CONSTRUCTION OF TRANSIT FACILITY AT AJAYMERU COMPLEX DAD RESIDENTIAL COLONY JAIPUR

Amount

Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "ROAD, PATH AND CULVERT etc." as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION " as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "COOLING APPLIANCES" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "LIGHTNING PROTECTION " as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for " EXCAVATION & EARTH WORK " as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Sch 'A' Sec-XII (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under SCH A PART-XI (Excavation and earthwork schedule).

INTERNAL WATER SUPPLY

S&F bib taps 15 mm bore cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union compete all as specified and directed. Cat Part No: 35037 PM of Make : Jaquar or equivalent cat part No. of Make given in Appendix 'B'.

S&F bib taps 15 mm bore 2-in-1 cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union compete all as specified and directed. Cat Part No: 35041 PM of Make : Jaquar or equivalent cat part No. of Make given in Appendix 'B'.

S&F kitchen mixer 15mm bore cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union for kitchen compete all as specified and directed. Cat Part No: 5309N of Make : Jaquar or equivalent cat part No. of Make given in Appendix 'B'.

S&F sink cock 15 mm bore cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union compete all as specified and directed. Cat Part No: 5347N of Make : Jaquar or equivalent cat part No. of Make given in Appendix 'B'.

S&F WHB mixer single lever 15mm bore swan neck cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union compete all as specified and directed. Cat Part No: 35011BPM of Make : Jaquar or equivalent cat part No. of Make given in Appendix 'B'.

S&F Brass chromium plated shower rose 150mm x 150 mm size with or without swivel joints, any size, inclding fixint to steel pipe or union complete all as specified and directed. Cat Part No : 1605 of Make : Jaquar or equivalent cat part No. of Make given in Appendix 'B'.

S&F Brass chromium plated shower arm 15mm size, including fixing to steel pipe or union complete as specified and directed. Cat Part No : 47913005 of Make : Jaquar or equivalent cat part No. of Make given in Appendix 'B'.

S&F brass CP water spout 15mm bore (Tap) Complete all as specified and directed. Cat part No : 35429PM of Make : Jaquar or equivalent cat part No. of Make given in Appendix 'B'.

S&F 15mm dia Angle valve, cast copper alloy chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron ipe or for unions & fixed. Cat part No : 35053PM of Make :Jaquar or equivalent cat part No. of Make given in Appendix 'B'.

S&F wall mixer brass hot & cold, 15mm bore (Concealed body Diverter complete) with connection to overhead shower, bright finish, screwed to ends for iron pipe and plugging complete all as specified and directed. Cat No ALD 079 Make : Jaquar or equivalent cat part part No. of Make given in Appendix 'B'.

S&F brass CP health faucet 1.2m chain complete all as specified and directed. Cat part No 573 of Make : Jaquar or equivalent cat part No. of Make given in Appendix 'B'.

S&F brass toilet paper holder with flap complete all as specified and direceted. Cat part No 35753PS of Make : Jaquar or equivalent cat part No. of Make given in Appendix 'B'.

S&F 32 mm bore brass CP grating with long shank for wash hand basin. Cat part No : 705 of Make : Jaquar or equivalent cat part No. of Make given in Appendix 'B'.

S&F 32 mm bore PVC waste pipe 75mm long of approved make specified in Appendix 'B' complete all as specified and directed.

MODULAR KITCHEN

M&L 18mm thick HDHMR board for kitchen shutter panel, one side gloss laminate and one side white backer,further processed in factory to cut size and four side PVC edge band 1.3mm applied by throughfeet machines incl screws,araldite,pvc washer 1mm,iron washer 1mm etc complete all as specified and directed.

M&L 18mm thick HDHMR board for kitchen glass shutter with 5mm thick clear glass incl necessary beading, board on one side gloss laminate and one side white backer,further processed in factory to cut size all as specified and directed.

