REPAIR TO VARIOUS TYPES OF STEEL FURNITURE INCLUDING PAINTING AND POLISHING TO STEEL AND WOODEN FURNITURE AT MARRIED ACCN AND UNITS UNDER GE NAGROTA

Amount

1) Removal of existing unserviceable/broken wooden/steel/PVC part from furniture article carefully without disturbing the adjoining parts.Supply and fixing new parts as per given specification and drg after tightening the joints by arc/gas welding making every part in-tact including painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted only after making the entire item intact by tightening the joints. 2).Work will be executed inside Barrack Store yard of GE(Nagrota) and at various sites as per requirement. 3).All steel sections shall be as per standard IS . 4).Plywood/MDF shall be BWR grade-AA /exterior grade of approved make/brand and shall confirm to IS-303. 5).All other material to be incorporate in the work shall be of latest IS standard specification. 6).Anti-termite and anti-bug treatment shall be done before polishing the wooden item. 7).Painting shall only be done with spray machine only. 8) Painting will only be carried out after removing/peeling the existing paint by using paint remover.

ALMIRAH LARGE STEEL,FD-67(M)/ 1031

Removing UNSV door shutter carefully by unriveting the hinges,S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge. Complete all as directed and shown on drawing.

Removing UNSV lock from shutters of almirah large steel;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing UNSV handle from almirah steel large ,S&F new 130mm long chromium plated handle to steel shutters ,Complete all as directed and shown on drawing

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots,S&F new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape by welding . Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Spot gas welding

Completely removing all dents from almirah by smooth hammering ,preparing the almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete almirah after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

ALMIRAH LARGE STEEL,FD/E6/MAP/18

Removing UNSV door shutter carefully by unriveting the hinges,S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge. Complete all as directed and shown on drawing.

Removing UNSV lock from shutters of almirah large steel;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing UNSV handle from the almirah steel large ,S&F new 130mm long chromium plated handle to steel shutters ,Complete all as directed and shown on drawing

Removing UNSV lock from internal safe of almirah large steel;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape by welding . Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Spot gas welding

Completely removing all dents from almirah by smooth hammering ,preparing the almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete almirah after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

ALMIRAH STEEL MEDIUM WITH SHELVES,FD-67(M)/1032

Removing UNSV door shutter carefully by unriveting the hinges and S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah medium steel with new 80mm long MS hinges Complete all as directed and shown on drawing.

Removing UNSV lock from shutters of almirah medium steel & S&F new 6 lever lock with duplicate keys Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing UNSV handle from the almirah steel medium & S&F new 130mm long chromium plated handle to steel shutters ,Complete all as directed and shown on drawing

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots,S&F new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Spot gas welding

Completely removing all dents from almirah by smooth hammering ,preparing the almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete almirah after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TABLE OFFICE OFFICER STEEL,FD-1003

Removing UNSV top ;S&F new top of size 1680mmx870mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around duly fixed with adhesive and headless nails . Complete all as directed and shown on drawing.

Removing the existing unservicable /rusted drawer ; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front.. Complete all as directed and shown on drawing.

Removing UNSV lock from drawers and shutters ;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing the old broken PVC shoes from the legs of table,S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom.

Continous gas welding to all broken joints of table in length of 1 cms

Completely removing all dents from table by smooth hammering ,preparing the table by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete table after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TABLE OFFICE CLERK STEEL,FD-84(M)/1004

Removing UNSV top carefully;S&F new top of size 1200mmx610mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing the existing unservicable /rusted drawer ; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front.. Complete all as directed and shown on drawing.

Removing UNSV lock from drawers and shutters ;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.

Removing the old broken PVC shoes from the legs of table ,S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom.

Continous gas welding to all broken joints of table in length of 1 cm

Completely removing all dents from table by smooth hammering ,preparing the table by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete table after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TABLE STEEL 900X900X760MM,FD-1009

Removing UNSV top from table steel carefully;S&F new top of size 900mmx900mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing UNSV leg from the table steel carefully by cutting the welded ends with hand held machine and S&F new leg made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth.

