REPAIRS TO ROOF TREATMENT, AC SHEETS, JOINERY, FLOORING AND MISCELLANEOUS B/R WORKS AT ORS/JCO/TYPES-III MARRIED ACCOMODATIONS OF MUDFORT AREA UNDER AGE B/R (S) NO-II OF GE (SOUTH) SECUNDERABAD

Amount

Demolition of cement concrete in roof inc existing roof treatement (other than ground floor) and removing debris to a distance of n.exc 100M away from the bldg complete all as specified and directed.

M & L for 25 mm average thick PCC (1:2:4) Type B0 by using 12.50 mm graded stone aggregate as in roof where required over slabs and finishing the exposed surfaces fair even without using extra cement complete all as specified and directed.

M&L for removal of old treatment of any description and removing the debris including roughening the surfaces of old concrete roof surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

M & L 10mm thick rendering in CM 1:4 using water proofing compound at the rate of 3% weight of cement over concrete surfaces complete all as specified and directed. ( Note : WPC measured and paid separately).

M&L priming the plastered roof surfaces with bitumenous primer @ 0.30 Kg per sqm and applying APP based polymeric membrane minimum weighing 3 Kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/per Sqm) and on primed surface by forced application over apply bitumen base aluminium paint @ 0.20 Kg/Sqm complete all as specified.

Supply only water proofing compound.

M & L cutting grooves in brick wall/roof slab of size 75mm wide 65mm deep and shapping to horizontal face of the groove with cement mortar 1:3 complete all as specified and directed.

Taking down rain water pipes of any description any pattern incl all fittings heads, shoes bends etc all as specified.

S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls all as specified.

Dismanting asbests cement (corrugated, semi-currugated etc.) sheets in roof covering complete all as specified and directed.

S & F, 6mm thick, asbestos cement, corrugated or semi-corrugated sheets in roofs, etc. fixed with L Hook or cranked bolts. complete all as specified and directed.

S & F prepainted galvalume aluminium zink coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/cladding to wall fixed with self tapping screws as specified.

S&F pre painted gal valume aluminium zink coating GI based plain steel sheeting 0.5mm thick of any colour haing tensile strenghth of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws as specified.

Dismantling wrought iron or mild steel work of any description not other wise provided for. complete all as specified and directed.

Fixing only rolled section as in rails and cross beams, hip and jack rafters purlins, where connected to common rafters and running rails all as specified and directed.

S & F roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A.

M & L providing cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in roof curves or muds, stops, rounded or chamfered on edges complete all as specified and as directed.

M&L Preparatioin of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat primer all as specified & directed.

M&L Preparatioin of old steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint all as specified & directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc all as specified and as directed.

M & L for brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 all as specified and as directed.

Taking down plastering on brick walls etc including racking out joints, hacking for key, scrabing down with water etc. complete all as specified and directed.

M & L for 15 mm thick rendering in Cement Mortar 1:4 on fair faces of Brick works or Concrete surfaces and finishing even and fair without using extra cement. complete all as specified and directed incl scaffolding if necessary. Note : Patch work upto height 7.50m incl necessary scaffolding.

M & L for 15 mm thick rendering in Cement Mortar 1:6 on fair faces of Brick works or Concrete surfaces and finishing even and fair without using extra cement. complete all as specified and directed.

M & L for 10 mm thick rendering in Cement Mortar 1:3 on fair faces of Brick works or Concrete surfaces in ceilings and finishing even and fair without using extra cement. complete all as specified and directed. Note : Roof projection/sun shade portion upto ht 7.50m incl necessary scaffolding.

S&F Hard drawn steel wire fabric cut to length, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia in reinforcement n exc 2kg per Sqm.

M&L for two coats of cement base paint over a coat of primer on new surfaces of wall including preperation all as specified and as directed.

M&L for two coats of Dr Fixit Rain Coat paint over a coat of primer on old surfaces of wall including complete removal an preperation all as specified and as directed.

M&L for two coats of OBD over a coat of primer including preparation of new plastered surfaces of walls all as specified and directed.

M&L for three coats of white wash including preparation of new plasted ceiling all as specified and directed.

M&L Preparation of plastered or unplastered old decorated surfaces and applying one coat of white wash on ceiling surfaces.complete all as specified and directed.