M&L 18mm thick HDHMR board for kitchen boxes both side white backer, further processed in factory to cut size and four side PVC edge band of 0.45mm applied by throughfeet and interlocked on mini fixes incl screws,araldite,pvc washer 1mm,iron washer 1mm etc complete all as specified and directed.

S&F 8mm thick clear glass shelf for kitchen boxes all side PG or bevelled incl necessary beading all as specified and directed.

M&L 15mm thick HDHMR board for kitchen boxes both side grey backer, futher processed in factory to cut size and four side edge band of 0.45mm applied by throughfeet incl screws,araldite,pvc washer 1mm,iron washer 1mm etc complete all as specified and directed.

S&F innotech drawer for storage of depth 520mm and grey in color, height 150mm and width 470mm complete all as specified and directed. Make :- Hettich, Hafle, Ultima

S&F innotech drawer for storage of depth 520mm and grey in color, height 100mm and width 470mm complete all as specified and directed. Make :- Hettich, Hafle, Ultima

S&F stainless steel 110 degree openable auto close soft hinges complete all as specified and directed. Make :- Hettich, Hafle, Ultima

S&F stainless steel 180 degree and 165 degree openable hinges for L corner complete all as specified and directed. Make :- Hettich, Hafle, Ultima

S&F stainless steel 110 degree openable auto close soft hinges for blind corner hinges complete all as specified and directed. Make :- Hettich, Hafle, Ultima

S&F 100mm two shelf wire stainless steel 302 grade BPO side mounting complete all as specified and directed. Make :- Hettich, Hafle, Ultima

S&F 20 inches ball bearing telescopic channel of 45kg load carrying capacity complete all as specified and directed. Make :- Hettich, Hafle, Ultima

S&F PVC for cutlery of size 800mm with self partition complete all as specified and directed. Make :- Hettich, Hafle, Ultima

S&F stainless steel wire partition for cup & saucer width 370mm, depth 535mm and 90mm height complete all as specified and directed. Make :-Evershine, Hafle, Ultima

S&F stainless steel wire partition for thali holder 470mm width,535mm depth and 180mm height complete all as specified and directed. Make:- Evershine, Hafle, Ultima

S&F of PVC anti skid mat 1mm thick in grey color complete all as specified and directed. Make :- Hettich, Hafle, Ultima

S&F 600mm/24 inch carousel in two level mounted on pipe stainless steel wire complete all as specified and directed. Make:- Evershine, Hafle, Ultima

S&F 150mm bracket for cabinet hanging complete all as specified and directed. Make :- Hettich, Hafle, Ultima

S&F PVC leg 40mm dia and 100mm height for base carcase support complete all as specified and directed. Make :-Rehau

S&F 100mm high PVC skirting ,5mm thickness complete all as specified and directed. Make :-Rehau

S&F stainless steel two shelf wire detergent holder size 150mm width , 485mm depth and height 430mm complete all as specified and directed. Make:- Evershine, Hafle, Ultima

S&F stainless steel 14 litre capacity auto lid waste bin complete all as specified and directed. Make :- Hettich, Hafle, Ultima

S&F Pull grip handle of size 150mm stainless steel finish complete all as specified and directed.

S&F kitchen sink of single bowl with drain board stainless steel grade 302, 1143mmX460mmX230mm complete all as specified and directed.

Supply,installation testing and commissioning of Electric chimney 90cm with wave sensor,smoke sensor,gas sensor,temp display ,auto glass opening ,big LED lights ,auto clean,oil collector cup,timer, 3 speed motor 1400 Cum/hour suction power stainless steel body and heavy duty copper motor complete all as specified and directed. Make :- Surya/Faber/Hindware/Glen

INTERNAL ELECTRIFICATION:

S&F 20W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make : Crompton, Cat part LDL-20-CDL or equivalent Cat part of make specified in Appendix 'B'.

