Construction of Standard Gate Complex for 400 33 KV Grid Sub - Station at Mendhasala

Earthwork in excavation in hard soil on foundation trenches including dressing and leveling the bed up to the required depth and depositing the excavated materials with all leads and lifts T&P shoring and shuttering , dewatering if required etc complete including cost,conveyance,taxes of all labour with T&P required etc complete as per the direction of the Engineer in charge.

Supplying all labour with T&P for filling foundation and plinth with sand including watering, ramming etc comolete including cost , conveyance , royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete (measurement will be taken on finished & complete section only) as per the direction of the Engineer in charge.

Supplying all labour with T&P for filling foundation and plinth with excavated material including watering, ramming etc comolete including cost , conveyance , royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete (measurement will be taken on finished & complete section only) as per the direction of the Engineer in charge.

Cement concrete with (1:3:6) in foundation and floors using 40 mm ( 1 ½ ‘’) size black hard crusher broken granite stone metal of approved quality from approved quarry including lower laying concrete watering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge.

RCC (1:1.5:3) M20 grade in RCC column base and column upto plinth having a minimum compressive strength 20N/mm2 ( in work test of 200 Kg per CM2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S.516 ) using 12 mm to 20 mm size hard black crusher broken granite stone chips ( 20 mm size not to exceed 25% ) including hoisting, lowering, laying compacting concrete by using concrete mixer vibrators and similar equipments and tools and plants with watering and curing for 28 days including centering, shuttering and finishing the exposed surfaces smooth providing grooves or beads where necessary including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects but excluding the cost of M.S. rods or tor steel and binding wires and labour charges for cutting, bending, binding and tying the grills etc complete as per the direction of the Engineer - in – charge.

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.

RCC (1:1.5:3) M20 grade in column and beam having a minimum compressive strength 20 N/mm2 ( in work test of 200 Kg per CM2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S.516 ) using 12 mm to 20 mm size hard black crusher broken granite stone chips ( 20 mm size not to exceed 25% ) including hoisting, lowering, laying compacting concrete by using concrete mixer vibrators and similar equipments and tools and plants with watering and curing for 28 days including centering, shuttering and finishing the exposed surfaces smooth providing grooves or beads where necessary including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects but excluding the cost of M.S. rods or tor steel and binding wires and labour charges for cutting, bending, binding and tying the grills etc complete as per the direction of the Engineer - in – charge.

RCC (1:1.5:3) M20 grade in lintel having a minimum compressive strength 20 N/mm2 (in work test of 200 Kg per CM2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S.516 using 12 mm to 20 mm size hard black crusher broken granite stone chips where 20 mm size not to exceed 25% ) including hoisting, lowering, laying compacting concrete by using concrete mixer vibrators and similar equipments and tools and plants with watering and curing for 28 days including centering, shuttering and finishing the exposed surfaces smooth providing grooves or beads where necessary including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects but excluding the cost of M.S. rods or tor steel and binding wires and labour charges for cutting, bending, binding and tying the grills etc complete as per the direction of the Engineer - in – charge.

RCC (1:1.5:3) M20 grade in Roof slab having a minimum compressive strength 20 N/mm2 ( in work test of 200 Kg per CM2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S.516 using 12 mm to 20 mm size hard black crusher broken granite stone chips (20 mm size not to exceed 25% ) including hoisting, lowering, laying compacting concrete by using concrete mixer vibrators and similar equipments and tools and plants with watering and curing for 28 days including centering, shuttering and finishing the exposed surfaces smooth providing grooves or beads where necessary including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects but excluding the cost of M.S. rods or tor steel and binding wires and labour charges for cutting, bending, binding and tying the grills etc complete as per the direction of the Engineer - in - charge.

First class brick masonry in cement mortar ( 1:6 ) in F & P using fly ash bricks of size (25 X 12 X 8 ) cm with dimensional tolerance (+or-) 8% and crushing strength not less than 75Kg/cm2 after immersing the bricks for six hours in water before use, including splays cutting,circular molding& corbeling,chamfering & similar such type of works,watering and curing etc complete including cost, conveyance, royalties and taxes of all materials & cost, conveyance, taxes of all labour with T&P required for the work etc. complete in all respect as per the direction of Engineer-in-charge.

