layer of cement mortar 1:6, over new or existing sub-base in floors complete all as specified.

M & L for Precast coloured ceramic pavement tiles 300x300x7-8 mm thick(Eurocon or Duracrete or Ultra make) laid in floorings as per manufacturer size over a screed bed of CM 1:6, 20 mm thick all as specified.

M&L for 50 mm thick Cement concrete 1:3:6 type C1, (20 mm graded aggregate), as in plinth protection, finishing cement concrete surface even and fair without using extra cement complete all as specified.

M&L for taking down cement plaster, any description, including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified.

M&L for 15mm thick rendering in cement mortar (1:6) on brick or concrete surface of any description, finished the surface even and smooth without using extra cement complete all as specified.

M&L for 15mm thick rendering on fair faces of brick work, concrete surfaces in cement mortar 1:4 mixed with Liquid WPC, finished even and fair, complete all as specified. (Note : Liqiud WPC shall be measured and paid separately)

Supply only liquid water proofing compound, complete all as specified.

M&L for Preparation of new plastered surface and applying two coat of oil bound distemper with hand roller over primer to receive distemper over 1-2mm th wall care putty complete all as specified.

M&L for complete removal of existing treatment of wall surface and applying two coat of oil bound distemper with hand roller over primer to receive distemper over 1-2mm th wall care putty complete all as specified.

M&L for complete removal of existing treatment on walls including washing down, rubbing down and applying Two or more coats of 100% Premium exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. as specified.

M&L for Preparation of new plastered surface on walls and applying Two or more coats of 100% Premium exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. as specified

M&L for preparation of new wall surface, and applying two coat of white wash complete all as specified.

M&L for preparation of old wall surface, and applying one coat of white wash complete all as specified.

M&L for preparation of old ceiling surface, and applying two coat of white wash complete all as specified.

M&L for old preparation of wall surface, and applying one coat of texture paint over a coat over one coat of primer and 1 mm thick wall care putty complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

S&F Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates etc. conforming to Fe-410-W(Gde E-250) quality B complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. .Fe-410- W(Gde E-250)quality-B complete all as specified and as directed.

S&F MS Machine made screw bolts with hexagonal or square head at one end and screwed the other each screwed end to be fitted with washers and one hexagonal nut exc 16 and not exc 20 cm long complete all as specified and as directed.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,with riveted, bolted or welded attachment Fe-410-W(Gde E-250) quality B complete all as specified and as directed.

M &L for Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bar, barred iron doors ladders; framed balusters walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as complete all as specified and as directed.

Dismantling of wall and ceiling boards( fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets complete all as specified.

M&L for applying Plaster of Paris (POP) false ceiling consisting of frame work made with 50 mm square MS tube of 18 Gauge thickness as main runner at 600 mm c/c both ways suspended/supported with MS flats 25x4 mm from existing RCC slab including providing and fixing expanded metal of size 5.25mmx1.25 mm thickness welded to main runner and applying POP (Plaster of Paris) to the expanded metal of thickness not less than 10 mm finished smooth to line and level and design as approved by Engr-in-Charge with necessary support scaffolding etc as required and including applying a coat of red oxide zinc chromate primer over the MS frame work and also including dismantling of old existing false ceiling of any type complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any guage, thickness from roof covering complete all as specified.

S&F for Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified.

Taking down and removing Chowkats or frames not exc. 1.5 sq.m with shutter (without taking off shutters from the frames) complete all as specified.

Taking down and removing Chowkats or frames exc 1.5 sq. m but not exc 4 sq. m with shutter (without taking off shutters from the frames) complete all as specified.

Taking down shutter exc 1.0 sqm but not exc. 2.0 sq.m each complete all as specified.

S&F 2nd class hard wood factory made 35 mm thick plain, framed, panelled shutters(any no of panels) with panels of timber flat on both sides (feather edge) or of veneered partical boaed medium density, wood pertical board with commercial face veneers; supply and fix two chowkats complete all as specified.

S&F 2nd class hard wood factory made 30 mm thick Glazed and sketon shutters, open rebeated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SS Part-I, section 8, clause 8.24 (a) supplied and fited to chowkat complete all as specified.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC printed sheet & edges will be painted to match with printed sheet ,reinforced with M.S. Square tube, in opening as per specification & drawing complete all as specified.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading in the frame at site as per specification & drawing complete all as specified.

Dismantling of boarding fix with screws as in kitchen cabnit/ cup board/ partition/ shutteretc and simlar work complete all as specified and as directed.