Removing UNSV top rail from the table carefully by cutting the welded ends with hand held machine and supply and fix new rail made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth.

Supply and fix new PVC shoe suitable to leg after removing UNSV shoe complete all as specified, as directed and as shown on drawing.

Completely removing all dents from table by smooth hammering ,preparing the table by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete table after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

LOCKER STEEL,FD-257/1029

Removing UNSV/damaged door shutter carefully by removing the hinges and S&F new shutter made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots and S&F new shlef made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing the existing unserviceable rusted conduit pipe from the side flanges ,S&F new 20mm dia conduit pipe along with side flanges. Complete all as directed and shown on drawing.

Removing UNSV handle from the lockers steel and S&F new 100mm long chromium plated steel handle of ISI marked with riveting to steel shutters ,Complete all as directed and shown on drawing.

Removing the existing unserviceable hasp and staple from locker steel and S&F new hasp and staple of size 75mmx40mm of 3mm thickness with riveting to steel shutters. Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of lockers carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Continous gas welding to all broken joints of table in length of 1 cm

Completely removing all dents from locker by smooth hammering ,preparing the locker by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete locker after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

RACK SHOE STEEL,FD/E6/MAP/02(R)

Removing the existing damaged/rusted legs (U shaped) carefully without damaging the other parts by using hand held cutting machine,S&F new legs (U shaped) made out 25mm dia MS pipe 18 gauge duly welded to its position.Complete all as directed and shown on drawing.

Removing UNSV wire mesh (Jali) shelves, S&F new wire mesh (Jali) shelves made out of 3mm dia MS rods duly welded to its position.Complete all as directed and shown on drawing.

Removing old UNSV shoes,Supply and fix new PVC shoe suitable to each leg .complete all as directed and as shown on drawing.

Continous gas welding to all broken joints of table in length of 1 cm

Completely removing all dents from rack shoe by smooth hammering ,preparing the rack shoe by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete rack shoe after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TEAPOY VERANDAH,FD-35/255

Removing UNSV top from teapoy verandah carefully;S&F new top of size 900mmx450mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing old UNSV shoes,Supply and fix new PVC shoe suitable to each leg .complete all as directed and as shown on drawing.

S&F long stiffener of length 750mm of conduit pipe of 20mm dia of wall thickness 1.6mm welded in between the short siffeners at bottom of teapoy,irrespective of what is shown in drg

S&F short stiffener of length 350mm of conduit pipe of 20mm dia of wall thickness 1.6mm welded in between the legs of teapoy,irrespective of what is shown in drg

Completely removing all dents from teapoy by smooth hammering ,preparing the teapoy by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete teapoy after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

CHAIR COMPUTER, FD/E6/MAP/01 / PCH-7001D

Removing the existing torn out tapestry cloth ,pressed foam cushion,elastic webbing tape,pVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified and as directed.

Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker and complete seat and back shall be covered with transparent polythene wrap. Complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed

Removing unserviceable 5 spokes stainless steel adjustable pedestal assembly, S&F new 5 spokes stainless steel adjustable pedestal assembly to chair computer all as specified and directed by Engr -in charge.

Removing unserviceable hydraulic gas lift cylinder of chair ,S&F new hydraulic gas lift cylinder to chair.Complete all as directed and shown on drawing.

Painting to all steel portion of chair computer with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.

CHAIR WRITING ,FD/E6/MAP/12

Removing the existing torn out tapestry cloth ,pressed foam cushion,elastic webbing tape,pVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified and as directed.

Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Painting to all steel portion of chair writing with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.

TEAPOY VERANDAH,FD/E6/MAP/17

Removing UNSV top from teapoy carefully;S&F new top of size 750mmx450mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing old UNSV shoes,Supply and fix new PVC shoe suitable to each leg .complete all as directed and as shown on drawing.

Completely removing all dents from teapoy by smooth hammering ,preparing the teapoy by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete teapoy after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

Chair conference Regency mid back Godrej PCH-7002D

Removing the existing torn out tapestry cloth ,pressed foam cushion,elastic webbing tape,pVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified and as directed.

Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Painting to all steel portion of chair with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.Complete all as directed and shown on drawing.

TABLE 3'X2' WITH DRAWER STEEL FD-1008

Removing UNSV top from table steel carefully;S&F new top of size 900mmx600mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing UNSV leg from the table steel carefully by cutting the welded ends with hand held machine and S&F new leg made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth.

Removing the existing unservicable /rusted drawer ; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front.. Complete all as directed and shown on drawing.

Removing UNSV lock from drawers and shutters ;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing the old broken PVC shoes from the legs of table,S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom.

Continous gas welding to all broken joints of table in length of 1 cms

Completely removing all dents from table by smooth hammering ,preparing the table by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete table after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TABLE 3'X2' WITHOUT DRAWER STEEL FD-1009

Removing UNSV top from table steel carefully;S&F new top of size 900mmx600mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing UNSV leg from the table steel carefully by cutting the welded ends with hand held machine and S&F new leg made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth.

Removing UNSV lock from drawers and shutters ;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing the old broken PVC shoes from the legs of table,S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom.

Continous gas welding to all broken joints of table in length of 1 cms

Completely removing all dents from table by smooth hammering ,preparing the table by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete table after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

BOOK CASE STEEL GLAZED ,FD-1028

Removing UNSV lock from shutters of book case steel ;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing UNSV handle from book case steel ,S&F new 130mm long chromium plated handle to each openable shutter ,Complete all as directed and shown on drawing

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots,S&F new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape by welding . Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of book case steel carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Completely removing all dents from book case by smooth hammering ,preparing the book case by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete book case after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

Table Dining for OR's FD-165(M)

Removing UNSV top from table dining OR's steel carefully;S&F new top of size 1900x685mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing old UNSV shoes,Supply and fix new PVC shoe suitable to each leg .complete all as directed and as shown on drawing.

Completely removing all dents from table by smooth hammering ,preparing the book case by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete table after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TABLE BED SIDE (MAP) ,FD/E6/MAP/15®

S/F new top with teak wood beading made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood beading at all edges. Complete all as specified and as shown on drawing

S/F new sides with teak wood beading made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thickteak wood beading at all edges. Complete all as specified and as shown on drawing

S/F new Upper drawer made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade with bottom of 6mm BWR plywood including 4mm thick teak wood beading at all edges.Complete all as specified and as shown on drawing

S/F new Back ply 6mm BWR.

S/F new lower drawer made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade with bottom of 6mm BWR plywood including 4mm thick teak wood beading at all edges. Complete all as specified and as shown on drawing

S/F new top upper back made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood beading at all edges. Complete all as specified and as shown on drawing

S/F new handles 75mm long chrome plated of dia 8mm fixed with suitable screws.

Painting to steel frame of table bed side steel with one coat of synthetic enamel paint of existing color after cleaning,dusting and scratching the iron surface with sand emery paper.

TABLE COMPUTER ,FD/E6/MAP/03

Removing UNSV top from table steel carefully;S&F new top of size 900mmx560mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing the existing unservicable key board of table computer by removing the unsv telescopic channel.supply and fix key board attached with new telescopic channel made out of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing the existing unservicable mouse pad board complete from Table computer and supply and fix new mouse tray18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing the existing unservicable CPU stand part complete from Table computer and supply and fix new CPU stand made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing UNSV/damaged drawer complete from Table computer and supply and fix new drawer made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails.The drawer shall be provided with decorative knob. Complete all as directed and shown on drawing.

Painting to steel frame of table computer with one coat of synthetic enamel paint of existing color after cleaning,dusting and scratching the iron surface with sand emery paper.

Material and labour for painting to articles of steel furniture by adhering to following steps:- a) The existing surface of each steel article shall be made smooth by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it again to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade in each item shall be applied externally and internally to each article after applying and drying one coat of metal primer. b) The painting to each article shall only be carried out by spray machine only. c) The work will be excecuted at various units locations/residential accn or inside/outside restricted area as per user requirement.