M&L Preparation of plastered or unplastered old decorated surfaces and applying one coat of oil bound distemper on walls. complete all as specified and directed.

M&L Preparation of plastered or unplastered old decorated surfaces and applying two coats of oil bound distemper on walls. complete all as specified and directed.

Demolition of cement concrete in any desscription and any position paving exc 15 cm thickness below and above ground level all as specified and directed.

Taking down the plaster incl existing treatment in sunken portion, washing down with water and applying 15mm thick plaster in CM 1:4 with 3% WPC all around incl floors and applying Shaliu Urethane BTD two coats @ 1.5 Kg/Sqm each Coat (Apply 2nd Coat after 6 Hrs) over a coat of Shali Pime WP @ 200gm/sqm and Provide 40mm GI Spout Pipe complete all as specified and as directed.(Note : Supply of water proofing compound will be measured and paid separately).

M&L for PCC 1:4:8 type D-2 using 40 mm graded brick aggregate as in filling of sunken portion etc complete all as specified and directed.

Disconnecting existing tanks setting aside (or laying if required) for carry out the roof repairs cleaning and removing all scale & dirts etc from tanks & hoisting reconnecting & refixing in position of the tank capacity exc 250 Ltrs & n.exc 500 ltrs including necessary fittings all as specified and directed.

Disconnecting existing tanks setting aside (or laying if required) for carry out the roof repairs cleaning and removing all scale & dirts etc from tanks & hoisting reconnecting & refixing in position of the tank capacity exc 500 Ltrs & n.exc 1000 ltrs including necessary fittings all as specified and directed.

Taking down chowkat with frame (without taking off shutter from the frame) n exc 1.50 Sqm each complete all as specified & directed.

All as per item No 39 above but area exc 1.5 Sqm n.exc 4 Sqm each complete all as specified.

Taking down shutter of any description not exc 1 Sqm each complete all as specified complete all as specified & directed.

Taking down shutter of any description exc 1 Sqm & n exc 2 Sqm each complete all as specified complete all as specified & directed.

Taking down steel/aluminium windows, and aluminum doors, partions etc., of any size with frame and shutters and including with all connected accessories complete.

All as per item No 43 above but for ventilators.

M & L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing.

M&L for plain cement concrete type C-1 1:3:6 (20mm graded aggregate) for setting hold fasts, steel windows all as specified and directed.

S&F bands, straps, supports or stays for rain watr, ventilating pipes including bolts if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasta, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles confirming to Fe-290 Gde E-165.

M & L for 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S&F in frame at siteFactory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, as per specification & drawing.

S&F for 35mm thick factory made plain framed paneled shutter of 2nd class HW (any Number of panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm th venered particle board with veneering on both face kiln seasoned & chemically treated complete all as specified & directed.

S & F 35mm thick 2nd class hard wood glazed skeleton shutters open rebated and prepared to receive glass and divided into square with plain, rounded, chamfered, mitred and rebated sash bars.complete all as specified & directed.

S & F 25 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type oon both side complete all as specified and directed.

S & F 100mm long Stainless steel butt hinges with galvanised aluminium pin.complete all as specified & directed.

S & F 100mm butt hinges medium weight cold rolled mild steel complete all as specified & directed.

S & F Aluminium handle 150mm fabricated type complete all as specified & directed.

S & F Aluminium anodised barrel tower bolts 150mm of extrded section complete all as specified & directed.

S & F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S&F 300 mm long helical door springs including roller plate complete all as specified & directed.

S& F for 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor.

S & F, steel windows with frame and side hung shutters including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded (Ref Drg No : TD - 540) complete all as specified & directed (copy of TD -540 can be obtained from GE office for reference).

All as per item No 60 above but without glazing bars.

S &F for framed work such as grills, grating etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars (for windows); barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work cnforming to Fe 290. Gde E-165.

S & F, steel ventilators frame with top hung shutter including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified & directed.

S & F galvanized mild steel wire cloth 0.56mm nominal dia of wire with avg 1.18mm width of aperture and fixed with tinned tacks. complete all as specified & directed.

All as per item No 64 above but fixed in repairs complete all as specified & directed.

Hacking out old broken glass any description & size from wooden/steel window and removal of rubbish from work site as directed.