S&F 18W recess mounting LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W,>6500K, thoughtfully designed with sleek and seamless aesthetics, white powder coated housing and front cover in CRCA sheet, high efficiency transclucent (HET) diffuser for better light trasmisssion, high efficancy LEDs and high performance driver, ideal for green lighting solution, suitable for modular ceilings for installation in POP/flase ceiling having input voltage 220- 240V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make : Crompton, Cat part LSCSM-18W-18WW or equivalent Cat part of make specified in Appendix 'B'.

S&F 09 W recess mounting LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W,>6500K, thoughtfully designed with sleek and seamless aesthetics, white powder coated housing and front cover in CRCA sheet, high efficiency transclucent (HET) diffuser for better light trasmisssion, high efficancy LEDs and high performance driver, ideal for green lighting solution, suitable for modular ceilings for installation in POP/flase ceiling having input voltage 220- 240V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make : Crompton, Cat part LCDEP-09-CDL or equivalent Cat part of make specified in Appendix 'B'.

S&F 12 W surface/ceiling mounting LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W,>6500K, thoughtfully designed with sleek and seamless aesthetics, white powder coated housing and front cover in CRCA sheet, high efficiency transclucent (HET) diffuser for better light trasmisssion, high efficancy LEDs and high performance driver, ideal for green lighting solution, suitable for modular ceilings for installation in POP/flase ceiling having input voltage 220- 240V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make : Crompton, Cat part LCDEP-12-CDL or equivalent Cat part of make specified in Appendix 'B'.

S&F BEE five star rated energy efficient high-speed ceiling fan having 1200 mm blade sweep, air-flow not less than 210 CMM, operating voltage 220-240 V and frequency 50 Hz, including a downroad of suitable size and electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed. Cat Part No. B013 K6 IP66 of Make Crompton ,Cat part No. B01 M0505 SJ of Make Orient or equivalent Cat part of make specified in Appendix 'B'.

S&F engery efficient metalic body exhaust fan having blade sweep 300mm, air delivery not less than 900 cum/h, operating voltage 220-240V and frequency 50 Hz, including electrical connection with 3 core flexible copper conductor cable of appropriate size from ceiling rose to the fresh-air fan and making necessary hole in wall and make good to finish surface complete all as specified and directed.

S&F 25W LED Street light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 100 lumen/W, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP-66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket arm OD 35 mm to 42mm including necessary electrical connection to the fixture with 3 core flexible Copper conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed. Make : Crompton, Cat part LSTS-25-CDL/NL-M or equivalent Cat part of make specified in Appendix 'B'.

S&F ISI marked MCB for AC supply till 63 A, having breaking capacity Icn = 10 kA, conforming to IS/IEC 60898-1-2002, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters,for following all complete as specifed and directed.

6-32A, SP MCB, B-curve

25A, TP MCB, C - curve

Supply and fix rigid PVC conduit, 20 mm dia, with fittings / accessories all fixed concealed in walls/ceiling, (as per P&T standard) for telephone connection and TV wire.

S&F modular RJ11 for telephone socket tools less complete with mild steel sunken boxes with earth dolly zinc coated and including mounting frame & over cover plate.

S&F 100 A, MCCB, TPN, 415 Volt, thermal magnetic release, Ics = 100% Icu

S&F 25A, 16KA, MCCB, TPN, 415 Volts, thermal magnetic release, Ics = 100% Icu

S&F 10 W mirror light of wall mounted LED batten having high efficiency long life LED chips with luminous efficancy of > 100 lumen/W, independet isolated SMPS based constant current electronic LED diriver with THD <20%, surge voltage protection and other safety tests as per IS:15885 (Part-2/Sec-13) : 2012, plycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220-240 V, inputfrequency 50-60 Hz, PF > 0.95, including electrical connection with 3 core flexible Copper conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make : Crompton, Cat part LDL-10-CDL or equivalent Cat part of make specified in Appendix 'B'.