S&F Plain (White) PVC Board Scratch and strain free (weight not less 9 Kg/Sqm) in Door, Shelves for Cup Boards or Kitchen Cabinets, both side laminated, 18/19mm thick as required, jointed by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws, and Fixed-in-repairs,complete all as specified and as directed.

S&F Stainless Steel Silver chrome Door Handle 100mm long, suitable for fixing of Brass screws inside of the board etc, and Fixed-in-repairs,complete all as specified and as directed.

S&F Magnetic Door Catcher medium grade to hold approx 1000 mm opening cabinet door and Fixed-in-repairs complete all as specified and directed

S&F Stainless steel frog hinges suitable for kitchen cupboards 22 mm PVC Celuka Board etc for smooth movement, and Fixed-in-repairs,complete all as specified and as directed.

S&F Aluminum anodized powder coated frame fo doors, windows, ventilators powder coating (Min thickness of powde coating 50 microne) with one or more rebated including jointing cleats for fixing etc complete all as specified.

S&F Aluminum anodized powder coated door shuttes, aluminum section weighing 0.55 Kg/m including necessary, jointing cleats, glazing clip, rubber neoprene packing handles two nos in each door, hinges three nos in each leaf, anodized snap beading screws etc powder coating of any colour (Thickness of powder coating not less than 50 micron) complete all as specified and as directed.

S&F Aluminum anodized powder window and ventilator shutters side hung type without sash , aluminum sections weighinh 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing anodized aluminum snap beading screws anodized aluminum fittings such as peg stays 150mm long (one no) hinges type B-21 100mm long (2 no) suitable handle (01 no) for each leaf ,powder coating of any colour (Thickness of powder coating not less than 50 micron) complete all as specified and as directed.

S&F Mortice brass lock vertical type size 100mm with 4 levers complete all as directed.

S&F floor spring double action hydraulically regulated made up of min 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty ISI Marked fixed in position, complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over one coat of pink primer including preparation on wood or wood based surfaces of any description on new surfaces exc. 10 cm width or grith complete all as specified.

M&L for one coats of synthetic enamel paint including preparation on wood or wood based surfaces of any description on old surfaces exc. 10 cm width or grith complete all as specified.

M&L for one coats of synthetic enamel paint including preparation on steel or steel based surfaces of any description on old surfaces exc. 10 cm width or grith complete all as specified.

M&L for Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified

S&F 100 mm Butt hinges, Medium weight, cold rolled mild steel, and fixed complete all as specified.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified.

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified .

Demolition Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M& L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in set in CM 1:4 complete all as specified.

Demolition of cement concrete (reinforced) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified.

M&L for reinforced cement concrete (Nominal Mix) 1:2:4 Type B1 (20 mm graded aggregate) as in lintel over 1.5 M span, Beam etc complete all as specified.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary use and waste formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, including flush pipe of polyethylene of low or high density or PVC 32 mm dia., plastic water closet seat closed pattern with cover and hinging device and trap with connection in repairs complete all as specified.

S&F Chromium plated jet for EWC complete all as specified.

S&F 10 Ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or lever, if any in repairs complete all as specified.

S&F Vitreous china wash basin, white, flat back, size 550 X 400 mm including fixing with brackets exclusive of fixing of supply and waste pipe and 32 mm chromium plate waste fitting with long screwed shanks and fly-nuts complete all as specified.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm in repairs complete all as specified.

S & F in repairs 15mm bore Bib taps, fancy type chromium plated cast copper alloy with crutch or butterly handle, screwed down, screwed with cup for iron pipe or for brass ferrule and fixed complete all as specified and directed

S & F in repairs 15mm bore Stop Valve/ angle valve fancy type chromium plated , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends with cup for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs 15mm bore Pillar taps central hole Basin mixer with regular spout without popup waste system with 450 mm long braided hosedd 20 mm carttridge size fancy type, cast copper alloy, chromium plated, complete all as specified and directed.

S&F Aluminium anodised tubular towel rail, 20 mm dia., D type, 60 cm long between flanges in repairs complete all as specified.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

S&F Soap dish, cast copper alloy, chromium plated with screws complete all as specified.

S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified.

Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

S&F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.

Taking up or down steel tubing 20 mm bore, and connections, including cleaning for re-fixing or removal to store complete all as specified.

S&F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.

S&F in repair 1000 Ltrs capacity, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I, including ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20 mm bore steel tube and dismantling existing water tank and removing complete all in repair as specified.

