REPAIR TO ROOF CEILING, RWP, PLINTH PROTECTION, FLOORING AND OTHER CONNECTED WORKS UNDER AGE B/R-I OF GE PANAGARH

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar fcings, dressed stone work and precast concrete and removing and rubbish off the premises (outside MD land) complete all as specified and as directed.

M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius build in CM 1:6 complete all as specified and as directed.

All as per item No. 2 above but except bricks complete all as specified and as directed.

M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius in half bricks thick build in CM 1:4 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL complete all as specified and as directed.

M & L for hardcore of broken bricks of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor tiles complete all as specified and as directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in plinth protection and paving complete all as specified and as directed.

Demolation of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises complete all as specified and as directed.

M&L for coloured non skid ceramic joint free tiles 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed with white /colour cement complete all as specified and as directed.

M & L glazed ceramic colour tiles 300 x 200 x 7 mm thick in vertical surfaces such as risers, skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match brick or concrete surfaces complete all as specified and as directed.

M&L for coloured non skid ceramic tiles (joint free) 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors or skirting etc set and jointed in neat cement slurry and pointed in white or coloured cment to match complete all as specified and as directed.

M&L for coloured vitrified ceramic tiles (joint free) 10 mm thick (Square/Rectangular) area of each tile exceeding 0.36 sqm in floor area, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

M&L 15 mm thick screed bed or bedding layer in mortar 1:6 for laying floor finishes and pointed in white or coloured cment to match complete all as specified and as directed.

M&L 10 mm thick screed bed or bedding layer in mortar 1:4 for laying floor finishes and pointed in white or coloured cment to match complete all as specified and as directed.

Rendering dubbing coat over damaged irregular surface of chajjas roof projections ceiling facia etc average 15mm thick in cm 1:4 over cement sturry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even & smooth incl making of drip course as reqd complete including roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and as directed. Note : Rate for form work if reqd to be included in the rate quaoted by the contractor.

Material and labour for 25 mm thick chequered cement concrete tiles of approved size, set, jointed and pointed using with grey cement and pigment in floors, paving etc. including the setting and jointing in neat cement paste or slurry 0.3kg/Sqm complete as per manufacturer instructions and direction complete all as specified and as directed.

Dismantling of stone slub and tiles of any description or thickness in floor complete all as specified and as directed.

M&L 20 mm thick black granite machine cut bedding and jointed with gray cement slurry including polishing and half round edges complete all as directed and specified.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for rendering 15 mm thick cement plaster in CM 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster in CM 1:4 on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 20 mm thick cement plaster in two coats (each coat shall be 10 mm thick) on external surfaces of brick work in CM 1:4 and second coat to be applied with WPC and recrone polyster fibre including fair finishing complete all as specified and as directed. (WPC & Recron polyster fibre will be measured and paid separately).

M&L for rendering 5 mm thick cement plaster in CM 1:3 on concrete surfaces as in ceiling, chhajja, shelves etc to match with existing surfaces including finishing even and smooth without using extra cement complete all as specified and as directed.

M&L Preparation of new plastered surface of wall applying of two coats of cement base paint over a coat alkali resistant primer complete all as specified and as directed.

M&L Preparation of new plastered surface of wall applying two coat of OBD,with one coat of primer over a coat of wall care putty complete all as specified and as directed.

M&L Preparation of old plastered surface of wall applying one coar of OBD complete all as specified and as directed.

M&L prepration of old plastered surface of wall and applying one coat of OBD with a coat of primer over a coat of 3mm thick wall care putty complete all as specified and as directed.

M&L Preparation of new plastered surface of ceilling applying three coat white wash complete all as specified and as directed.

M&L Preparation of old plastered surface of ceilling applying two coat white wash complete all as specified and as directed.

M&L preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed. Make:-Asian/ Berger

M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. Make:-Asian/ Berger

S & F Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partitions as per sample. The over all size 900x600mm fixed with steel fastners or steel screw complete all as per sample kept in AGE B/R ‘A’ office complete all as specified and as directed. ( Make : Nirali/Neel Kanth/jainco)

S&F in repair MS.PVC caoted dropery rods of 25 mm dia of PVC coated in curtain rods complete all as specified and as directed.

S & F MS PVC sheeted/power coated bracket size 150mm made to shape suitable for holding curtain/dropery of rod of 25mm dia fixed with PVC rawl plugs and MS steel screws complete all as directed by Engr-in-Charge and as per approved sample kept in AGE B/R 1 office for single/double rod system complete all as specified and as directed.