S&F 10 W decorative light of surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficancy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED diriver with THD <20%, surge voltage protection and other safety tests as per IS:15885 (Part-2/Sec-13) : 2012, plycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220-240 V, inputfrequency 50-60 Hz, PF > 0.95, including electrical connection with 3 core flexible Copper conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

S&F modular TV socket complete with mild steel sunken boxes with earth dolly zinc coated and including mounting frame and over cover plate all as specified and directed.

S&F telephone switch board cable of size 0.5mm ATC PCV insulated all complete all as specified and directed.

S&F TV socket cable solid annealed copper conductor, JF, aluminium foiled and aluminium wire braided, RJ - 11 (foam) complete all as specified and directed.

EXTERNAL WATER SUPPLY

M&L for construction of brick masonary valve pit / chamber of under mentioned sizes, all as shown in drawing No TD-573, including necessary excavation and earth work. PCC, plaster in CM 1:6 on inside and outside (above ground) , MS angle iron 40 x 40x6.0 mm thick.

(a) Chamber size 900 mm x 600 mm x1000 mm (Internal dimensions)

(b) Chamber size 450 mm x 450 mm x600 mm (Internal dimensions)

M&L for cutting of existing pipe-line of 100/150/80 mm dia for taking branch connection alongwith insertion of DI tee and connectiong material such as joint. Nut/ bolts, etc complete all as required at site.

EXTERNAL ELECTRIC SUPPLY

S & F Fabricating LT panel outdoor type, dust and vermin proof(including CPRI test certificate) totally enclosed , with sloping canopy fabricated out of steel sections, the door opening shall not be less than 150 degree. The construction of panel board shall be dust, vermin proof, IP 64 standard double shutter gears front and rear frame work and 3.15 mm thick MS sheet duly painted with powder coated over two coats of redoxide primer and made of 40 x 40 x 6 mm thick angle iron frame all as specfified suitable for 415 Volts, 50 Hz 3 phase and nuetral system and shall be completed with 400 amps capacity Copper bus bar having length not less then 60 cm with bus bar chamber,internal wiring with suitable size of PVC insulated copper cable copper lugs including comprising of following accessories Incoming: (a) MCCB 4 pole 200 A, 35 KA with thermal & magnetic adjustable setting( Inncoming) - 01 No (b) LED Multifunctional meter - 01 No (c) Indicating lamp - set of three Outgoing: (a) MCCB 4 pole 100 Amps with thermal & magnetic adjustable setting 25 KA( For main DB) - 02 Nos (b) MCCB 4 pole 40 Amps with thermal & magnetic adjustable setting 25 KA( For Fire fighting and Lift) - 02 Nos

Supply, installation, commissioning and testing complete of Manufacturer or OEM (Original Eqpt Manufacturer) manufactured and tested static Diesel Engine driven generating set capable of delivering 63 KVA continuous rating, (10% overload for 1 hour in 12 hours of operation), 415 volts (AC 3 Phase, 4 wire system of supply), 50 Hz at power factor 0.8 minimum. The DG set shall consist of a diesel engine coupled directly to a matching alternator, and mounted on Dunlop metallastik foundation pads on a common base frame and thereafter installed in the CPCB approved acoustic enclosure complete with control panel standardised by manufacturer, fuel tank with mounting arrangement and inlet, outlet, return oil arrangement, flexible exhaust pipe complete all as specified and directed and shall include comprise of the following : -(a) Engine (prime mover) : Diesel engine 1500 RPM, of suitable HP as recommended by manufacturer, water cooled, turbocharged, 12 volts electric battery start, complete with fly wheel and torsional vibration damper, radiator and all standard fittings/ fixtures as per standard manufacturing practices and including suitable instrument panel with RPM meter, lub oil temp and pressure gauge, water temp gauge and frequency meter (digital type), battery charging ammeter and fuses, and also including self starter ( 12V), battery charging alternator, fuel tank etc and complete with HWT and LLOP alarm and shut down safeties complete with first fill of Lub oil and Coolent. Make of CUMMINS or equivalent KIRLOSKAR (KOEL)/GREAVES.