S &F 12mm thick toughened glass pane fixed to opening with stainless steel cleats as directed by Engr-In-Charge

M&L for 20mm thick Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of ranite stone including grinding and polishing complete incl 20mm thick screed bed in CM 1:6 complete all as specified and dircted by Engr-in-Charge.

M&L for Surface Preparation incl removal of existing mbrain and Surface to be free from APP Membrain , frost, surface laitance and contamination and free from loose aggregate, incl taking down cement plaster and appliying 15 mm thick cement plaster with CM 1:4 smooth with adding 200ml water profing compound at 50 kg of cement finish the surface clean with water complete all as directed by Engr-in-Charge.

M&L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) with 15 cm longitudinal & horizontal over lapping and joints finally pasted with thermo- fused withblow lamp laid over a coat bitumen @ 1.20 Kg /Sqm over bituminous primer 0.30 ltr per sqm as per APP manufacturer instructions etc complete all as specified and as directed. Note :-item includes repair in patches complete all as specified and directed by Engr-in-Charge.

M&L for two coat of aluminium paint over top surface of water proofing membrane etc complete all as specified and as directed

S& F in repair stain less steel decorative cutrain rod of 25 mm bore inluding 2 nos steel finale and bracket 02 nos etc and fixed to wall with plastic rowl plug and steel screw complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plaincolour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications including dismantling of existing wall paneling complete all as specifid and as directed.

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all asspecified and as directed.

Desigining and providing and fixing Aluminium Composite Clading 3mm thick with FR grade mineral core sandwiched between two aluminium sheets (each 0.5mm thcik) of over RCC/Brick surfaces either segmental/ straight in plan wherever specified with extruded aluminium U section, angle, cleats, weather sealants, backer rods of required size stailess steel screws,rivets,brackets,drilling and fixing the cladding to either masonary or reinforced cement concrete as the case may be manufacturer's specifications, complete the work in all necessary accessories. At all soffits aluminium cladding shall be bend 90 degree and joints at corner or edges will not be acceptable. On horizontzl surfaces, the size of sheet should be maximum available of size complete all as per manufacturer's specification and as directed by Engr-In-Charge.

Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody and making good disturbed surfaces of walls, floors etc all as specified as directed.

Taking down carefully by unscrewing from the boards/outlets boxes fittings and fixtures such as switches, sockets ceiling, rose, lamp holders, tube light fittings, regulators etc and making good of disturbed surfaces complete all as specified.

Taking down of existing old unserviceable submain wiring complete all as specified and as directed.

Taking down of existing old unserviceable distribution board including MCB/MCCB complete all as specified and as directed.

Material & Labour for concealed point wiring with single core PVC insulated and unsheathed 1100 volts grade cable with multistranded copper conductor of size 1.5 Sqmm nominal area drawn through & including non metallic rigid PVC conduit (circular/flat pvc conduit), medium duty not less than 20 mm dia concealed in wall/fixed on wall/ceiling with GI saddles , GI screws , rawl plugs with all fittings including tees , junction boxes & provision for modular box and modular cover of suitable size for mounting modular switches , sockets & regulators & drawing through continuous earth wire of PVC insulated unsheathed 1100 volts grade cable with copper conductor solid conductor of size 1.5 sqmm complete all as specified & directed by Engineer -In-Charge. Note: Cost for cutting chases and making good to match the existing surface shall be deemed to be included in the quoted rate.

For one light point controlled by one single pole switch.

For one fan/exhaust/wall mounted point controlled by one single pole switch.

For one 3 pin sockets outlet 5 Amps on the same board with other switches with cable of size 1.5 sqmm

For 3 pin socket outlet 5Amps independent with cable 1.5 Sqmm size

For one 3 pin sockets outlet 15 Amps idependent with cables 2.5sqmm size

Supply and fix in replacement of switch piano, flush type single pole, one way, 5 Amps, 240 volts all as specified and directed at site.

Supply and fixing in replacement of socket outlet, 3 pin 5 Amps all as specified and directed at site.

Supply and fix in replacement of switch piano, flush type single pole, one way, 15 Amps, 240 volts all as specified and directed at site.

S & F Socket outlet piano type 2 in 1, 3 pin, 5 and 15 amp flush type type universal complete all as specified and directed by Engr-in-Charge.

Supply & Fixing of Ceiling Rose, 3 phase polycarbonate isolated body complete all as specified & directed by Engineer - In-Charge.

S&F steped type electronic fan regulator flush type on the existing phenolic laminatedsheet etc complete all as specified & directed by Engineer - In-Charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed by Engineer - In-Charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified & directed by Engineer - In-Charge.

