14/EE(E)BM-II/2020-21(2ND CALL)

Amount

Painting brush 75mm size must be wooden handle (Make: Metro / Eagle/ Dabar/ Rajdut )

Painting brush 50mm size must be wooden handle(Make: Metro / Eagle/ Dabar/ Rajdut)

Gun metal bushes for Desert Coolers motor(as per sample)

Shaft for 1/7 HP Desert Coolers motor (as per sample)

GI nut & bolt with washer, size 3/ 4” x 1/4” (as per sample)

PVC Albo ½” (as per sample)

PVC distributor ½” (as per sample)

GI wire mesh for pad set size 1”x 1” the wire should be made of 13 SWG wire. (as per sample)

Rivit for fixing bushes of Desert Cooler motor (as per sample)

MS Cap ( as per sample) for motor

Ring for Desert Coolers motors with nut bolt (as per sample)

GI Nut Bolt 1.5" (as per sample)

Sand paper ( 60 No.) (as per sample)

MS Clamp for holding of 1/4 HP motor with rubber washer (as per sample)

GI Nut Bolt 2" (as per sample)

Electric welding rod 10 SWG ( Make – Victor/555) (Each pkt 100 Nos.) or ISI marked

Hack Saw blade 2-way Make:- Super power/ Miranda/ Engineer

MS fan blade for 18” desert cooler, 24 SWG (As per sample)

MS fan blade for 15” desert cooler, 24 SWG (As per sample)

Submersible pump for desert Cooler Make:- GE/Khaitan/ Pioneer

Brass Bristle brushes 1.5” Short handle ( as per sample)

PVC Connection 24”x1/2” with brass nuts nickel coated along with rubber washer. ( as per sample)

GI nipple 3”x1/2” ( Make Unik/ AKG/JINDAL)

GI nipple 4”x1/2” long thread ( Make Unik/ AKG/ JINDAL)

Relay for ACs and water cooler 1.5 TR (as per sample)

Over load for fridges 1/6, 1/8 HP (as per sample)

Packing tape 50mm thick (Each roll 10 Mtr ) (As per sample)

Insulation tube ¼ inch dia, wall thickness 9mm or more (Each roll 2 Mtr) (As per sample)

Insulation tube 3/8 inch dia, wall thickness 9mm or more (Each roll 2 Mtr) (As per sample)

Insulation tube 5/8 inch dia, wall thickness 9mm or more (Each roll 2 Mtr) (As per sample)

Neon Tester Make:- Taparia/Everest/ egerton

Red oxide Make: Burger/ Asian/ Narolac

Tarpin oil Make: Sun Brand/ 777/ Crown

MS Dead plug ½” dia (As per sample)

Industrial metal plug top 20 Amp (As per sample)

Painting brush 100mm size, must be wooden handle Make:- Metro/Rajdut/ Eagle/ Dabar

Thermostate for water cooler (As per sample)

Teak wood ply 3mm thick (As per sample)

Wooden piece 2”x2” (As per sample)

Wood wool pad set 15” size of Desert Coolers 18”x24” (3 Nos. in per set) 450x600 mm. (as per sample)

Wood wool pad set for 20” size of Desert Coolers 24”x32” 3 Nos. each set (600x800 mm.) (as per sample)

PVC flexible copper wire 3 core, 23/.0076 (each coil 90 mtr) 1100 volt, 50 HZ ( make: Plaza / Kalinga / Emperor )

Stud with nut bolt for 1/4 HP motor of Desert Cooler (as per sample)

PVC pipe size ¾” 30 Mtr. Each roll. (as per sample)

Star washer for 1/4 HP motor (as per sample)

Namda for desert cooler motor (as per sample)

Fibre washer for desert cooler motor (as per sample)

GI spring of motor (as per sample)

M- seal , small size( weight 75 gm)

white cotton Duster, size 21"x21" (as per sample)

Capacitor 36 microfarad ( Make: Asian/ Epcos / Tibcon)±5%, 400v, 50HZ, AC, maximum tempeture 85º C (As per sample)

Nylon Bristle brushes 1.5” Short handle ( as per sample)

Nylon Bristle brushes 1.5” long handle ( as per sample)

Nylon Brush PVC 50 mm ( as per sample)

Nylon Brush PVC 25 mm ( as per sample)

Chemical oil for Acs servicing ( as per sample)

Fan blade of out door unit of Acs ( as per sample)

Fan blade of water coolers ( as per sample)

Bush for indoor unit of Split Acs (as per sample)

Backalite sheet 9"x 6" ( as per sample)

PVC Flexible copper wire 0.75 sq.mm size, 2 Core, F.R PVC insulated unsheathed with bare copper conductor 1100V, 50 HZ, duly ISI Marked. (Make: Phenolic /Havell’s/Kalinga Premium ) (100 mtr each coil)

Socket 20 AMP for metal top (As per sample)

Pressure pump capacity 1/2 hp for servicing of Acs with nozzle, Make:- Hittachi / Carrier/ LG

Spray bottle 2 Ltr capacity ( as per sample)

Compact ball bearing 6201 Make:- SKF/ NBC/TATA

Compact ball bearing 6202 Make:- SKF/ NBC/ TATA

PVC Connection 36”x1/2” with brass nuts nickel coated along with rubber washer. ( as per sample)

Flexible PVC pipe ½” dia( Each Roll 30 mtr) (As per sample)

Old Dhoti (as per sample )

VIM powder (Make:- Fana, Tide, Wheel)

Teflon plastic tape size 50 mm thick (Each roll 10 mtrs) (As per sample) Make:- Mseal

Black paint Make: Burger/ Asian/ Narolac

Drill bitt 3.2 mm dia for metal (Make:- JK/ TT)

Drill bitt 4 mm dia for metal (Make:- JK/ TT)

PVC tap ½ “ dia Make :- Parag/ AKG / Satiya

PVC flexible pipe 1” dia (Each roll 30 mtr) (As per sample)

Angle Iron 25X25X3MM duly ISI marked

Angle Iron 35X35X5MM duly ISI marked

Angle Iron 40X40X5 MM duly ISI marked

G.I Sheet 20 SWG (1 Mtr x 2.5 Mtr)

Make:- Bhushan/ TATA / Makhan

G.I Sheet 22 SWG (1 Mtr x 2.5 Mtr)

Make:- Bhushan/ TATA / Makhan

Flat Iron 25x4mm (1") duly ISI marked

Capacitor 4 microfarad ( Make: Asian/ Epcos / Tibcon)±5% 400 Volt , 50HZ, AC, maximum tempeture 85º C

Capacitor 50 microfarad ( Make: Asian/ Epcos / Tibcon)±5% 400 Volt , 50HZ, AC, maximum tempeture 85º C

Wooden screw 1.5" size, Make:- Laxmi

Steel screw size no. 8X13, (Each packet 1000 Nos.) Make:- Laxmi

Steel screw size no. 10X13 , (Each packet 1000 Nos.) Make:- Laxmi

Steel screw size no. 10X25 (Each packet 1000 Nos.) Make:- Laxmi

DUNKAL ELECTRONICS