S & F for coloured conical end balls dia not less then 50mm and PVC coated made to shape suitable for fixing as end of curtain/dropery rods complete all as directed Engr-in-Charge and as per approved sample kept in AGE B/R 1 office.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost ) complete all as specified and as directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and as directed.

Taking down wooden shutter exc 1.00 Sqm but not exc 2.00 each and removing to store complete all as specified and as directed.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and as directed.

S&F factory made 35 mm thick 2nd class H. W. plain framed panelled shutters (three panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per ISI 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 2nd class hard wood 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, etc sizes of members of shutters as specified in SSR Part - I, section - 8, clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed.

S&F 2nd class hard wood 30mm thick glazed and skelton window shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, etc sizes of members of shutters as specified in SSR Part - I, section - 8, clause 8.24 (b), supplied and fitted to chowkhats complete all as specified and as directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

M&L framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 290.Gde-E-165 complete all as specified and as directed.

S & F steel ventilators with centre hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick (Stiles), with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face and 2 mm plain color PVC sheet on back face supply and fixing in frame at site as per specification and drawing complete all as specified and as directed.

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F butt hinges 100 mm of size extruded aluminium allay with galvanised hinge pin complete all as specified and directed.

S&F aluminium handle 100 mm size anodised complete all as specified and directed.

S&F aluminium tower bolts 150 mm long complete all as specified and directed.

S & F 150mm long brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts complete all as specified.

S & F extruded brass handles, fabricated type polished of size 150mm, complete all as specified .

S & F for butt hinges cast brass, with mild steel hinge pin, bright polished and fixed size 100mm long complete all as specified .

S&F aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L PCC (1:2:4) type B-0 as in bed blocks for hold fast including necesssary formwork complete all as specified and directed.

S & F mild steel flat iron as in hold fast, clamps articles conforming to FE 290 Gde-E-165 complete all as specified and directed.

S & F 2 nd class hard wood small fittings such as door and window stops and cleats including all necessary articles exceeding 200 cu cm and n. exc. 500 cu. cm each complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.50 sqm in each pane complete all as specified and directed.

S&F 3mm thick figured glass pin headed type and glazing with oil putty in square n.exc. 0.50 sqm each pane complete all as specified and directed.

Removal of complete existing treatment of any description on roof surfaces/walls/parapets of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items complete all as specified and directed.

M & L for 50 mm thick average PCC 1:2:4 type B-1 (20 mm graded aggregate) for grading in roof complete all as specified and direced.

M&L for rendering 5mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar 1:4 with WPC complete all as specified & directed. (WPC will be measured and paid separately).

Supply only lequied water proofing compound complete all as specified and directed.

M&L PCC(1:3:6) type B-1 (using 20mm graded aggregate) as in roof kerbs or mud stop rounded complete all as specified and directed.

M& L single component, solvent free, cold applied, polyurethane modified, elastomeric waterproofing membrane (Berger make HS PU Roofkoat) with excellant UV resistant capacity, Non-toxic with high SRI Index. It is applied in two coats along with a primer coat and reinforced with 20 gms Geotextile Fleece. It is Eco friendly and low Voc material. The product complies with the requirement a laid out in ASTMD 6083-97a and applied by authorised applicator complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore complete all as specified and directed.

Fixing only in steel tubing and connection 15 mm dia bore complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore complete all as specified and directed.

Fixing only in steel tubing and connection 20 mm dia bore complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth complete all as specified and directed.

S & F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm complete all as specified and directed.

S & F in repair sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410 mm x 330mm x 160mm complete all as specified and directed.

S & F in repair PVC waste pipe 32mm dia for wash basin and sink 01 to02 meter long as per requred complete all as specified and directed.

S&F in repair 15 mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or but-ter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair PVC connection 15mm size PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair grating square/round 150mm size of PTMT (minimum weight 100 gms) complete all as specified and directed.

S&F in repair 15 mm bore stop valve cast copper alloy fancy type, chromium plated with long sunk and cup, screwed down, high pressure, with crutch or but-ter fly handle, screwed both ends for iron pipe or for unions (concealed type) complete all as specified and directed.

S&F in repair 10 litre capacity PVC valveless, syphonic action type low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (With brackets) complete all as specified and directed. Make:- Hindware, Parryware, Commander (Slim Line).

