Construction of Community Hall Building at Vanapadi ADC H/O Vanapadi Panchayat in Walajah Block

Amount

Earth work Excavation for Foundation in all classes of soils and sub soil to full Depth except in hard rock requiring blasting but inclusive of shoring strutting if required for the sides of foundation

Filling with river sand including cost and conveyance of all materials to work site and all labour charges etc

CC 1:4:8 MIX USING 40mm HBG metal including cost and conveyance and all labour charges and materials charges etc.,

Supply and fabrication of steel including cost and conveyance and alla labour charges etc. complete.

Reinforced Cement concrete 1:1.5:3 mix using 20mm ISS Metal including cost and conveyance of all materials to site all labour charges for mixing, laying, and curing etc complete

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. Grade beam

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. Column

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. Main building

Brick work in CM 1:5 mix using country bricks including cost and conveyance and all labour charges etc.

Rolling Shutters ( with ISI MONOGRAM) including cost and conveyance of all labour charges etc completed.,

Supply and fixing for girl work including cost and conveyance of all labour Charges etc completed .,

Supplying and fixing UPVC ( UN - Plasticized poluvinyl chloride) windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm the EPDM rubber (black colour) covered with over all the edges of frame and shutter will be provided with Espag multi power point locks and also it operates as handle. the corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable

Supplying and fixing UPVC ( UN - Plasticized poluvinyl chloride) windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm the EPDM rubber (black colour) covered with over all the edges of frame and shutter will be provided with Espag multi power point locks and also it operates as handle. the corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable

Labour Charges for fixing doors along with frames in position etc complete

Labour Charges for fixing windows along with frames in position etc complete

Weathering coarse Concrete using 20mm Size Broken Brick jelly with in pure Slaked lime over the RCC Roof in the proportion of 32:12 1/2 by volume laid in layer beating the concrete with the wooden batters etc as per standard specifications

Finishing Top of Roof with one Couse of Pressed tiles set in CM 1:3 Mix using tiles of size 23 x 23 x 2

Plastering With Cement Mortor 1:5, 12mm Thick including cost and conveyance and all Labour Charges etc.,

Paving the Floor with best approved quality the polished Kota stone slabs or size 600 x 600 of 18/20mm with machine cut edges and matching marble slab not less than 100mm width other than adanga marbles as border laid over a cement mortar bed of 20mm thick using Cement mortor 1:3 ONE CEMENT AND THREE M.SAND ) fixing the slabs

Colour Wahing Two coats with approved plastic emulsiion paint including cost and conveyance and all labour charges etc., completed

Colour Wahing Two coats with approved Distember paint including cost and conveyance and all labour charges etc., completed

Painting with two coats over new iron work using Synthetic enamel paint including all

Provision for Light Point

Provision For Fan Point

Supply and fixing of 48'' Ceiling fan

Provision for DPTC

Provision for plug point

Supply and ffixing of tube light

Supply and fixing CFL

Supply and run of service Connection wire

Supply and fixing of service board

Supply and Fixing of Bluk Head Fitting

Supply and Fixing of 25mm dia GI Pipe

RGT INFRAA (BID ID -1415584)