Supply and Conversion of C I / C S Casting for The Season 2024-25

Description

Casting, Rough Machinining and Supply of Cast iron mill Roller Scrapper Suitable for 30"X60" mill as per mill drawing approximate weight-270 kgs. Each (i) Fresh Supply

Casting, Rough Machinining and Supply of Cast iron mill Roller Scrapper Suitable for 30"X60" mill as per mill drawing approximate weight-270 kgs. Each (i) On Conversion basis

Casting: Cast Iron Clamp for Boiler, casting charges for new clamp as per drawing/sample. Temp. 1100°C

Casting: Cast Iron clamp on conversion as per drg/sample. Temp. 1100°C

Casting: Channel and brackets for boiler as per drg./sample - casting charges for new channel and brackets Temp. 1100°C

Casting: Channel and brackets for boiler as per drg /sample casting on conversion basis Temp. 1100°C

Casting: C.I. Grate Bar for boiler furnace as per drg,/sample Casting charges for new grate bar temp. 1100°C

Casting - CI door with frams for 20 ton./C.I. mouth Boiler chamber as per drg. Casting on conversion Temp. 1100°C

Casting: CI Mouth piece.Casting/C.I. Door Charges for new CI Mouth piece as per drawing/sample. Temp. 1100°C

Casting: CI Mouth piece and baflle after adjustment of CI scrap including burning losses as per drawing/sampl. Temp. 1100°C

Casting: CI Elephant Ear for 20 ton Boiler Furnace after adjustment of CI scrap including burning losses as per drawing/sampl. Temp. 1350°C

Phosposons bronze worm wheel and cast steel worm shaft for FSM 8" (U.800) 15:1 Reduction Gaar box.

Ph bronze worm wheel for R.G. Box size 6" CRS ratio 20:1 as per drg./sample

Ph bronze worm wheel complete and C.S. worm Shaft for R.G.Box size U-500 ratio 20:1

Ph bronze worm wheel complete and C.S. worm Shaft for R.G. Box size U-600 ratio 20:1

Ph bronze worm wheel complete and C.S. worm Shaftfor R.G. Box size U-700 ratio 20:1

Ph bronze worm wheel complete and C.S. worm Shaft for R.G. Box size U-800 Ratio 20:1

Ph bronze worm wheel Complete and C.S. worm Shaftfor R.G. Box size V-500 ratio 20:1

Ph bronze worm wheel Complete and C.S. worm Shaft R.G. Box size V - 600 ratio 20:1

Ph bronze worm wheel Complete R.G, Box size V - 700 ratio 20:1

Pinion for Cane Unloader - material EN-24 No. of teeth 20 dia 141mm,face width 98mm, bore 50mm

Pinion for Cane Unloader - material EN-24 No. of teeth 18 dia 200mm,face width 100mm, bore 30mm

Pinion for Cane cane unloader - material EN-24 No. of teeth 18, dia 160mm,face width 125mm, bore 45mm,

Pinion for Cane Unloader - material EN-24 No. of teeth 18 dia 160mm,face width 122mm, bore 45mm

Pinion for Cane unloader - material EN-24 No. of teeth 24 dia 165mm, face width 82mm, bore 50mm

Pinion for Cane unloader - material EN-24 No. of teeth 17 dia 114mm, face width 65mm, bore 40mm

Pinion for Cane Unloader - material EN-24 no. of teeth 22, dia 145mm, face width 65mm, bore 50mm.

Ph Bronz worm wheel and EN-9 worm shaft for R.G. Box Size V-335 as per drg./sample

Ph Bronz worm wheel and EN-8 worm shaftfor R.G. Box Size U-1200 as per drg./sample

Ph Bronz worm wheel and EN-8 worm shaft for R.G. Box Size U-1400 as per drg./sample

CS Gear No of teeth - 96 Face width - 120mm, PCD -1219.2mm, Module -12.7 dedendum - 14.694,PR Angle -20degree for cane carrier drive as per drg.

CS Pinion No of teeth - 20 Face width - 120mm, PCD -254mm, Module -12.7 dedendum - 14.694,PR Angle -20degree for cane carrier drive as per drg.

Willman Bibby coupling Code No. 318 Standard type with pilot bore 50mm specification 318A/50-18

Bagasse Feed Hopper (C.I. Piece for bagasse Feeder IJT Bottom single coller asper drg.No. ASR/Boiler FH2/34/8 on conversion basis.

C.I.Clamp for IJT Boiler one conversion basis As per drawing No. ASR/Boiler IJT/130606

C.I.Hanger for IJT Boiler (Elephant Ear Arh Type)on conversion basis Drg. No.ASR/Boiler/ IJT/10/06

C.I.Lock on conversion basis

C.I.Hanger (Beam) as per our drawing on conversion basis

Cast Steel Crown Pinion for Mill Size -30"x60 New Material IS1030

Cast Steel Crown Pinion for Mill Size -30"x60 New Material is IS2708

Cast Steel Crown Pinion for Mill Size-30"x60" on conversion basis IS1030

Cast Steel Crown Pinion for Mill Size-30"x60" on conversion basis IS1030 IS2708

Cast steel Crown Pinion for Mill Size Profiles Teeth Cutting / Machining charges

Cast stel Trash Plate for Mill Size-30"x60" New Material IS1030

Cast steel Trash Plate for Mill Size-30"x60" New Material IS1030 wear resistance quality

Cast steel Trash Plate for Mill Size-30"x60" New Material IS2708

Cast steel Trash Plate for Mill Size-30"x60" New Material IS2708 wear resistance quality

Cast Steel Trash Plate for Mill Size-30"x60"on conversion basis IS2708

Cast Steel Trash Plate for Mill Size-30"x60" Machining Charges

KRISHI UDYOG SHALA

SHREE RAJENDRA UDYOG