S&F in repair bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair vitreous china squatting pan of pattern 'Orrisa' size 580 x 440mm white with integral foot rests including connection to trap and to flushin pipe, antisyphonage pipe ect complete including making good to existing (floor / Tiles) complete all as specified and directed.(Make :- HINDWARE / Parryware)

S&F in repair Vitreous china Water closet (pedestal pattern) com plete including provision of lime concrete bedding white, including plastic WC seat cover, closed pattern with flat bottom and mild steel CP hinging device and incl CP jet nozzle for EWC including connection to GI pipe line complete all as specified and directed.

S&F vitreous china wash basin white,flat back of size 550x 400mm including 32mm dia PVC waste pipe CP brass wast coupling 32 mm dia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long pvc connection with PVC nut and washer complete at sitecomplete all as specified and directed.

S&F in repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.

S&F in repair chromium plated shower rose with without swivel joints, 125mm size including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 32 mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) minimum weight 32mm-45gms) complete all as specified and directed.

S & F in repair 15mm bore Brass CP Mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

Dismantling wrought Iron or mild steel work of any description not otherwise provided complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified and direceted.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

S&F galvanized corrugated mild steel sheeting 0.63 mm thick with two corrugation side lap class VIII fixed with L-type or J-type or cranked hook bolts in roofs complete all as specified and directed.

S&F Pre - Painted galvanized aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick any colour having tensile strength of 550 Mpa as in ridges, hips valley gutter etc fixed with self tapping screws complete all as specified and directed.

Supply & Fix CP health faucet with 1.50 mtr long tube & hook complete all as specified and directed.

Dismantling of wall or ceilling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, of any thickness including cover fillets complete all as specified and directed.

S & F for anodised aluminium snap grid frame work size of grid 605 x 605 mm for false ceiling complete all as specified and directed.

M&L Providing and fixing Gypsum board 12 mm thick in ceilling fixed with screw as per manufacture instruction complete all as specified and directed.

S & F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed.

Taking down steel window/ventelator and refixing at same opening after rectifying/reparing unfunctional/defective parts,using flat iron fillet whereever requred,changing of box type hinge minor parts for easing,adjusting and greasing etc.complete all as specified and as directed

S&F UPVC windows/Venti. are made out of frames section 60X60X2.5mm multi cavity section suitably suitable reinforced by GI and welded in corners and glass can be fixed on aluminum louvred blades.complete all as specified and directed.

S&F in repair brass choromium plated tubular towel rail 20 mm dia with brackets complete all as specified and directed.

S&F Mild steel in repair 300 mm ,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F Powder Coating Anodised aluminium frame(minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

M&L 5.5 mm thk froested Sheet glass, ordinary quality and glazing with brass screws in square exc 0.5 sq. m in each pane complete all as specified as directed

S&F Powder Coating Anodised aluminium door (side hung /sliding type) shutters(minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F Powder Coating Anodised aluminium window and ventilator shutters side hung type without sash,(minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 nos) hinges type B-21 100mm long (2 nos) suitable handle (1 nos) complete all as specified and directed.

Demolition and breaking up drain pipes or any description set in cement mortar (internal dia of pipe upto 110 mm) dia, complete all as specifed and as directed by the Engr-in-Charge.

S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm PVC (SWR) bends complete all as specified and directed.

S&F 110mm PVC (SWR) bends.

S&F 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete.

S&F in repairs, door closer aluminium body, hydraulically regulated, designation No. 2, universal type, suitable for door shutters and weight between 61 to 80 kg and fixed complete all as specified and as directed by Engr-in-Charge.

S&F in repairs, floor door stopper 140 mm of aluminium alloy body with rubber shoe and tongue, anodised, with hard drawn steel spring and fixed complete all as specified and as directed by Engr-in-Charge.

S&F in repair mortice lock verticle type 100 mm 4 lever brass fixed in aluminum door complete all as specified and as directed by Engr-in-Charge.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in trenches complete all as specified

Supply and fixing cast iron or mild steel coat hooks, solid body, 175mm to 250mm complete all as specified and directed.

Supply & Fixing in repair stainless steel kitchen plate rack made out of 1.00mm thick stainless steel of size 750 x 600 mm including screws complete all as specified and directed.

SCHEDULE OF CREDIT

M/S BHATTACHARJEE ENTERPRISE

M/S N B SEN CONSTURCTION

Shree Jayam Enterprises

M/S TRIVENI BUILDERS

M/S Dey Construction

MS kesh and co

subash chander bahl

Jaibalaji Enterprise

Anmol Yash S.D. Construction Pvt. Ltd.

SARASWATI ENTERPRISE (INDEX NO CEEC D-81)

ANIMA ENTERPRISE

M/S SWAPAN KUMAR MONDAL