S & F 3mm th sheet glass ordinary quality and fixed with oil putty in square not exc 0.5 sqm in each pane complete all as specified & directed.

S & F 3mm th figured glass ordinary quality and fixed with oil putty in square not exceeding 0.50 sqm in each pane complete all as specified and directed.

S&F in repairs 19mm thick block board grade 2 quality, interior grade, commercial type on both faces fixed as in shutter/shelves of cup boards etc complete all as specified & directed.

S&F aluminium/metal door seal with wire brush fixed at bottom of the door (to prevent the insets from outside approx length of 1 mtr) complete all as specified & directed.

M & L for preparation of new wooden surface and applying 2 coats of synthetic enamel paint over one coat of pink primer over 10cm width or girth complete all as specified.

M & L for preparation of old wooden surface and applying two coats of synthetic enamel paint over 10cm width or girth complete all as specified.

M & L for preparation of old wooden surface and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified.

Demolition of cement concrete(unreinforced) in ground floors and paving nexc 15 cm thickness (below and above ground level) complete all as specified & directed.

M&L cement concrete 40mm thick type B- 1, 1:2:4 (20mm graded agg) as in floor finishing cement concrete surface even and smoothwithout using extra cement .

M&L forming 38mm wide construction joints Glass dividing strips, 3 mm thick complete.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded stone aggregate) finished fair & even as in Sub base flooring complete all as specified & directed.

M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified & directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exc 0.06 and not exceeding 0.11 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified & directed.

S&F rotational moulded polyethylene water storage tanks 500 litre capacity incl (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling and taking down existing water tank complete all as specified & directed.

S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified & directed.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore in repairs.

S&F 15 mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified & directed.

S&F 20mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified & directed.

S&F for 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including taking down complete all as specified & directed.

S&F for 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including taking down complete all as specified & directed.

S&F in repair 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screweddown, screwed foriron pipe or for brass ferrule and fixed complete all as specified & directed.

S&F in repair 15mm bore pillar tap cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe.

S&F in repair two way fancy type angle cock 15 mm chromium plated complete fancy type of branded as specified and directed.

S & F in repair health faucet with spray jet (hand shower) cromium plated incl all fitting & fixtures complete all as specified.

S&F for 32 mm dia Waste cupling fittings, brass, chromium plated for kitchen sinks,Wash Hand basins, etc. with long screwed shanks and fly-nuts, incl PVC waste pipe all as specified & directed.

M&L 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement in repairs all as specified and directed.

M&L for cutting hole in brick masonary/RCC for fixing rain water outlet pipe including finishing with PCC all as specified and directed.

M&L for removing plants incl complete root in wall and roof, also repair and finish with PCC (1:3:3) upto height of 7.5m all as specified and directed.

Demolition of stone slabs of any description or thickness in floors, aprons, etc laid, bedded and pointed in any mortar.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for chequered cement concrete tiles with grey cement and pigments of size 300cmx300cmx20-25mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick CM 1:6 screed bed in flooring complete all as specified & directed.

S&Fin repair WHB vitreous china (flat back or angle back type ) ,including cutting for pinning in ends size 550x400 mm including brackets ,waste pipe ,coupling ,PVC connection, waste pipe and CP piller tap complete. all as specified & directed.

S & F in repair Vitreous china Squatting pan Orissa pattern of size 580mx440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete.all as specified & directed.

S&F in repairs wash down water closet (pedestal pattern) white with plastic water closet seat cover closed pattern incl "P" or "S" trap with flat bottom and mild steel chromium plated or aluminised hinging device , 10 ltrs capacity PVC Low level Flushing incl flushing pipe of low density PVC 32mm dia complete.

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density PVC. 32 mm dia all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm all as specified and directed.

S & F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S&F in repairs stainless steel Kitchen plate rack of size 34"x35"x9" all as specified and directed (Make : Hindustan) wt not less than 2.50 kg.

ATUL ENTERPRISES

SAMBASIVA RAO

S.R.M.K Enterprises

Vara Enterprises

G SATISH REDDY AND CO

BEEGEE DESIGN SYSTEMS

B AND H CONSTRUCTIONS

M/S DIVIJA BUILDERS

VENKATA PRABHAVATHI CONSTRUCTIONS

K LAKSHMAN SINGH AND CO

PAVAN ENTERPRISES