Almirah large steel with shelves ,FD-1031

Almirah med/small with shelves steel ,FD-1032

Bed hard Steel MAP ,FD/E6/MAP/08[R]

Box kit steel ,FD-98

Chair CB steel with arms ,FD-75

Chair CB steel without arm ,FD-75

Chair computer with arms ,FD/E6/MAP/01

Chair School with hand board ,FD/E6/MAP/05

Chair steel capsule/visitor/writing MAP pipe with cushioned seat & back ,TP Godrej PCH-7003D

Chair verandah ,FD-359/19/256

Charpoy double bunk with plywood ,FD-263

Charpoy GI pipe 32 mm with nylon newar ,FD-220

Charpoy GI pipe 32mm with plywood ,FD-220

Charpoy IP folding with hard top ,FD-388[R]

Form without back steel FD-77

Locker bed side steel FD-1029

Rack 6 tier steel FD-1038

Rack shoe steel FD/E6/MAP/02[R]

Receptacle small with bucket FD-130

Table 3'x2' w/o drawer steel/Table Hav/Ors FD-1007

Table 3'x2' with drawer steel FD-1008

Table bed side FD/E6/MAP/15[R]

Table dining ORs steel FD-165

Table office clerk steel FD-1004

Table office officer steel FD-1003

Teapoy verandah FD-383

Trestle SR steel FD-1043

Material and labour for polishing to articles of wooden furniture by adhering to following steps:- a) The wooden article shall be made smooth by sanding the surface with sand paper of about 120 grit in the direction of grains of wood. b) Repeat the process with progressively finner grains with 180-220 grit sanding paper to make the surface more finer. c) Wipe out the surface and remove the dust with a fine cloth. d) Examine the surface and fill yellow oxide or wood filler/putty in the holes and sand the surface again to achieve a smooth and cleaner surface. e) Wipe it gain with cloth and apply a coat of polish and let it dry. f) Sand the surface again and apply next coat with a soft brush or cloth. g) Let the surface dry completely and apply a clear coat over it. h) The painting to each article shall only be carried out by spray machine only. j) The work will be excecuted at various units locations/residential accn or inside/outside restricted area as per user requirement.

Almirah large with shelves wooden FD-109(M)

Almirah med with shelves wooden FD-110(M)

Bed ply top with MNF set FD-246/247

Bin linen multipurpose FD/E6/MAP/09

Bin soiled linen 900x 450 large FD-15,244

Book case wooden FD-45/58

Chair dining FD-279/228/1105

Chair dining JCO/OR FD/MAP-II/05

Chair dining Offrs FD/MAP-II/04

Chair Easy FD-17/229/201/1108

Chair wooden bottom w/o arms FD-285/225/56

Chair writing FD-280/250/20/202

Hat stand with mirror FD-23/206/233

Locker wooden FD-222/54[M]

Mirror Dressing gents FD/E6/MAP/16

Rack record 6'x2'x6' WDF-42

Rack side 3 spaces wooden F-22

Side board FD-241/371/1112

Sofa chair single seater with cushion TP

Sofa set 4 seater with cushion FD-281/258/373

Sofa set 5 seater with cushion FD-281/258/373

Stool dressing CB FD-282/252/374

Stool dressing with cushion FD/E6/MAP/14

Table 3'x2' w/o drawer (W) FD-284

Table 3'x2' with drawer (W) FD-283

Table 3'x3' wooden FD-291

Table bed side FD-276/28

Table centre FD-274

Table Dining 1200x900mm FD/MAP-II/03

Table dining 6 persons FD/MAP-II/03

Table dining 8 persons FD/MAP-II/03

Table dressing gents FD-230/31

Table dressing including stool FD/MAP-II/07

Table dressing ladies with mirror FD-251/32

Table office clerk wooden DB-4314

Table office officer wooden DB-4313

Table peg FD-277/236/266

Table writing FD-275/249/268

Teapoy wooden FD-278/382/232

Teapoy wooden FD-86

PACHNANDA BUILDERS

M/S RAJ ENGINEERS

VEE KAY IND