(b) Alternator : AC alternator, brushless, 415V AC 50 Hz, 3 phase , 4 wire type, rated for continuous output of 63 KVA, PF 0.8 (lag), 1500 RPM insulation class ‘H’; enclosure SPDP (IP 22/23), self excited & self regulated with AVR for + 1 % voltage regulation, coupled directly / suitably to and to match the above engine and conforming to BS 5000/IS 4722 . Alternator makes shall be KIRLOSKAR/ STAMFORD / GREAVES/ BHARAT BIJLEE'. (c) Dunlop Metallastik anti-vibration pads for mounting engine – alternator assembly on the base frame/ plate. (d) Base plate : Made out of structural steel as per manufacturer’s recommended design/ specifications. (e) Enclosure : Provision of an integral type, approved / certified acoustic enclosure as per latest CPCB norms, for the DG set to restrict the noise level to 75 DB (A) at one metre and ensure that temperature rise within the canopy shall not exceed 5 – 7 degree celsius. It shall be made of 16 SWG CRCA MS sheet with powder-coated finish on outside and high quality noise absorbent and fire retardant grade acuoustic insulation material duly provided with EPDN gasket lining. There shall be four hinged doors out of which one shall be with a glass window. The base frame shall be of ISMC . It shall also include the following: -

(i) Silencer: Absorption type, non-resistance, residential. (ii) Internal wiring with PVC copper conductor cables, IS 694 marked, FRLS in conduit and suitable light fittings. (iii) Fuel tank to be provided as per OEM specification. (iv) Safeties for high enslosure temperature and emergency shut-down from outside. (v) 1Nos 12V of suitable AH lead acid batteries(MAKE:- EXIDE/AMRON/AM) and adequate size copper conductor cable leads, housed on & including suitable size MS angle iron frame and necessary clamps, nuts, bolts, washers all as required & as per manufacturer design / specifications. (f) Control panel : Contro panel made out of 14 gauge CRCA sheet , powder coated and shall consists of the following: - (i) Ps 0500 Controller (ii) Aluminium Bus bars with suitable capacity incoming & outgoing terminals. (iii) Indicating lamps for load on and 'set running' (iv) Instrument fuses duly wired and ferruled. (v) Circuit breaker(MCCB) of suitable rating with overload and short circuit protectons. Note: To be mounted inside enclosure. (g) Automatic mains failure (AMF) control panel fabricated from CRCA sheet steel of thickness not less than 3.15 mm, suitble for outdoor installation (Including CPRI type test certified), dust & vermin proof, protection class I P-54 suitable for 415 volts , 3 phase , 4 wire, 50 Hz, AC supply system with adequate layers of power coating floor mounting type with front opening, the AMF panel shall comprise the following indicating instruments & switches:-

Set of Bus bars - One The control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections. KW meter - One set of bus bar - One The control cubibal will be furnished complete with the necessary control circuite fuse etc and will have provision for making incoming and outgoing connections One - set of bus bar - One The control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections. Note :(i) In case AMF panel included instead of Standard Control Panel, then Battery charging alternator with inbuilt regulator and battery charging ammeter should be deleted from engine specifications since Battery charger included under AMF Panel specifications. (ii) Platform : PCC foundation /plinth/base shall be provided as per drawing No: TD/2010/109, Sheet No 1/1. (iii) Tool kit, Operation and Maintenance catalogue, 1 year spare part list,overhauling manuals,guarantee card etc shall be provided as per manufacturer standard practices.

