CONSTRUCTION / EXPANSION OF POWDER GODOWN IN COURT YARD , SCRAP SHED, EXTERNAL TOILET AND OTHER WORKS IN NHMPP PLANT AT KANNAMANGALA VILLAGE, CHANNAPATNA TALUK BENGALURU SOUTH DIST

CONSTRUCTION / EXPANSION OF POWDER GODOWN IN COURT YARD , SCRAP SHED, EXTERNAL TOILET AND OTHER WORKS IN NHMPP PLANT AT KANNAMANGALA VILLAGE, CHANNAPATNA TALUK BENGALURU SOUTH DIST

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 1.5m as per ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Above 3.60m to 6.60m Level

Providing and laying in position Reinforced/ Plain cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m t...

Above 3.60m to 6.60m Level

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Above 3.60m to 6.60m Level

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Above 3.60m to 6.60m Level

do-- for Lintel / Tie Beam with M-25

0.00m to 3.60m Level

Above 3.60m to 6.60m Level

do-- for Chejja with M-25.

0.00m to 3.60m Level

Above 3.60m to 6.60m Level

Providing Thermo-Mechanically Treated bars of grade Fe-500 / 550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to a...

Above 3.60m to 6.60m Level

Providing and constructing granite / trap / basalt size stone masonry with hard stone in foundation & plinth in cement mortar 1:6, stones in courses not less than 20 cms high, bond stones at two m. ap...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Above 3.60m to 6.60m Level

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

Above 3.60m to 6.60m Level

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Above 3.60m to 6.60m Level

Providing & fixing SS fly proof wire gauze to windows, clerestory windows & doors to exsisting aluminium frame. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both si...

Above 3.60m to 6.60m Level

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Above 3.60m to 6.60m Level

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Above 3.60m to 6.60m Level

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...

Providing and laying machine cut & 30mm thick Sand Blasted / Flamed Rajashree red / Irkal Pink approved Granite stone slab flooring in required design and patterns, in linear as well as curvilinear po...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

do -- In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile

0.00m to 3.60m Level

Above 3.60m to 6.60m Level

Grouting the joints of flooring tiles having joints of 5 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...

Providing and laying Ceramic glazed / Antiskid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and...

Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths / Paving Concrete using 1 cement : 2 coarse sand : 4 graded stone aggregate ...

Providing and laying 60mm thick factory made precast M - 30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, lai...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Above 3.60m to 6.60m Level

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Above 3.60m to 6.60m Level

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...

Above 3.60m to 6.60m Level

Painting wood / Masonry work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufactu...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Providing and fixing Steel work in built up tubular trusses (round, square or rectangular hollow tubes etc.) etc., including cutting, hoisting, fixing in position and applying a priming coat of appro...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Providing, fabricating and fixing Profiled Poly Urethane insulated Roof(PUF Sheet) having modular density 40kg/m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel...

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

do -- For PPGI Sheet Cladding

0.00m to 3.60m Level

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers com...

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns ep...

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns ep...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and fixing Aluminium Turbo ventilator complete as per technical specifications : Non Power Driven with 1.3mm thickness and 38 No.s of Vanes & turbine doom thickness 1mm and total weight not ...

Providing and injecting chemical emulsion for Preconstructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top...

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) with C.I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete s...

Dismantling tile work in floors / dadoing and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. : For thickness of tiles ...

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as a...

B SANITARY & PLUMBING WORKS :

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. f...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 g.

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge

Providing and fixing CI / PVC Nahani trap of approved make conforming to ISI specifications and construction of Cistern in CC 1:2:4 as per directions (Rate is inclusive of cost of materials and fixtur...

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

P/F. UPVC or equivalant approved make Pipes (Supreme or equivalent make) with malleable G.I. 'R' brand specials such as tee, bend, elbow, socket, reducing sockets, union, collers etc. as required incl...

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : a) 25 mm nominal bore

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...

Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct...

b) 110mm nominal dia pipes

c) 150mm nominal dia pipes

Constructing brick masonry inspection chamber 455x610mm, and 450mm depth, (clear inside dimension) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar ...

Providing and fixing high density polythylene water storage tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making ncessary h...

Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt ...

C ELECTRICAL WORKS :

A - LT PANEL AND MCB DISTRIBUTION BOARDS

DISTRIBUTION BOARDS: Supplying and fixing regular MCB distribution boards on wall/wood board/ flush mounting using required clamps, bolt...

Supplying and fixing of following rating, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.10A, SP MCB

WIRING SYSTEM : Supplying and wiring adopting loop system in suitable size PVC Conduit/casing capping casing capping using2x1.5Sqmm (Phase & Neutral) &1x1.0sqmm (Earthwire)FRLS multistrand PVC insulat...

Medium point above 3 mtrs upto 6 mtrs.

Long point above 6 mtrs upto 10 mtrs.

Two in a row above 3 mts upto 6 mtrs from tapping point to outlet via switch box

Three in a row above 6 mts upto10 mtrs from tapping point to outlet via switch box

Exhaust fan point (Single phase) controlled by 6A modular type switch and 6A socket outlet near the exhaust fan - Medium point above 3 mtrs upto 6 mtrs.

CIRCUIT MAIN / POWER MAIN / SUBMAINS : Supplying and wiring for lighting circuit mains/ power mains/submains, using one of FRLS PVC insulated 1100V grade, multistrand Copper conductor single core cabl...

2 x 2.5 Sqmm + 1 x 1.5 Sq mm PVC Insulated wires drawn in 20 mm dia PVC conduit

2 x 4 Sqmm + 1 x 2.5 Sq mm PVC Insulated wires drawn in 20 mm dia PVC conduit

2 x 6 Sqmm + 1 x 4 Sq mm PVC Insulated wires drawn in 32 mm dia PVC conduit.

4 x 6 Sqmm + 2 x 4 Sq mm PVC Insulated wires drawn in 32 mm dia PVC conduit.

4 x 10 Sqmm + 2 x 6 Sq mm PVC Insulated wires drawn in 40 mm dia PVC conduit.

Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. (Group-A)...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch/ Socket / stepped electronic fan regulator / dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way. Group B

6Amps 3way socket.

16Amps one way switch

6/16Amps universal socket

SUPPLY & INSTALLATION OF LIGHT & FAN FIXTURES:

Supplying of 40 W LED IP-65 Tube Light fixture of type CIS-300-40-57-SL-DP-NGR of CG make/equivalent.

Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI80. Power Input: 220-240V@ 50/60Hz & Power factor 0....

Supplying and fixing of LED Bulk head of 10W with IP65 protection and IK08 impact resistance suitable for surface and wall mounting applications. LBHE-10-CDL of CG make/equivalent.

Fixing all types and all capacities fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wires, ...

Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable for operate on 230V 50Hz, AC Supply.

Supplying of 1440rpm 15" Sweep (450 mm)heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make.

EARTHING SYSTEM : Supplying, fixing and wiring earth electrode for grounding of Lifts, Transformers, DG sets etc., Using 40 mm dia 2.9mm thick 2.5mtrs long GI pipe with GI funnel with mesh and suitab...

Supplying and running of GI strips for grounding connections, using necessary fixing materials as required - 25x3mm GI strip

Supplying and running of GI strips for grounding connections, using necessary fixing materials as required - 8 SWG, GI Wire

600 x 600 x 3 mm GI Plate

Supply and fixing of conduit / structural steel support ceiling suspended type / wall bracket type clamps with necessary saddles for fixing of conduits / cables, cable trays and where ever necessary. ...