Work to replace damage 33 KV line weasel conductor by dog conductor of 33 KV S/S Bagwala and to replace damage VCB by new VCB of 33 KV S/S Isoali under business plan.

Amount

Safe carriage of 11 mtr. STP from store center Etah/nearest 33/11 KV S/S to direct pit site in distance range 0 to 60 Km. including loading & unloading at both ends.

Safe carriage of line material from store center Etah/nearest substation to pit site in distance range 0 to 60 Km. including loading & unloading at both ends.

Dismantling and removal of existing ACSR Weasel conductor from the various area, stacking and placement their coils and their in the safer place including cost of lobour T&P etc. required for proper completion of work.

Laying stringing & sagging of 3 phase 3 wire Dog condudctor including binding & nozzling.

Errection of 11 mtr.STP as single support including fixing of all HT line accessories etc. complete as per DVVNL/RESPO normes.

Re-sagging of loose conductor of 33 KV HT line after opening, binding, nozzling etc.

Straighting of tilted PCC/R.S. Joist poles/round pole of HT line after openeing of nozzling, digging of pit applying anti direction force for making of proper alignment of line.

Replacement of following broken/damaged/missing accessories by new accessories including opening of the same and refixing.

1- 33 KV cross arm.

2- 33 KV cross arm clamp.

3- 33 KV pin insulator.

4- 33 KV pin with nut.

5- 33 KV F Clamp

6- 33 KV Disc Insulator.

7- 33 KV Discfitting.

Carriage of old material from pit site to JE store/store center, Etah in distance range 0 to 60 km including loading & unloading and proper stacking.

Safe carriage of 11 KV switchgear from Store Center Etah to different sites (33/11 KV S/S) in dist range 0 to 60 Km including loading & unloading at both ends.

Breaking of earthing opening of bolt & nut, removal of 33/11 KV old switchgear, existing at 33 KVS/S incoming/outgoing.

Shifting old switchgear from control room of 33/11 KV S/S out side at safer side.

Shifting carefully and safely 11 KV switchgear form out side to inside in Control Room of 33/11 S/S.

Installation of New 11 KV Incoming/Outgoing switchgear including with grouting & fixing nut & bolts connection with all cost of labour T&P and required material for proper completion of work but excluding cost of switchgear. Bacume circuit breaker will be provided by the department.

Fixing & making of bus bar connections between all switchgears after clearing and taping with HT Tape properly.

Making the earthing of new installed switchgears with earthing strip by welding & other access. Etc (Earthing strip will be provided by the contractor.)

Safe carriage of damaged switchgears from different S/S to Store Center Etah in distance range 0 to 60 Km. including loading & unloading at both ends.

M/S Kamaruddin Electricals