Supply, install, testing and commissioning of out door type, step down transformer, PCC mounted 11 KV/433 Volts, 100 KVA (at no load) AC 3 phase 50 Hz, f, core type, double copper wound, oil immersed, naturally cooled, Oil Natural- Air Natural (ON AN), with external cooling tubes, delta connected on primary side (HV) and star connected on secondary side (LV) in accordance with vector group DYn-11 with Neutral brought out on secondary side (LV side) and having tapings at ± 5% in step of 2.5% on HV side to be changed by means of hand operated off load tap changer gear. The maximum temperature rise should not exceed 45 degree celsius in oil and 55 degree celsius in HV/LV winding when measured by resistance method after continuous full load run on an ambient temp of 48 degree celsius confirming to ECBC norms, transformer shall be as per IS 1180: 2014 Level 2. The transformer includes comprised of the following:- (a) One cable box on LT side (Secondaryside ) consisting of four Nos porcelain bushing with copper rods, complete with nuts and washers, with one Nos cable glands suitable for reception/taking out of 185 sqmm 3.5 core LT 1100 volts grade XLPE insulated and PVC sheathed heavy duty armourd cables including gland, joint and jointing materials complete.

(b) Oil conservator with fiter type drain valve and oil level guage. (c) De-hydrating breatherwith first fill delhydrating agent (silica gel). (d) Explosive vent. (e) Thermometer pocket on tank cover. (f) One No 100 mm dia, dial type thermometer, vapour pressure type, having range 0-100 degree celsius with metal guard having maximum perimeter reading temperature indicator with re-setting device. (g) Two earthing terminals on tank cover to facilitate fixing of 32 x 6 mm galvanised iron earth strip for earthing of neutral & body. (j) Rating plate and terminal marking plate. (k) Oil level gauge. (l) Oil drain filler valve. (m) Lifting lugs. (n) Oil filing hole with cap/plug with connecting plate complete. (o) Air release valve plug (p) Four plain solid cast steel detachable rollers. (q) Extra bushing for neutral in the LT cable box of providing independent rate of earthing for neutral. (r) First filling of new and unused transformer oil IS-335 marked (Make Savita/Power Link) filtered and tested upto 40 KV dielectric strength at 2.5 mm air gap between testing electrodes. Note :- (i)Unit rate quoted shall be deemed to include for PCC Suitable size platform for mounting of the transformer. (ii) Certification of di-electric strength shall be submitted by the contractor after filling the oil.

S &F UPS for 30 minute backup single phase AC input 160 to 260 V and output 230 +1 of capacity 2 KVA complete all as specified and directed.

SMOKE DETECTOR / FIRE DETECTOR AND ALARM SYSTEM

Supplying and drawing 2 core. 1.5 sq mm flame retardent low smoke. PVC inulated unsheathed flexible bright annealed coper conductor cable. 1100 volts grade drawn through in the surface / concealed conduit as required wiring with 2 core X1.5 sqmm FRLS PVC sheathed copper conductor cable.

Supply and fix detectors complying with and type certified to EN-45 addressable type multisensor detectors with heat and smoke combination photoelectric /optical with base with self built intelligence as per IS : 11360 complete all as specified and directed.

S&F remote response indicator complete all as specified and directed.

S&F Addressable manual call point glass type complete all as specified and directed.

S&F short circuit isolator complete as required complete all as specified and directed.

Supply, install testing and commissioning main fire alarm control panel, cubical type, totally enclosed, fully compartmentalized, suitable for Single loop complete with power supply, battery charger. Panel meter (S) to indicate AC volts battery charging & discharging currents, PA system comprisig of 12 way PA with ALL CALL. provision of ALERT/EVACUATE/SPEECH facility, 1x250W amplifier, goose neck microphone, 2x12Vx42 AH capacity SMF battery, 12 lines master, intercom unit for talk back system operating on 12 V. D C and all other accessories all prewired as per IS-2189 and IS-2175.

Supply, install testing and commissioning fire alarm sounder/ siren electronic type horizontal single stage continuous normal operation for atleast 50 minutes with sound level 65 db to 120 db measured at 1.5 metre with sound output variation +5db 500 metres range sounder complete as specified and directed.

S&F electric siren system. AC 415 V, 50 Hz, including necessary foundation and protection from rain water of DB range 65 to 120 measured at 1.5 mtrs with sound ouput variation of + 5 db for range 2 Kms installed at roof of Bldg including civil work & suitable canopy & neccessary foundation.

FIRE FIGHTING SYSTEM

Supply installation testing and commissioning of ABC type fire Extinguisher capacity 6 kg filled with Mono Ammonium Phosphate powder 50% conforming to IS 14609 power coated MS body stored pressure type Discharge time 18 Sec controllable discharge is 90%, applicable on class A,B &C and electrically started fire. A Rating-3A, Rating 21 B safety pin is of SS material, sheet metal thickness 1.0 mm, Helium leak Detection tested ISI approved IS 15683:2006. 5 years warranty.

Supply installation testing and commissioning of Carbon Dioxide (CO2) type fire exitnguisher capacity 4.5 kg conforming to IS 15683, with ISI marked / TAC approved fitted with required accessories including wall suspension brackets. PESO/CCOE Approved cylinder body and confirms to IS : 7285, high grade Enamel painted externally with PO Red finish, wheel operated controllable discharge high pressurebress valve confirming to IS 3224 which is provided with pressure relief dischargeable and easy to service, non conductive agent for electrical use without risk to operator, CO2 gas disappiears quickly leaving no residue applicable on class B & C and electrically started fire, B rating 21 B started fire. A Rating - 3A, Rating 21B. safety pin is of SS material, sheet metal thickness : 1.0 mm. Helium leak Detection tested ISI approved IS 15683: 2006. 5 years warranty.

COOLING APPLIANCES / COLD WATER SUPPLY

Supply and install testing & commissioning voltage stabilizer for automatic operation, single phase naturally air colled Indoor type copper wound & designed for input variation between 170V to 280 V with output voltage stabilized at 230 V with accuracy of ± 5% and of capacity 5.0 KVA complete all as specified and directed.

Supply, installation and commissioning of refrigerators, electric driven, 230 Volts, (single phase), 50 HZ, having nominal storage capacity 345 ltrs direct cool, Double door Frost free, 5 Star BEE rating, colour as approved by GE.

Supply, installation and commissioning of refrigerators, electric driven, 230 Volts, (single phase), 50 HZ, having nominal storage capacity 192 ltrs direct cool, Single door, 5 Star BEE rating, colour as approved by GE.

Supply and lay CPVC pipe for Hot Water Supply of size 15 mm bore including all type necessary fittings, clamps etc on wall/ ceiling/floors complete all as specified and directed.

Supply and lay CPVC pipe Hot Water Supply of size 20 mm bore including all type necessary fittings, clamps etc on wall/ ceiling/floors complete all as specified and directed .

Supply and Fix CPVC Spears Ball Valve Hot Water Supply of size 15 mm bore complete all as specified and directed.

Supply and Fix CPVC Spears Ball Valve Hot Water Supply of size 20 mm bore complete all as specified and directed.

Supply and Installation of Solar water heating system ,Flat Plate collector type ,indirect heat transfer typewith heat exchanger of 300 litre per day capacity ,with 4.0 kw electrical heating back up. Make :- Tata BP Solar System/ M/s RACOLD RHERNO LTD PUNE/ M/s BOSCH LTD BANGALORE

Supply and install hi wall split units indoor/outdoor inverter type complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimm 5 star rating and EER 3.2 of capacity 1.5 TR complete all as specified and directed.

Supply and install hi wall split units indoor/ outdoor inverter type complete with cordless remote control unit and with cooling and heating function of capacity 2.00 TR in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 complete all as specified and directed.

Supply installed and commissioning of water cooler electric driven (Single phase), having approx storage capacity of 80 litres and nominal cooling capacity of 40 ltr per hour with fully stainless steel body complete all as specified and directed.

Suppy, install, testing and commissioning of passenger elevator with AC variable voltage, variable frequency control, Automatic centre opening, sliding steel doors, all as specified below of model PWl08/10-19 of Kone Elevator or equivalent model in MAKE specified in Appendix 'B'. Type of lift : Passenger lift for 8 passengers (for G+ 03 floor) Load : 560 kg Speed : 1.0 m / Sec Power : 400 V (-) 15% + 10%. 3 Phase 50 Hz Type of control : AC variable voltage variable frequency (with close Loop). Stop and opening : 4 stops & 4 openig (all opening in same side side ) Machine : Gearless traction machine place directly above hoist way in machine room. Machine Room : located above the hoist way. Car Size : 1100 mm wide x 1300 mm deep x 2200 mm high inside dimension. Cars door : Two panel centre opening plain panel. Car Enclosure : All stainless steel panels in vandal proof textured finish milkyway. Car Panels : All stainless steel panels in vandal proof textured finish AISUI441. False ceiling : Full ceiling of powder coated frame & panel with elegantly plain Pyramid Lighting LED down lights. Car : Entrance : Procetected by centre opening sliding stainless steel doors in vandal proof textured finish of size 800 mm wide x 2000 mm high.

Door operation : Automatic with ACVVVF door with electronic door protection device. Hand railing on three sides : Round bend Handrail painted Traffic Black at Real wall mirror stainless steel finish Car and counter : Guide rails of T- Section. Weight Guide : Mild Steel Flooring : Satainless steel chquerred sheet 2.00 mm thick. Signal design type S-60 or equivalent with the following features. (a) Car combined luminous hall button with seven segment digital hall position indicator at all floors (b) Car operating panel 1 full height stainless steel face plate square surface mounted Buttons with braille KDS90. (c) Overload warning indicator. (d) Battery operated alarm bell and emergency light. (e) Fireman's switch. (f) Automatic rescue device with maintenance free batteries. (g) Voice synthesizer. (h) Intercom (j) Sixteen segment LCD type panel car position indicator in car. (k) Provision of suitable lighting and cabin fan inside the car. (l) Face plate finish : Stainless steel in hair line finish. (m) Face plate shape : Rectangular. (n) Emergency operation of lift by manual device by automatic rescue device (ARD)

(o) 3 D infrared sensor (4 Nos) on each in car, M/C room and near ground floor, landing door all as per IS 14665. (q) Automatic Manual and dual control system. (r) Landing door finish : Stainless steel AISI441. (s) Landing Signalizatrion : Stainless steel 7 segament display surface mounted with braille KDS90. Location : Ajay Meru complex. Travel length : 09 mtr (Approx). Standard : Car Emergency light fireman drive curtain of light 169 Beams Automatic, closed doors 2 Hr fire rated landing doors. Operation : Emegency Rescue Device 2 Way dedicated intercom Nudging Attendant service pyramid lighting LED. Note : (i) Building works for reference only. These are excluding from scope of work herein and shall be constructed as part of civil works in the building of schedule 'A' Part I . Machine room : 4000x4300 mm Lift well : 1800x1700 mm (upto full height) Pit depth : 1400 mm OH : 4250 mm.

RO WATER SUPPLY

Supply and installed 25 LPH commercial UV+RO water purifier plant 25 ltr per hour stainless with auto shut off having specifications :- (i) Ultra violet lamp: Ultra violet rays causing immediate death for organisms and wipe out there ability to survive and reproduce. (ii) Auto shut off : with fully automatic shut off system when its water storage tank gets full. (iii) Purification capasity : Up to 25 ltr per hour. (iv) Applications : Suitable for purification of brackish / tap water/ muncipal corporation water supply. (v) Body Material : full stainless steel with ABS Food grade plastic mounting filter assembly. (vi) Power comsumption : 60W. (vii) Membrane type : thin film composite RO (TWO). (viii) Booster pump : 150 GPD (copper winded pump) 02 Pcs membrane. (ix) RO water purifier system which run up to 1600 TDS level Note : RO WATER Purifier plant have minimum 2 years warranty

M/S MAMTA CONSTRUCTIONS