First class brick masonry in cement mortar ( 1:6 ) in SS using fly ash bricks of size (25 X 12 X 8 ) cm with dimensional tolerance (+or-) 8% and crushing strength not less than 75Kg/cm2 after immersing the bricks for six hours in water before use, including splays cutting,circular molding& corbeling,chamfering & similar such type of works,watering and curing etc complete including cost, conveyance, royalties and taxes of all materials & cost, conveyance, taxes of all labour with T&P required for the work etc. complete in all respect as per the direction of Engineer-in-charge.

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

12 mm thick cement plaster with cement and sand mortar (1:4) finished smooth over inside rough surfaces of brick masonry walls etc with watering and curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge.

6 mm thick cement plaster with cement and sand mortar (1:4) finished smooth on RCC surface etc with watering and curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge.

Providing for supplying, fitting and fixing vitrified tile in floors of size 600mm x 600mm of approved make and of approved quality and shade laid on floors using 25mm thick cement and sand mortar in ( 1:4) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including cost conveyance taxes of all materials and cost conveyance of all labour with T&P etc. complete in all floors in all respects as per direction of Engineer-in-Charge.

Providing fitting, laying and fixing of approved quality Ceramic glazed wall tile of approved make and shade of premium grade having thickness 6.5 mm to 6.7 mm conforming to IS 13753 for sizes 30cm x 20cm / 20cm x 20cm of special plane / printed series of approved quality & make laid on vertical faces of walls,dados skirting and risers of steps using 12mm thick cement and sand mortar in (1:3) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing,watering and curing etc including cost conveyance taxes of all materials and cost, conveyance,taxes of all labour with T&P required etc. complete in all respects as per direction of Engineer-in-Charge.

Supplying fitting fixing of WPC chowkath/Frame (125MMX50MM) Decorative of approved quality and dimension etc complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineering in Charge.

Providing fitting and fixing of 32 mm thick flush door shutter made up with 35 mm thick BWR Block board and pested with both sides 4 mm thick veneers including malamine polish at both side and including conveyance ,cost & taxes of all materials & labours . The shutter fixing in all respect such as hinges, mortise lock, handle, door closer including all cost, conveyance, labour, T&P etc complete..

75mmx50mm WPC Frame Decorative

28mm WPC Door

Fixing & hardware fittings for 28mm WPC Door& 75mmx50mm WPC Frame Decorative

Supplying,fitting and fixing of window (sliding type) made of alluminium section 9778 as windows frame , section no. 4095 ,4096 and 9777 ,3994 as shutter frame with 5 mm thick black glass as panel fitted with rubber bidding including all fitting & locking arrangement complete including cost, conveyance royalties and taxes of all materials and cost,taxes of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge.

Providing, supplying, fitting and fixing of M.S. door,wind

ow, grill gate,ladder made out of M.S. flat and M.S. angle , M.S. square bar conforming to IS 1977/ 1975 of approved design and drawing (design and drawing to be supplied from the Engineer in charge) including drilling holes in frames etc supplying required size of M.S. screws and cutting grooves or beads where necessary including cost, conveyance, and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per direction of the Engineer in charge.(including provision or designed and ornamental fabrication works with cast iron members managing safety,sustainability and aesthetics)

Finishing surface of walls with Cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour etc complete as per the direction of the Engineer in charge.

Priming one coat with af approved quality of primer of Berger paint make including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge

Wall painting two coats with a plastic emulsion paint of approved shade over wall surface finished smooth to give an even shade including watering,curing etc complete including cost,conveyance,taxes of all materials and cost,conveyance,taxes of all labour with T&P required etc complete in all respects as per the direction of Eng.-in-charge.

Priming one coat with of approved quality of primer of Berger make including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge. (OVER IRON SURFACE)

Painting two coats with synthetic enamel paints to iron / wooden doors and windows with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge

20 mm thick grading plaster (1:2:2) using sand and bajuri of approved quality including watering and curing etc complete to required level including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge.

Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. (DSR 2021, Page No: 203, Item No-13.45)

Providing and fixing of ‘Unistone’ or ‘Ecovision’ or ‘Birla’ equivalent Glass Reinforced Concrete (G.R.C) Wall Cladding Tiles in approved design, size 282mm X 94mm & 190mm X 94mm, texture, thickness, pattern and color. The thickness of the tiles should range between 12 to 20 mm (depending on the texture of the tile), allowing variance of 2 mm in accordance with IS: 1237‐1980. The composition of tiles should be ‘43’ Grade Portland cement, reinforced with Alkali Resistant Glass Fiber and homogeny pigmentation should be done with exterior grade synthetic inorganic iron oxide pigments manufactured by ‘BAYFERROX / Lanxess (Germany)’ or equivalent. The pigmentation should be homogeneous and in accordance with British Standards BS EN 12878:1999. The other additives should be fine washed graded quartz, super plasticizers and integrated water proofing agents and others. The tiles should be produced with high vibration technology and concrete mix design compressive strength equivalent to M‐40 Grade@28 days. The top surface of the tiles should be sealed with acrylic lacquer resulting in surface water absorption of tiles, less than 1% and water absorption by 24 hrs immersion method, less than 8%.The tiles should be applied on a rough plaster of 1:3 cement mortar 1:3 (1cement: 3 coarse sand) and the fixing of tiles should be done by recommended adhesives by the service provider or equivalent as per manufacturer’s laying instruction. (Market Rate)

Supply and fixing of 1mm (10% +/-) Polymer based Louver ceilings Systems of PARE Innovations of panel sizes of 265mmx3660mm along with option to custom size to a maximum of 12800mm in length in approved shade, manufactured in India, made with High temperature thermal transfer technology, waterproof, fire retardant and anti- bacterial. Termite resistant, rust proof material. Panels to be installed with GI sections of suitable gauge & size, subject to change according to site conditions. Panels to be installed using suitable, same shade J-Trim with dimensions 39x20x3060 (all in mm) for edge profiles. Panels are maintenance free and with 10 years warranty for colour & finish of the panels Including trims of PARE Innovations. All material, accessories, ancillary component all as per recommendation of PARE Innovations.(Market Rate)

Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018.( SOR: Page No 233, Item No: 2)

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.

3/4" dia CPVC Pipe

Proceiian EWC with S-trap

Wash Basin (24"x18")

Pedestal for basin

Polymide braided connecion pipe 15mm dia, 450 mm long

1 1/4" CP West

1/2" (15mm) CP Pillar cock

1/2" (15mm) CP Bib cock long nose

1/2" (15mm) CP Angle stop cock

CP Health Fucets with 1 RM PVC tube

CP Soap dish

CP Towel ring

24"x5" Acrylic glass Shelf

Bevelled edge Mirror (24"x18")

125mm CP Grating

Laying in trenches 4" dia PVC pipes and specials of the for all classes including earthwork in excavation, CC (1:4:8), CC (1:3:6) with refilling trenches and ramming etc. jointing with supply of approved solvent cement by heat application method including testing as per specification complete.

25mm dia CPVC pipe (water supply)

Providing and fixing on wall face 4" U-PVC SWR pipes soil, waste and rain water pipes conforming to IS : 13592 Type

A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes

4" PVC Cowel

4" PVC SWR Pipe Clip

1 1/2" dia UPVC FW Valve

1" dia UPVC FW Valve

10 Ltr PVC Low Level Cistern

EWC PVC Seat cover

40 mm dia CPVC pipe (water supply)

Supplying all materils, all labour with T&P, all accessories and equipments for providing construction of Inspection chamber in Sewerage system of size (2'6" x 2'6" x 1'6") including cost,conveyance,taxes of all materials and cost,conveyance,taxes of all labour with T&P required etc complete in all respect as per PH specification and direction of Engineer in Charge

Circuit Cum Wiring

Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed 1.6 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required. (Switch Socket:- Legrand/ ABB/ Panasonic)

Primary Point Group C

Fan & indoor Fixtures

Supplying, installation, testing and commissioning following type of light fixtures with dummy box for surface mounted fixtures only, fans and exhaust fans with all accessories, as required.(The colour temprature for fixtures shall be above 3500 deg K & white in colour as per application)

Wall mounted Up&Down RECTANGULAR Light fitting (4 W) consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution similar to Wipro / Panasonic/ Philips.Wipro UP DOWN 4W WALL MOUNTED (CAT No: LW23-101-XX-40-UDX)

Recess Mounted LED Light fitting (900 Lumen/ 9 W, CRI not less than 80,CCT of 5700 degree K) consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution similar to Wipro (CAT No: LD06-111-XXX-57-XX) / Panasonic/ Philips..

Supplying, installation, testing and commissioning of BEE star rated ceiling fan /wall mounted including earthing etc as required.

400 mm sweep wall mounted

300mm sweep

LOGO & LETTERING