S&F submain wiring with unsheathed multi-stranded FR Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 4 Sqmm single core HR Grade and one run of 2.5 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB/ AC plug points complete all as specified and as directed. Note :- (a) Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete all as specified & directed by Engineer - In-Charge. (b) Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

All as per item No 111 above but 2x6.0 sq. mm +1x4.0 sq. mm earth wire complete all as specified and as directed.

S&F submain wiring with unsheathed multi-stranded FR Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 40 mm dia with conduit accessories and concealed in wall/surface of ceiling for four runs of 6 Sqmm single core HR Grade and two run of 4 Sqmm PVC insulated copper conductor for earth continuity wire between main VTPN to Sub main 4 way TPN DB complete all as specified and as directed. Note: Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

Supply and fixing Rigid non-metallic 25 Dia in mm PVC conduit exclusive of boxes (junction/terminal) but inclusive all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.

All as per item No 114 above but Rigid non-metallic 20 Dia in mm PVC conduit complete all as specified and as directed.

All as per item No 114 above but Rigid non-metallic 40 Dia in mm PVC conduit complete all as specified and as directed.

S&F double door VTPN Distribution Board double door 4 Way IP43 with provision for 100 A MCCB as incomer & WiNtrip SP/TP MCB's as outgoing as per IEC 61439-3 with 250A copper busbar for each phase with fully insulated busbar & shrouded Neutral bars complete all as specified and directed. Make: C&S Cat No:CSDBMCCB100DD04IP43 or equivalent make of Havell's/ L&T/Legrand

S&F MCCB 3 Pole .415 V. fixed type 100 Amps with breaking capacity 16 KA suitable for above item double door VTPN DB 4way as a incommer complete all as specified and directed.

S&F sheet metal enclosure double door suitable for distribution boards when MCBs to be used having 200Amp rated bus bar 4 ways Triple pole and neutral 415V complete all as specified and as directed.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) TPN 32 AMP of 4 poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified.

S&F sheet metal enclosure double door suitable for distribution boards when MCBs to be used having 200Amp rated bus bar 4ways single pole and neutral 240 V complete all as specified and as directed.

All as per item No 121 above but SPN 32 A MCB complete all as specified and as directed .

S&F in repalcement of MCB SP 6-32 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed by Engineer -in -charge .

Supply , Laying , testing and commissioning in replacement of XLPE insulated and PVC Sheathed , galvanized steel strip or wire armoured , heavy duty electric cable with multi stranded aluminium conductor , 1100 volts grade of size 35 sqmm 4 core complete all as specified & directed by Engineer - In - Charge.

Excavation in treanches in soft loose /soil not exc 1.5m wide and not exc 1.5m deep and getting out for taking out and laying cables foudation etc. Brick PCC cables protection cover shall be retrieved and kept in safe costody for reuse).

Returning filling in including spreading leveling waterning and well remmaning in layers not exc 25cm thick all as directed .

Removing of surplus spoil to a distnce not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point.

M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed. Note :- Thickness of sand cushioning shall be measured after punning.

M&L for brick protection with sub class 'B' Designation 75 old bricks laid dry flat 23cm in width over sand cushioning in trenches as perpendicular to the direction of underground cable complete all as specified and as directed.

S&F in repair GI pipe light grade 50mm bore in trenches/wall/poles for protection of cable complete all as specified and as directed.

M&L for carrying out horizontal boring below roads/PCC hard standing/Drain suitable Up to 50 mm dia GI pipe as per site requirement for inserting GI pipe of 50 mm size with a depth upto 1.5m & length of road upto 12m complete all as specified and as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6.0mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less that 1.5 meters below normal ground level connected to galvanized iron earth lead wire 4.0 mm dia by means of bolts nuts and washers of galvanized iron including excavation and earth work and disposal of surplus soil including 15 mm GI tubing light grade and necessary fittings for protection of GI wire upto 7.5 mtr including laying of charcoal , dust and common slat , PCC 1:2: 4 type B 1 using 20 mm graded aggregate with earth pit with 40 X 40 X 6.0 mm MS angle iron frame RCC cover 40 mm thick (1:2: 4) type C1 using 20 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75 mm C/C both way with plastering 15 mm thick CM ( 1: 6) internally and up to 150 mm below ground level externally . PGI funel with wire mesh ,20 mm dia medium grade GI pipe for watering purpose complete all as shown on electrical plate No : 03 of SSR part - I 2009 and connected to earth test point including testing completed all specified and directed.

Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed.